Liczymy pasujące modele…
I want to say this is a pretty standard golf tee, just it is asymmetrical to be printed flat. This should help strengthen the tee due to the lengthwise layer lines. Disclaimer: I'm not the golfer, I was making golf things for my dad, and…
A moder take on the tradicional star plant pot - will fit your plants and interior beautifuly! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a stroneger print)…
An easy to print geometrical design of a cute and cozy Christmas tree. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
My horse head. View my other models too. Enjoy printing and follow me!
A simple and easy to print vase mode pot and planter for your plants. Best to print using dubble layered vase mode settings, using any filament you want. Happy printing :D
I use this for making obstacle course for Sphero droids, but it will be great for any RC toy like cars for your kids! Size Base 45mm x 45mm Hight 57mm Wall thickness 1.2mm Main features Stackable - for easy storage Fusion360 file included…
A simple yet very decorative design flower pot inspired by the structure of multiple intersecting crystals. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outter…
WaveShare 7.5" e-Paper case - symmetrical and without holes on the outside. Note: There is a new variant available now too. Check it out here: https://www.printables.com/model/1400457-school-timetable-with-epaper-display Features: For my…
v2 edit: added a pommel! Just print it and put it on top of the arm for a nicer grip when you take a towel! (thanks to @jurassic73 for the feedback) 15cm wide paper towel holder, with minimalistic geometric design. It saves a lot of…
https://en.wikipedia.org/wiki/Deinonychus
A simple yet very decorative design flowerpot inspired by the structure of multiple intersecting crystals. Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
A simple yet very decorative design flowerpot inspired by the structure of multiple intersecting crystals. Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
All parameters are calculated, and you can choose number of latches (1 or 2) 13 July: upd to final version. Changelog: If "Height Box without line" > "Internal Height Box", there will be no horizontal line. Change coefficient "Between…
This is geometrical fox that is supposed to be mounted on wall
This is a symmetrical stand which may hold almost every mobile device from the smallest iPhone till the 10.5" iPad. compact design: only 85 mm wide easy access to home button or home bar the other side can be used as a pencil holder
WaveShare 4.2“ e-Paper case - symmetrical and without holes. It can hold up to a big 10000mAh LiPo battery and has a mounting point for a ESP32 - Lolin D32 For my projects I wanted to have a symmetrical case to mount my often used…
Printer: Ender 3 MAX Infill: 15(not needed) Quality: 0.16mm Printing Time: around 13 hours Size: (H: 17-18cm W: 14cm L: 12.5cm; fits perfectly on a “average” Human head(tried it on my 14 yr old brother and it did also fit very well ))…
Just a remix of the POP gear hinge, but symmetrical Follow same print instructions MAKE SURE YOU PRINT IT THE RIGHT WAY UP.
ENG Parametric box. Available Fusion 360 file. If you like it and you want to support my work, please donate here: https://paypal.me/StefanoUnga ITA Scatola parametrica. Disponibile anche file Fusion 360 Se vi piace e volete supportare il…
Modifications by myself: Remixed the inner idler to allow for the use of a 5mm x 18mm pin. Modification by Kermit at Build it Basement : (Updated 2/27/2024. This file is in beta. We believe this newest version is near finalized. Feed back…
This year’s Halloween model is a bit more geometric. It could be for candies or for battery candle. The stem that serves as a handle is available to download in two sizes (a tighter or a looser version). For me was better the tighter fit…
Nice little decoration for your wall! This geometrical dragon will make a great addition to your home decor. Structure of the dragon is made so light that a simple two-sided tape can do the job :)
A set of 12 small clay cutters perfect for creating ear rings or pendants from polymer clay, ceramic or porcelain. There are 6 different asymmetrical sizes (50, 40, 30, 25 and 20mm), as both a left and a right one. Best printed solid with…
Why remix it? Remix based off of AmanozyakuLAB 's Yajirobe model in Thingiverse because the original was huge, and also lop-sided in its balance because of the asymmetry. So I made this symmetrical version that uses the nicer smooth wings…
I made this napkin holder because the old one was broken. There are 2 designs available. A small one and a bigger one. I have just printed the bigger one for myself. The used napkins has the following dimensions: 16.5cm x 16.5cm (from…
Hose connector end with water diffuser, 3D printed in one piece from PETG filament. Second part is rubber ring seal remove from the original hose coupling or printed from flex filament Parametrically adjustable: number of intermediate…
Geometric Vase designed to print in vasemode not watertight Dimensions 150mm x 70mm
My eagle head. View my other models too. Enjoy printing and follow me!
