163 modeli
This is an original design for holding deburring tool on Skadis boards. It can be printed without support. It needs one T-Clip by LineArcLine to fit flush, they come in two versions - one for black/white skadis boards, one for unpainted…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
Model does not need supports. The model can be printed on a regular bed. For extra resistance against deformation, consider printing the part under the tube that inserts in the hole with solid infill. (see attached project file)
Wydruk około 1,98 €–2,42 € nettoWstępna wycena jednego wariantu
This is a box for the AnnoyingPCB as found below on Amazon. Sound is able to push through in order to keep delivering annoyances. Rough design right now can try to further refine as needed or asked. Specific Amazon listing ordered and…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
This help with storing small stuff while we are working on assembling large things!
Wydruk około 2,32 €–2,84 € nettoWstępna wycena jednego wariantu
Tip for Gardena, and similar, root watering system. Inserts into 10mm pipefitting, see reference image. Printed in PETG. The bottom of the tip should print about 10mm to fit snuggly into the pipe.
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pencil sharpener holder that prevents graphite powder from spilling when the sharpener is tilted.
Wydruk około 3,05 €–3,73 € nettoWstępna wycena jednego wariantu
Latest News: New Christmas Version! Print one of the vase option available here. Print the Christmas Lid available at this link: Santa Jack SkellingPot by Daniel Vitanza | Download free STL model | Printables.com 1. Introduction A vase, a…
Enclosure for PCBv4.xSTD for AgOpenGPS. Enclosure has 2 removable sides, PCB can be inserted from both. This version is fully 3d printable. You can choose from many face and back plates available. But F9P users can only connect antenna…
Made a pingpong trophy as a present for a company. For the crown I used the model made by: mjmedien, https://www.thingiverse.com/thing:195852 and made it so it can hold a pingpongbat at an 5 degree angle. The slot where the bat sits in is…
1. Introduction This model is a lid specifically designed for my model of vase / pot / jack-o'-lantern with the face of Jack Skellington. Check here: Jack SkellingPot by Daniel Vitanza | Download free STL model | Printables.com 2.…
This a closure that fits on to ringpull cans. I saw a similar and modeled this with Openscad and Librecad. I find it good to keep insects out of the cans.
https://aliexpress.com/item/1005003981684365.html 2024. 08. 19. Add motor_gear12-4x4 steering_gearMTZ_NEW
Enclosure for PCBv4.xSTD for AgOpenGPS. Enclosure has 2 removable sides, PCB can be inserted from both. Top side should be 100x200x2.3mm~ piece of acrylic . All connections are on front panel. Printed with PETG. Mounting ways: double…
This design handled my varied brands of pingpong paddles. When designing it was interesting to note the slight variations in paddles' backboard thickness, handle width/thickness, and curvature from handle to paddle. To accommodate for…
Ich wollte mein Nachtisch etwas geordneter haben und habe dafür ein Pad entworfen, wo die jeweiligen originalen Ladegeräte Platz finden, sowie ein simples aber wirkungsvolles Kabelmanagement integriert. Der AppleWatch-Charger muss mit…
A statue of Xi Jingping. Was took down on chinese makerworld due to … ? I did not get the point, as for me it does not seem offensive. Statues look good with matte PLA or marble PLA. Most likey as the layers are less visible.
https://thingpulse.com/product/esp32-wifi-color-display-kit-grande/?_gl=1*17h6fqa*_up*MQ..*_ga*MTUyMjg0MjY2My4xNzUyMTc1NDg4*_ga_YQQ4TG85MT*czE3NTIxNzU0ODckbzEkZzAkdDE3NTIxNzU0ODckajYwJGwwJGgw I bought this fun little kit with the…
siedzi naprawde ciesno, mozna sprobowac 105% jezeli komus to bedzie przeszkadzac. na zdjeciach model drukowany bez powiekszenia 1:1
Hracia plocha: 150 x 150 mm Hrúbka pinpongovej pálky: 6 mm Priemer trysky: 0,4 mm Výška vrstvy: 0,3 mm PLA, nožnice, sekundové lepidlo, staré poťahy Postup 1: Vytlačíme si pinpongovú pálku spolu s jednou rúčkou. Druhú časť rúčky prilepíme…
I recently bought a WalkingPad X21 treadmill which is a great product, but the minimalistic design lacks a good place to put a water bottle. I made this attachment to fit on the side of the handrail so it doesn't interfere with the LCD…
This model is compatible with the lego system.
