Liczymy pasujące modele…
Introducing the Cherry MX Compatible Flat Top Keycap, the 3D printed keycap that makes typing a whole lot more fun! With its sleek and stylish flat top design, this keycap is the perfect way to add a personal touch to your keyboard.…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
A doorstop topology optimised for force on the top and back surfaces. Printing Should print with fairly standard settings. I recommend printing upside-down so that the sloped top surface will end up being flat rather than stepped (see the…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
Bi-stable structures undergo large deformation as they transition between two or more stable equilibrium positions. The most simplest structure bi-stable structure is a von Mises thruss. This model is fully functional and allows the…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
I modelize an atomiser stand for a friend who work in an electronic cigarette shop.
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Videos FULL HOTEND: https://www.youtube.com/watch?v=FDKF7qeqDSg https://www.prusaprinters.org/prints/47884-anycubic-i3-mega-hotend-fan-box-also-mega-s-mega-x This Design fits the original Hotendbox and fan of an Anycubic i3 Mega. Its…
CHANGELOG v1.2.1 - Carriage Bolt Edition Tweaked the Knob + Cover pieces to reduce thin walls and features that wouldn't slice properly. Still requires supports on Cover Piece 1. v1.2f - Carriage Bolt Edition turning knob added, to allow…
The Dragon Door Knocker was a bit poly heavy, so I ran it through meshlab to reduce the poly count a bit for further manipulation. Category: Models
I made this model using my actual shamisen. It has a hole in the neck that can be used to run a 6mm screw rod through so that you can compensate for the pull of strings. You need a 6mm screw rod, a nut, a wingnut and a washer to put under…
The side up orientation should help a little with strength and you shouldn't have any issues printing this as you would with any other model without adding further supports in slicer. Credit to…
If you want to enclose your V-Core 3.1 then ABS will get you higher temperature resistant parts. This whole set of files is optimised to be easier to print with better looking results when using ABS. General Change Goals Improve…
NEW VERSION https://www.prusaprinters.org/prints/48024-fan-duct-optimised-for-anycubic-i3-mega Its getting more and more important to do fast prints. So this CFD flow optimized duct helps. As well you get much better bridges if you have a…
Optimised for mould making Category: Toys & Games
Combine sheets of Nasa Chainmail without needing fiddly middle print joining. Links hold together well, especially on the FDM-optimised form. Use the base connector for combining sheets of the original model and the sturdy connector for…
Hey there, I've previously designed a similar storage for the Bambu X series https://www.printables.com/model/272099-bambu-lab-carbon-x1c-x1-p1s-p1p-with-ams-top-tool- which I use constantly and has been incredibly useful. It has been…
The model uses OpenSCAD to create a custom name plate with your own text. Many of the Oscar models require you to make a name plate in another CAD program and/or print it flat and bend it around the base when the print is still warm. This…
A 10mm long version of the Benchy. Designed to work with a standard 0.4mm nozzle. Will have even more detail with a smaller nozzle. Print with a brim and no supports. This print was done with Prusa PLA with the standard Prusa slicer…
I needed a golf cup for a lawn competition. Couldn't find one that looked like it would be a clean print. So here is mine. Print Settings: Material: PETG, ABS, Nylon Layers: 0.2-0.28 Walls: 3-6 Infil: 8-30% Cubic
Customized version of https://www.thingiverse.com/thing:82533 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=82533 Print instructions Category: 3D Printing Tests Instructions Using the following…
Basicaly an overengineered PS4 controller stand Derived from a 3D scan - https://www.printables.com/model/125924-sony-dualshock-4-3d-scan/remixes - Thank you I provided a full stand file so the optimised one can be used as a mesh modifier…
Messi Remera Argentina Llavero Remix
Remix of the original optimised for minimal (or no( support (i.e. for FDM printing). The base which gets screwed to the mount is 2mm thick that is thicker than the original so the Z offset will need to be adjusted (increased) after…
Reason for designing this None of the inserts I saw for PjotrStrog's rugged pinecil case were able to hold 7 soldering tips without compromises to everything else they can hold. because of this I decided to do some remixing and make the…
Reprofiled for better airflow, better upper strength, and less TPU usage
I've modified the iPhone 13 models to be much easier to print. Print all models with the screen facing down on the bed. The changes I've made include: Removed all voids the model is now solid no invisible gaps behind screen or camera bump…
A 3-way 2020 extrusion joint inspired by Slant 3D's video on printed joints. This does not fully wrap around the extrusions to allow panels to be mounted on the outside which means it is not as strong as the design he showcased in his…
My daughter wanted a new pencil case. She is quite keen on 3D printed objects, and so we designed this one together. The OpenSCAD file allows you to easily change the size, as well as the text on the lid/ruler.
