857 modeli
I modified Lorenzo Gonzalez's lovely Reloading Die Organizer to work better with my pegboard, plus a couple other minor improvements: Changed the hole spacing to 8", to match US/Canada standard peg board (Lorenzo has a version like this…
Wydruk około 5,36 €–6,55 € nettoWstępna wycena jednego wariantu
Simple stand for holding .45 ACP rounds during manual reload. Easily modifiable. Print instructions Default settings will do fine.
Wydruk około 10,05 €–12,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Minimalist reloading tray for holding .45 ACP rounds. Based on the 9mm design I found here https://www.printables.com/model/218307-9mm-reloading-tray-25-count but I simply needed a .45 ACP version so I created this one from scratch. Easy…
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
Reloading tray for .338 Laupa Magnum. Fits also for smaller caliber.
Wydruk około 4,90 €–5,99 € nettoWstępna wycena jednego wariantu
.3mf files were sliced in Prusa Slicer for a MK4S, so you may have to adjust settings as needed. .25mm Structural standard settings Gyroid infill pattern at 15% HF 0.4 Nozzle 230/225 Nozzle temp 60 Bed temp There is a color change for the…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
I didn't like how the buffer held on (barely) to the printer, doesn't work with the loading fork, or was in the way when printing without the MMU. After trying other solutions without satisfaction, here's my attempt to fix all 3! More…
Wydruk około 6,91 €–8,45 € nettoWstępna wycena jednego wariantu
I designed this holder to hold small sample perfume bottles that my daughter manufactures and sells, but I noticed that it also makes a good reloading block for smaller diameter cartridges like 223, 32-20, and 9mm. Print Settings Printer…
Wydruk około 8,84 €–10,80 € nettoWstępna wycena jednego wariantu
Update(8/6/23) : Added a low-interference version for anyone having problems with collisions with their toolhead cover. This one is harder to print, but it should solve the issue for people where they get rubbing with the support arm.…
Update (5/3/23): I would now recommend that people consider trying the ShortStack Remix linked in the 4/17/23 update directly below if it meets your needs. Its been used for a few weeks with decent success, and seems mostly equivalent to…
The 🥰 BoxTurtle's 4-in-1 hub can be a bit “ temperamental” 😖 when loading filament in certain situations (especially on lane 4 ) with the filament getting caught and stuck in the bearing recess at the end of the filament path. There is…
Attention! If you have a Prusa XL, you'll want to check out my new loader that mounts to the frame and is always at the ready: Also, be sure to check out the remixes for some great optional parts! No XL? How about Core One INDX? About…
I didn't want to make 4 differents projects for parts I don't know, if they will print fine. So here you have fixed models from the game, the raider-style power armor, X01, T51 and the T60 - all posed like in the loading-screens. I hope…
All, this is not a remix of another's but was purely inspired from an online video short. Please go to https://www.printables.com/model/590620-brain-teaser-54-pcs-puzzle first before downloading this model. Her posting came before mine,…
Zum deutschen Originaltext gehts nach unten! -------------------------------------------------------- Push your MMU3 on the next level! You have an original Prusa MMU3? THIS is your musthave! Do you have an MMU but you are annoyed by the…
This is the working cannon , with an added autoloading mechanism. It has a spring to shoot cannon balls. Use the hinge to aim precisely. Print as many cannon balls (included) as you need. Print it as a toy for your kids or present it to…
A rip from skyrim, the loading screen in which alduin sits on a wall.
UPDATE! V2 now with fancy brick texture! 🎉 This self-loading dice tower can re-roll your dice by simply pressing the handle. Also works as a regular dice tower. Printing I used regular PLA for this print. No supports are needed, except…
Simple funnel that presses onto the end of a 4mm PTFE tube so it's much, much easier to load 1.75mm filament into the tube. I've been using this for years anywhere that the printer has a PTFE tube as the inlet for filament and it makes…
Threading the filament into the buffer is still very awkward for me. You have to remove the segmenter, thread the filament around the roll and then push it up to the MMU, start the loading process of the MMU and then reinstall the…
I've included two version of the model. One is a low poly version which was ripped straight from the game files. The other is a subdivided version of the same model.
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
Similarly to remix from @ticat_105850 , this remix significantly simplifies the insertion of the filament into the buffer (but uses newer R4 segments). Simply insert the ribbon fully into the cassette, push filament all the way into the…
This is my prototype version of a DIY Loading Coil for HAM Radio. (UNTESTED) It is a glue together design for the 3 main coil parts (bottom_coil, main_coil, and top_coil). The coil caps, and radial ring can be screwed on and off via the…
Include two versions of the file one which was ripped straight from the fallout 76 game files and one that's been heavily subdivided using Blender.
