Wyniki wyszukiwania: ldp

Fruit Washer Bowl - fits on Ender 3/K1 buildplate

Fruit washer bowl from Thorin Oakenshield. Fits on the 220 by 220 mm buildplates of the Ender 3/K1 variants.

FLSUN V400 golden PEI buildplate texture for PrusaSlicer

This SVG file goes with mcpea's 3D model of the printer made for PrusaSlicer, which although excellent was missing a proper build plate texture. More exactly, this file replaces the black build plate texture with the big white FLSUN logo…

Sovol SV06 Buildplate texture and model for PrusaSlicer/Superslicer

This is just a simple texture and model combination for your Sovol SV06 presets in SuperSlicer or Prusaslicer. All I did was adjust the z position of the stl for the bed and quickly made a texture in Affinity Designer for the texture. It…

Buildplate Level Test Print (150mmx150mm)

Two concentric squares to check if your buildplate is level or warped. Fast to print. Use this test print to check if your printbed is level and adjust your first layer height. The outer square is 150mmx150mm. Make sure to take a look at…

Buildplate holder

Buildplate Holder for bambulab plates. Fits up to 5 plates and can be printed in one piece on X1, P1 and A1 printers. If you want to support me you can join a patreon membership: https://www.patreon.com/SabreDesign Check out more of my…

NASA Fabric fitted onto buildplate

NASA fabric that fills a Prusa MK4 buildplate

Halot Mage Buildplate holder for dripping

Hey guys, This is my first model ever published so please adjust your expectations to the learning curve:) This is as buildplate holder for Reality Halot Mage. I had those in the past for my other printers and I've experienced the…

Kindersicherung für Steckdose childproof socket

Kindersicherung für Steckdosen. Die Sicherung sollte in alle EU Steckdosen passen

Custom Buildplate FLSUN 400 Prusa Slicer

I just designed this to have a nice matching buildplate. It is not in the right scale so not to use for any other things (e.g. enclosure modeling). unfortunately you can't change the colors in the slicer. What is possible is to change the…

HALOT-MAGE PRO Buildplate holder for dripping

HALOT-MAGE PRO Buildplate holder for dripping

Qidi Plus 4 buildplate adjustment Key

I needed something to make it easier to adjust the knobs underneath the buildplate while doing the paper leveling or when using the Klipper “screw_tilt_adjust” Result is this 12 sided key that fits the leveling knobs perfectly. I kept the…

Flashforge Adventurer 5M Pro 3 holes buildplate handle.

This is a model extracted from the Orca slicer model for the Flashforge Adventurer 5MPro buildplate. Has been modified to use with bigger inserts keeping rigidity, so the buildplate holes need to be drilled to 7mm. I used M3x4x5 inserts…

Corner Protection guard - Childproofing

Childproof your home! Keep your family safe from sharp corners with these easy-to-install corner guards. Simply peel and stick to any exposed corner, and they'll provide a cushioned barrier that helps to protect little ones from…

Ender 3 S1 Buildplate texture

Made two different buildplate textures for Ender 3 S1 in PrusaSlicer. Zip file includes Gray and PEI version, you can download original PEI sheet model from Calmly. To change buildplate texture, check screenshot

Bambu Lab Buildplate holder

Buildplate holder drawer style

Sovol SV06 Buildplate texture and model for Orca Slicer (BambuStudio-SoftFever)

I tried to add the original file to my Orca Slicer (BambuStudio-SoftFever) Sovol SV06 profile but it wasn't in the correct position. I modified the file until it fit. Also the numbers were not displayed so I simplified the file by…

Full size mannequin for small and large buildplates

Might see if a thick felt cover can turn it into a pinnable dress form. I used only 2% support cubic infill.

BambuLab undertable buildplate holder

Hey Folks, Here is my remix of the very nice job from Klaus. Some improvements: 4 places (not 3) Every place is 5mm shifted of the upper one, so you can see each buildplate more easily Entry chamfer to make the insertion more intuitive…

Childproof latch for cabinet, door, drawer, window...