This model is compatible with the lego system.
The enclosure from the original github was a bit too bulky for me so I made a slimmer version. The two parts lock together with some 1.7mm filament No Screws Required ! ! I Have not tested if the enclosure gets hot without active cooling…
Remodelled 1:1 from original (and tested!). The small details in this would be best fitting for Resin printing - the ones made in the cover photo were done on an Elegoo mars 2 pro using Elegoo red translucent (ABS-like).
Hilfe für Maschenproben beim Stricken. Hier können die Anzahl der Maschen auf 10cm X 10cm abgezählt werden. Grunddesign: Konstruiert mit DesignSparc V6 Verfeinerung dann mit Orcaslicer 1.6.3 Einfärben, Text und Zahlen Material: egal, was…
I printed them using ninja flex TPU on a purse mk3 S+ with a .4 nozzle, .2 layer height, 245 nozzle temp, 4 layer wall thickness, 40% grid infill on a texture steel print bed. with bed supports. with these settings I feel it came out…
This model is inspired by the very best Italian gesture, pinched fingers. I modeled the hand in DAZ studio and put it together with the plate in my favorite Fusion360. I will start printing it tomorrow and upload fotos of its soon. I cant…
Stevenson screens protect ambient sensors from direct sunlight and rain, ensuring constant airflow (based on temperature differential) to provide accurate readings. Due to how they are built, you will not be able to see the screen of your…
Manta M8P Coolingplate with 60x60 an 80x80 fan. You will need: 8x M3 Heat-Inserts 2x M3x45mm Screws 1x M3x40mm Screw 8x M3x8mm Screws 1x 60x60 fan 1x 80x80 fan
A miniature version of a Swimmingpool i created for a friend to use as a Coupon case for a new REAL Pool XD
Simple cheap foundation roller.
I designed this holder for the Remote of a Walkingpad A1 Pro. Other Walkingpads have the same remote apparently. The remote sits snug press-fitted in the holder tight enough, so that it doesn't fall out and withstands button presses. The…
Handy box for storing your squash, golf or ping pong balls. Because of its design you can have all balls stored together.
Enclosure for PCBv4.1 for AgOpenGPS. Enclosure has 2 removable sides, PCB can be inserted from both. Top side should be 100x188x2.3mm~ piece of acrylic. Printed with PETG. M3 screws 12mm x8
I designed this mountingplate for the window adapter on the exauhst of my A/C(Comfee MPPH-08CRN7), so I could screw it on to a wodden board. The plate is quite a bit larger then needed, because the hole that I sawed into the board is also…
It's scaled at 100% to match the height of other mini dudes but it should be printed at 120 (just a suggestion)
Devices which need screws in a wall to mount on, but it is difficult to place them? For small electric devices/computer accessories like home routers / gateways / CPE small network switches battery chargers Requirement to be usable, it is…
[EN] This is a coaster reminiscent of SpaceX's famous Falcon 9 landing barges. It can be made in one print while allowing the use of several colors. Printing is quick and easy. Think to print in PETG, ABS, or similar material if you want…
Bring a modern festive touch into your home with this Diamond Christmas Tree , a clean, faceted design that prints beautifully on any machine. The geometric shape creates a sparkling look under ambient light, giving it a stylish,…
with this mounts you can store up to 6 printingplates under your desktop/printertable. should fit for different brands! Just glue or screw it under your table or desktop. Dieser Druckplattenhalter fasst bis zu 6 Druckplatten unter Deinem…
If you like what I do here, come visit my Facebook group. 3D printed Grow Tools & Accesories - free .stl This one is for diy prerolls, i will add another version for use with original prerolled cones soon, stay tuned ! It's important that…
1:1 scale Kungpengopterus sculpture. There are two versions of the model, standing and posed I recommend printing this at a low layer height or with a resin printer for the best possible detail.
Well, I wanted to take out my old Burton board for a spin, but I only have NOW bindings at the moment. NOW does not sell a mounting plate for their bindings that match the old Burton 3D hole pattern. So I created one. I have Printed this…
This is a new actuator for the Crazy Dongpal Pro Lever. This isn't a crazy modification and the difference isn't huge BUT, I like the difference it made! There is an increase in the radius by 1.5mm, the bottom portion is the original…
you obviously need to print mirrored :). snugs in place like a charm!
