Liczymy pasujące modele…
FilaMan Revamped This is my version of a scale for the FilaMan project. Its an NFC powered automatic scale for Spoolman . I was going for a clean elegant look, hiding as much of the electronics and cables as possible. Please check the…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Zalman Z3 Plus HDD rails Yes support PLA
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
(German below) English: Because I didn't like to screw or glue our new room ceilig, I wanted to attach our smoke alarm onto our nice Paulmann URail lightsystem Trails. For an easy attachment I used the genius but simple hookpart from…
Wydruk około 2,39 €–2,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
First Model uploaded so if there is something I could do to make my this post or my future post better please let me know. Feedback is highly appreciated! Model is approx. 104mm. Supports will be needed. All one piece nothing to glue or…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
The myth of Seolmundae Halmang is well known in Jeju. According to this myth, Seolmundae Halmang (Grandmother Seolmundae) could reach from Seongsan Ilchulbong to Guan Tal island at Aewol in a single stride, and with two strides to Mount…
Wydruk około 3,63 €–4,44 € nettoWstępna wycena jednego wariantu
Motivation For the proper installation of the Paulmann LED Set 3x3W (Mirco Line) I needed a housing for the assembly into a hollow wall. I also wanted to place a Shelly switch into the housing, so some additional space was added for…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I remodeled the original cover to be an able to reprint it with a darker or more light absorbing material (e.g. silver, black) - so that less light gets out of this genius hallway light. original Product: Paulmann 1x 107 lm LED Set
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
Scale as necessary, recomended 1mm height.
Due to the Heatplate in my DUAL Filament Dryer from Sovol 3D, I made a StandOff for the DryBox. The StandOff has a 20 mm height, to make sure that the Dryer has enough clearance for ventilation. Share your make, that makes me more happy…
über likes makes und follower würde ich mich sehr freuen, Peace MazZe I would be very happy about likes makes and followers, Peace MazZe
I broke one of my wiremanager from my desktop, so i took the caliper and created the model. Then i redesigned it for better printabiliy, with hight strength and a nice design. You have different angles of the shape, smallest and best…
This Beyblade Launcher is designed to be as reliable as possible. It uses bearings and magnets for the stoper mechanic to reduce friction and down wear. You need 2x 608RS Bearings and 2x 8x3mm(or 2mm) Magnets (One 2x10mm Screw for the…
(17/01/2025) Update! My first one of the year XD I've fixed the hips loose joint, and the tight shoulders. Everything should fit properly now. (24/01/2025) Update! Split the arms and legs into snap fits, allowing more strength and safer…
A simple adapter for connecting a tube (4 mm) to the printer's filament feeder, allowing you to connect a dryer or filament box not in the original location on the printer. The hole for the adapter is 6.5 mm in diameter and without thread…
A small Jewelry Devil Mand Stand, to make it all stand out a little more. Was easy to print, didn't use any support material, used PLA+ Cool White, and then just hung my Jewelry. Now he holds my belongings in a nice and awesome spot.…
The Mailman from Bikini Bottom
gedruckt aus PLA, 1,2mm Wandstärke, 17% Füllung, Muster: Dreiecke (mit zwei Linien) Eine separate Schraube zur Befestigung der Kameras wird benötigt evtl. muss der Bügel von einigen Schrauben entfernt werden Ich habe oben (beim Druck…
The perfect cooler for when you say you're having ONE beer and actually mean it
This is my first try with hueforge. I have printed this with BambuLab's X1 Carbon scaled down to 60% an it turned out great. Don‘t have an MMU or AMS? No problem! Just change the filament manualy. There are only 3 changes for black, grey…
2 versions: - 8u stackable - Nonstackable
Dieser Beitrag könnte für alle interessant sein, die an ihrem Prusa mk3s dieses YZ-Case von Fuhrmann verbaut haben und mit dem Übergang der Kabelstränge in das Gehäuse nicht ganz glücklich sind. Auch ich habe vor kurzem meinem mk3s dieses…
A wall mount for your DYMO label printer. Compatible with LabelManager 280.