Description This is a remix of the awesome “Ultimate Prusa (MK4) casing” by Cal’sTechConcepts . I really liked the way his designed looked on the right LCD side, so I have mirrored that design over to the left for a symmetrical cupped…
Accessoires de jeux de société, pour stocker vos tokens et petits éléments de jeux pendant une partie. Se range facilement grâce aux aimants au dessus et dessous. se maintiennent entre eux grâce aux aimants sur les cotés. En deux…
I've remixed and fixed the Symmetrical submod of BFI (rollback to original mod - pin instead of screw / M5 for extrusion mount / extended the extrusion bracket / other small design fixes) . Print two of each with Voron specs. Additional…
Update april 2023: The Bambu Lab X1C and P1P are printing more secure as my Prusa's so I've minified the tolerances to make it print great for printing at the Bambu Lab X1C and P1P === I had some problems using the otherwise great…
print time: 1h 30min filament cost: 3m 1 gear size: 30mm spins freely check my other prints. I will be glad full for some feedback ;) enjoy
The stand is loosely based on my original design, I made it for a generic 20x18 monitor base (it is 20cm wide and 18cm deep)
Testing and modeling different geometries. This one can be used as a tealight... 7Corner Structure. Bends one time horizontaly on the outside surface but not on the inside. This small manipulation results in an interesting star shape! I…
Formas Geométricas, Circulo, Triangulo, cuadrado
This is a specialized version of the 'Pluggable Containers' thing: https://www.thingiverse.com/thing:4675184 . It lets you create different symmetrical pluggable containers in the openSCAD and thingiverse customizer. These could be used…
This is a very handy paracord/string ratcheting winch design that can also hoist and cinch. It is very easy to print, requires no supports, can be printed in pretty much any material at any % infill (100% for strongest). Instantly ready…
This is a remix of Michal Fanta’s excellent Low-Poly Mannequin Head made by mirroring the right side of his model and trimming the bottom a couple of millimeters. Since I only needed the head, the model was split horizontally at the top…
This low profile DIN mount for the Manta M8P v2 shifts the board off center on the rail. There are two different versions available, both moving the center of the board by 10mm but in different clamping directions. Mounting holes are…
Symmetrical case for WaveShare ESP32-S3 4.2inch RLCD Simple and fast to print case with symmetrical borders around the display. The case allows to access the USB-C port and SD card slot and comes with 3 little button extensions for the…
There are two files: Spider man and his base. It was made on Fusion 360. Printed with White PLA+ No supports No raft
Base size is 215x100mm my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.16 - 0.28 Walls: 2 Infill: 8% Material: Brand: Prusa Material: PLA Color: Galaxy Black printed on Creality Ender 7
taza geometrica para el polimero subliplast
A lovely lamp for your house Print instructions Buse : 0.4 mm Précision : 0.15 Température de plateau : 50° Température d'extrusion de la buse : 210°
I fell in love with the original and can't stop making them, but the asymmetry of his face was giving my OCD anxiety. His face now is the same on both sides and looks more even. The picture of the print is fresh off the printer, with no…
These are replacement front idlers for Vorons (and Voron-based machines). This design is available for Voron Trident and Voron 2.4. SBFI for Voron 2.4 4× M5×30 BHCS 4× M5 hex nuts 2× 5mm-diameter pin, 18mm long 2× M3 t-nuts 2× M3×16 BHCS…
That's basically symmetrical version of @Matrix's wine stand. It bothered me that original model is not symmetrical so I remixed it.
