Liczymy pasujące modele…
Printed in 2 parts (left and right side). I used PETG, use whatever filament you want. Parts are oriented for printing, I printed it with 0.3mm nozzle (because I'm insane), you can use whatever you want, preferably 0.4 or 0.6mm. Use a…
Brackets I used to mount a UMC22 underneath my desk. Should also fit a UM2, but I don't have one to test with. Takes just over 1.5hrs to print each bracket on my Cetus. Mounting holes are sized for #6 flat countersunk screws. You can also…
Mount for the Behringer UMC202HD USB audio interface (maybe works for other models, too). The front plates are hold in place by M4 melting inset nuts. Printed in Devil Design PETG on a Prusa Mini clone.
Friend of mine liked the design from Thingiverse but wanted a place for the wires to sit. The gap for the wire holder is the same on both sides only because I didn't feel like having a “correct” way to mount it. I included the f3d file if…
Modeled in Fusion 360 Printed in PLA .2mm layer height
I got myself a great bundle deal including two E61 machines, some other bits and this grinder. I do not plan on keeping it but I really like to restore and modify coffee related machines, so there we go, full single dose conversion. The…
This holds your collet wrenches in one place. I put mine on the right side of the machine with the probes (see also my probe holders) There are bumps on the top to prevent them from vibrating off and indents on the side to make it easier…
A functional record player turntable made from 3D printed and 3D printer parts, With proper AT3600L needle and adjuestable tracking weight. Testing of my 3D printed turntable (V1-V3): https://youtu.be/MylsAJhz4OQ Features: No need for…
Ah, the tangled web of the audio interface! We've all been there, wrestling with cables like some sort of octopus in a tech-induced wrestling match. It's a constant battle between a clean workspace and the siren call of sweet, sweet…
Hello, Here is small and easy project of Behringer U-Phoria UMC202HD mount. You can put your Audio IF under your table and… stable. In my case printed with PLA.
Here are two separate holders, one for the Z height puck and the other for the X-Y probe. Use good quality double sided tape to mount them and then they hold your probes out of the way. Printing: I printed them as oriented without…
I needed a panel for my 10" rack, I decided to combine my USG and MC220L. They fit perfectly, but you can add zip tie or double tape for more security. It's a long print, almost 10 hours ! Print instructions Print in PETG or PLA.
The initial goal was to make this machine a lot more quite so I put some damping foam beneath it and filled the empty top piece with an elastic silicone. Its still loud but not as much and the sound is deeper so nicer to the ears. After…
Print "Part1.stl" twice Every other STL once. i connected everything by pressfitting and gluing. My printing settings: .2mm resolution no supports 15% Gyroid infill Printer: Ender-3 V3 KE
This includes an adapter for the machine's drain at the back so you can connect the hose straight down, no bends. You will need five M3 bolts and nuts and drill into the aluminum drain part your kit came with to attach it. You may want to…
This is the “GR2” rubber grommet that along with a metal bushing and a screw, keeps the PGM-III unit in place. A suitable material for the application is TPU (thermoplastic polyurethane), a flexible filament with excellent…
These add a finishing touch to your DMC2 CNC machine by capping off the open tubes of the two vertical pillars and the two horizontal tubes for the X axis. You can buy caps, but since you have a 3d Printer, why not print them. You can…
Quick and dirty mount to fit a Omron TL-Q5MC2 probe (or similar square clone like Vorons use) onto the BL-Touch mount point on a CR10-V2. Requires you to have a spring steel flex plate to work well but more reliable than the BL-Touch.…
The “notched” version allows routing cables below the device, otherwise they need to go around the sides. Use a skirt to keep the (at first) separated pieces in place while printing. The version “with USB stick holder” has three slots for…
This replaces the two mountable zip ties for mounting the spindle, stepper, coolant hose and sensor wires to the upright. Keeps it a bit more stable. Uses the original M4 bolts. You need a single zip tie as well. Printing: Print in…
Vertical DIN-rail mount for MKS TMC2160-0C external stepper drivers. Use PCB DIN clip to atach it to the rail. I taped an M3 thread in the holes but you can also directly screw into it. Link for PCB DIN CLIP from VORON github page.
