Liczymy pasujące modele…
This is a replacement wrench for the Melissa & Doug Take-Along Tool Kit Wooden Toy ( https://www.melissaanddoug.com/take-along-tool-kit-wooden-toy/494.html ). Design I copied the main exterior and tool dimensions of the original wrench,…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
Very simple wall mount for the remote AC200 Meliconi. Here is the remote: https://amzn.eu/d/5c9Hx9s I never found one for this model of remote, and I create this with 2 holes for M4 screws.
Wydruk około 3,07 €–3,76 € nettoWstępna wycena jednego wariantu
Printed in PLA. This plunger works well with the compatible silo: https://www.printables.com/model/919556-senseo-silo-for-coffee-grind
Wydruk około 0,94 €–1,14 € nettoWstępna wycena jednego wariantu
This is a replacement screwdriver for the Melissa & Doug Take-Along Tool Kit Wooden Toy ( https://www.melissaanddoug.com/take-along-tool-kit-wooden-toy/494.html ). As you can see from the picture, the original had an unfortunate encounter…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
We needed a replacement peg for the Switch & Spin toy, so off to work I went and combined the most perfect five cylinders in just the right way to create it. Print it with a layer pause at 2.60 mm and insert a 12x1.6mm magnet (the cutout…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
This is a full set of replacement blocks for the Melissa & Doug Beginner Pattern Blocks (#528 or 10528). In the picture, you can see a replacement yellow triangle for the fish tail, and two originals for the fins. The models are chamfered…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
This is a replacement tea bag for the Melissa & Doug Wooden Steep & Serve Tea Set (#19843). In the picture, the yellow one is the replacement, printed in woodfill PLA and painted. Safety note: The original kit is listed as for children…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Update [2023-10-20]—I have a model with a full set of replacement blocks, not just the disc: https://www.printables.com/model/620841-replacement-blocks-for-melissa-doug-beginner-patte This is a replacement disc for the Melissa and Doug…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
If you use the Coral Accelerator with the LimeLite and you use this (or the original) bracket, see the back-mount Coral bracket here https://www.printables.com/model/908221-coral-accellerator-bracket-for-limelight-bracket
Wydruk około 5,15 €–6,30 € nettoWstępna wycena jednego wariantu
✅ little support material is needed if you lay it flat on the print bed. ✅ Layer height of 0.2 mm is sufficient for a clean look. ✅ PLA is great, but it looks even more classy with matt or semi-gloss filament!
The file is quite big due to the very high level of detail in the fabric, best printed on resin but absolutely printable on FDM as well. Little to no support required.
Happy Halloween! One of my favorite games as of late has been the RPG Bloodborne. 7 years later, and it still holds up. I love the Gothic atmosphere of the game, the challenging gameplay, and more pertinent to my little hobby here, the…
Prusa'nın Shelf Phone Stand modelini ve auroratechchannel'ın Tripod Phone mount modellerini bir araya getirerek, daha dayanıklı bir telefon tutucu elde ettik. Prusa'nın orjinal modeli şahane olsa da, ince parçalar çok olduğu için 3 kez…
My mom recently gave me my Grandfather's 1950's Melitta 102 porcelain 3 hole coffee filter. I thought it would be a good test for my Revopoint POP 3D scanner. I was able to make an autosurface solid model from the point cloud, but I…
After two versions of bean hoppers, falling off my machine I tried and digg into F360 to give it a shot and try my own version of the Melitta Coffeo Solo Bean Hopper. According to other members this design does fit the Melitta Purista as…
A friend needed replacement cubes for their kids' kitchen playset, so I figured while I was at it I'd model an appropriate cube tray. It's a very easy support-free print at whatever settings you feel are appropriate. The cubes look very…
A mount for the limelight 3, with adjustable positions in 15 degree increments. The holes for the mounts are sized for 10-32 bolts (.201"), and adjust from 0-45 degrees. An extra mount file for both the base and the limelight are included…
A mount I made for a robotics competition that works with the Limelight 2+. This is an all-in-one vision processing camera using reflected light so the robot can identify its surroundings. I am not sure if the dimensions are the same for…
a cool mecha melon figure in the T pose see the sizes on one of the fotos would be nice if you do a small rewiew
I printed this piece in Yellow TPU. Should look great in Black or Red too. It is the only Filament available at my disposal currently. :) Should work fine with any other filament.