print time: 2h material cost: 4m size of gears 20:40
Another "two parts go together to form a cube" puzzle. Best if printed in two colors. Print instructions Orient the model so that the face that looks like a letter "D" is face up, and it'll print without supports.</p> I find 33mm the…
Measure the upper and base diameter of you existing pot and the height. Depending on the shape you should substract 3-7mm on each measurement, then adopt the parameters in the Fusion 360 file. If you want, you can also adopt the amount of…
My panda head. View my other models too. Enjoy printing and follow me!
No Supports Needed. You Can Resize The Model By Remix It / or on Your Slicer. UPDATE : Added vase mode files. For vase mode settings I used : - 0.4 mm nozzle with 0.8 mm layer width - 0.2 mm layer height. If you will put a plant that you…
I needed a symmetrical snowflake so I took this Frozen design, cut a 30 degree pie slice and mirrored it around. It's Frozen reminiscent, but symmetry was more important to me than accuracy for the Christmas decoration I'm making.…
There are two files: Homer Simpon and his base. It was made on Fusion 360. Printed with White PLA+ No supports No rafts
One of several tealights I designed while I was at College and then worked on bit more as I do like candles and experimenting with new materials which is why I even casted them in concrete and resin. I aimed to make them simple and…
These are the left and right Z Bracket that are suitable to be used with Creality Sprite Extruder Pro that prevents the extruder to hit the brackets and allows the usage of full bed size of 235x235mm vs the limited version of 215x235mm.…
I redesign ztop of Ratrig V Minion because I prefer a a symmetrical piece, Its more beautiful than original.
I designed this magazine adaptor using a 3D scan of the Dart Zone Max Stryker 2.0 so the shape of it better follows the rest of the blaster. It is also shorter, and has much bigger flair to the magazine well including opening up one side.…
.15mm layers TPU 95A Best if printed standing up and painted on supports for the bottom near the bolt holes and bridge of the curve.
Geometrical Vase pot for plant
Supports Are Needed . Screw Holes Included . Use Hard PLA / PETG Matrial For printing The Model To Hold Your Plants . Enjoy & Share your prints with me !
I'm really glad that Pwnage Ultra Custom has fully-modeled, perfectly-scaled models of their mice on their website. Allows me to pull it off the website and convert it to .stl's for people to make replacement parts for them. Some parts…
There are two files: Bart Simpon and his base. It was made on Fusion 360. Printed with White PLA+ No supports No rafts
Upd: changed project
Mirrored version
Geometrical Correct Tetra Tower (Balance Game) I like the game but i see some designs where the inner walls and squares looks not identical after building some. And see surfaces get no tolerance to fit each other. Even the bought ones…
I made this remix to fit my storing solution for a TS101/TS100 soldering iron which can be found here: Storing solution for TS101, TS100 soldering iron & addtional tools I made a variety of gridfinity based containers/bins and made a slot…
This is a centerpiece to build an dipol with symetrical feed line @ 450 Ohms (like CQ 553 flex wire). I recommend to use the new version (NG) with the improved and strengthened relief. It is still designed for the CQ 553 flex wire but may…
Doniczka z pdstawką lub bez.
I needed a basic ski jumper that can go down a ramp, so I split the Basic Skier Figurine model by independencetech down the middle and mirrored the better half. You can see my work in this video:…
Dual WaveShare 4.2“ desktop e-Paper case - symmetrical and without holes Dual display version of my “ WaveShare 4.2“ e-Paper case - symmetrical and without holes ” display case as desktop variant. It can hold up to 2 ESP32 controllers and…
Parametrical Screwdriver handle for hex bit (Solidworks), to change you need to use Solidworks 2022 or later
These are results from experimenting with geo patterns and modifiers in Blender. I thought somebody might like it. default size for the vase 7 x 7 x 11.5 cm for the decorative plant pot/pencil holder 9 x 9 x 8 cm (approximately) Printed…
Small change of the layout in the drawer base part. It is now symmetrical and there is no divider under the hole of the plate.