I've included a low poly version that was ripped straight from the game files and a subdivided version.
Separating trays for reloading brass, pulls out 45, 40, 9mm, and I added the separate 380 version. You want to stack them as they are labeled as follows, from the top down: - 45, 40, 380, 9mm, and base. The trays stack, just pour in the…
This is a remix of a model I got from Thingiverse a long time ago. I can't find the original model anymore, but this has been completely redrawn in Fusion360. The Fusion file is parametric. I've tested it a few different ways and changing…
Summary Brass Prep Station For the gear box plates, recommend a 20% infill and 3-4 perimeters or walls. For the gears (main helical gear and small helical gears), 4 perimeters and 70% infill plus 5 top and bottom layers. For the housing…
Update Aug 12, 2025: Added a clip that prevents the spool holder from wobbling when not loaded. V2: Has arm that can be attached to guide filament and prevent it from unwrapping. A spool holder for the AD5M that feeds filament from the…
.223 Remington/5.56 mm X 45 mm labelled loading block is sized for the .222 Remington cartridge and works with all of its longer or equal length derivatives. 20 mm clearance is provided for powder funnels. Look for my .221 Remington…
Front loading desiccant boxes for AMS. These slide in and out without having to remove the filament to change out the desiccant and I also added a hole for an hygrometer. Hygrometer I used is 44mm in diameter…
Small but handy powder funnel for Luger 9mm and .223 Remmington / 5,56 NATO. Fits resized cases perfectly. Designed to be usable in reloader big hands... ;) Print instructions Category: Tools Print Settings Printer Brand: Prusa Printer:…
If you are, just like me, tired of going through the box of shell holders, looking for the needed number, this is the solution for you! Everything you need in one place, with numbers large enough that you can read them without glasses :-)…
I'm putting together some small batches of loads for testing, so I decided to come up with a few tools to help. I didn't need large 50 or 100 round trays (nor did I want to buy/wait for them), so I decided to draw up my own custom ones.…
.308 Winchester/7.62 mm X 51 mm labelled loading block is sized for rifle cases with a rim diameter of .473" (12 mm.) This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
This powder pan was designed to work with an AMIR/Brifit digital scale from Amazon. (Linked below) However, there are many other brands of scales that look identical or use the same platten. The bottom measures 33mm in diameter and is…
UPDATES: 18/06/2024 Made the Rear.stl walls slightly thiccer by 0.75mm. Spring guide in the Mag Base.stl is now taller, this will prevent the mag spring from tangling and prevent the follower from going further down than it needs to,…
update october 2023: I added new optimized version V2. This works a little bit better for me. Feedback are welcome. I recently got my MMU3. Unfortunately, threading the filament into the buffer is very difficult if you have to hold…
This is a shotgun shell tray for reloading. The shotgun shells are placed bottom down in the tray. The design ist made so the the shells can't fall off the tray while moving it around. Happy printing Print Settings Printer Brand: Prusa…
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
Simple 8mm film reel. I modeled it after the autoloading reel that came with my projector. I cannot guarantee compatibility with other models of projectors, but I attached an editable .step file so the model can be easily remixed. The…
Side mount for improved and easier loading on the Qidi X-Max 3. Compatible with the dry box. The box is rotated 45 degrees but the stays desiccant bag stays in place just fine. The bracket fits snug into the side handle. I printed this…
Updated in 2025. I received a request for a modified version of the powder cup. 20mm tall, dual spouts and no notch. There is a revised version of this cup because after I got around to printing it, I found the overhangs didn't print…
Ripped straight from the fallout 4 game files. 32k triangles 98k vertices
you will need to shorten ptfe from extruder to hubs by 9mm this prevents the jamming of lane 4 by adding length to allow internal geometry to better direct the filament and keep it from hitting the wall where the bearing for the filament…
Note: these build instructions are preliminary - I'll try to update them with more detail when I have time, but I wanted to get these out there. BACKGROUND: 5 m telescopic whip antennas have become readily available and very popular…
I loved the design of jcolega's Sideways Divider , but I tend to use makeshift shoe boxes and BCW shoe box storage to orient my cards vertically. I used the influence of his design to make one from the ground up. I also loved the idea of…
Yellow Front Loading Garbage Truck (Basic) - Fully Functional 3D Model(1:21 scale) Garbage trucks are marvels of engineering, seamlessly combining power and precision to manage an essential task in modern society. The front-loading…
Needed a build plate holder that can be loaded from the side so I can put it on a shelf that has another shelf above it. Holds 5 regular thickness Bambu labs X1/X1C/P1P plates. STEP file included.