A Gridfinity holder for the Dymo LabelManager 160 . Takes up a 3x5 grid
Pripyat Stalker 2 Almanac Stand
bilyalı rulman iç çap 20mm dış çap 80mm, ball bearing inner diameter 20mm outer diameter 80mm, محمل كروي القطر الداخلي 2
Download free Jackalman Lunatacs Thundercats Villains collection busts fanarts by CG Pyro STL 3d priting collectibles If you are a Thundercats lover you can't miss this collection, join my patreon and get this great character as a reward.…
I love the Bellman CX-25P cappuccino maker - it has elevated our camping latté-making skills and the steaming wand is so much better than boiling milk in a saucepan! My only complaint was the lack of a funnel to make pouring the coffee…
Kabelmanagement 19 zoll Rack
This is a simple model for a Colman cooler drain plug. It should also work with other cooler brands assuming that the plug diameter is the same. I printed this with PolyFlex TPU95 for good flexibility and rigidity.
Nachdem ich meine Google Pixel Watch 3 bekommen habe, wollte ich eine schönere Lösung als nur den lose herumliegenden Lade-Puck. Das Ziel war es, einen funktionalen und gleichzeitig eleganten Ständer zu schaffen, der die Uhr sicher hält…
This is a replacement roof for Walthers HO scale Pullman sleepers. Based on rebuilds the Southern Railway made starting in the late 1940s. See car diagrams from southern.railfan.net for specific car configurations. Model is a work in…
GoPro Mount for standard gopro case. You only need a (I think )M5 nut outer diameter 8mm. This mount is designed for the Cullmann nanomax 260 and works with the original GoPro screw. I assume it fits other cullmann tripods too but I dont…
Made it slightly more sturdy than the original and slightly increased the grip. Prints without support
Automatic Klipper/Spoolman configuration with RFID-tags This model is part of a system I use to select Spoolman spools from RFID tags attached to spools in klipper. Klipper can then verify that the right filament is used before printing…
Die 7 Teile ausdrucken (oder 8 mit Zugring) . Material am besten ABS oder PLA (PETG oder PC geht natürlich auch) Füllung min. 15% Rückseite 01 flach hinlegen, die 4 Gliedmasse einsetzen ( sollten beweglich sein) . Zum eventuellen…
Use this file instead of the “ Spinner_Outside_V4.stl” to be able to launch Metal series Beyblades . There are 3 versions of the spinner. "Spinner_Outside_left_and_right" can be used for Beyblades that can spin only to the left or only to…
Necessary equipment for longer RC expeditions. Not cooling. Maybe next time. You will need (8) M2*5 (2) Hinges 8x10mm ( https://www.aliexpress.com/item/1005005574915000.html ) UPDATES 2025-03-09 - FridgeS_bottom_v2 - Added holes for…
I made a sturdy tripod plate for my old Cullmann Video 3200 tripod. It's almost like the original plate but without the pin. Use a ¼" photo screw and a washer. I've added also the Fusion360 project and the STEP file in case you have to…
Small is for two wheel drive, large for high horse power tractors. May take effort to get to pivot first time.
Can be used to hold DYMO label manager 160/280 on multiboard. Connectors attached, can be screwed with 6mm hex key. Two versions available: with open or with close front side. Bottom side hole size is 46mm x 80mm. Top side hole size is…
This is a Honeycomb Storage Wall compatible holder for Dymo labelers. The specific model I made it for was the LabelManager 160 but any similarly shaped label printer ought to fit. Made to use minimal plastic and allow for quick grabbing…
📬 Garden Gnome Mailman – Special Delivery! ✉ Say hello to the most dependable postmaster in the garden realm! This charming Garden Gnome Mailman is ready to deliver smiles, love letters, and magical messages—one tiny envelope at a time.…
These are drawing stencils of the East Berlin GDR - Ampelmann and the rare Ampelfrau (Traffic Light Man and Woman) and Signals from Tram. I created it in its original size, you can simply scale it to the size that fits your needs.
Replacement leg for the Zalman Z3 housing, in order for the latch to fulfill its purpose, it must be printed sideways with supports. I recommend printing in PETG.
I remixed it to accept screws so it can be mounted directly to the wall. Thanks to the original designer!