£1 Trolley Token designed to use only 0.88 grams of material and print in just under 4 minutes. Same shape as a British One Pound Coin, so be used in trolley's and swimming pool lockers. Recommended Print Settings Nozzle: 0.4mm Layer…
Knife guard that fits snug to Misen 8" chef knife. Perfect for drawer storage and safe travel. Recommended to print along the long skinny edge at an angle that aligns hex pattern. Printing model on it's flat side is not recommended as…
Required accessories: BL-Touch Sensor Radial Fan 4020 Screws needed: (You can use some of the original screws) 2pcs M3x20 (Optional M3x16) 2pcs M3x12 (Optional M3x14) 2pcs M3x6 (Optional M3x8) 3pcs M3x10 (Optional M3x12) 2pcs. nut M3…
They're too much! It's the Miser Brothers from the 1974 stop motion Christmas Classic “ The Year Without a Santa Claus ” by Rankin/Bass Productions. These models are based on vector images provided by ClipartWarehouse on Etsy and use…
I've always liked the filament spool storage tower, but existing designs waste huge amounts of filament - costing more than it would to buy a storage box. ] This design reduces the printed material by ~50%. I have minimised the wall…
Simple ink shot for filling fountain pens with built in filling systems. Has a built in spout to make pouring ink back into the bottle easier and a wide base to help keep things stable while in use. If you'd like you can buy me a coffee…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model holds the apple pencil to the magic keyboard case so that it doesn't get lost as easily. I love caffinatedprinter design, but I had some trouble getting it to print with PETG, so i made it a little thicker and shorter so I…
"A mount to allow an ATX PSU to be used in the NR200P case. This holds the power supply at the front of the case in front of the graphics card with space to allow the front panel IO cables through. It's based on the one you can download…
A 15cm X 10cm photo frame, optimised for fast 3d printing. Printing instructions 2 perimeters cubic infill 10% no supports 0.2mm layer height Because plastic shrinks when cools down after printing, you may need to enlarge the model on Z…
I will most likely upload other nut and bolts generated from this file The Nut thread cutaway(to prevent extra thin threads being printed on the nut) can be buggy if the nut is not a multiple of pitch. The thread is created from the ISO…
Optimised version of the Slider Lock Latch by @MichaelQ - at least for me. The original version did not print well for me, probably cause I am using a slightly bigger nozzle, probably cause of other reasons. Anyways I also wanted to get…
The supplied files for the universal case from CMF and Printables are a good starting point, but not fully designed for 3D printing, as they are modifications of the injection moulded part design. After lots of trial and error, I have…
There are 4 folders, each with different height (1 = 25mm 2=50mm 3=75mm 4=100mm) and one folder with universal lids. It is crucial to heat the bed for the first layer to 60°C othervise the bottom will be unsufficiently bonded to the…
Customized version of https://www.thingiverse.com/thing:1341482 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=1341482 Print instructions Category: Tool Holders & Boxes Instructions Using the following…
I reworked the wing holder so it actually makes sense from a physical point of view (two of the wings were tilted the other way around so that wind would not have moved the windmill at all) and also added a long bar so you can directly…
A full size model of Demise’s Sword from The Legend of Zelda: Skyward Sword. (Full size meaning it can be printed pretty big, I’m not exactly sure how big. The sword in game is huge, the files probably wouldn’t fit on your print bed at…
I was un-satisfied with the "top" Umbreon model here on thingiverse, I wanted a very smooth model but the closest i could find was a "Low Poly" version named 197_Umbreon and decided to get my hands dirty with Meshmixer and Blender, around…
For the new enclosure of my Prusa printer, I needed a new filament spool holder. I wanted one that is fully 3d printed, but with bearings and also optimized for an enclosure (filament goes directly down). I didn't find one, so I designed…
The Thing - Copper's Demise - 1982 3D printable model.
I somewhat changed the model for better cable routing. Also rounded a few corners inside. M3 nut now can't rotate inside the hole. + Pre-build supports for screw holes. You'll need the M3 6mm or 8mm screw. Print on the flat sides.
This is a remix of the original AirManager V2 Changes: Delta BFB1012M fan which is widely available https://octopart.com/search?q=BFB1012M Philips air filter (4mm shorter, cheap clones available):…
Spanngummi-Haken D 17 für 6 mm Gummiseil längen verstellbar. Es lässt sich durch seitliches herauszuziehen, aus der Verzahnung in der Länge einstellen. Nach erfolgter Einstellung in der Verzahnung wieder arretieren (hineinziehen) . Print…
Easier to remove the stand, looser fit for iron tips
Dos partes (delantera y trasera) que al finalizar de imprimir habrá que pegar.