ramps fit really good without removing the platform gate and are proven working by my 4year old nephew :-) print twice (mirror one to get both, left and right ramp) originally designed in Catia V5. Unfortunately CATPart files are not…
As long as your printer is capable of 1" bridging, you should be able to print this without supports.
not perfect but they hold the shells for hand reloading. i put supports on for the eased edges. takes about 2 hrs to print.
I have an old Herter's reloading tray that I prefer over many of the current commercial product designs . This design is an homage to that Herter's tray which held 60 cases, this design holds 50. Opening is 0.55", in the picture you can…
Anthony Kochevar is in my eyes one of the best designers at Thingiverse, at least within the ones who creates models for model railways. If you are interested in northern American railway themes, I strongly recommend to visit his site:…
Lee Breechlock reloading die stands. 3 hole, mainly for rifle calibers, includes space for shellholder. May also work with Hornady Lock-N-Load. Printed in PLA on Bambulab X1C
Self-Loading Lego Dice Tower Inland Filament Used: Silver PLA Printer Settings: Print Time: 20h 22m Needed: 8 M3x12 and 1 M3x20 screws No Supports All parts should be loose, screws should be finger-tight STL designed by dsk001_3d
This mount allows you to mount an Akro Mills Bin to the front bar of the Hornady LNL AP press. Stock Hornady bins are the 30210 models. Bin Mount Sizes Single Double (about 75% support of each bin) Double Longer (100% support of each bin)…
9mm Reloading tray. Holds Qty 50 brass per tray. Print however you desire.
This is a upgrade for the case slider on the Lee 6000 (Six Pack) Progressive Reloading Press. It improved the reliability of grabbing a case and inserting it into the shell holder and prevents/greatly reduces kinking the case feed spring.…
This is a Remixed "9X19mm Stacking Loading Block" by @brass_ring to add a tray. This remix was created at the request of a friend who reloads his own 9mm cartridges.
Simple stand for holding 9mm Luger rounds during manual reload. Easily modifiable. Print instructions Easy to print, PLA material is suitable as well. In such case, generate new gcode.
I know, another reloading tray? Well after being disappointed with other options for various reasons, I decided to create my own. Others were either too big, non-stacking, or didn't have enough caliber options. These are stackable and…
From when i sold 3d prints on request.
To prevent spent primers jumping all over the place, you can insert these fillers into the slot of the ram of your RCBS press. Both have the same function, the T-shaped one comes out with the shell holder, the other one can stay in the…
This is a .308 version of my previous 6.5-.284 tray. It should print with no supports, but if your printer has trouble with bridging you can use supports for the handles.
Added a little handle for easier loading
Easy print - no supports needed. Gcode prints two as in the picture. I printed it at .15 you you could easily do it at .3. A little bit of CA glue to assemble.