-Different base plate for this awesome sharpener with integrated table clamp! -slider with tighter tolerances -clamp holder with tighter tolerances and M6 instead of M8 -rod holder for 8mm linear bearing (press fit) rods:…
This is a so you can mount drives in a Zalman Z11 Plus in case you have lost the included parts. You will also need to purchase some #6-32 screws that are 3/8 inch long. You will need four of them per drive. It is recommended to print…
For the new 65W power supply on the Microsoft Surface Pro 7, the cable management systems unfortunately no longer fit, as this is ~3mm thicker. Therefore, I have implemented my idea of it. It holds very tightly by itself for me.…
Bought my PC second-hand, one of the HDD mounts were missing. I modelled a replacement based on the one I had and tweaked it to be more 3D-printing friendly. Recommended print settings PETG It might work with PLA, but it might not be…
Small Spool holder designed specifically for the mini sized spools used by Taulman for their Nylon filaments. Also works well for rolls of solder. Print in the orientation best for your printer using hot, fat layers for the strongest part…
Adapter to fit an oldschool Zalman CNPS 9000 CPU cooler onto a newer 115X Socket like 1151 in my example. I used a generic backplate which accommodates the m3 screws. Just normal nuts with a non electric material inbetween the mainboard…
Print it with ABS for a high toughness. Next to the print you need a screw. With UNC 4-40 threads. Like this: https://www.amazon.de/gp/product/B01N1MYQX0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 The hole at the top of the plate is…
A statue of german communist Ernst Thälmann. IThe original is found in Berlin.
The Mercedes-Benz 600, also known as the W100, was a state-as-art vehicle crafted by the Daimler-Benz during the 1960s and 1970s. This stylish vehicle was used worldwide for and by the upper echelons. It served as an epitome of…
I've used some glue strips to attach it to the wall. STEP file is included if you want to make changes, eg. holes for screwing it onto something.
This small fixing eyelet makes it child's play to attach decorations to the URail track system from Paulmann. The clip is inserted into the lower guide of the track and automatically wedges itself into the track when the eyelet cap is…
Pegboard holder for a Dymo Labelmanager 160, designed for 1" spaced pegboard holes.
Keine Lust mehr auf Kabel hinter der Platte? Dann ist es an der Zeit, dass du meine Kabeldurchführung probierst. Diese Kabeldurchführung ist für ein Loch von 54mm Durchmesser geeignet. Schau dir auch meine weiteren Kabeldurchführungen an,…
Meine Tochter wünschte sich eine Ablage für ihr Handy, was sie neben ihrem Bett an die Wand schrauben kann. Den Schreibfehler hab ich in der STL schon korrigiert. ;-) gedruckt in PLA, mit 15% Infill, 0,2mm Layerhöhe Für das…
I simple adapter ring, used as a pair, that snaps on a Taulman 0.5 kg (1 lb) filament spool to allow use in the AMS. The Taulman spool is wide, so the adapter snaps on so as to be toward the inside of the spool - see the photos. There are…
This is a simple funnel to make it easier, cleaner and quicker to load coffee grinds into your Bellman CX25P coffee maker. Simply load your grinds, give the funnel a twist and the internal wipers will level and smooth off the grinds to…
In a trip to Berlin I found some shops whe this trafic ligh signal was being sell as a souvenir. I also remember the high prices of everything there.... Because of that I decided to create the model from a picture I took and create my own…
Zalman Z3 Plus HDD rails remix. The connection between rails and a HDD has been replaced with a bolt connection.
