Liczymy pasujące modele…
Fixed using double-sided tape. Since it's freshly made, if any loose ends come off by chance, I plan to make improvements.
Wydruk około 3,84 €–4,70 € nettoWstępna wycena jednego wariantu
Now it is one of the most popular models. I don't know why she's not here yet. The design is not mine and belongs to the author. https://www.thingiverse.com/thing:5893530 https://www.thingiverse.com/thing:5877958…
High Poly - https://social.thangs.com/m/354094 Category: Sculptures
This is a holder for a Philips Norelco shaver / groomer. It comes with a lot of attachments, but just a bag that holds them all, so you have to dig through and find the one you need. The larger guards & blade are across the back, with the…
I wanted a case to store all the components and the power cord. Used TPU for the seal and the hinges, PLA or PETG work good for the hinges as well. (6) M3 x 20mm screws will be required.
I advise you to cut the comb into two parts and print it separately, as in the image below: After printing, you can glue it instantly with super glue. I test it using ABS and PLA to print (just 2 walls, 4 top/bottom and 15% infill). Why…
A remix of my original design from years ago Holder / Organizer for a Philips Norelco 7000 series shaver / groomer. It comes with a lot of attachments, but just a bag that holds them all and it's frustrating to dig through and find the…
I was really tired of having to sort through the included bag for specific guards, trimmer sizes, etc, so I designed a set of Gridfinity bins to simplify my life. As someone who has to shave their head frequently, this has definitely made…
Background: This projector has gone by many names over its long career. These include: “EL4000/01” “DP70” “Todd-AO Projector” “Universal 70/35” “Norelco AAII” They all refer to the same, legendary machines. With roughly 1500 produced from…
Anti-Snore Noise Clip Do NOT use if: causes snore noise, causes damaged noise, bleeding noise, runny noise, difficulty in breathing or pain what so ever. Do not use if you have a runny noise. Fit slowly and carefully stop if any issues…
This organizer is designed to fix my biggest gripe with the Philips Norelco Multigroom 3000: there is no convenient way to organize the various guards and cutting heads included with the kit! If you own one as well, you likely know the…
Case to perfectly store the Philips Norelco Multigroom Series 9000-21 - MG9510 and all accessories. The Cover must be printed with the top (Philips logo) faced down, I used supports only on the logo. Rods can be printed horizontally, but…
I liked omerdagan's original design , but had a few small issues. The slots for one of the accessories and the 1mm guard didn't quite fit, and there was no place to store the swappable trimmer head when not in use. I widened the two slots…
Created this thing because I could not find anything like it available online. A model of the original whale oil tank from Dishonored, originally made to fit a octagonal glass jar for pesto. The model is mostly accurate, but I based it on…
Sword of dishonored game
Use your charger to also hold your Philips Norelco multigroom trimmer! This was designed around the MG3740 trimmer and included A00390 charger. You can print in the default orientation, but I do recommend printing at a 45° angle instead…
This is a holder for the Philips All-in-One Trimmer 9000 series. It is designed to work with the Gridfinity system. It has storage built in for one clipper guard and the nose hair attachment. The changer can be used when the trimmer is in…
I have a Phillips Norelco Multigroom 9000 that I purchased from Costco. Unfortunately it didn't come with a nice way of storing the guards for the trimmer and I found they were always scattered all over the place. I built this to store…
This leg spreader for the RT90C tripod is designed to work in conjunction with the ZWO PE200 pier extension. It consists of two parts: the spreader and a bracket for a M10 hex bolt which prevents the bolt from spinning and allows for easy…
A smaller and slightly simplified version of this iconic video game prop, designed for easier printing. Can be fitted with a electric tealight (<41 mm) or just a LED and a button cell battery to produce a nice glow in the colour of your…
This adapter allows ZWO AM3, AM5, and AM5N mounts and pier extensions to be securely mounted on Innorel RT90C tripods. Using this adapter, the mount or pier won't spin on top of the plate. This adapter works well in conjunction with…
It's the Imperial Signet from the game dishonored.
No supports are needed. I applied small rubber pads to the bottom of the stand to prevent it from sliding around and prevent it from sitting in potential water on the vanity.