I recreated the model in PTC Creo and changed it to allow thinner stock and full access for marking out the pins. The idea is based on the “Shawn shim” Rob Cosman uses, by offsetting the parts when marking out pins from tails, by the…
Qui n'a pas déjà perdu ce petit embout sur sa vapoteuse ? Ce modèle est destiné au clearomiseur Zeus et s'adapte parfaitement comme l'original. Vous ne serez maintenant jamais plus en panne à cause de ce petit accessoire ^^
betty boop deux couleurs, changement de couleur a 1.5mm de hauteur
Cables cover and MISECU CCTV camera holder - two versions. The first version of a waterproof box for CCTV outside in the rain. The second version without visible wiring, but only for CCTV under the roof, because water can enter through…
https://www.youtube.com/shorts/mMvVAAAhBs8 UPDATE: Important for BAMBU AMS users: Attach this clip to the right side of the spool. There is a channel on the left side of the AMS that this will catch on otherwise. UPDATE2: Some have been…
I made this "Dog on Premises" using a dog silhouette model from BenV (thank you btw!). I wanted a sign with this particular wording. I was advised that the phrasing “Beware of Dog” or dog warning signs implies that your dog is dangerous…
Mujika’s secretive gift to Emma. The key to unlocking mysteries of the demon world and forging covenants. Print Settings Printer: Elegoo Saturn Rafts: No Supports: No Resolution: 0.05 Infill: None Filament: None Photopolymer Resin Grey…
Printed Example in images was printed as follows: Printer: Voron V0.2 Time: 28min, 57secs. Including heatup of 190c→255c (HE) & 80c→100c (BED) Including homing sequence (No probing) Material: ABS, ‘ Void Black Catyarn ’ Layerheight:…
A set of files in both metric and imperial consisting of various lengths of ruler, protractor and set squares The 45cm (18 inch) and 1m (39 inch) rulers are cut to allow printing on average size beds The OpenScad file allows you to make…
An EBB36 CAN bore mount for an Orbiter 2.0 in a V0, with cable relief optimised for 80mm tophats. I've remixed this from Chirpy's experimental PCB mounts - so check there if he's updated since this model was published. I've made the…
After way too long, I've finally finished the non-airsoft version of this project. Please enjoy the static prop version of the MGR-L1 Promise, MGR-A1 Vanquisher, and MGR-C1 Charger. Designed with PLA and PETG printing in mind. Supports…
„Dead flesh. Unbroken vow. The stars once bowed to him. Now he rises again – to really annoy you and make you want to throw your controller against the wall!“ This print requires some 3D printing experience. You should be familiar with…
Celebrá el legado del 10 con este cortante y sello de la camiseta de Argentina. Este modelo ha sido diseñado desde cero pensando en la precisión: las líneas del dorsal y el nombre de Messi tienen el grosor ideal para marcarse con claridad…
Yet another easy printable and usable Goggles. [Optimised for 3D Print on Transparent Film]. Goggles weight 29gram (Stripe inclusive). Speed Build Video https://youtu.be/TRsTjk00IgQ Don't forget to subscribe my Channel.…
Quick way to accurately mark the handles for drilling in Ikea PAX. Possible to print with Prusa Mini. Mark a vertical centre point on your door with erasable pencil. Align the “Beak” to the centre point. Make sure the template latches to…
Designed with the intention of being printed in steel, all initial tests were done in PETG. The primary reason is to use the CHT bimetal hardened steel nozzles from Juupine, that go into their Bambu Labs Clone. The thermistor and heater…
A 75mm deep shelf bracket designed using topology optimisation to support 25kg. Created using SolidWorks topology optimisation tool for an organic, unique look. Each bracket has been designed to hold 25kg, so for more weight add more…
Tapia - Mario. Camiseta basket.
better flow, equal length tubes. much louder than original mouthpiece.