0.2 layer height 3 wall loops (parameters) 5% infill density Gyroid infill doesn't need supports Enjoy :)
The WalkingPad is generally best controlled via the associated app. As I always watch movies on the iPad while running, I need a holder for the iPhone so that I can make changes to the WalkingPad quickly and without having to switch the…
Deprecated This is a sturdy 1U mounting panel for 10 inch server racks fits keepLiNK 8 Port 2,5-Gigabit LAN Switch. Mounts with regular M6 cage nuts. Material PETG, PLA Layer height any (I used 0.2mm) Raft nope Supports nope Infill 20%,…
I like the design of this selfie stick very much. Thank you misterjtc for sharing. I changed it a little bit so you can use M5 (cap) hex nuts and hex bolts M5x30. No glue oder solder iron required. I printed it in PLA. I had to sand the…
We upgraded to a Philips SoniCare toothbrush and after that upgraded to two of them. So we needed a place where we could put them both and charge when necessary. Have Fun!
Mini bench for your longpapes so that they are always accessible :)
Füllung 20% @Schichthöhe 0,3mm ohne Stützen, ohne Rand
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Sunlu Meta Grey PLA Overture Matte Light Gray PLA Control3d White Swap Instructions: Start with Black At layer #9…
Este soporte compacto puede contener hasta tres pelotas de pingpong. Su diseño ergonómico garantiza estabilidad y fácil acceso durante el juego, mientras que su fabricación en PLA lo hace duradero y respetuoso con el medio ambiente. Ideal…
use "voron bedpan" lower parts. i only made the bucket. Voron BedPan for Kinematic Bed Mount by TTR | Download free STL model | Printables.com im switching to beacon so the brass brush had to go. six 6mm x 3mm magnets are needed. my…
LED-PingPong Ball Video Wall inspired by bitluni's version -> https://www.youtube.com/watch?v=ikhZ34WgObc&list=WL&index=27&t=0s Thanks Bitluni! -> https://youtube.com/bitlunislab -> https://twitter.com/bitluni Using WS2811 LED chains…
adapter for 140mm fans, uses original fans screws, and M3x5x4 inserts with M3x35 screws for new fans. NOTE: for full cover you will need to bend 2 radiator's cable hooks
Qingping CO2 & Temp & RH Monitor is designed to be hanged on the wall with a provided hook. It's possible to place it on a flat surface out of the box, but then you don't have access to the USB-C port for charging and the screen may get…
Like my other Model but this times for Longpapes without Tips :D Thanks for giving your opinions and uploading your makes <3
Print in whatever material you prefer. I Printed mine in ABS as a test, 0.28mm layer height, 2 walls, 4 tops, 3 bottoms. 15% infill. I am 300lbs and these are holding up perfectly fine. I will be trying again with TPU to see if there is…
I've been looking for a Tiny Epic complete collection for sleeved cards without much success. So I decided to give Metalbag's solution on (Thingiverse) a try. While the original solution is pretty good, it appears to be designed for the…
ENG: Hello! I've designed enclosure dedicated for equipment said in title. Box and Lid should be printed using weatherproof material as PETG or ASA. Optional Seals- of course TPU. Apart from printed parts you'll need: -8(4 will be enogh…
Instead of the expensive Deutsch plug, I opted for an inexpensive Aliexpress plug that can be screwed together and also establishes a secure connection. Printed out of PETG/PETG-CF Used Components: 2x9pin Terminal block connector (…
držák pingpongovích míčků na pingpongovém stole
Walkingpad r2 cupholder, printed in 2 parts and glued together. made a version that prints the mount on the side for a stronger part I used abs and acetone to glue it
Basket for swimmingpool skimmer
Deprecated This is a sturdy 1U mounting panel for 10 inch server racks fits VIMIN 6 Port 2.5G Unmanaged Network Switch. Mounts with regular M6 cage nuts. Material PETG, PLA Layer height any (I used 0.2mm) Raft nope Supports nope Infill…
So i printed the new Nevermore V6 carbon filter and it interfered with the kinematic bedmount. The simple solution was to print a 2mm spacer which does not protrude from the 2020 profile. Print with standard Voron settings (should result…
This is my first attempt at an articulated model. I thought I'd just pick a starting shape and go with it. It prints in place, looks really good with multi-coloured filaments. No supports required. I've printed this as big as .2mm layer…
For all your bowlingpinny needs. The curves and dimensions are reworked and it is scaled down to fit in a humans ... hand. But this is pure conincidence. Instructions I printed it in in vase mode / hollow, with 4 perimeters for stability,…
This is a 'parameterized' FreeCAD model of the BearingPeg I created from the Prusa MMU2 tray bearing. This publication includes several different versions of pegs based on observations I've made and comments I've received. These were all…
A quick print for a temporary indoor or outdoor table tennis setup, the wooden plank slot is 24mm and the table slit up to 17,8mm, m8 screws clamps it to the table.
