Liczymy pasujące modele…
A propeller/wing protector for the inexpensive Drone Pro/E88/E99/E58 drone. This drone is a knock-off of the toy quad-copter, the “Eachine E58”. You can easily find this USD $20 drone on marketplaces such as Temu and AliExpress. Tested…
Edit: THIS MODEL HAS BEEN MOVED FROM THIS SITE It can no only be found here: mmf.io/o/138678 --------------- This couch shaped puzzle box is a 10 piece puzzle box. It's a fairly easy print with only a few supports needed. Assembly doc and…
The original model had supports within the model data. I removed them and cleaned up the surface afterwards, so you can generate your own support by your slicer in the way you think the supports work best. Don't try to print it without…
Did the remix for both the regular and small size. I really like the functionality but the text kind of annoyed me a little as i am not a huge fan of text on my prints that isnt necessary. Other than that Martin_au did a great job…
Same enclosure, I just removed the personal logo inlay from the pieces.
hello~ It's a toy that makes a mouse come out when a cat presses a button. It works on a seesaw principle. The rats on the left and right are the same. Thank you. ps. There are contents on my blog that play with 3D printed cat toys.…
The original one is very good, but I preferred to move it on a support more towards the back of the stand so that the millennium falcon is more centered, I find it prettier visually.
Printed in matte black PLA at .1mm layer height and 15% infill.
This is a remix of the main picker part where an unwanted gap is removed / corrected and also some useful rounding corners added. One of these eliminates the need of supports there. I was printing this interesting design and discovered a…
Cuando la silicona de los cristales se estropea hay que cambiarla, pero antes hay que despegarla, lo cual no es fácil. Con este accesorio que he diseñado se quita muy bien, pero hay que tener cuidado, pues es muy puntiagudo. Para eliminar…
Empty HSW insert with top groove removed provided as Fusion 360 and STEP files for easier remixing.
The original Switch Pro controller holder by npiegdon is fantastic. See https://www.thingiverse.com/thing:3030629 for the original with logo. I decided to fill in the logo so it won't show up in the print. Nothing else has changed from…
Modified the base half of the original model to remove the center pillar. It wasn't structurally needed and created more points to mount LEDs to, because of that this project uses 162 NeoPixel LED instead of the original 156. The first…
Original model by Brass Lantern Minis. I just removed the base for anyone who likes to do their own basing.
Remix of the original to make it fit the K1 Has all the advantages of the original with improved filament path but also adds removing the cable chain as an option. The bearings used are 4mmx9mmx4mm 684ZZ type. I've added my test version…
ONLY ON MAKERWORLD NOW SORRY Link Here: https://makerworld.com/en/models/1031476-fifine-ampligame-d6-stand#profileId-1014329 Bought the FIFINE D6 Stream Dock since the official ELGATO one was out of my budget but didn't like the angle it…
UPDATE V2 I found the original version made the whole thing sit too wide. This would often get caught on the internal ‘fins’ of the original Bambu Lab AMS unit (Hydra likely ok) and would catch. Meaning it would sometimes not roll…
This is the EMF100 file from planet eclipse modified to have no feedneck option, a shorter frame, and full railing across the top. Made easy for mods. I printed my version in carbon fiber filament, Super light weight and it has lasted a…
I removed the weight slots from the gridfinity baseplate in Chrosta's gridfinty honeycomb wall mount. I will slowly make more as I require them, if you need any created put a comment, and I will make that one for you.
The original model is GORGEOUS. Very well made. However I feel like it works better as art. In my own case, my child wants this, so printed it. While removing supports one of the wings split on the weakest part, so I decided to make the…
Thanks very much to thetunebot for sharing his excellent Tin Whistle design at: https://www.thingiverse.com/thing:4943965 I experimented with thetunebot's original .stl to streamline the tube in the middle where the writing is as well as…
Printed in PETG on its side with no supports, 15% infill (prusaslicer defaults). It seems very sturdy, very well designed and prints very easily. This cleat is every bit as good as what I would expect from a store bought dock cleat. I…
I have no idea what this table of contents thing is, Printables autogenerated it and I can't get rid of it, so please ignore it. 7/3/24 I am sorry to report that due to recent fraudulent activity I have removed the matrix files until the…
The branding text on the top has been removed for ease of printing. A tool designed for the Orea Brewer - to help you shape and fit flat circular filters, conical filters, or trapezoid filters into the Orea Brewer or other flat bed coffee…
Hey Folks, If you search for an Organizer for the Gen2 Upgrade you can find the model here: As you have to remove some screws from your CoreOne during the assembly of INDX using the INDX Conversion Kit, I have made this organizer in which…
Edited out the 'book' text
This is a remixed version of the "TOOL CUP FOR AD5X" designed for enhanced mounting flexibility and a cleaner aesthetic. This holder mounts directly onto the base of the spool holders, providing a convenient and accessible spot to keep…
The original model by K2ij3 was great, but since I am using this on shelving as opposed to stacking my containers, I cut the tops and bottoms off the container and lid to reduce the size of the model and preserve shelving space. It also…
Custom 3d Printed tow hitch cover featuring an original sculpted design . THIS MODEL HAS NO "DO NOT TREAD ON ME" and is the original. Multicolor versions will be added eventually.
