Liczymy pasujące modele…
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
Resin vat drainer for anycubic photon mono Summary Resin vat drainer Print Settings Printer: Voron 2.4 Rafts: No Supports: No Filament brand: PolyMaker Filament color: Black Filament material: PETG Notes: Resin vat drainer
I couldn't find many cases for the M5StickC PLUS2 that I liked, so I made my own. This is a simple case which will protect the device and allow you to carry it with a lanyard or a key chain. The M5StickC PLUS2 is just press fit into the…
I wanted something to protect my Cardputer when I carry it in my jacket pocket. Buttons, power switch and SD card are all accessible on the back without removing the device from the case bottom as well as the USB-C port on the right (the…
There are a few vat drain stands but non of them are like I wanted to have one. For this drain stand you need a 20x10 aluminium profile or a standard 20x20 with M5 nuts for this profile. For the M5s and M3 vat holder, a M5x40 screw is…
A lid for the vat of Anycubic Photon Mono M5s with a handle, suitable for smaller printers (printed on my X1C in PETG). The print is in 4 parts - left, right, handle, and center connection.
DRIP BRACKET FOR PRINT PLATFORM. ALIGNED TO THE WHOLE VAT
Printing Recommendations: Use adaptive layer heights (up to 0.2mm max) for optimal surface quality and faster print times. Tree supports recommended for clean and easy support removal. Components: Heltec LoRa32 V3 NEO-6M GPS Module…
Created a spacer so I could add GPIO headers and a bit more space for larger battery. Short M2 screws needed to hold the spacer on. Make sure there is enough clearance as the front cover screws use the same thread. You can probably…
You can keep the whole logo blue/black or choose to color it with the original colors like i did (in your slicer). I printed mine in PLA/High speed PLA using 3 walls, 3 top/bottom layers, 15% gyroid infill and 0.2mm layer height on a…
When assembled with a magnetic flex plate it is the same height as the factory build plate. Version 2 includes the bottom and top part of the build plate as a complete replacement to the original. Version 1 is just the bottom part of the…
Подвес платформы для Anycubic Photon Mono M5S
Here's a quick model for anyone looking to design their own keyboard case for the CardKB
ACCESORIO PARA ESCURRIR LA RESINA SOBRANTE DE LA IMPRESION. DISEÑADO PARA LA SERIE PHOTOM MONO M5S Y M5S PRO PARÁMETROS DE IMPRESIÓN 3D PLA / PETG BOQUILLA 0.4 ALTURA DE CAPA 0.2 RELLENO PANAL DE ABEJA AL 15% SOPORTE EN LAS ZONAS DE…
09.02.2026 Update: add new Front part with new necenano support, which uses low-profile USB-C connector. 18.02.2024 Update: add Base.stl file and upgraded step file In relation to the original model: - the profile of the adjoining surface…
The M5Stack Cardputer Modular Expander is an extension board designed to enhance the capabilities of the M5Stack Cardputer. This expander provides you oportunity to add add additional modules: WIFI external antenna, CC1101, IR Transmitter…
M5Stack Cardputer is interesting piece of hardware. It's quite hard to use when flat on the desk. This angled stand will raise it by 15°. Stick rubber feet to bottom to stop it for sliding. The stand slots into LEGO-compatible holes on…
Recommended to print at 5% infill with additional wall support. No supports needed and no screws or other fixings. Clean up the posts and check they are not too tight before placing the Cardputer on too firmly, it should lift off with…
M5Stack is set of electronics development modules. Some of them have cute magnetic stand, but most does not. This one isn't magnetic, but is parametric, so you can change its height, angle... Use M3 screws for attaching the unit to the…
A replacement bezel for the M5Stack Dial - print in any colour to fit in with the rest of your build. I didn't like the orange and grey scheme, so measured up the parts and designed simplified replacements.
A simple remix of hippazoid case but for the Cardputer ADV version and the M5Stack logo. I kept the original parameters for the print: 2 walls, 3 top/bottom layers, 15% gyroid infill and 0.2mm layer height.
