Wyniki wyszukiwania: nde

Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 1 to 12mm

Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…

Recreator 3D MK5Kit Ender3 Pultrusion Unit

Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…

Suspended Hand

I created this suspended hand artwork using bridges for the strings. You don't need any supports. It prints in 0.2mm layer height and wall generator set to Arachne in Bambu Studio. In Cura or PrusaSlicer you need to select Print Thin…

CENTER MARKER - CENTER FINDER - (Tested)

Easy to use Easy to print

Cylinder lock model

2.4 : 1 Scale Study Model of a Cylinder Lock I made this illustrative model of a keyed lock to help you understand the function of the door opening and closing mechanism. Video assembly instructions: I've always been fascinated by…

Spool Winder Remix

Updated Threaded Rod Model to remove extra shell which was causing slicing issues for some. New “v2” version will work with the original Nut but I added a v2 Nut just in case there is confusion. This is a remix of a remix of a remix. The…

Cute Pokemon Pot Plants - Pikachu, Bulbasaur, Charmander, Squirtle

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)

Cookie Cutters Reindeer

It's a pastry cutter. It's very simple. Height is 5.8 cm, width 6.0 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…

Creality Tool Case - Standard Ender Tools

A small holding case of the standard tools provided with most entry level printers (EG: Creality Ender series). Good for on-the-go storage for quick simple maintenance on most 3D printers. Side 1 holds: Clippers Screw driver 4x spare…

Under Desk Drawer

Info I designed this drawer so that it perfectly fits on my Prusa MK3S+. If it doesn't fit on your printer you can just scale it down (or up). It has a smooth sliding rail to give you perfect access to all your stuff currently lying…

Rounded Bottom Box with Lid

Box with a rounded bottom, for easier grip on small things, such as nuts or beads. Lid with a simple locking mechanism. Includes stand 3x3 and 3x4. Double size here.

Official Ender 3 V3 SE Bed level test

The original author of this test contacted Creality directly to get this bed leveling test. He also created a video testing the bed leveling and showing all the findings:

CENTER FINDER V2.0 - CENTER MARKING TOOL (Print In Place)

Easy to print - center and quarter markings 2 sizes 120 mm 150 mm I made somme adjustmets so the partial marking are now correct. I want to mention https://makerworld.com/en/@fmod for the clear explanation. You can also follow him on…

X45 Sprite CR Touch Probe Zero Y-Offset Mount v1.1 (Ender-3 S1 Pro and similar)

Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…

Duender - 2X Creality Ender-3 CoreXY convertion

OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…

X Axis Leveling Blocks Guide for Ender 3 V3 SE KE

These blocks have been designed to be used with the Ender 3 V3 SE and KE models only. Another user has verified that it will work with the KE model. The right and left side are slightly different heights as the plastic molding thickness…

Suspended Lowpoly Skull

This artistic desktop ornament features a floating skull within, thanks to the ingenious use of bridges enabled by 3D printing technology. For optimal results, it is recommended to print the piece with a layer height of 0.2 mm and with…

Ice cream handle and drip guard for kids / Eis Handgriff und Tropfschutz für Kinder

Unfortunately, it is quite difficult for small children's hands to hold and lick delicious ice cream in summer. The melting ice cream drips, sticks and the sticks are very small and difficult to hold for long periods of time. With this…

Pen Plotter for Sprite Extruder ~ Ender 3 S1

Also see our Latest Project Launching on Kickstarter 30th April 2023 https://www.kickstarter.com/projects/fizzychickens/3d-printable-antikythera-mechanism Remix of Three Ducks in a Bear Suit Pen Plotter Requires 2 x M3 Bolts (To hold Pen…

Battery Adapter From Parkside X20 to Makita 18v | extended body | Parametric | F3D

[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…

Paracord Winder

This is a remix of @IvoSlanina's great Rope Winder model. I took some material out of the centre so it prints faster, using 40% less filament. It's still very strong. I also increased the hole diameters from 4mm to 5.5mm because I…

IKEA 365+ Box 10,6 Liter - Filament Dry Box mit 2x Silica Zylinder (für PRUSAMENT 2 Rollen) mit digital Hygrometer

Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…

Suspended aquarium planter

UPDATES 02/03/2024: STEP files added The idea of this print is to have plantes suspended in the edges of the aquarium, having only the roots sumerged in the water. The model has 2 pieces, the ring that is fixed by pressure on the edge of…

Ender 3 Large ToolBox

Introducing The Large ToolBox for the Creality Ender 3. Ever wanted to stuff all of your 3D Printer's Accessories in one safe and reachable place? Well now you can! Introducing the Large ToolBox for the Creality Ender 3! Since this…

Table mount - extender - clamp

Table mount/extender/clamp Designed to expand your workplace. It can also be used as a hook. You can be sure of reliability, as one such mount can easily withstand 22 lbs or 10 kg 🏋 Printing settings ⚙ Material: PETG / ABS / ASA Layer…

Bender

Bender: Futurama: The Simpsons

Ender 3 V3 SE Lighter Fan Shrouds

3rd photo shows how it should be laid out. Takes similar inspiration from another shroud , but is designed around the shroud being remixed. Supports aren't needed, but it may look nicer if printed with ironed supports. If you're looking…

Tension Belt/Ratchet Strap Winder (Spanngurt Wickler)

Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…

Suspended Bento Solar System

UPDATE Featured on the @Prusa Blog: Prusament PLA ColorMix feature https://blog.prusa3d.com/prusament-pla-colormix-print-45-color-shades-using-just-five-filament-spools-and-more_137835/ Added .gcode and .3mf files for ColorMix. Thanks,…

Ender 3 V2 Neo Sprite Pro Fix .

For the Ender 3 V2 Neo and Sprite Pro. First print the SpriteProHouse file properly oriented or using the gcode files provided, with a printer that's working. If using PLA and the gcode files, drop the temperature to 215 and the speed to…

Creality Ender 3 dog (aka Niko the Puppy)

The Ender dog (SDcard gcode) without base or if you prefer Niko the puppy without dog house. (see the image, the Creality gcode clearly has the Makerbot imprint there so i refer to the original ) I've attached the gcode (with base) too,…

Print-in-Place Land Rover Defender

Print took around 20hrs at .16 layer height with %15 infill. The print will get stringing around the top pillars that can be removed with snips or a blow dryer. I'm really happy with the tolerances of the wheels, It doesn't have as much…

4010 fan adapter ender 3 v3 se

V2 of this project comming soon. New version of is model avaliable here. The printer get way quieter after the change, the best mod I did on my Ender 3 You will need 2 M3 screws and a 4010 fan, of course. If you like this model check out…

LZ-129 Hindenburg - scale 1/1000

famous Air Ship In my model series in 1:1000, the largest airship should not be missing. History: LZ 129 Hindenburg was a large German commercial passenger-carrying rigid airship, the lead ship of the Hindenburg class, the longest class…

Brandenburg Gate - Berlin

The Brandenburg Gate is one of the landmarks of Berlin and one of the most important symbols of Germany. It stood like no other for the division of two states and became a symbol of unity. Its history, however, dates back to the reign of…

Print-in-place cable winder "puck", no supports necessary (uses slicer trick)

Inspired by Everydecentnameistaken's cable puck from earlier today, I quickly threw together a similar puck that includes an easier to grip ... grip, and uses the one-layer-high slicer trick rectangles to print easily without supports. (…

Wandering Hour Clock

Update, 2022-01-29: David Kingsman has made a remix of this clock with a more robust drive mechanism. In a wandering hour clock, the hours themselves point to the minutes. At the top of the hour, the outgoing hour points to minute 60, and…

Reindeer napkin holder

Reindeer napkin holder for Christmas. Or why not every other time as well.

Ender 3 V3 SE webcam mount

Also required: CamScrew-10mm.stl screw made by @Vector3dArt to attach the webcam.

A box for under the Prusa i3 MK3S

This is a box that fits under the MK3S and fits in the extrusions. It takes some force to get it in but it is secure and can securely hold a lot of tools without interfering with the printer. PETG is best but PLA would probably work

PS5 Kopfhörerständer

Ein PlayStation 5 Kopfhörerständer, der mit organischen stützen gedruckt werden muss. Ich habe das ganze mit PETG gedruckt, einer 0,4mm Düse und 0,2mm layer Höhe

Pixel Watch 2 & 3 charger with cable winder and plug mount (USB-C & USB-A)

Compact pebble shaped traveling case for the Pixel Watch 2 charger, with cable winding feature and power adapter mount.