Help to load the magazin and rear sight adjust screwdriver Dedicated to Pardini SP .22 sport pistols
This is 9X19mm stacking loading block. This is a work in progress, so check for updates before printing. Revision History: 05/12/2023 - Text vertical adjusted. Category: Tool Holders & Boxes
I really love the entire Gridfinity system by ZackFreedman and I've been dying to try these organizers with the built in windows. When I finally did, the OG design didn't work for me. I didn't want to use double stick tape. The glass…
This attachment adds a spool buffer mounting port to the top of the Cassette Buffer. This attachment is made by modifying the official segmenter-R3.stl file. The usual rear attachment port is retained, so you can use either the top or the…
BACKGROUND: The Elecraft KH1 blew up the portable HF radio operating scene when it was released. It covers 5 bands from 40 - 15 m and has an internal ATU and battery. It's actually designed for hand-held use. But with the standard whip…
Reloading Trays / Blocks which are efficient! There are some great reloading trays out there. I don't think my design is particularly better in most ways, but they're pretty good at using only a little bit of filament in comparison. These…
After trying out lostprimers diy reloading press, i tweaked it to make it fit metric hardware and to improve sturdiness. i think i have achieved this by adding a M12 rod which clamps the parts in their postion to prevent unwanted…
Overview: Easily restock cans without needing keep a very large stock of cans that a lot of the other dispensers expect. Side-loading for First In-First Out and to make it easier instead of needing to load from the back (which isn't…
FPS Optimized Rear Loading Shell ---> for Short Dart + Elite Dart for the X-Shot Excel Ejector Shell Blaster Load short darts into the shell without ramrod due to rear loading. Easy loading of the shells due to the optional loading tray…
Very simple and quick insert that can be stored inside standard ammo then reversed to raise every second row for easy access to single rnds. After 25 rnds you can rotate the grate 180 and raise the other rows. I find it suites Bench…
SFA Shell Caddy for loading Doubles in competitive shotgun shooting. Update 12292023 - Added the end stop stl file… This utilizes a single back plate design and alignment tabs on the clips for easy setup and adjustability. 12 mounting…
Case neck and bullet concentricity gauge for reloading (supports for 308 and 223). Kind of based on one of the $300+ aluminum ones I've seen. Uses pretty much any dial micrometer, I used a $25 Wen off Amazon, seems to do well. Hardware is…
A wall mount to hold reloading dies with the shell holder. Available for screw in or Multiboard. The screw-in style uses M4 screws. The Multiboard style uses Dual Snap Connector - Part B. It will hold the die weight on the Mutlboard as is…
Simple stand for holding .308Win rounds during manual reload. Easily modifiable. Print instructions Infill 15% for 20 rounds, 5% for 50 rounds model.
Remix of @ken226 's reloading trays. I added letters and numbers for use in load development. These are perfect to keep track of changing loads while looking for the perfect load for your individual 45-70 government.
Shellholder holder for reloading. Holds 5, 7, or 9 shellholders and screws to a wall or bench. I have included the Blender file. Category: Tool Holders & Boxes
Redesign of the die box that comes with all Lee loading dies so that you can leave the Hornady LNL bushings on the dies in storage (original Lee box was too small and lid would not snap shut). Should be good for all caliber dies as their…
[M10 Manpack] Ultra Portable Antenna Kit vertical HF antenna with optional loading coil i needed to create a super compact antenna kit utilizing all M10 threads. it enable the user to use the very cheap telescopic whip, loading coil and…
This remix adds the washers for wheel centering to the hexagon version of the RMU Inspired Filament Buffer.
Please note that this model is outdated and is no longer recommended. It will be kept here for reference. You can download the latest version here
Shotgun shotshell reloading trays for 16 gauge, 20 gauge, 28 gauge, and 410 bore. I couldn't find any small bore reloading trays out there so I made some for my reloading hobby. These are useful for reloading to keep the hulls stable and…
Compact and Stackable reloading plates all same size for all of them. Making then fit needly when they are not in use.
This is ..38 Special and .357 Magnum stacking loading block. Category: Tool Holders & Boxes
300 Blackout Reloading Block / Tray. Use supports for the end handles. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Prusament PLA Grey Notes: Any material does the…
Picture Frame for Trading Cards in Ultra Pro Top Loading Sleeves The slot is just the right size. Slides in just right. Very satisfying. Fits the 3x4 basic sleeves. The tall Sleeves are a bit to wide for this frame. Plus those longer ones…
These were sized using Safariland Comp III speed loaders for K frame and L frame revolvers. Also works for Ruger GP100, which is the same geometry as an S&W L frame. Printed in Elegoo PLA. 15% infil, adaptive cubic, three perimeters. Not…
This is a round counter for Dillon 650/750 Reloading press, it could be used to count other metallic items I suppose. Remixed from a round counter for Dillon 1050 reloading press found on the internet a couple of years ago. The counter…
The is a prototype of a wrench used to tighten/loosen the nut on reloading dies. Fits a 1-1/8" nut. This was designed for Lee reloading presses which have a very tight area to fit the wrench. Now that the prototype works/fits I will…
Created by Designmond @des_3526156137
Reloading tray for .357 Magnum and .38 Special. Fits also for smaller caliber.
EDIT 07/20/2025: Added a Chamfer to the holes in the block (Because chamfers are what separate us from the animals) Reloading Block for .223 Rem./5.56x45 NATO rounds. The Block holds 50 shell casings at 0.5" (12.7mm) deep. The holes are…
This is a helpful accessoire when you want to deprime only on your Lee Precision Turret Press. After inserting this piece into the slot, the used primer will be redirected to the back hole. The piece clicks onto the rod and fits snugly…