If you got here, I can asume you child is researching every door, cabinet and drawer available in your home. That is the case of my 14 month daughter... A week ago, she opened the cabinet under the sink, got a brand new one litter bottle…

Batarang Childproof

This is a simple Batarang with no sharp corners for kids to play with. Printed without supports easy and fast. I recommend 3 walls and 20-30% infill for better durability. Disclaimer: You can not use this item to save Gotham city

Compliant Childproof Cabinet Lock

Designed to keep my child form going through the kitchen cabinets, and wearing the bowls like hats. This compliant design can be slipped over the cabinets with one hand, but is complex enough to keep my 2 year old out. This is a very easy…

Childproof TPU cabinet lock

Printed it with a95 TPU. I printe the two peaces together. Infill 100% 3 walls.

Heavy-duty childproofing drawer lock (parametric)

I've tried @eric-ao's original model, which is a great design but unfortunately it wasn't heavy-duty enough for my use-case (or I printed it wrong). Then I made a variation of my own, longer and with the bending part replaced with a…

BambuLab Buildplate Holder

i designed a Buildplate-holder for 7 Plates , designed in Stairs so you can see the front of every plate for reading or seeing the desing. I designed in 2 parts so it fits on the printbed at once. i desinged conectors as well , i did not…

Phrozen3d Sonic Mighty 8K buildplate drip hanger and foot

easy clip on drip hanger for the build plate and also works as a stand/foot for the Phrozen3d Sonic Mighty 8K

Simple customizable Box - Parametric - buildplate rotation -openSCAD

Simple customizable box designed in openSCAD Only needs a few variables changing for a custom sized box to fit whatever you need. A minor improvement with regards to lid orientation/placement versus the original but increases the…

Edge Corner Guard / Protector / Childproofing - Paraspigoli per mobili e varie

Edge Corner Guard / Protector / Childproofing - Paraspigoli per mobili e varie Easy to print, optimized filament usage (0,64m the small one) 20/01/2025 added “evo” models Resize/Scale to adjust dimensions All our designs are free to…

Childproof outlet cover (swiss) / Steckdosen Kindersicherung (Schweiz)

Push the cover into the socket, use the tool for removal (push the tool into the slot, rotate 45° counterclockwise and then draw the cover out) Works for flat and sunken outlets Stecke die Abdeckung in die Steckdose, benutze das Werkzeug…

Rook buildplate texture and model for orca slicer

Modified build plate texture of the Rook 3D-Printer for Orca slicer (maybe also suitable for other slicers) A wide variety of views of the print frames are available. Also several textures in different colours. Everything can be combined…

Buildplate Scraper

Buildplate Scraper Engineered for precision and durability, this 3D-printable buildplate scraper is a must-have for any 3D printing setup. With an ergonomic, honeycomb-patterned handle for both style and comfort, this tool is crafted to…

Parametric Ikea Skadis Board for MK3/MK4 Buildplate + SCAD-Customizer/Generator

Models This Model contains Skadis pegboard for the size of the MK3/MK4 buildplate with drillings for M6 screws customized pegboard Skadis pegboard in a triangle shape and the OpenSCAD-Files to generate your own sized boards.…

Skadis Buildplate Organizer

If you are print this design from the STLs it requires the 4 copies of the universal skadis hook and two copies of the build plate holder, one will need to be mirrored from the first. Alternatively I've included a 3mf laid out out with…

AnyCubic M5S Buildplate dripper

Remix of Flashhawks design however this one allows you to fit the case over the printer while it drip

EU-Steckdosenschloss/Kinder Sicherung/ childproof socket

Da ich ein kleines Kind nun habe musste ich mir was einfallen lassen um sie zu schützen man kann zwar welche kaufen aber bei einem Haus geht das Ziemlich ins Geld also warum nett was aus dem 3D Drucker Den Schlüssel bitte langsam Drucken…