Because the smaller UMC devices from Behringer don't have the four screws at the sides, all of the already available stand wont work for them. Therefore I designed this simple wedge to make it a bit more easy to use because you can reach…
Use sensorless homing in your own projects! In this project and associate video I’ll show you how to set up sensorless homing using a TMC2209 stepper driver — no mechanical limit switches required! Perfect for 3D printers, CNC machines,…
The way the flood nozzle is mounted is too flexible, it is hard to adjust the nozzle with one hand and have it stay where you put it. This is a solid mount. Update : I added two more versions, a medium and long. They move the nozzle up…
This is a holder for the oilier on the DMC2 CNC machine, it is much more stable than the original method. It uses the original bolts and 2 regular zip ties. The slot at the top keeps it from turning or moving up and down. Printing: Print…
3D printed Pendant Mount for Shariff DMC2 5-Axis Jogwheel, This screws into my work table but I can modify the file so it can be directly attached to the CNC. I will add more photos later.
This model includes a magnetic holder that fits in the probe mount on your DMC and is held in with magnets. There are two different styles of dial gauge mounts, one for a regular dial gauge and the other one for a gauge with dovetail. The…
This is my design for the CBR250rr MC19 MC22 mirror blanking plates that i made for my track mc22. I set the infill to 40% to add extra strength when tightening the nut and bolt so it didn't tear through or crush the print.
Requires for assembly: 8 x DIN 912 m3x20 8 x DIN 562 M3 Screw usage is up to your discretion.
Fan duct and matching fan grille for mounting a fan directly above a MKS GEN_L board. When used with a thin fan (8010), the design fits right inside the JGAurora A5 with enough headroom for the Y-axis gantry to pass over. Required parts:…
A bracket for a Behringer UMC202HD audio interface
Variation on the excellent model by Michel. This is a remix of the “large” model with a slot to allow for better initial placement of the nozzle. I also thickened the walls as I was worried about the nozzle hitting the work and breaking…
Alternative coolant "trough" for the Shariff DMC Mini CNC mill. Uses original screws.
BEHRINGER UMC204HD external sound card vertical support. No support needed.
Mossberg MC2C/MC2SC 9mm, Pistol Magazine Speed Loader
This adapter bolts on to the end of the coolant tray on the rear of the DMC2 to adapt to a 1.25 inch drain tube. a much nicer and cleaner connection than the big clear hose supplied in the kit. I used 1.25 inch marine bilge pump hose. You…
E=mc2 . It's the world's most famous equation. Now you can display this equation too. Put it on your desk, stick magnets on the back and display it on your fridge or whiteboard, or print a bunch to share. There are two different files. In…
This is a wire holder/guide for the Shariff DMC2 CNC. It is used to separate and hold the spindle cable of wires on one side of the coolant line and keep the stepper motor wires and encoder cables on the other. This is a nice alternative…
Print, put on potentiometer, turn
I wanted a basic mount for my drivers from Adafruit to keep them from shorting on random stuff on my desk. There wasn't one online. I made one. STEP file attached if you want to tweak it. Not affiliated with Adafruit. Basic mounts for the…
Compact setup for single 1U tray with both switch and media converter.
Ich habe mir einen passenden Verstärker gebaut um passive Lautsprecher über die Monitor-Ausgänge meines Behringer UMC202HD betreiben zu können. Das Gehäuse kann man natürlich auch für andere Sachen nutzen. Dafür habe ich einen sehr…
Print this in TPU and use a hose clamp to attach to the DMC2 spindle. It will greatly reduce coolant splash/spray.
