Liczymy pasujące modele…
A desktop nameplate. Customize it to show your name or text! To do that, please install OpenSCAD on your own computer and follow the short customizing instructions on this page or use these more elaborated instructions . Or check below…
Very simple ball holder for bowling balls for my buddy Ryan. This one incorporates a separate nameplate you add text to via Prusa Slicer.
Fully parameterized/customizable Nametag created on OpenScad. Open the .scad file using OpenScad. All options should be on the right side of the window under “Custom Nameplate Configuration” tab. You can type ANY TEXT you want, choose its…
The desktop nameplate, with 1250 first names included. Print instructions You can print the nameplate without any support, in the “face up” direction as in the STL. This way the front will look smooth and clean. Activate ironing to get…
Haix XR1 nameplate customizable three lines About Fusion 360 works best Haix XR1 Namensschild anpassbar Drei Zeilen Über Fusion 360 funktioniert am besten
I wanted a simple normal sized desk nameplate for my shared work studio. I started with one design, then just got carried away… So there's lots to choose from, everything prints in place, and can be made in under one hour (depending on…
Emboss the name a millimeter or two into the top of the nameplate piece then do a color swap on the top layers to make the name stand out. Simple instructions on how to customize your own nameplate in Tinkercad are located here:
Simple trophy base I put together that keeps track of winners over time. The hole at the top will fit a standard (1/4") bolt so you can mount a trophy. You can either subtract text from the nameplate (works best if you use a different…
Trophy was printed without supports and with 20 % lightning infill. I have added a blank label for your creations. Interchangeable name tags are practical. There are no more winners or losers. According to the results, the players choose…
Note: This is currently a prototype. Print at your own risk while I sort out everything. If you do print it, I would love feedback to improve this further. Supports SleeveKings sleeves or smaller Magnet Size (optional): 8x1mm These have…
Two pieces version (with replaceable insert): I went through quite a few iterations to come up with a working model but I am happy with the results. I wanted to be able to print the text with a color change which meant it needed to be…
Download OpenSCAD for FREE and EASY https://openscad.org/ This is a customizable Pelican 1510 nameplate. Download the OpenSCAD file and edit the parameter containing the name. Edit the Parameter containing your name Preview and render the…
A desktop nameplate, subtext “master of disaster”, with 1250 first names included. Print instructions You can print the nameplate without any support, in the “face up” direction as in the STL. This way the front will look smooth and…
This is a customizable nameplate that is self-centering vertically and horizontally. The block is tilted back 25 degrees from the vertical. It is designed to be printed in two colours. Print instructions Category: Signs & Logos…
parametric Doorplate / Nameplate parametrisches Türschild ------------------------------------------------------------------------------------------------------------ Disclaimer: I made this to be able to swap the doorplate at the flat of…
This insert fits everything from the trooper pledge (and the „bonus“ map pack) inside the white big box for Rainbow 6: Siege - the board game. Box setup (top to bottom): rules top layer: barricade_tray : all barricades breach_tray : all…
Update 2.5.2025 1+1, 1+2 and 1+4 combinations added. Enjoy :-) Update dimensions of part: Plate_Insert_Border for better accuracy. Yes it is backwards compatible. Hi, I was looking for universal name tags for office doors that I can use…
Kann auch für das Werbung-Indikator-Schild verwendet werden :) Print settings: - Material: PLA White, Red, Green - Nozzle: 0.4mm - Layer: 0.2mm - Profile: 0.2mm speed - Supports: no Made with passion by Xargas! Like what you see? You can…
Just open the Enclosure Nameplate with Text (Slicer Proj) file int PrusaSlicer 2.6+, modify text and print with color change. To be attached with 4mm M3 bolts.
A fancy desktop nameplate, extruded from the letters themselves. The picture shows "Willi Wusel", a german name used by some like a placeholder, similar to "FooBar" in English. Customize the object to show your own text: Install OpenSCAD…
Full list of included nameplates can be found in pictures. The naming format for the files is: Player-[BaseSize]-[Width]-[Name] BaseSize is 25, 32 or 40mm Width is 90 or 120 degrees. This tells how wide arc of the base rim the plate will…
Increased size by 150% and added stand and nameplate.