I made this to compress the rings on a Stihl 031 chainsaw. Plan on making more sizes, if you have a piston size to suggest send email to [email protected] and i will make an stl to add to the project. 46mm for O28 woodboss 48mm for…
Bracket to retrofit a HomeLink garage door opener into a 2023 Tesla Model Y. Remixed rhovey's bracket with the following changes: 1) Changed mounting position to more closely align with the actual Tesla bracket (from pmlody’s design…
Model of Chainsaw Homelite XL2 in scale 1/10 With this scale is intended for SLA printers.
This is a Bean Hopper Extension for the Melitta Barista Coffee Machine Series (T/TS/Smart). I was tired of having to refill the bean hopper every day, so this extension more than doubles the capacity and is a total of 80mm high including…
You may need to scale it down to fit your hands, I probably printed mine too big I printed with fdm at 0.2 mm layers i think
This is a toy key for the Melissa and Doug Vroom & Zoom Interactive Dashboard toy . In the photos, the real key is the yellow one and the print is the red. Print settings: Material: PLA Layer height: 0.2mm Infill: 20% grid Print with the…
!!! THIS CASE IS DESIGN TO BE USE OFF THE ROBOT FOR PROGRAMMING PRACTICE ONLY !!! Due to heat dissipation concern, we only tested the limelight 3A casing off the robot during programming practice only since the case hinder the ventilation…
All the cosplay bits and bobs needed for Melinoe. I'm so excited to debut this new costume! The only back references currently available (January 2023) is magnified screenshots of Melinoe from trailer gameplay. I had to guesstimate…
Wandhalterung für die Türstation Quadra der Firma Comelit. Die Halterung wurde mit folgende Einstellungen gedruckt: Layerhight: 0,2mm Infill: 10% Walllines: 4 Filament: Silver PLA
Just adding a few more names to the list : ) These were part of my daughter's bday party favors.
Construction of the ship began around the year 2263 at Yorktown Station , and was completed following the destruction of the previous USS Enterprise . The ship was said to carry more advanced technology than its predecessor. While the…
This is an angle adjustable camera mount that doesn't depend on friction for use in FRC Robotics competitions. This uses a Hirth joint to allow 2 degree angle adjustability without danger of the position slipping under the impacts seen in…
Fr : J'ai trouvé que le fan duct d'origine de la hornet n'était pas très efficace je l'ai donc redessiné afin d'avoir un refroidissement optimal ! il faut l'imprimer sur la face avant et pas besoin de support ! Privilégier un remplissage…
Melitta Caffeo Solo & Milk, coffee beans extension
We (FRC Team #2199) started using the Limelight 3 camera for April Tag recognition in 2024. Throughout the season, the "cheeto dust" (note coating flakes) and normal dust started getting into the camera and onto the lens. Hence, I…
Dir hat deine Purista zu wenig Platz für die Kaffee Bohnen? Hier die perfekte Erhöhung um ca. 200 Gramm mehr Kaffee in den Automaten zu füllen. Am besten aus PETG drucken. Support nur von der Druckplatte. Happy printing. Does your Purista…
FRC Modular Limelight Mount I was never able to found a Limelight (LL) Mount that satisfied my needs. I need something strong, configurable, something that can mount both our shiny new LLs, and our old, battle tested LLs. Unable to find…
A cover for the popular limelight for FRC with all cutouts. Very easy to print, provides good protection.
Model of a trash tray for used coffee from Melitta Solo coffee machine. But can be used in “Solo & Milk” and “Solo & Perfect Milk” My print was made with PLA. Hotend temp 220 C and bed 60 C. Layer heigth 0.2mm and supports.
The original filter holder I created was wonderful and performed its function of holding filters flawlessly. However, the previous model slid all around the drawer, and even though I said to myself I wasn't going to Gridfinity-ify ALL the…
Scroll down for the english translation… “ AMELIE ” als druckbare LED- Namenslampe. Druckeinstellungen: Infill 8%, no Supports, 0.2 mm (Möglichst die Z-Naht so verstecken, dass sie an den Klebepunkten ist.) PLA (nicht UV-beständig, besser…
Made this for the coffee machine at work... Rotate 90°... Print Settings Rafts: No Supports: Yes Resolution: 0.325 Infill: 5 Category: Kitchen & Dining
This is my version of the Tesla model Y homelink mount. You can buy the homelink module off of e-bay for around $120, I didn't want to pay $40 for the bracket when I have perfectly good 3d printers. Search youtube on how to do the…
Erweiterung des viel zu kleinen Bohnenbehälters einer Melitta Aromafresh Kaffeemaschine. Ich habe zwei Files hochgeladen, eins mit "normaler" Wandstärke und eins mit sehr dünner Wand. Das Teil mit der dünneren Wandstärke ist für…
If you would like to have Homelink in your Tesla, you can buy new set of module + bracket. There is also cheaper option. You can buy second hand device. There not always came with bracket. So I have made one. Original bracket, has clip…
I printed with supports at 15% infill and seems plenty rigid. Print on with the top face on the build plate.