4/26/2020 Update: Shrunk download significantly by removing my build libraries, that was dumb, you need to build it anyway. Also tuned down mA on TMC2209's to 790 to eliminate layer shifting issues I was having. Ignore the calibration…
I’ve created an original and humorous coaster for any hot drink—though it’s primarily designed for coffee. I hope you like it and find it amusing. I’d appreciate any feedback.
Remixed single dose funnel for the Iberital Challenge MC2
Nachdem der Eggbot nun läuft, musste ich feststellen, das der "Druck" ziemlich zittrig ist. Erste Vermutung war, das die Mechanik "schwingt". Bei näherer Untersuchung kamen nun die Motortreiber in betracht. Also Lösung gesucht und…
Mr. Puff for the Kafatek Monolith MC2. Print in TPU (Flex) Print Settings Rafts: No Supports: No Filament: TPU TPU Category: Kitchen & Dining
Just a simple vertical DIN rail mounting system for the MKS TMC2160-OC Driver boards using M3 Heat-set inserts. Designed for this tensioned DIN Rail mount with M3 Heat-set inserts.
Antenna socket for the Multiplex mc2020 / mc2010 R/C transmitter, to replace the original "telescopic" antenna socket. Just snap into the transmitter housing instead of the original one. A standard 2.4GHz antenna sockets fit well into…
A keychain with a joke about the theory of relativity, with milk and coffee for all the coffee lovers and nerds. To make the 2 colors just stop the print and change the fillament hope you like it
Replaces a broken post on a LG Countertop Microwave LMC2075ST. The knob post can get broken if someone pushes on the button on the wrong side, or if the knob is impacted from the side. If you break a post the knob will be diagonal when…
És un remix de la tolva amb anti pop corn
Just a simple vertical DIN rail mounting system for the MKS TMC2160-OC Driver boards using M3 Heat-set inserts. Designed for this tensioned DIN Rail mount with M3 Heat-set inserts.
This is a stand for the UMC22, it includes cablechannels for headphones and a XLR Microphone - not tested
After printing I drilled the holes out for ease of inserting m3 screws to clamp the model together. photos are before adding the additional screw mounts, it was fine with 3 but more is better? I used m3x6 but can get by with longer as the…
The gimbals of the old Multiplex Profi mc transmitter series are a good basis of a DIY or retrofit transmitter project. Unfortunately they use 5kOhm sliding potentiometer as trim inputs which no modern transmitter mainboard (e.g. Turnigy…
This jig is designed for the perfectionist. Specifically tailored for BigTreeTech TMC2209 modules , this tool allows you to align and seat four heatsinks simultaneously with surgical precision. Whether you are fully populating a Manta M8P…
Inspired by others seen on Printables, but decided to go ahead and design my own. Printed with Flashforge Ad5mPro PLA 10% infill, its pretty solid for what it is. First fully self design.
For use with fan 4020 and TMC2209 Print Settings Rafts: No Supports: No Resolution: 0.16 Infill: 25 Filament: Bembird ABS Black Category: 3D Printer Parts
The bracket is designed to hold USB sound interface Behringer U-Phoria UMC202HD and a power amp Fosi Audio BT20A Pro. The devices slide in the bracket.
A McIntosh MC250 shaped keychain, about 5000 times lighter than the original amplifier. No supports needed, print the black parts (transformer, transistors cage and autoformers) in black, the “chrome” base part in shiny grey and glue them.