Voron 2.4 A1 Bambu Silicone Brush Wiper With Buildplate Stopper

Added Buildplate stopper horns for Bambu Silicone Brush Wiper

Hexagonal Hole Mounted LED Strip Bar for MK3S - Fits on Mini and MK3S Buildplate

I saw Martin44's LED Bar which mounts into those mysterious hexagonal holes on top of the Z axis, but it's too big to fit on the MK3S buildplate as-is. I split it into three pieces - it fits on the Mini now - and added pin alignment holes…

Endstop buildplate Voron 2.4 350mm

This vertion now you can print without supports, easy setup, stronger that the first vertion. BOM 2 M3 x 8mm 2 M3 Hammer Head T-nuts

Formlabs Buildplate holder

A little holding bracket for formlabs form3 buildplates. Can work free standing as a foot to use on the desktop, optionally screw mounted to the desk. Or alternatively they can be mounted to a wall for vertical storage. Prints without…

Childproof Safety Lock - Shortened Height Remix

I printed a bunch of eric-ao's safety locks for my own drawers but ran into a few cases where the gap I had was just too narrow. Simply height adjustments to make it fit in some tighter spaces more easily. Printed at .2mm layer height in…

Tire Falken Wildpeak

I also really like tire patterns when it comes to gears, so I'm experimenting and learning how to model them. For car modelers, I didn't make a scale, Tire dimensions are 83mm wide and 31mm high, rim diameter 43mm This time it's the…

Sovol SV06 Buildplate texture for PrusaSlicer/Superslicer

Remix of an existing texture but with the grid removed because it was annoying me just like the actual grid on the build plate. Texture is in the .zip file

Ender 3 V2 Cura Upgrade (E3V2 digital Buildplate)

Deutsch: E3V2 Modell als Cura Röntgen-Buildplate einrichten !!!UPDATE!!! Scheint nicht mit Cura 4.11 zu funktionieren. ich arbeite an einer Lösung! HALLO COMMUNITY ICH WOLLTE EUCH HEUTE MAL ZEIGEN WIE MAN SICH DEN ENDER3 V2 IN CURA…

Buildplate Endstops for Qidi X-Plus 3

For the last few weeks I've been annoyed that 280x280 buildplates are only available from Qidi and not from third party. But now I have found a solution to my problem. There is a plastic cover around the heatbed that is not needed and can…

[revised] Schuko childproof dust cover

Schuko childproof dust cover A childproof version of the Schuko dust cover. This cover can be completely retracted into the socket and can only be removed with a tool. Version 1: Dust Cover with a hole, so you need an “Key” to remove it…

mate jabali / wildpig

este mate debe llevar soportes de arbol con angulo de 45 grados para poder sostener de manera apropiada la boca y que salga todo bien, por el resto no lleva mas complicaciones, los soportes solo en la base, no en el modelo, asi lo imprimi…

Sovol Zero Magnetic Buildplate Holder

Magnetic plate holder that can be put on either side of the Sovol Zero. Model needs 5x 8x3 magnets. No supports needed. Printed with 10% infill.

Sovol SV04 Buildplate Logo (Cura 5.0.0)

I am currently using Cura 5.0.0 as slicer. Unfortunately Cura does not show any logo for the Sovol SV04 on the respective buildplate. Therefore, I have created five logos: SV04_Dual_Mode SV04_Copy_Mode SV04_Mirror_Mode SV04_Single_Mode_01…

Gloomhaven Enemy Number Tokens - For resin printing FLAT on buildplate

Enemy Number Tokens for Gloomhaven Miniatures. Print on a resin printer, FLAT on Build Plate All you have to do is drag and drop the file into your slicer! No supports necessary! All you have to do is get your scraper tool under the…

Hula Buildplate Holder Bambu Lab H2D H2S H2C – improved

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … I found a similar model, but it was too complicated, too…

Coldplay logo display decoration

Print with a color change for the logo. Print both parts laying flat. Required hardware: 2 M3x6mm bolts Also check out the same stands for Billie Eilish and Arcade Fire on my profile