Tuning peg for a shamisen. Print Settings Printer Brand: RepRap Printer: Wanhao Duplicator I3 Rafts: No Supports: No Resolution: .2 Infill: Any Category: Music
Keep your favorite team with you all the time with our Fifa World Cup Keychains prepared for Printing with multiple colors on the MMU upgrade or in separate parts. Dont forget to post your makes or tag us on social media at @taiced3d. We…
Got a bunch of spare ear tips kicking around you wanna keep safe? This little case will sort you out. Simple yet optimised case will keep them clean, tidy and store them safely. Also good as a transport case if you are a musician or…
I made a Peg Redesign for Better layer orientation strength & flexability. It also easier to print with and without supports. Also made connectors designs to attatch the pegs after printing to allow for better compatibility and…
An improved wall sign which allows rounded ends, the radius of which is specified as a percentage of the signs height, 100% being completely round ends, lower values allow stepped in lobes to be created. Added support for left, right or…
This was created to mount hand soap at The Little Cardboard Cafe (Melbourne) and is OpenSCAD based so easy to customize for your specific bottle It supports by default bottles up to 75mm in diameter and has a hole in the middle for easy…
High-contrast moon lamp with a 175 mm diameter, designed to fit on a Prusa Mini print bed (180 × 180 mm). It features thicker walls compared to other moon lamps of the same size, resulting in better contrast. The lamp connector plug can…
3D/BLTouch mount that uses less space than other mounts. Optimised for Satsana Fan Covers (Ender 3 V2).
Llavero de la mítica camiseta de Jordan, diseñado para impresoras con sistema multicolor
Descripción 🔑 Llavero Camiseta Personalizado en 3MF 🔑 ¡Descarga este diseño único de llavero en forma de camiseta deportiva! Ideal para fans del fútbol, regalos personalizados o souvenirs. ¡IMPORTANTE! Este diseño es multicolor, si no…
Should be printed în PETG (PLA is too britle). You can buy cheap UM2 collets pack (10 pcs - $2) here https://s.click.aliexpress.com/e/_oBiPN3h Also checkout the model with PC4-M6 Pneumatic Connector…
I really liked JJ_O's box design for CAH cards. However, his model was made for the Czech version of the game, whereas I'm using the print-at-home version, where the cards are a slightly different size. So I changed the height and with of…
Spanngummi-Bajonett-Haken für 6 mm Gummiseil längen verstellbar . Zum einhängen über kleine Schraubenköpfe o. ähnliches. Kleiner Durchmesser (Schaft ~ 4 mm) Großer Durchmesser (Kopf max. 10 mm) Es lässt sich durch seitliches…
Most files are the exact same files posted by Kallunke in his original release. The only changed parts are stand, exhaust_front and exhaust_aft. These were split into two pieces. The bottom piece prints without support, the top one needs…
As some others I spent a long time trying to find a good way for stroring resistors and found the aproach from @JohnOldman . With additional inpiration from @KWECustoms_2741705 for lager tubes fitting nicely into gridfinity units. My…
To hold the filament you can use the provided rod or an M3 bolt (≥10mm) Also checkout the model with UM2 Quick PTFE Pipe Coupling Collet https://www.printables.com/model/1133522-optimised-prusa-xl-side-filament-bypass-um2-quick
Award winning Slider Lock Latch by @MichaelQ was a necessary upgrade to replace the original flimsy locks for the enclosure hinged top lid mod. @DavidD made a slick optimized remix that simplified the print. I printed a set and it worked…
A mobile phone holder structure stiffened by various fenite elements for all smartphones. Also suitable for multi-material prints. The angle enables the fastest possible Face ID recognition (with a normal-sized table and a normal-sized…
i had tooth paine every time i came home from the shooting range because i pressed too hard down on my riffle to see clearly through the rifle optics.. so i made a smaller headrest for my big head. Print instructions Category: Parts
The main Body of the shelf is topology optimised using Creo 8. The floors of the shelf are designed to be made by hand or CNC cut.
These are the files and some photos of the monitor stand supports I designed for an Instructable which can be found here: https://www.instructables.com/Topology-Optimisation-for-Beginners-Custom-Monitor/ Supports: No Material: Black PLA…
Simple modèle permettant de tenir droit son atomiseur lors du nettoyage de la vape. Impression en 0,2mm buse de 0,4. 3 wall 10% gyroid.
The perfect sidearm for a pint sized demon hunting hero ready to face the music! RIP Goldy Pond Arc T=T Model printed on a FDM printer and assembled with superglue. Print was done in silky silver PLA and painted with a variety of browns,…
Guitar hanger - topology optimised. Printed with PETG in direction as shown on screenshot. Three wall loops, 35% infill. Works really good even with my heaviest guitars.
This creates a grassy hillock that can be used as a stand for other projects, a holder for small objects or just a piece of decor. The position, height and orientation of each blade of grass is randomised so if you create your own knoll…
The instrument used to play the shamisen.
![Flexible Goggles Optimised for 3DP [Print on Transparent Film Challenge] 7-size Covid-19](https://media.printables.com/media/prints/59044/images/618162_43d53e5e-8773-42fa-9a4f-07a80dfc051c/large_display_img_5666_59044.jpg)