Bow Sander (Sanding Bow) with f3d file

I have a lot of 1" thick sandpaper strips for the Rockler Bow Sander. The problem is that the tension adjustment is not well thought out - it's very difficult to get good tension. I've fixed that with this design. I've attached the Fusion…

Alles gute zum Geburtstag Kuchendeckel / Torte / Cake Topper

I maked a simple cake topper for german people. Ich habe ein einfach Kuchendeckel für Deutsch Leute gemacht. Material: PLA Enjoy.

Radius finder 1-22mm (radius gauge)

Update: Version 2 uploaded. Grab files with _v2. Latches in joint were made little stronger. Arc for radius 6 (inner on ruler) made larger angle, to made it more accessible. ----- Printing tips: Print with 2 colors for better reading.…

Rose Index - Indexing fixture

This fixture is used for indexing work using a vise and square for 45, 60, and 90 degree angles. Of course this printed version is not going to be as durable or precise as the commercial metal version, but should still be useful for many…

Focusrite Scarlett 2i2 Under Desk Mount

Does not require support material Print with back face (power cord plugin area) on the print bed

Drill sharpening tool for angle grinder 125mm

With this slip-on tool you can easily sharpen you drills. it will slip-on the protector (1mm with) of your angle grinder. I printed it with PLA but i think it is better to print it with ABS. Use brim and full supports only on the bed…

Herb Grinder ROPI with Stash Chamber V2

⚠ Note: This is the second version of the ROPI grinder. It introduced the top stash chamber and major usability upgrades. If you want the latest and fully refined version with further durability, smoother grinding, and overall polish,…

Tendedero caravana / Caravan clothesline

Tendedero Caravana Tendedero que se inserta en el rail de la caravana, autocaravana o camper. Simplemente con ponerle una cuerda tienes un tendedero para cuando no tienes un árbol cerca. Impreso en Petg. Al 20%, menos la guia que tiene el…

Alexander Schleicher Ka8-b Glider

This is a detailed scale-model of the popular Ka8 Glider! Facts: Wingspan: 35cm Length: 16cm Height: ca. 5cm Update 06.03.2023 : Reworked geometry at the wings! Especially the thin areas around the trailing edge and the aileron create a…

Paper Towel Holder - Suspended

Print, assemble, screw into overhead space. Slide roll in and down once the holders are in the roll. Pull up then out to remove empty core. Print instructions Print

Guy Wire System for Spiderbeam Mast with Rope Tensioners / Winders

This Guy wire system for SOTA/POTA is a bit more than just rings for a Spiderbeam 7m mast: Its winders are also rope tensioners, like those used for tents. This makes trimming the wires easy and fast, exactly what you need on a windy…

Mini Range Finder - Disc Golf

Disc golf range finder that is a mini. I saw a range finder in the market and realized how simple the model was and so I recreated it from of that product, but I put it on a mini. I will look to add an instructional image on how to use…

Yet Another Fidget Infinity Cube Rounded - Smaller, Stronger and Tighter.

Printing Tips This model is sized for a 0.1 mm layer height anything more than that will probably fuse. The space between the model and the hinge is a single layer at 0.1 mm. If the hinges are sticking an adjustable wrench can provide…

Drill Press Center Finder

111mm X 84mm Drill Gauge: 9.00mm M3* 12mm and M3 locknut

Spool Winder Adapter for Power Drill

When dealing with lots of spools and especially with refill filaments, sooner or later you will find yourself with a tangled spool which can only be saved by respooling the filament. So I was looking for a quick and easy solution to…

Ender 3 V3 SE Heat Bed Cable Chain Mount

After creating https://www.printables.com/model/717326, I wanted the chain to have a tighter curve as I lacked space behind the printer. Then I found https://www.printables.com/model/717488 which seemingly has a tighter curve. Since I…

Boat fender floating keyring

Hollow fender that will float with one ordinary key attached. May need to be scaled up to hold multiple keys. Print upright if you want to use multiple colours and use a generous amount of supports and a nice base like in the photo or…