Its the same back cover just without logo.
I wanted a cross over that didn't have a straight through option, so trains would always cross over to the other side of the track, so I modified the original to suit my specifications. I've also applied a fix to the track to allow it to…
Exactly what it says on the tin. (ignore photos, didn't want to take cad photos. For cad photos, please refer the other)
Really liked this box but since one of these will be storing nozzles for both the MK3.9 and XL I didn't need the printer model displayed. Also wanted a version without the V6 nozzle cutout since another one of the boxes will be storing…
What I did: I removed the pins from the base plat, to be compatible with all DIY trains Also, you escalate it smaller (60% in my case) some of the parts aren't recognized by the slicer. I repaired the files with orcaslicer. Likewise, I…
Print Settings Supports: No Resolution: 0,20mm - 0.30mm Infill: 15% Filament material: PETG Nozzle: 0.4mm
A sphere with some interesting patterns on it
Hey Folks, its Upgrade time again!!!! As you have to remove some screws from your CoreOne during the assembly process to CoreOne Gen2 using the Upgrade Kit, I have made this organizer in which you can easily sort and store the removed…
I added a 45 degree sloped wall to increase thickness and increased thickness overall for durability. I noticed that the filament holder broke where the filament clips after a few cycles of clipping in and out. I replaced the circular…
parts needed to secure to printer frame: qty.2 x SHCS M3x0.5, 25mm, e.g. McMaster-Carr 91290A125 https://www.mcmaster.com/91290A125/
Esta es una versión más sencilla y flexible de mi anterior removedor de pelo https://www.printables.com/es/model/528509-limpia-pelos-ducha-shower-hair-cleaner . Recomiendo imprimir a 0,15 y 60% de relleno mínimo. This is a simpler and…
When Printing this mod I printed it in ABS and it would warp quite a bit around the top overhangs due to ABS' natural tendency to warp without proper contact from the build surface. After taking a look at the .step file in Fusion360 I…
Saw the artifact and no fix yet, so I modified the model in Fusion360 and removed the artifact. Credit to GavBro for the model.
Wanted to move the powerswitch to the left side and the power inlet + ethernet to front right side for easier acess. Re cad:ed the original side skirt with a filtered inlet and a keystone opening. Redid frontskirt based on V2.4 Z-Drive…
Remixed version of Print3d's One Line Kiss to be mounted in a shadow box or frame.
I needed the CR touch a little out of the way to fit a dual 5015 cooling duct, rotated the CR touch to be vertical.
Just print it on one side in you favourite colour or the one that match with your mouse.
Its only a slight modification to APDs version, i just wanted to keep the standard extrusion as this moved the bed too far back. This causes problems with my Y limit switch as this is as far back as i can place it without taking supports…
Drill through holes rather than modelled (to hopefully increase strength) Use m3 nylocs where possible - not heatsets Remove sensor mount
Drop-in replacement for the normal grip, if you don't want the grip shoe. I made this for when I print my own Breacher, but the fact that the original file name is “GripBody_ WithShoe ” made me think that there should be a version without…
I created this part to help our group #3DPPGH to make usable face shield kits. Having fixed the inconsistent width of the currently validated DtM v3.1 NIH model, the splatter gaurd now prints so tough that it is difficult to bend the…
removed the overhanging rabbit logo in the centre that causes print failure, also filleted the root of the arms to round them out so they'll be less prone to breaking at that point. Plus fixed the notch out of the upper arm that's in the…
same model from lithopane collecion just trimmed the custom support for easier printing!
On my Prusa i3 MK3S prints were intermittently failing during a print, reporting that the SD card had been removed. This seemed to be caused by the contacts in the printer not pressing firmly enough on the card and loosing contact with…
Version without lettering.
I removed the rear hole
remixed this bird feeder and added a bark texture to give it a natural look. I also removed the camera bracket
Removed hex pattern for faster and easies printing
10.5mm Fisheye Nikkor cap for removed hood-FX modified lens 10.5mm f2.8 Fish Eye Nikkor is one of the most used lenses for taking 360 VR panoramas in a few shots. Especially when using FX sensor cameras. In this case, you have to remove…
I created this part to help our group #3DPPGH to make usable face shield kits. Having fixed the inconsistent width of the currently validated DtM v3.1 NIH model, the splatter gaurd now prints so tough that it is difficult to bend the…
Narrower version of the original easy to open lid for the under the bed storage for the Prusa MK 3.5. Should also work for the MK 3.9 and MK 4.0. Fits the model:…
Is exactly like Lazy Rabbit without the hole on the bottom surface.