Summary I needed another way to mount the TP-Link media converter on a DIN rail other than using a zip tie. I found that https://www.thingiverse.com/thing:725188 was suitable but needed to be specific to the networking hardware. To add…
I created this cover to protect the amplifier tubes on an MC240 which was missing the original cover. Reproduction or original replacements were more than I wanted to pay after restoring the electrical components of the amp. The two…
Stepper Motor Driver TMC2208 V3.0, A4988, DRV8825 Control Extension Shield Board
The Psion MC series has two expansion slots at the back, mine came with two expansion ports, other owners have no expansion ports or covers. This design contains a “Full Expansion” model which fills the entire slot, and an “Empty…
Replace the existing short knob for the petcock on this CBR250RR MC22 with this one and now can then reach it with gloves on whilst riding the bike and select the reserve when we hear it splutter as well as turn off the fuel to let the…
Gridfinity bin for a m10 MC2 ER25 collet holder and the spanner. added an extra cutout for general use. i made the cutout for the spanner deeper after i printed it. the spanner i use is a little bigger then 4 grid units so it sticks out a…
Just a Simple made in Blender, for the Behringer UMC202HD. It's not tested yet, since I don't have a Printer available, but it should fit in theory. The screw holes have no specific size. Reach out to me if you have any questions or want…
Here is a splash guard for the top cover modeled after seeing one in the group previously. Instead of screwing into the frame this just uses magnets to attach to the spindle plate and magnets on the side of the enclosure to hold it all in…
Small enclosure with lid for the Adafruit EMC2101 board for PWM fan controllers. Includes a cutout to mount header pins, as well as an offset tab for bolting the case to something with a M3 bolt. Requires 4x M2x10mm bolts to secure…
Vertical or gorizontal mount for this external Driver. Based on Fabian spring din rail mount. Between holes 52.5 mm. Extra - 50 mm fan mount. Optimized for print without supports.
Paramètres d'impression recommandés Matériau : PLA ou PETG. Remplissage (Infill) : 15-20% (grille ou gyroïde pour la solidité). Supports : Pas de supports nécessaires selon l'orientation. Résolution : 0.2mm.
As far as I know, this part has been discontinued, you can make it from various materials or use it as a carbon fiber mold.
I needed a stand to keep my stepper motor drivers off the metal base of my PnP machine - I'm upgrading my TVM802 to OpenPnP with custom electronics. Modeled in FreeCAD (original available). # Instructions No support required Print at 0.2…
Vertikální držák na standardní DIN lištu (TS35) pro mediakonvertory TP-Link řady Omada / Network Accessory. Kompatibilní modely (rozměr 94,5×73×27 mm): 100Mbps řada: MC100CM, MC110CS, MC111CS, MC112CS Gigabit řada: MC200CM, MC210CS,…
I got my first ever 3D printer for Christmas and I had this idea for a while. By no mean is it perfect, but its my first time using tinkercad. i opened up the umc22 out of curiosity and was surprised by how much wasted space there ways.…
I recently, as of September 2026, acquired an EMC2 25 Bay JBOD, however buying used and shipping tend to cause a few issues. One of those issues was a few of my drive caddies were damaged in shipping rendering them useless and broken so I…
This jig is designed for the perfectionist. Specifically tailored for BigTreeTech TMC2209 modules , this tool allows you to align and seat four heatsinks simultaneously with surgical precision. Whether you are fully populating a Manta M8P…
Replaces a broken post on a LG Countertop Microwave LMC2075ST. The knob post can get broken if someone pushes on the button on the wrong side, or if the knob is impacted from the side. If you break a post the knob will be diagonal when…
Summary I needed another way to mount the TP-Link media converter on a DIN rail other than using a zip tie. I found that https://www.thingiverse.com/thing:725188 was suitable but needed to be specific to the networking hardware. To add…
This is an extended magazine baseplate for FEG SMC22 magazines to add a little bit more room for your pinky.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/d7gOSNRZzj3 Category: 3D Printing
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1GZYbiJiC7n Category: 3D Printing
I upgraded my AM8's electronics stack from an Arduino Mega to a Re-ARM a while back.* The Re-ARM doesn't connect anything to several of the AUX2 pins, so the usual approach to run TMC2130s is to commandeer the pins for the Ethernet…
Easy to print wall mount to install the tp-link MC200CM Ethermnet media converter.