Hi I made some keyrings for the family, which I just wanted to put as an idea here in thingiverse. In the attachment now also the illustrator and autocad files. Happy printing MFG Chris Follow me on... prusaprinters.org thingiverse…
Fixed the second Excavator not being level
Customized nameplates for the Apache weatherproof protective cases from Harbor Freight or Strongway from Northern Tool. This is a replacement for the plastic piece located near the handle. Its angled edges make it easy to secure in place…
The clear plastic nameplate caps on my Shimano Tiagra shifters cracked at the very small screw holes. I paid for a replacement OEM set which also ended up breaking. So rather then pay for another OEM set I created this model I can easily…
A desktop nameplate, subtext “Chief Of Unicorn Division”, with 1250 first names included. Print instructions You can print the nameplate without any support, in the “face up” direction as in the STL. This way the front will look smooth…
This is an openSCAD model that you can personalize and include a Voron logo if you want. The Customizer works well for this, just load it into openSCAD, open the customizer, and you can enter the text you want and choose if you want to…
Print on side. Can scale if needed, any layer thickness is fine.
This is a look-alike for a Dodge Challenger classic emblem. Width: 25cm, height: 4cm. Best to print with PETG or other filament that is suitable for automotive. Normal PLA will get too hot and melt under sunlight. Additionally, it's worth…
This is a simple heart shaped nameplate. The text is customizable in PrusaSlicer (have not used others, but would guess so). Just edit in the 3mf file when loaded. Edges are chamfered, curved corners. Flat back. It's setup for a filament…
This is a basic nameplate for the Prusa enclosure. I've included a blank model and one with my name. It has one "rivet" and two nubs to make it sit straight. The difficult part is getting the rivet to come out and not break when…
Configure the text on this nameplate using the included Fusion360 source file. Add a filament change at the layer height where the text begins.
The adapter wraps the edges of an OVERTURE 1kg cardboard spool to use in the Bambu Lab AMS to prevent carboard debris. Added the OVERTURE nameplate for easy identification in case you have multiple brand ring adapters. Includes nubs to…
Rolls Royce nameplate for easy attachment to the turbine stand. Color the plate in your slicer. You can find the stand here: Jet Engine Stand - Structural Design for working Jet Engine von flok | Kostenloses STL-Modell herunterladen |…
I was making a novelty trophy for a coworker and needed a base for it. Wasn't able to find anything that worked for me, so I came up with this quick design which fit the bill. The pedestal is made up of three components…. The Base which…
Nameplate - License Plate - Nummerschild for Bobby Car classic. You just have to add the Name/Text you want. STEP included, feel free to remix.
I created this model in OpenSCAD and then applied the callsign text in Bambu Slicer. I've included an example STL with my callsign, KQ4VYY. To print this model, I use a Bambu P1P with AMS for dual colors and a 0.2mm nozzle, but this could…
This is a large (full print-bed) box made for small tools or whatever you like. It has a working latch and a nameplate holder to keep you informed of the contents. No support is needed and it prints pre-assembled. Updated latch hinge to…
script to make multi material nameplates (text is embedded)
The nametag for Peli 1510 Case I found did not fit my 1560 case I made this. It also fits the 1510 and 1535 Cases with just standing a little bit over the top. But you can still close the Case.
Customizable key nameplate for https://www.printables.com/model/568241
Customized version of http://www.thingiverse.com/thing:432647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=432647 Instructions Using the following options: text_size2 = 10 text_size1 = 6…
English: Deutsche Version ist weiter unten Tired of your Haix XR1 boots looking like everyone else's? Personalize them with this custom-fit nameplate designed specifically for the 29mm heel strap! This model slots perfectly into the Haix…
Full list of included nameplates can be found in pictures. The naming format for the files is: Star Player-[BaseSize]-[Width]-[Name]-[wStar] BaseSize is 32 or 40mm Width is 90, 120 or 150 degrees. This tells how wide arc of the base rim…
I printed this with 0.25mm layers, 2 walls, 5% infill, no supports, and scaled down to 100mm wide. I used DO3D Silk Multicolored Rainbow PLA filament. Need a quick print to test your first layer?
This is a simple star shaped nameplate. The text is customizable in PrusaSlicer (have not used others, but would guess so). Just edit in the 3mf file when loaded. Edges are chamfered, curved corners. Flat back. 120 mm x 120 mm x 4 mm (2…
Here is a blank nameplate template with a custom base that I made to put on an office desk. You can add text to the plate however you like (I included both the STL and a gcode file)
Added two blanks in different sizes in case you want to write on the labels by hand. Drop me a comment if you need a blank one in another size. Customization: To change dimensions in Fusion360 go to - change parameters - (see the…
Got a Ninten-Drawer? Customize it by designing your own nameplate! The upper label are will be hidden under the front edge of the Ninten-Drawer. That are has been marked off in the model of reference.