Step Files and sldprt files of Dovetail Snap Clip

Step files and sldprt files of these if you want to use them in a design

Zombicide Green Horde Hedgerows (Full 1 Piece set - ONLY for buildplates bigger than 250mm)

This is a complete set of 3D hedgerows for Zombicide Green Horde. ALL 9 tiles (V side only) have had their hedgerows modelled in 3D for a more enhanced game. PLEASE NOTE: This set is ONLY for build plates that can print 250mm or larger…

Bambu Lab X1C buildplate holder (2 pices)

I wanted to accommodate a lot of build plates, so I designed a new wider holder. I prepared two types of parts, one with a notch that penetrates to the back and one that does not. If you choose one of the two parts, make two. Generate…

Voron 350mm Buildplate Storage Holder

New version for up to four 350mm buildplates, plus added Voron logo ;) Accordong to Voron Design licensing, this is also GNU GPL 2.0

Collapsible childproof barrier

This barrier was designed to block an 80 cm wide doorway. Recommended equipment (but you may improvise): 7x 50 cm wooden pole (13 mm diameter) 2x 100 cm planks (15x30 mm cross-section) 17x M3n Nyloc nuts 14x 15 mm M3 screws 2x 20 mm M3…

Childproofing drawer safety lock -- long hook, possibly more heavy-duty, parametric

Remix of eric-ao's hook, with a "spring" for imho better resistance against bending and for 100% infill + fusion360 src

Elegoo Neptune 4 / 4 Pro sequential printing buildplate

Consider tipping me 100g of filament for prototyping if I've saved you some time :) really appreciated Download the STL and place it under Upload to Printer Settings > Basic Information > Printable Area > Model > Load in OrcaSlicer Set…

Creality buildplate holder

I received an additional build plate for the new K2 Plus. I have ordered another one. I have designed a holder so that the buildplates can be stored properly. One with the Creality lettering and one without the lettering. Multicolor…

Prusa MINI Buildplate Holder

This is a simple holder for Prusa MINI buildplates. No supports required.

SV08 Buildplate Stop, and Pressure Sensor Extensions for Bed Taco Fix

These files I've created to be able to restore my buildplate stops as well as my pressures sensor capabilities after doing a Bed Taco Mod to fix my warped buildplate. I've added holes to aid in securing the stops to the buildplate if…

AMS (2 Pro)-Rack with 3-fold or 5-fold Buildplateholder

AMS (2 Pro)-Rack mit drei- oder fünffachem Bauplattenhalter Dieses AMS-Rack wurde für das AMS der ersten Generation (alle Varianten) entwickelt und ist mit entsprechendem Bauplattenhalter (siehe Druckprofile) jetzt auch mit dem AMS 2 Pro…

FNT Prusa MK4/CoreOne Shelf_Open Simple buildplate holder

FNT Prusa MK4/CoreOne Shelf_Open Simple buildplate holder (FNT Prusa MK2.5s/MK3/MK4/CoreOne Simple Plates holder with button) FNT Prusa MK4/CoreOne Simple buildplate holder A new addition has joined the popular family of FNT Build Plate…

Zombicide Green Horde Hedgerows (Full 1 or 2 Piece set - For buildplates 200mm-250mm)

This is a complete set of 3D hedgerows for Zombicide Green Horde. ALL 9 tiles (V side only) have had their hedgerows modelled in 3D for a more enhanced game. PLEASE NOTE: This set is a set that have been designed for smaller build plates.…

Supportless buildplate for Stealth Press Zero

The Stealth Press Zero is a very fun and minimalistic build. The one thing I didn't really like is the way the stock build plate prints. It takes a lot of cleaning up to make smooth for the washer. This remix modifies the recess to bridge…

buildplate model for creality ender3 V3

This is an exact model of the Creality Ender 3V3 build plate that I use for my Orca slicer. All text and icons on the plate are visible in the slicer. I created the model with Blender 3.6. I also created an “empty” texture because the…

TiltMyBuildPlate - Photon Mono 4K

This is a quick print. The build plate hangs loosely over the vat to allow for additional resin drainage. Fits my Anycubic 4K Mono nicely. I printed this in PLA.