V5 whit complet acces to the USB PORT
Reference model for making cases and such, keep in mind that I measured the physical device with calipers, so it's not perfectly accurate, but that's what you get when a DIY company doesn't release any real specs.
this is a wrist band for M5Stick-c micro module esp8266 compatible. version v2 is more confortable. i used 2 stainless stell spring bar for watch and simple velcro band Print Settings Printer: Prusa i3 homemade Rafts: No Supports: Yes…
Stand for the M5Stack Cardputer-ADV. The pegs are not a friction fit, just for locating. There are pockets for 5x3mm magnets to hold the Cardputer to the stand. Designed to work well with the Cap LoRa-1262 module attached
Hello, This case allows you to attach and protect the M5StickC and M5StickC-Plus to any stand. There are two attachment options; screw-on or elastic. The screw-on option is ideal for any flat surface. The elastic option is ideal for…
These mounts are designed to work with M5Stack modules and the cameras. They are very simple in design but work very well. I haven't tested the camera tripod mount yet, this one needs a square nut inserted for use on a tripod. I designed…
The M5Stack Cardputer pins extender, gives to opportunity to use 8 extended pins [ 5V, GND, G1, G2, CLK, DAT0, CMD, 3.3V ]. Throw this pins you can easily attached CC1101 , NRF and more other modules. For assembling process and additional…
Print 4 out of TPU and push them in to the existing feet.
Hi everyone! This is my first upload and my first true 3D model edit. This is a protective pelican style case that holds two M5Stack core units. It will hold Core, Core 2, and CoreS3, as well as modules like the Battery 13.2, PM2.5, etc.…
This is a NRF24L01 case to use it with the M5Stack Plus 2. I did the case but the unit i bought sadly does not work propertly.
Mounting plates/covers for M5Stack Atom Lite ESP32 IoT Development Boards. I use these awesome little and cheap boards for measuring water levels in my tanks, light control, remote buttons and more! I couldn't find any covers. cases or…
Remix of Flashhawks design however this one allows you to fit the case over the printer while it drip
A simple Pomodoro Timer using M5Stack Dial .
M5Stack Cardputer Front Protector
This is a prototype for a 40mm high riser for the Any Cubic Photon Mono M5s with built in ventilation. This is a work in progress. Included is an optional adapter to fit 100mm laundry ducting. The parts need to be superglued together.
This model is a 3D‑printed rear enclosure (back box) for the M5Stack Tab5, featuring an integrated storage compartment with a sliding lid . The M5Stack Tab5 is shipped without a rear cover , leaving the battery protruding and exposed.…
This is a CC1101 case to use it with the M5Stack Plus 2.
Back plate for M5Stack Cardputer enabling easy modifications (via provided .f3d file) , or change with origial one. Remix it as you like. You maybe will need to increase tolerances becouse I tried to make all holes as tight as possible.…
Warning: In asembly you will NEED hot glue gun for glueing battery module to the plastic frame-thing also be aware and do not overtight screws otherwise screw holes will break off. Antena mod for cardputer providing extended wifi and…
Recommended to print at 5% infill with additional wall support. No supports needed and no screws or other fixings. Clean up the posts and check they are not too tight before placing the Cardputer on too firmly, it should lift off with…
This is a cold shoe mount for an M5StickC or M5StickCPLUS. This can be used with any camera shoe mount. Theres 2 version, one with the cold shoe screw on the bottom for it to face out, as well as a cold shoe screw on the back to face up.…
UPDATE: 9/4/23 PLEASE READ BEFORE PRINTING I have confirmed the design and it functions perfectly as expected. Verified files: Anycubic M5S-Plug V3; Anycubic M5S-STD V3; Anycubic M5S OEM V3 The XTR file is still pending since I do not…
UPDATE: After several months using this, it works fine, but I had to retighten the screws I used once, just make sure your screws are well tightened and it should be fine. Build Plate Adaptor for Magnetic Plate for ANYCUBIC Photon Mono…
Used with Photon Mono M5s Pro resin printer, holds platform at an angle, making the unused resin drip back to the tank. The model was printed with a filament printer, and is on it's side to enhance longevity for prolonged use and this…
A stand for your M5StickC Plus.
This is a simple little casemount for the M5Stack ATOM ECHO.
I made a CC1101 for my Cardputer ADV following Ray J's tutorial on YouTube and decided to design a case for it. Here's the tutorial on how to make the CC1101: Can be printed without supports. I believe the spacers I printed for the device…
I printed the parts from Resin Vat Drain Stand for Anycubic Resin Printer M3 & M5s von CL Performance | Kostenloses STL-Modell herunterladen | Printables.com , but there was not the vat holder for M5s. So I designed a new vat holder . All…
Revision history: V1: Initial release The case is for this camera: https://docs.m5stack.com/en/unit/timercam_x Photos show it next to the original. The case has a hole for a m5 nut so that it can be fixed to something.
Adapter plate for Mono M5s Pro build plate, for Wash & Cure 3 Plus washers.