These two cases are part of my newly developed DASH printer (design soon to be uploaded). I use the MKS 1.4 controller due to its nice integration and support for 24v operation. This is the full size board, NOT the "base" version. The LCD…
A holder for the "Qingping Temp & RH Monitor (T)" which is equipped with an additional screw hole for attachments where the glue either does not stick. A large washer with an inner diameter of at least 8.2mm and an outer diameter of…
A small stand for your fishingpole(you will need a rod with a 1cm diameter)
Printed at 0.2 layer height, lay on the bed with supports (bed only, drawed just on side).
Phone stand for WalkingPad R1 and R1 PRO, made for Pixel 9 but should be compatible with other smartphones. Category: Sport & Outdoors
special thanks for RejZoR for inspiration I encountered high temperatures on my 3080ti GamePro even after replacing the paste and thermal pads. I found a RejZoR solution for mounting three 92x92x25mm fans instead of the standard ones.…
Prints at 6x6inch at 120%, Sharp Round Corners so it gonna be tight and fragile Around the Points. Havent printed this one yet but Based on how the others turned out 4-5 0ut of 10 difficulty.
Vacuum adapter for whoppingpochard 's amazing Vacuum solder stencil jig remix . This uses a cheap AliExpress motor to achieve the vacuum. The design is still untested, so proceed at your own peril. Sources for vacuum motor: AliExpress 1…
There is a 2 hold design as well if you are worried about it rotating. Holds things with a diameter up to 35mm.
Added a hole for the strap so that the remote could be worn if taken of the desk mount.
The pot is stable enouch to carry a massive rock about 5kg. The pot allows plenty of oxygen to reach the roots and it is possible to stretch wire over the surrounding eyelets. The pot has a diameter about 24cm and a heigh of 6cm. The pot…
This is (what I call) a 'leveling block' for a NGP (No Ground Plane) Side Mount Firestik CB Antenna. My truck cap (Jason brand) is angled and not straight (up) and so in order for me to mount my antenna so it is level (plumb) and not…
Allows you to mount your Qingping Air Quality Monitor against a window (using double stick tape) so you can see the readings from outside. I use this to see the readings inside my printer case when printing things like ASA. The case has…
This is my 100th model on PrusaPrinters and I thought I should make it something special. So here it is my Open Source Magnetic Multitool Bottle Opener Hex Key Holder Ringpull Assist Fridge Magnet designed around the hex key set that came…
Detailed 3D printable Donald Trump As Kingpin V2 figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
An additional plate printed in TPU to use for friction and spacig.
Für Knäufe will man TPU mit der Härte Shore 82A oder 85A. Härtere Filamente sind schwierig weich genug zu machen und weichere Filamente sind schwer zu drucken. Für das Filament will man einen direct drive Extruder, ansonsten gibt es viel…
Skadis mount for Qingping Air Monitor 2. Supporting equipment: Qingping Air Monitor 2: https://www.qingping.co/air-monitor-2/overview USB-C angle adapter: “AuviPal USB C 90 Degree Adapter” Features: Snug fit for secure mount. Air flow, no…
Photo reductions for longpass filters 50x2.5mm https://www.edmundoptics.com/p/hoya-y48-480nm-508mm-sq-25mm-thick-colored-glass-longpass-filter/46496/ Diameter 62 mm, 76 mm, 82 mm Screw M3x6mm, cut the thread with a threader
Wall mount support for the raspberry case with Pidrive. https://www.thingiverse.com/thing:1594044 I made it from stl import to sketchup !! It's not easy , it's not perfect ! but it work Print Settings Printer Brand: RepRap Printer: prusa…