Buildplate storage for the Prusa Core One

My custom solution for storing build plates, nozzles, and assembled hotends for my Prusa Core One. Since the Core One is quite compact, I designed the model in three parts, assembled using 4 to 6 M3 screws and threaded inserts. It…

Simple Core One L / Large Buildplate Holder

Simple design with 7 slots. Made to sit on a workbench or shelf near the printer. PETG / PLA default settings should be fine.

Wall mounted buildplate holder

It's a wall mountable buildplateholder. You need 4 screws to mount it on the wall. The nine slots are 4.2 mm wide. Glasplates should also fit. You will need a lot of filament :) *01.23.2023 Added a variation with 4 slots which are 3mm wide.

Buildplate Storage Holder 300mm

Sooner or later after getting a new printer, everyone is getting “better” or different buildplates, for different materials, or just some that work. So after I got my K1 Max, I immediately got a PEI coated flexplate & an FR4 one, just so…

JP ModOr buildplate module 40 for bambu plates

This is the module 40 for the buildplates from bambulab. It fits the 256x256 buildplates. The module holds up to 4 plates. can be made bigger or smaller upon request! You dont need any screw's or bolts to assemble. print it and build it.…

50 mm Pfostenkappe für PETling an Gasschildpfosten PET Halter Pfosten Kappe Geocache Cache Pole Cap Rohrpfosten Container Road Sign Cap Gas Sign

Deutsch: Diese Pfostenkappe hat nicht das Standardmaß für die Rohre von Verkehrsschildern u.ä. von 60 mm, sondern 50 mm Innendurchmesser, geeignet für die Pfosten von z.B. Gasschildern wie auf dem Foto. Umlaufend ist eine kleine Wulst,…

1 Glass + 2 Spring Steel Sheet Buildplate Bed Plate Holder Stand 235mm for Creality K1 and Ender 3/Pro/Neo/v2/v3/S1/5 - Elegoo Neptune 2/2S/2D, 3/Pro, 4/Pro - Flashforge Adventurer 5M/Pro - with Built-in Feet

This model is a remix of t3chguy 's " Sheet Holder Ender 3 - 235mm Plate Glass Spring Steel Mix " !UPDATE! I've added additional versions with longer support feet, 15mm and 20mm! If your table/desk is extra wobbly or you are prone to…

Lock for childproofing a closet door

My 2yo just figured out doorknobs, and he got into the cleaning supply closet the other day. I was going to make a doorknob cover, but then I had the idea of making a sliding lock that is out of his reach. The result is alot cleaner…

Elegoo Saturn 3 Ultra Buildplate Spring

A Spring loaded Plate for easier Leveling on the Elegoo Saturn 3 Ultra

CR-6 SE Flexible Buildplate Alignment Tabs

---UPDATES--- 03/18/2022 - A couple of people mentioned the rear left alignment tab was making contact with the Y-axis stepper motor. I am not having this issue because I am using silicone spacers that measure 18mm in height. I have added…

Anycubic Photon Mono 4 Buildplate Hanger

Most build plate hangers tilt along one axis, letting resin drip off one edge, but I wanted faster drainage. This design tilts the plate along two axes, so excess resin runs off a single corner instead for faster drainage. It prints…

BuildPlate Stand - MercuryOne - ZeroG

It is a buildplateholder for MercuryOne (Ender5 Plus) consisting of 4 parts to print it on any common 3D printer. The connectors are glued in and the edge should also be in the best case. Printer settings: Material: PLA+ Infill: 10%…

Elegoo Saturn Ultra 4 Buildplate holder permanently installed

Elegoo Saturn Ultra 4 Buildplate holder permanently installed (prt- and stl-file)

Parkside 20V battery adapter COVER with BUILDPLATE

📝Description This is a 3D-printed cover for my Parkside power plug adapter for Li-Ion 20V battery that turns it into a portable power source . This variant allows you to use my plug with your own extension attached. You have to download…

Buildplate and Toolstation

A Remix of daclasen Remix with 5 Buildplates and more Toolholder

Build plate holder - Prusa MINI/A1 Mini 12 Buildplate REMIX

Simple build plate holder for 12 Buildplates. Works OK with Bambu Buildplates.