Child safety lock for seat belt (3 versions) // Kindersicherung für Sicherheitsgurt PKW (3 Versionen)

Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…

The Queen of the Underworld

Cable Keepers (rounded)

Since I had some trouble with my original Apple cables being incredibly fragile when bent too much, I decided to remix this. I rounded the corners to hopefully limit the stress that's put on the cables. Prints without supports. The…

pencil extender

pencil extender for slightly use Derwent and Faber castell pencils. extenders are 100m long with slot 40mm deep good for the last ⅓ of your pencils. didn't have any heavily used Derwent pencils guess I like Faber castell. step file…

Trading Card - Card Tray Commander Deck

UPDATE: New Card Stack uploaded (Update Card Stack closed) . Now little bit higher and closed walls on both sides. Updated Card Stack printed without support and much faster Finally i build a Card Tray that fits my needs. It holds up to…

Under Desk Mounting Brackets - QUBE 500

These are some bracket designs for holding a Master Cooler QUBE 500 PC case to the underside of a desk. This is ideal for people like me, who have an already cluttered standing desk and don't like cables reaching to the floor. There are…

Herb Grinder ROPI with Stash Chamber V4

🚀 The most advanced ROPI grinder yet — refined design, durable build, flawless grinding, and easy printing. ⚠ Note: This is the latest and fully refined version of the ROPI grinder. If you want the best combination of design, durability,…

PET Bottle watering spike (Supportless). Prints in under 2 hours...

Printing and adding to your used PET bottle and watering your plants is easy. Update 3/19/2022: Added file with brim for those having bed adhesion issues. Update 3/22/2022: I added a file with a brim and spike with only one hole.

Cylinder

Učebná pomôcka. Pre úsporu materiálu je 5% výplň.

Monkey Skull Chalice AI Mesh Generation + Blender Displacement How to Video

Monkey Skull Chalice. HOW TO VID.

Z Axis leveling tool (compatible Ender 3/sovol) | "Tombstone"

Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…

Drywall Stud Finder

This is a simple drywall stud finder. It uses a strong neodymium magnet to detect drywall screws which indicates possible stud locations. Move the stud finder across the wall until the center indicator starts to rattle and snaps in place,…

Pixel Watch gen 1 charger with cable winder and plug mount (USB-C & USB-A)

Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…

Cricut under-table mat holder

A quickly made holder to store Cricut cutting mats under a table surface. Holds the standard sized 36mm x 33mm mats. I'm sure there is room for improvement (especially the centre joint), so included the STEP files for you to play with.…

German power socket cover / Blende Steckdose deutsch

Contains an power socket cover blank and one with a Clip for e.g. Router power supply for german power sockets. Printing with PETG recommended due to flexibility. Enthält ein Steckdosenblanko zum selbst modifizieren und eine Clipversion…

Dispenser for folding rulers / Spender für Gliedermaßstäbe

The dispenser is printed with Prusa's clear PLA and an 0.6 mm Nozzle. I recommend supports and a layer-height of 0.30 mm

Ender 3 Magnetic Bed Aligner - Thinner

A simple remix of boodaah3d's magnetic bed aligner model but chopped down so that the edges of the aligner don't stick up past the build plate. My build plate/heated bed is almost exactly 5.5mm thick, and this model sits just flush with…

Enclosure Ikea Lack for Creality Ender 3 S1/S1 Pro

Basic parts 2× IKEA Lack table 3× Plexiglass 445×542 mm, 3 mm thickness. 2× Plexiglass 220×535 mm, 3 mm thickness. Fasteners 24× pan head screw, 5×20 mm for table legs, holder plexiglass and spool holder. 4× screw 6×50 mm, for top…

Customizable Backpack Strap Cylinder Clip

Adapt any cylinder to any strap on your backpack with this parametric design. Suggestions welcome! If you want me to include a custom size in the files, just let me know in the comments and I'll add it. What items do you want to attach to…

Under workbench C shape brackets long level holder

I needed a shelf to hold my 1m level and long ruler in the garage, so I quickly modelled these C-shape brackets to do the job. For my purpose, I used 3 of them, but more or less would work just as well. They are strong enough when printed…

Grinder/Cutoff Disc Holder (No Supports)