📬 Mailman Garden Gnome – Charming Postal Courier Figurine Deliver a little joy to your prints with this Mailman Garden Gnome ! This friendly little courier is on his daily route, proudly holding a letter in one hand and a bag full of mail…
Bellman coffee maker infill helper. Print Settings Printer: Prusa Mini+ Rafts: No Supports: Yes Resolution: 0,2 Infill: 38 Filament: Das Filament PETG Notes: Print with supports upside down. Printtime around 3h. Category: Hand Tools
Keine Lust mehr auf Kabel hinter der Platte? Dann ist es an der Zeit, dass du meine Kabeldurchführung probierst. Diese Kabeldurchführung ist für ein Loch von 64mm Durchmesser geeignet. Schau dir auch meine weiteren Kabeldurchführungen an,…
Der Kabelwickler V2 ist für längere und dickere Kabel gedruckt mit 15 % Infill und einer 0,4 Nozzel über likes makes und follower würde ich mich sehr freuen, Peace MazZe
I modeled this after a broken door catch from a 2008 TrailManor 2720. It's part #18073 in the 2013 parts catalog. I made some assumptions since I didn't have the whole part, but it works as intended using the OEM roll pin and spring.…
Just a little adapter plate to be able to use the Tripod Mobile Phone Clamp V2 by Stamos with the quick mount system of Cullman Nanomax tripods. When assembling the phone clamp, just use this instead of the threads insert and you are good…
silindirik rulman, silindirik rulman, silindirik makaralı, Zylinderlager, цилиндрический подшипник, roulement cylindrique
In a trip to Berlin I found some shops whe this trafic ligh signal was being sell as a souvenir. I also remember the high prices of everything there.... Because of that I decided to create the model from a picture I took and create my own…
Inspired by http://www.thingiverse.com/thing:1360118 Spool holder to hold your Taulman filament. Allows the acrilyc door of the printer to close (see 3rd pic). Designed on Fusion 360. I used 70% infill on mine. Enjoy! Category: Other
Print 6-8 item and plug it on the standart plug After it install the front panel into a standart holes on the case
the shorter piece is intended to be squared off, put taller piece on same mark on panel leg for perfect .25" crest the shorter piece is intended to be squared off, put taller piece on same mark on panel leg for perfect .25" crest. 1"…
Fix your flash light onto a Cullmann tripod. Printing: PET, ASA or PLA 0.3 mm layer height 3 or more perimeters
Print it with ABS for a high toughness. Next to the print you need a screw. With 3-8 inch threads. Like this: https://www.ebay.de/itm/182496907997?hash=item2a7da9d2dd:g:c8YAAOSwAldZ0I8g The hole at the top of the plate is tight. If you…
My old Holman 20m retractable hosereel bracket failed from UV exposure and weight of the reel. I designed a direct replacement that works well. I've only had it in use for 2 weeks so far but seems to be holding up well. Printed in PETG…
I use M3 screws and nuts.
Bu model 3 adet rulmandan oluşup küçük ve ergonomiktir. Rulman kapaklarındaki rulmanların darbesini ve frenlemesini önlemek için kapakların iç kısmında bir kırılma meydana gelir.
Easy and cute model of gentelman chameleon u can change size as much as u want use 15% infil and normal suports ! look and second photo and do it to make model print better ! print quality is bad because it was printed with wet filament…
Holder for Multiboard using push-fit
Storage baskets I made for hanging out in the pool. Covered basket printed in ASA has been full time installed for several weeks thru 100+ degree brutal summer sunny days with 0 issues. Sides are glued and bolted on with 2 20mm M3 screws…
Nobilmantis il Signore del Mare With this model you have the possibility to make all the recolor you want, if you print it share your creation! 3d scanned model
This vent cover on my TrailManor 2720 was falling apart, so I made a new one. It's part #30028 MA102LW Louvers in the 2013 TrailManor parts catalog. Probably also #30030 MA102LB if you print it in black. It's the louvered vent cover for…
This is my take on Jackalman from Thundercats. You may need to rescale this design to fit your needs.
This 3D printable adapter allows you to power a DYMO LabelManager PnP using a standard 9V battery , as a direct replacement for the original internal rechargeable battery. If your original DYMO battery is no longer working or holding…
After several years the plastic wall mount on our Holman Hose Real Broke (snapped at top and bent over). This reel: https://www.holmanindustries.com.au/product/20m-retractable-hose-reel/ These things weigh a lot, especially when full of…
Impreso con soportes normale. Este modelo esta modelado de cero usando Blender, no usa IA en ningún momento.
Introducing the Hellmann's Ketchup Bottle Stand – optimizing your dining experience. Fed up with the wait for ketchup to reach the nozzle? This stand turns the bottle upside down, ensuring instant pouring from the nozzle. No more delays.…
A water sprayer holder replacment for a holman water sprayer wand. source files for easy resize for a broom etc.. I printed in ASA with 15% and 2 walls and it seems to be fine
Thomas Wayne, Jr. , also known as Owlman , is the eldest son of Gotham 's wealthy Wayne family . Motivated by his belief in his parents' mismanagement of their fortune, he orchestrated their murder, along with that of his brother Bruce ,…
über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Replacement case for Zalman or iODD external hard drive.