I needed a panel blank but the only Homeline one I could find was not so great. There was on for the QO panels but they are wider. There are build in supports, and I chamfered the bottom to eliminate elephants foot. 0.20 mm layer height…
Scroll down for the english translation… “MELISSA” als druckbare LED- Namenslampe. Druckeinstellungen: Infill 8%, no Supports, 0.2 mm (Möglichst die Z-Naht so verstecken, dass sie an den Klebepunkten ist.) Ich arbeite in der Kinder- und…
Old hanging coffee filter holder need to be replaced. I need one that can hang or can stand on the table. I decided to design my own. I have accepted the print time which is more than 8 hours, to get a sturdy model, otherwise I need to…
Grinder Nozzle Melitta Molino Mod A little upgrade for the Melitta Molino Coffee Grinder. I had the problem that the coffee powder for my espresso spilled out of the "nozzle" so I build a better one. Just simply print it and push it…
This is a remixed design of a circuit breaker slot cover, specifically for Square D Homeline panels. The original design, while excellent, was tailored for Cutler Hammer breakers. I've adjusted the dimensions and clip mechanism to ensure…
Here you can get a hopper/storage module for the Melitta Caffeo Barista TS. Crema and Espresso beans are stored seperate. The original lit fits on the storage module.
This model is a panel mount for a USB-C trigger from Amazon. The trigger can request a fixed voltages from a USB PD power supply for project use. To print this, I split the “Trigger-Insert” file in PrusaSlicer. I also included a “blank”…
Something I made a few years ago when my kids received this set. Keep the game going longer with these extras. This design has gone through a few iterations to achieve the correct interference fits with each item and the original pieces.…
includes his swords and hair i printed it in resin but it also works with a 0.2 mm nozzle
Holds one full box of coffee filters (40). Keep the scoop handy on the side holder. I printed mine in Prusament Galaxy Black PETG
Quick model of the combadge from the Star Trek: The Next Generation / Voyager future timeline episodes. This model uses 8x3mm magnets to allow you to pin this badge to clothing. Just print out the model and pop the magnets in! Check out…
Are your Limelight LEDs blinding your FRC pit crew when they turn on your robot? Are your programmers working late into the night only to have a shining green beacon disturb their dimly lit workspace? Introducing the Limelight 2 LED…
I made the full blade to fit this handle. This blade is approx. 56 cm. long
Don't talk to me or my son ever again Let's keep this short and sweet… introducing the kid brother to the same great LED cover you know and love. Comments and feedback are appreciated, I'd love to see your makes! It's awesome to see them…
Enlarged coffee tray for Melitta Solo coffee maker. The cartridge capacity is about 0.8 kg of coffee. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 mm Infill: 20 Filament: Prusament PLA, PETG…
LimeLight V3 Camera mount controlled by servo motor. The Servo motor is connected directly to RoboRIO PWM ports.
Just a quick design to replace any missing coins for the Melissa and Doug Vending Machine toy.
Remix of model by Solid_Alexei from Thingiverse
The Demon Sword Lostvayne of Meliodas for Dummy 13 / Action Figures Prints in separate parts. NO AMS NO SUPPORTS Glue is recommended. Scaled to a standard D13 Model (100%). Check out my profile for more Dummy 13 weapons and accessories.…
Scroll down for the english translation… “ MELINA ” als druckbare LED- Namenslampe. Druckeinstellungen: Infill 8%, no Supports, 0.2 mm (Möglichst die Z-Naht so verstecken, dass sie an den Klebepunkten ist.) PLA (nicht UV-beständig, besser…
This is a traditional christmas ornament from Finland called Himmeli. Or. My take of it in 3D-printable format I should say. Traditionally it is tied together from soaked wet straws and hung from the ceiling. It is believed to bring good…
Gehäuse : Dunkles Filament = 15 % infill Deckel: Weiß = 100 % Wenn man ein helleres Gehäuse haben möchte dann die Wandlinien erhöhen auf 6 und 20….25% Infill
This was a quick project to cover the chain and bar on my little electric chain saw. Nothing fancy. Nothing to keep it in place so I use a bungee. Remixes are welcome.