I couldn't find a good angle grinder disc holder that printed without supports, so I put this together. Print on the flat bottom and it should work without additional supports. Any filament will work, but I use PETG as the default for…

Ender 3 S1 - central Filament Sensor Bracket

Since I've mounted 2 spools on my printer for fast end easy change I created a model to attach the filament sensor - still flexible - in the center. If you also want a secondary spool, check out my other model:…

Stopper for leaky Markus office chair gas cylinder

Too lazy or cheap to buy a replacement gas cilinder for you Ikea Markus? Print this stopper to prevent the dreaded sag. Easy to print and in one piece for you to not waste your time. I printed in PETG to prevent warping with extensive…

Drawer Organizers for Festool SORTAINER SYS 4 TL-SORT/3, with no slip indentations!

I wanted to make some drawer organizers for the Festool Sortainer that grabbed the indentations in the bottom of the Sortainer drawers, so that when you hadn't filled the drawer, the boxes would not slide around. This also keeps them…

Voronoi Linden Leaf

Linden leaf with voronoi design. Can be used as a keychain, coaster under your cup, earrings or just as a home decoration. The leaf has a unique voronoi design similar to the drawing on living leaves. Suitable as an autumn or winter…

Fillet Radius Finder with holes

Remix of https://www.printables.com/model/280185-fillet-radius-finder-innerouter-design-reference-r , but with holes for the digits that are easier to print and easier to see, especially when using only one color.

Mini Fender for Onewheel XR

There are plenty of fenders out there for the Onewheel XR. Call them however you want – here is my version of a mini fender. Check out my Onewheel Collection – I have also designed a mini fender for the XR with WTF rails , a mini fender…

Audient Evo 4 underdesk mount

I didn't like the way the Evo4 looks if it is placed on the desk top in the intended way. Also it is hard to route the cables and to convieniently read and manipulate the controls in this orientation. So i banned it from the top of the…

Bandeja Aesthetic

increíble diseño aesthetic. Esta bandeja esta creada por la necesidad de tener un sitio a la entrada de casa para dejar objetos pequeños (llaves, monedas…) largo exterior: 122.04 mm Ancho exterior: 67.29 mm Grosor: 10.02 mm Largo…

Single dose hopper for Eureka Mignon grinders

The default hopper that comes with the Eureka Mignon grinder is quite big and badly designed for single dose grinding. This hopper fits snuggly in the enclosure. It's also one of my first prints, so any improvements are welcomed. I'll…

The best ender 3 v3 se Toolholder

This model is made to hold every single tool and item you got with the purchase of your ender 3 v3 se, but since most of us also expand our toolkits elsewhere, I wanted to make this toolholder customizable and versatile. There are premade…

Makita RT0700 Extended Circual Base

Bigger circual baseplate for Makita RT0700/RT0701 with rotation mark. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this later. Print instructions PLA Infill 25%…

Stepper motor cover axe x ender 3 v3 ke

voici le cover pour le ender 3 v3 ke faire attention le moteur de l'axe x n'est pas la meme hauteur que la ender 3 v3 se imprimer a une vitesse de 150mms avec un infil de 20% imprimer avec un support pour seulement lui de 50mm

Charmander

Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤

One Handed Book Holder

Quick and easy print, I turned off top and bottom layers so that you can see the infill, but it really doesn't matter.

MeLE Quieter3C mini PC Synta finder scope mount for astrophotography

MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…

Filament spool desiccant cylinder

I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop for each one. I…

Car Sun Visor Cover Molle / Auto Sonnenblende Molle

Printed with 0,2 mm Layers Just 70 Gramms

IQOS Heets Spender

This is a IQOS Heets Spender to organize the heets in a more beautiful way. I made a base and an extension to get more heets in one spender and print it with my Prusa. There are 2 versions. One with pentagon holes, one without. I tried…

Cute Pokemon Christmas Ornaments - Pikachu, Bulbasaur, Charmander, Squirtle

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0,2 (Recommended) Supports needed Scale it as you like :)

Blink Mini Camera Mount for Ender 3 Max Neo

I hunted at length for a mounting bracket made specifically for the Blink Mini that would mount it high enough above the bed to see the model, low enough to see the extruder nozzle, and offset far enough forward to be able to spot…