Childproof Rocker Light Switch Cover

Simple rocker-style light switch cover that allows functionality by using a pen to activate/deactivate the switch through the 10mm holes. This print is thin enough to be tileable with your average light switch setup (you use them…

FlashForge Adventurer 5M Cheap Buildplate Handle

I bought some cheap chinesium build plates off aliexpress. the ones with the pretty patterns... yeah they dont have the same hole pattern as the original build plate. So I designed a handle to fit em. It takes two M3x6mm bolts and nuts to…

Shuko plug childproof cover

European "Shuko" childproof cover. No support needed, bridges on. print it upside down.

Ikea Kallax Knob Climbing Hold ("childproof")

A simple cabinet knob fit made for an Ikea Kallax door. Design goals were: low profile so that small children can't get hurt easy. small children have no chance to open the door parents still can with the right amount of pressure and…

Quick to print BUILDPLATE SCRAPER

Scraper to remove residue or prints from buildplate Prints very quickly because it is thin, but still has good strength I used petg for slightly higher heat resistance, but any rigid filament should work (not TPU, ASA, etc.)

Childproof Outlet Cover

I wasn't overjoyed with the standard plug-in outlet covers for long term childproofing, so I designed a more nuclear solution. Simply print this out, remove the offending outlet plate, and replace the plate with this cover. It is designed…

ELEGOO Centauri Carbon Buildplate

Model of buildplate for ELEGOO Centauri series 3d printers based on .stl file from slicer.

Buildplate Stacker

I needed a simple system to keep my plates stacked, so I made this. You can print as many as you want and stack them together. Each one takes 8 plates. Fits both bambulab and prusa plates.

AnkerMake M5C buildplate guides for square Plates

If you want to use Buildplates from a different Manufacturer or if the original guides are broken. Best to print it in durable Material (ABS, ASA) I used PETG to test the design and it's still ok. But depends on the Buildplate…

BIQU CryoGrip Pro Glacier Buildplate Handle

235x235mm version, printed in ABS. Can face either direction—your choice.

childproof stove knob

Introduction When your children start to flip from the back to the belly or vice versa, it is time to start to secure whatever you might have in your flat. Things are slobbered on, things you thought lost appear in dipers. Fast forward a…

Prusa Core one Left side Buildplate holder

Prusa announced the Core One and published the side panel .STEP files, which I used to design this print-sheet holder. The file must be disassembled into its parts in the slicer. The largest part requires a lot of support, and I’ll try to…

AnyCubic M5S Buildplate dripper

You just need 2x M6 25mm bolts 3x M6 Nuts(2 of them selflocking is optional) 1x washer Print it with the holes flat on the buildplate with at least 4 perimeters, i used 6 on a 0.6mm nozzle! Category: 3D Printer Accessories

BUILDPLATE DRAIN FUNNEL - RECTANGULAR

BUILDPLATE RESIN FUNNEL

Buildplate and Glasstop Holder right side

Remixt model of the Buildplate holder for everyone who want them on the right side without the holder for example clue or other tools.

Artillery Hornet buildplate texture and model for orca slicer

Decosnap Buildplate holder (Multiboard Build plate holder)

Inspired by @Sionide21_99236 's build plate holder, I designed a multiboard snap version optimized for support-free printing. This holder features a reinforced snap interior for upright printing stability and a flat side to eliminate the…

Sovol SV08 Buildplate Stop for Silicone Bed Taco Fix

I have modified the original model because after printing it it did not fit on my machine. Upon overlaying the model on the bed data I found that it would not fit the magnetic sheet without trimming the corner. So I made this one that…