3D model of the M5Stack CoreS3 loT Development Kit, probably not 100% acurate but is sufficient enough for most things
Simple holder for a M5StickC Plus (I am not 100% sure it is compatible with the M5StickC). I use this to display my daughter's Nightscout glucose values while on long car trips. Of course it can be use for any automotive use of the…
An easy way to mount your m5stack core basic to flat surfaces. You will need 4 M3 threaded inserts . I used the inserts from CNC Kitchen , you can allso buy these from many resellers . I designed 2 versions , a thinn one with wall…
A desk stand for the M5Stack Dial, angled for easy viewing and tapping while you're typing. Features: - Angled mounting bay holds the Dial at a comfortable viewing/interaction angle - USB-C cable cutout in the back for power without…
Mounting frame for installing the M5dial into a standard 57mm avionics hole.
This model expects 6x M3x8 machine head screws. I printed with 85A tpu, anything rated with an A is probably fine. This cases' back is flush with a NP-F550, but will take the larger sizes.…
A storage case for the Cardputer ADV with the LoRa Cap (with the included stock antenna). External case can be printed using your choice of material-PLA, PETG, ABS, etc. The inserts should ideally be printed in TPU for shock absorption…
M5Stack Card Computer (Cardputer) Mount compatible with Ikea Skadis Pegboards. Designed in FreeCAD. “split” 3mf file splits model into two pieces if a higher infill percentage is prefered for the back. Otherwise use the STL.
ummary I remixed the very nice M5Stack Wall Mount by Aoshimak. I added a cutout to allow the unit to stay connected to the USB-C port. I also covered over the screw holes and used basic mounting tape instead. Covering over the screw holes…
A case for the M5Stack Atom Thermal Printer . I love the cardboard case that's supplied with the Atom thermal printer but mine started to tear after a few weeks so I decided to design something that could hold the printer and 2 rolls of…
M5stack atomS3 and S3R enclosure. if you want less tight add 0,1 or 0,2 mm in size.
You just need 2x M6 25mm bolts 3x M6 Nuts(2 of them selflocking is optional) 1x washer Print it with the holes flat on the buildplate with at least 4 perimeters, i used 6 on a 0.6mm nozzle! Category: 3D Printer Accessories
camera 5M is small PoE Camer what could serve for any purpose, I need simple holder for “ Articulated Arm ” . Enjoy :)
I am making another model that uses the ESP32 Basic Core IoT Development Kit 2.7 from M5Stack and didn't find a mount I could remix, so I thought I would make one that everyone else can. This mount has holes in the right place for the M3…
Casing for electronics: m5stack Atom Lite Battery Pack RFID module (or RFID2, they are the same size physically) Uses m3 heat inserts to keep the top and bottom secure. Lid is recommended to be printed upside-down (such that your heatbed…
M5Stack AtomS3 Halter für eine 3,5 Senkkopfschraube ---- M5Stack AtomS3 holder for a 3.5 countersunk screw
Designed for: Amazon.com: DeWalt DWST14830 - Organizador profesional de 20 compartimentos con divisor extraíble, amarillo/negro : Herramientas y Mejoras del Hogar
Print tips: Lay the faces of the surfaces flat on the build plate. If you have a well dialed in printer you will not need to use supports. If you don't, use tree supports. Please see the readmes in the original. You may want to increase…
Modelo criado de forma independente para usuários do equipamento, sem fins lucrativos e sem qualquer vínculo, afiliação ou aprovação da fabricante. Todas as marcas pertencem aos seus respectivos proprietários. ( Material PETG 240 graus…
CAD of the M5Stack ASR6501 LoRaWAN module, with antenna. Useful if you want to design IoT modules and just import external components. I haven't modeled the interior. .F3D, .STEP and .3MF included. .STEP and .3MF without antenna. .STEP…
Tilted Build Plate Support for the Anycubic Photon Mono M5s Pro, remixed from an existing model and adapted to our own use. The design reflects practical adjustments made through hands-on testing in the studio. We opted to print it in…
MLX90640 thermal camera cover for M5Stack locator for solder MLX90640 on pcb. Print Settings Printer Brand: Deltaprintr Printer: Deltaprintr Assembled Rafts: No Supports: No Resolution: 0.15 Infill: 33.3% How I Designed This Try Thermal…
A bipedal robot built with M5Stack and SG90. PCB gerver and sample code is uploaded to my Github. https://github.com/tomorrow56/M5Stack_Walk-chan/tree/main Product description(note.com) https://note.com/tomorrow56/n/nf83f81b76e1e
M5Stamp cover to fit in place of factory one if external antena mod is installed. Needs special cable routing (or change in model) to work properly (see photos) Print settings: 0.2mm layer height no supports
I designed this magnetic mount to bolt to the Rubigrid inside my truck. It prints in 3 pieces. First, the AMPS mount base, which can be installed on an appropriately sized Rubigrid or mounted to a dash with VHB tape. (If mounting to a…
Box for Stamp Fly, Atom Joystick and short USB-C cable. Stamp Fly and Atom Joystick link: https://shop.m5stack.com/products/m5stamp-fly-with-m5stamps3 https://shop.m5stack.com/products/atom-joystick-with-m5atoms3 Printed with Bambu X1C in…
Gridfinity dashboard module for 8.8" 1920x480 ultra-wide touch screen and 3 M5Stack dials I used this display: https://nl.aliexpress.com/item/1005003014364673.html (with touch) Requires interface plates and magnets to connect to a…
I liked the idea of the spacer that another designer had made as I was struggling to make an adequate and secure venting enclosure. I thought I'd take some time to make a similar but different approach to using duct pipes with magnets.…
Slim enclosure for Heltec Wireless Tracker & M5Stack CardKB with Battery An enclosure that fits in Heltec Wireless Tracker, M5Stack CardKB Keyboard, a battery (up to 38mm x 70mm x 5mm), and a cutout hole for the LoRa antennae. Mainly…
This stand will allow you to neatly mount your M5stick on your IKEA Skais board.