Nameplates for plants - ***Free customizable*** you also can find a .step-file for custimization attached
Shield for mounting busts or anything else you want. Not sure how to make a slot for a screw, but i figured mounting tape will work. Nameplate is attached for embossing. Start color change at layer 24 for the nameplate.
Super Mario 3d world themed 3d-Nameplate Make your own custom Nameplate, all letters are included. Combine them to spell your name as needed. Prefixes such as "Super" and "Mega" are included, they are slightly smaller than the individual…
This is a remix of the already nice steel sheet and nozzle stand from Printables: https://www.printables.com/it/model/398850-bambu-lab-steel-sheet-and-nozzle-stand-with-scrape (Original design:…
I wanted to test the text function in OpenSCAD. This is a small nameplate that I made for my daughter's school desk. My work is all free forever. If you want to support my habit you can keep me caffeinated.…
Hi ! This is a customizable plaque to display your name on your desk. there I have nothing more to say
Made a display in the shape of a baseball field homeplate. there is enough room to add text to the top of the plate, see pictures.
You can make it beautiful by using a color change. Layer height 0.2mm recommended
This is a nameplate for the Sumo XL Enclosure that says "PRUSA XL". Print with two tool-heads. The lettering is offset by the base by a fraction of a mm to allow for easy painting.
This is a nameplate base for the Torbol Quad Pitstop Backpack pro. Please print with flexible material or TPU for better results. Use any 3d file editor to add your name.
You will need 18 6x2mm magnets (and make sure you get their direction correct when gluing them in) to hold everything together and to make the base magnetic. Edit w/ OpenSCAD, editing $row1 and $row2. And print 2 copies of the nameplate…
Zum Befestigen und verdecktem Tragen von Kydex Pistolen-Holstern und Kydex-Scheiden TEK-LOK kompatibel einfache Herstellung und Montage mittels 25mm Nylon Gurtband (Cargo Straps) kein Nähen erforderlich For attaching and concealed…
Deutsche Bahn nameplate
I uploaded the 3MF which should include a stop to change filament. I used Overture Black PLA for the base and Prusament Oh My Gold for the lettering Source project for further tweaking:…
Nameplate for a Peli/Pelican 1500 case. Sketch your letters on and/or logo on the face and then raising them by 1mm works well. Fusion file included. Print instructions Unassociated tags: flight case, Name plate Category: Sport & Outdoors…
Since the old covers for the nameplates of our mailboxes held partly only with tape. There I want to change them to new ones. The original ones from the manufacturer of our old letterboxes were very expensive that I created this template…
I created a small nameplate with the name, "Isla".
Object Description: Ersatz für Kunststoffschiene-Halterung 538.002.45.01 von MEPLA. Diese wurde in Häcker-Küchen und von anderen Küchenherstellern in Schubladen verbaut. Die Schienen sind nur noch selten gegen gutes Geld oder vielleicht…
Making cabinets, and I needed a way to quickly note what drawers have what items. Each nameplate is about 5 inches wide by 1.5 inches tall by ~1/2 inch thick. This way I can tell the kids to head to a specific drawer to pick something up.…
Make sure to print with text orientated so that the flat edge is the top. The 3 tapered edges insert into the case. I found using an embed depth of 1mm works well to get clean text. The first few layers are a bit muddled.
An upright desk decoration for the Barbie in your life. Measures 75 mm x 30 mm, can be scaled to any size. Color change at layer height to make the letters pop. Two different versions, flat and contoured bottom.
I created this based on the USB Cover by Luis Suarez in order identify my machines more easily at a glance. There are two parts here: One is the USB Cover and the other is the backing plate. Simply throw these in your slicer, add some…
I really wanted to print an insert for this game because the base one that comes with it is awful but there were no retail / all in gameplay pledge size inserts. However with a little tweak to Hextra's miniatures insert I was able to make…
Customizing Open OuterPart.FCStd in FreeCAD Delete mesh “Body (Meshed)” Select “Body / Pad001 / ShapeString” in Model Explorer Adapt “FontFile”, “String”, “Size” and “Tracking” If needed change “x” and “y” position in “Placement /…
The arms are meant to be printed on their sides for strength and clipped into the baseplate. the Nameplate slides in from the side.