Printing I printed with PLA+, layer height 0.2 mm. Assembly Remove the anti warping brims with a sharp hobby knive. Use double sided tape to attach the holder to the wall or inside a cupboard.
Makes room for more beans.
“This clock is a magical clock… no, actually a sci-fi clock!” - Amelia Watson I have been a long time fan of Amelia Watson from Hololive English and wanted to make my own Time Travel clock like hers! I specifically designed this model to…
Parameters of note in the f3d file include: Holder depth - 2 inch by default (for 100 filters). Wall angle - 40 degrees for Melitta, 45 for V60. Holder top width - Width of the holder at the top, 6 inches by default. Adjusting these…
Amelia Earhart (Lady Lindy) – Buste 🇫🇷 Description & contexte Ce buste représente Amelia Earhart , figure emblématique de l’aviation du XXᵉ siècle et véritable icône de l’audace et de l’émancipation féminine. Surnommée Lady Lindy en…
Customized version of http://www.thingiverse.com/thing:739573 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=739573
V pripade uplneho otevreni lze vlozit vicko na vetraci past https://www.chov-cmelaku.cz/produkt/vicko-na-vetraci-past/ Pri vetrani je !! NUTNE POUZIT NASTAVEC NA VETRACI OTVOR !! jinak si do cmelinu sami pustite skudce…
As a Startrek fan, I always wanted to have my own Starfleet insignia and as a 3D designer, I could recreate them easily. Those are the insignia from the Kelvin alternate timeline used on the JJprise and USS Kelvin. Command, Operation and…
This is a holder for Melita #2 coffee filters. Should also work for similar filters, but I have not tried. The design is inspired from a couple of other holders I saw here https://www.thingiverse.com/thing:4546103…
I printed this model on my Bambu Lab P1S using eSUN PLA+ filament, 0.4 mm nozzle, 0.16 mm layer height, 2 wall loops, 15% infill, automatic slim tree supports at 20 deg. threshold and on build plate only.
The AMELIE vase has a soft, flowing form with elegant curves. The striped texture gives the design a refined character. It's a vase that stands out with its feminine appeal and organic shape. Place it on your shelf or coffee table and let…
Basic loading funnel for the Limelight Frolic Thermal Extraction Device.
A modell of Kobayashi Maru from Star Trek 2009.
I haven't printed this yet, I made the model and rendered in AR with Shapr3d. As a fan of the game(s), I thought it would be fun to make. It could probably be rougher looking (more jagged edges without having such clean lines), but I…
Replacement parts for Melissa & Doug Construction Set in a Box This model provides replacement components for the Melissa & Doug Construction Set. These parts are designed to replace missing or broken pieces and keep the set usable. The…
Replacement set of measuring spoons for the Melissa and Doug spice rack set
Silo for MELITTA Purista coffee maker. Height of 70 mm. Silo pour cafetiere MELITTA Purista. Hauteur de 70 mm.
While the original cardboard boxes for Melitta coffee filters are unobtrusive, serve the purpose of holding filters, and have lived comfortably in our kitchen drawer for years and years now, I wanted to practice something different with…
Mount for Limelight vision to FRC robot chassis
A replacement key for the Melissa and Doug mailbox set
cover up that frolic with bumpers and a split case for travel. print in tpu 95a
nice little keychain or can even be used as an attachment for a school bag pencil case e.c.t
I widened the platform/disc that sits on the coffee cup to where it will sit securely on top of larger mugs.
vous avez un fichier en PDF pour vous presenter les ameliorations que j'ai apporté sur la Prusa XL Sur ce PDF, vous trouverez les explications ainsi que les liens de téléchargement.
A basic limelight mount for FRC uses 4 35mm m5 screws and 2 m5 screws (any size). Made by Deniz Alp Sayar
A remixed version of this model - https://www.printables.com/model/106893-melitta-solo-large-coffe-tray I needed it a little shorter and with a little window to see the status of the beans. I have a little place for it under some cabinets…