This is to magnetically mount the M5Stack NanoC6 . It is designed for 6mm x 2mm magnets . I include STEP and Fusion 360 files for easy remixing. Features: Nice friction fit; arms are slightly tapered so they flex a little and maintain…
A magnetic case for the M5Stack StopWatch ( Store , AliExpress ) for a better Grip. Uses 4 6×3mm round magnets for holding the device. Has a passthrough for straps and cable, protects the power button from getting accidentally pressed.
Simple wall mounting bracket to hold the ATOM Matrix with clearance for HY2.0-4P connector. My use case didn't require access to the pin sockets on the back so I left them blocked off. Sized for a #8 screw but it's a fairly close fit…
This model is a modified (Remixed) version of an original work I found on Thingiverse made by daffniles. The modifications were made to be able to house the M5Stack GPS unit and to return the Groves cable back into the unit so it would…
Gridfinity dashboard module for two M5Stack dials Requires interface plates and magnets to connect to a Gridfinity base plate . Print bracket on the side. No support material needed. You need angled usb-c cables (or just connect power…
This stand features a compact footprint with integrated 16 mm mounting studs, providing secure attachment for M5Stack 16 mm modules, including the Atom Lite. The base is designed for both tabletop and desktop use, offering stability while…
Case for people who want to use a keyboard with their T114. This requires you to have small battery terminals to insert into the battery housing area, wires to solder onto the terminals, and the 1.25 molex pico blade connector to connect…
Just a test of some new skills. multimaterial and magnet insertion using the logo of a favorite microcontroller company. Pause to insert magnet at 3.4mm. Color change to blue at 5.2mm and then to black at 5.8mm. Started with glow in the…
While printing a larger model with a Anycubic Photon Mono M5s Pro, I was unsure if the resin in the vat is sufficient for the model. I did not find any good model for easy and useful measurement of the current filling volume. So I did…
WIP - still needs fine tuning and a cover adding.
Info This Adapter is made for the new m5Stack Unit CamS3. It fits any ov2640 module with a 120* viewing angle lens on it. Just pop open the original housing, and change the module as well as the adapter! Like what you see? Consider…
See-thru design is simple, keyboard text show thru, yet provides protection. Print using clear TPU on smooth build plate. Heat stake bottom edges with soldering iron set at 220C or lowest setting possible.
I always have the problem that the prints don't stick to the original printing plate. With my additional printing plate I made it possible for the resin prints to adhere better to the plate. Of course, it is then even more difficult to…
AMF Grader - Open Source M5Stack Weight Sorter for Fruits and Vegitables. Summary AMF (Aizu Matsubara Farm) Grader is an open-source fruit sorting machine designed specifically for persimmons but adaptable for any fruits,vegitables and so…
After I printed original stack I found the same issue as some other reviewers - some USB cables do not bent so well so the stand does not stand. I had some iterations on the extender with screw / spring versions, but found all of them…
M5Stack Paper Color e-paper Display (SKU: C151) Stand, with integrated USB C cable management. A portrait version stand is also available . Designed to integrate with the display's built-in clip indentations. The display is angled for…
Mettre une pause a 6,6mm afin d'ajouter les rondelles pour faire contre poids Ne surtout pas mettre de support J'ai utilisé deux rondelles diametre 26,5 épaisseur 2mm
Add a pause during the print at 9mm to add washer to give more weight and stability In the holes at the upper add no head screw (M5x15) to have more grip