I recently moved and created this nameplate for my door. It uses exposed infill as a design feature to make it more appealing to the eye as well as filament change for the border and the text to make it readable. I used the Gyroid infill…
I created this simple and customizable tag that you can tie to your pet's collar or use as a bracelet. It is sufficient to print the letters you need in the color you want and pass them through a string or a metal bracelet. You can also…
A little Toyota Supra name plate for the amazing Motorcycle Roller Chain Key Ring from Bootjevaarder: https://www.printables.com/de/model/180357-motorcycle-roller-chain-key-ring A Toyota Supra is not a motorcycle, but I wanted to gift the…
this is a nameplate [remix] for the original prusa enclosure, to put it ontop of the doors. i've included… - the fusion file - a prusa slicer project with positive & negative text Modifications / remixes are welcomed! read the “difference…
Simple “Tiffany” nameplate 109mm L x 24.3mm W x 40mm H
Peavey logo nameplate in the style of their professional audio line from the 90s. This was also used on some amplifiers most notably the 5150. Story goes that Ed wanted something different than the normal pointy Peavey logo on his…
A friend asked me to print some name plates for his apartment building's mailboxes. I'm writing these instructions for myself, in case I need to print more later. You can use this model to make different sized signs with text – just…
UPDATE: 2/09/2024 Updated the Top, Middle, and Bottom interlocking nameplate holders (INH). Files are: TOP INH-7.stl, MID INH-7.stl, BOT INH-7.stl I removed the embedded TOP,MIDDLE,BOTTOM text and replaced with a simple up arrow ^ in the…
My OpenSCAD files read the original SUMO XL enclosure file "SUMO NAMEPLATE PLAIN [x1].stl" which was produced by 3D Sourcerer , @3DSourcerer . The photos show the printed nameplate. I used two colors in my XL5 with a 4mm nozzle and…
This elegantly designed emma nameplate is a functional 3D printed product that adds style to modern interior decor. Designed with clean lines and a minimalist approach, it is ideal for desktop or bookshelf as a decorative accessory. With…
Jett Valorant 3D Nameplate + Ability Icons (All-in-One STL) This is a 3D fan model of Jett from Valorant, featuring his name and his 4 signature abilities – all included in one STL file. Each piece is designed to be printed separately,…
Layer height 0.2mm, Nozzle 0.4mm, change Filamentcolor after the first five layers
it's a bone-shaped nameplate for your dog. it's blank so you need to customize it.
Hello!! Here I have made a mod for my drum kit that allows you to add a customisable Name Plate to the “Rack Tom 1”, "Rack Tom 2" and the “Floor Tom 1” of my full size drum kit, this is a very easy mod that makes the kit pop with…
Link to the swords - https://www.printables.com/model/940529-adventure-time-finns-swords The rack is in sections, meant to be glued together then nailed to the wall with 2mm diameter pin nails, that are specifically shaped for each…
Have a small business? (Like me) Use this as your official nameplate. Make it stretchy or regular, it just works! This can also be used as a replacement if your regular nameplate broke. Still be respected as an entrepreneur and let the…
I needed some name plates for some other models I was working on. So I wanted to share what I had modeled. Let me know if you have any questions!
A few US owners have hacked their RWD Kia EV6 and Hyundai Ioniq 5 frunks by replacing the small OEM compartment with a roomier Harbor Freight Bauer Modular Toolbox. The Bauer nameplate on this toolbox can be popped out with a screwdriver,…
Recreation of the nameplate from LILYGO's 3D file for T-Echo . Customize it with your own text using your slicer, Fusion 360, etc. Updates: 2024-06-12: Increase dimensions by 0.2mm for a friction fit, since the original nameplate is glued…
Design your own eye-catching nameplate with a dynamic, wavy-text effect! This customizable OpenSCAD model extrudes each letter to a random height, giving a fun and modern look to names, labels, or signage. It also includes a mounting…
Full list of included nameplates can be found in pictures. The naming format for the files is: Support-[BaseSize]-[Width]-[Name] BaseSize is 32 or 40mm Width is 90, 120 or 150 degrees. This tells how wide arc of the base rim the plate…
A flattened name plate.