Cap for test tube for medical purposes. All dimensons are changable in Solidworks in equations. The original cap fits for normalized 10 mm Test tube
Asymmetric MagSafe Charger Stand Meet the asymmetric MagSafe charger stand that adapts to the dynamism of modern life while elevating your aesthetic sense. This unique stand combines creative design and functionality, ensuring your desk…
The business plan. Thicker outer walls for wheel stands to reduce likelihood of breaking off Added slots on base outside of wheels for placing status tokens. Kept 3 slots for status tokens behind wheel because you never know when you will…
What does the title of this mean? Bilateral symmetry is where a pattern repeats left to right, but not radially. So, this top looks very different staring down the X axis than staring down the Y axis. Even so, it is very stable and spins…
The only change to the original model is the now symmetrical grid.
Open the source file in openscad. Change the parameters according to your requirements Export the .stl file For fixed to the instrument axis, equip the knob with an M3 screw and a square nut. Also published here
No Supports Needed. You Can Resize The Model By Remix It / or on Your Slicer. For vase mode settings I used : - 0.4 mm nozzle with 0.8 mm layer width - 0.2 mm layer height. If you will put a plant that you will constantly water , I don't…
This is another geometrical pot for a plant. Can be printed in vase mode. It includes a discrete coaster (tight fit).
A single asymmetric trigonal trapezohedron inspired by @DesignMakeTeach's tweet. (Could be used as a fair but funny D6) https://twitter.com/DesignMakeTeach/status/1296179875368370181 Coordinates taken from…
Remix from @sterinli27 s Edge Bracket for “free” under desk mount. So this is a symmetrical version. Printed in ABS black on an BambuLab X1 Carbon
Upd: changed projects, added box without inside chamfers
Drip ring for symmetrical 4-part Itiwit kayak paddle. Simple addition to your paddle to minimize droplets in your kayak. I uses latches that are aleady build in the paddle. Does not require any modifications.
Elevate your table setting with a sleek geometric cup mat pad. A perfect blend of style and functionality.
If you like shapes and plants then this is perfect for you!
A more symmetrical version of the assassins creed logo.
My first ever model shared publicly in 2015 (on Thingiverse). Oh, those were the years with the first Printbot Simple Metal... :) Quick light design for all of you, who wants to use standard 120mm PC fan to cool your prints (area…
Un cuadro con forma triangular para colgar en casa
Stay tunned, probably will post more designs :)
Basic info: Print time: 5-6 hours Filament: AzureFilm Silk Gold PLA Size: 210 mm (maximum of MK3) Weight: 100 grams Model is solid, you have to set top layers and infill to zero. Printed with 3 perimetres at 0,22 mm layer height to be…
The Hat, as created/proposed by David Smith, Joseph Samuel Myers, Craig S. Kaplan, and Chaim Goodman-Strauss in March 2023, is a 13-sided geometric shape that tessellates in irregular patterns, ‘aperiodicity.’ After reading a couple of…
Command presence and symmetry with this striking pair of Twin Wolf Guardian Statues . Seated in perfect alignment atop a shared plinth base, these wolves evoke the feel of ancient temple guardians or noble estate protectors. Their layered…
Saw Jangos 2.4 remix and decided to adapt them for the Trident.
Mirrored Flared design
I created an OpenSCAD skript to define a number of bolts (wooden plugs) in a circular arrangement. Those I use in my large robot figures for splitting the model and making assembly way more simple. I scale up my model to the desired size.…