Additional insert for T100, with an empty compartment for the bottom compartment The “cables” compartment has been moved
This is part of a larger project to build an enclosure for Prusa MK4. I made this brace to put in place of moved PSU. The Brace includes a block which optionally could be used to connect electrical fork connectors and a cover which would…
Exactly the same as the original, but with the stoopid text removed. I hate when people do that...
I created this part to help our group #3DPPGH to make usable face shield kits. Having fixed the inconsistent width of the currently validated DtM v3.1 NIH model, the splatter gaurd now prints so tough that it is difficult to bend the…
I removed the screw holes on the back for easier printing
Simple remix of “KLEMCO V6 Hotend Mount Fan Duct” by Noah Works. The air outlet was moved to the center to blow air evenly on the nozzle of the hotend. Mounted on Ender 3V2 with V6 clone. Print on the side with the mounting bracket…
This is the original cockpit frame part modified to removed the roll cage.
Recommend doing a colour transition. I did mine with silver and sparkle black (as shown in photos above). Definitely makes it pop. secured mine with double sided tap. Love how neatly it stores the portafilter.
Herramienta para remover tapones de las valvulas conectoras de PTFE
The window is from https://www.otherm.cz/ company. Not sure if it fits for all their windows. Measure for yourself before printing. In the children room, I had to remove handle to open the window for safety reason. Its in the upper floor…
5in Speed Square With Corner Removed Used a Swanson speed square and “Replicated” it in tinker cad with a few modifications and designed this. Made this speed square for being able to quickly figure out if somthing is square when a weld…
adjusted the STL to remove the line in the middle
This is an edited version of the side pieces created by Sascha for their Expandable Steel Sheet Holder for Prusa Enclosure. This remix simply removes additional mounting bracket that is used to attach to the Prusa enclosure, which is…
This idea came from a pet “Poop scoop” and it's been developed for removal of hardened resin bits from the printer resin vat, without having to empty the vat, once the “stuck on” bits have been lifted from the FEP sheet. Printer settings…
After trying most if not all of the 3D printable filament clips, I stumbled across a solution that not only doesn't require any printing, it is dead easy, and just works. Simply use a 3/4 inch (19mm) binder clip with one of the handles…
Other shapes with no corner removed: https://www.printables.com/model/400610-gridfinity-push-together-baseplate-lite
Remixed Version of the 2mm case for a stronger clasp and removed GPIO Pins
A modification of the comfy earring holder by Rübenprint.
Because im using the subwoofer as part of 2.1 system where its standing vertical i had to move the hole for the terminal plate to the side of the housing. Ive also made a remix of the terminal plate for bigger binding post, see my other…
I had a continuous tapping from the Z-axis screw so wanted no material around the screw as it requires no support. I have remixed the part A8-0004 from Anet A8 acryl frame by SmallArtFly , thanks. ORIGINAL POST DATE 26-JAN-2019 Print…
Made to replace models on Thingiverse for encouraged migration to Printables. Iso version will appear normal in Thingiverse's model preview. Other version is for any other use. “Printables” Similar Font: FontsHub TT Hoves Download…
Sometimes, my palm accidentally touch on trackpad that on between each halves when I'm typing with my custom wrist rest. I couldn't reduce height of the center parts because it was too thin to do, I decided to remove center parts. It…
Internal holes removed for faster print.
AV box empty floorplate with lfoc removed in 2 positions
Check out the original model for instructions and show some love to the original creator!
Thanks @CHAOSDRUCKER for this very cool project :)!
top rib removed for shark fin clearance Category: R/C Vehicles
It screws onto the original console using a slightly longer screw.
I removed the jar threads. Everything else is the same.
I moved the heatsink over, added labels for power etc., added W.
This 3D-printable screen blanking plate is designed for the FlyingBear Ghost 6 3D printer. When using Klipper firmware , the stock display stops functioning. This plate covers the display opening, protecting the internals and giving your…
For parents that removed your handles so your child doesn't climb into the frig. These will cover the hardware sticking out so nobody will hurt themself walking by.
If you remove the spool holder of the Core One there are some holes. This plug close them. I used TPU but PETG also works.
I was taking apart my x1c for the second time when i noticed the “void” screw on the backside. Thought it was fun that I basically had a permanently decorated screw that just said void all over it. It had me wondering how many "i void…
Prusa RC3 text removed for faster printing. Saves 30 minutes on a print of four. Uploaded a stack of four. More difficult to print but on a 30x30cm print bed you can print 16 in 24 hours. Added a three pronged version. Empiricus@Dremomys…
Quick remix to fit a galaxy flip and remove the holes for the screw and charging.
remix of moved fan to the left remixed from
![REMOVED OVERHANGING RABBIT ERCF V2 ERCT [a]_BTT_MMB_Support_Arm_Endcap](https://media.printables.com/media/prints/764834/images/5957626_9cdb658f-736c-48d3-9725-0e7a2d3c3c72_9c1556f2-9fd9-4b04-af37-8359281fa7bf/screenshot-2024-02-14-at-140048.png)