Wanted a stand for the $20 Norelco Multigroom 3000 but I only use a few attachments on the regular. This stand holds two blade guards, two trimmer heads, and the tool itself. It features drain holes in all the main cavities so water…
I bought a beard trimmer and had all the trimmer accessories placed in a clear plastic container on my counter. This organizes all my beard/nose hair/hair comb tools in one neat fashion. I have an ender 3. Printed with PLA w/15% infill.…
Gridfinity Philips Norelco Trimmer Model: MG3750/50
This is the main characters gun from dishonored 2. prints with NO supports. Check out this article about my design!…
Stand uses ABS and Foot uses TPU. If you don't want to print the feet separately, don't remove the supports.
philips norelco trimmer station remix for the 3000 series. The design is awesome, i only added a spot for my 16mm guard and a spot for the charger to sit and spool for the cord.
Mark of the outsider in a simple keyring form. Make sure the scale is right for you before printing, because I did not pay attention to what size I made it in. For single-filament printers: Use the MarkKeychain.stl and implement a…
A phillips 7000 series shaver stand. One day i'll make one with a usb magnetic charger. Till that day this will stand. This seems to be the first of its kind for this “7000 series” shaver. prior generations were “series 7000” so a little…
Someone asked me to make a whaler sword. So this is an interpretation of the sword. Warning! Results with fitment of the pins and holes may vary with you're printer. If you want the best results you should cut the full size sword…
A rectangular model of a protective case for the Philips Norelco Oneblade Nice present for someone or for yourself a handy case for your Oneblade. It fits perfectly. Lots have printed it out succesfully. Please rate the model and add a…
Supports: No Infill: 10% Rafts: Doesnt matter
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Corvo's mask from the dishonored series
Just a quick modification of the Philips Norelco OneBlade mount by likelyoperatorerror that I was already using to make it HSW compatible. I recommend printing it with tree (organic) supports for easy removal.
Philips Oneblade + Norelco Series 3000 Holder/Stand. Also slots for attachments.
Remixed to have thicker combs ( + 0.5 mm) .
Philips Norelco Trimmer Organizer for MG7900 MG7910 I just needed a place to store and organize my Philips trimmer and all the accessories. This print holds the trimmer itself and all of the guards and extra pieces. I'm also including the…
I made a nice looking stand for my shaver after being sick of having a bag of loose parts. I printed it with the top flat to not have the stairstep effect in the top. I wanted to make it so the stand could charge the shaver as well, but…
Made my own version to fit gridfinity.
Simple holder for a Philips Norelco Series 3000 Hair Trimmer. Designed to use up as little space as possible and be stored on a medicine cabinet shelf.
INSTRUCTIONS: YOU NEED A CERTAIN NUMBER OF EACH MODEL, IT HAS A NUMBER IN ITS NAME EG. 2X_Bonecharm_keychain_ring = PRINT 2 INSTANCES IF THE STL FILES DO NOT HAVE A FULL BRIM, SINK THEM A FEW mm UNDER THE PRINTBED ASSEMBLY. GLUE 2 PARTS…
This fits the Phillips Norelco 9000 Multigroom series wide T-Head trimmer but it may fit others. I've been looking for one for awhile so I decided to modify a regular head and I needed to widen some and remove other combs/fins to make it…
Couldn't find anything close either here or on Thingiverse, This is a stand I designed in Fusion 360 to hold my electric razor with a hole for the charging plug. Hole is designed to be a tight fit so it stays in place. This was designed…
Carrapax il Signore dei Mari With this model you have the possibility to make all the recolor you want, if you print it share your creation! 3d scanned model
I developed this after I did some traveling and found that my trimmer was dead - I'd bet that it activated in my luggage and drained the battery. I prefer this solution to other available prints because it allows me to keep a guard on…
Hello Everyone, I hope you are all doing well! I am happy to share with you all the complete model assembly of this sleek and compact travel case for your Philips Norelco Series 7000 and newer. This case will allow the user to store the…
Received a One Blade shaver for Christmas and was disappointed to see they dont include any sort of holder/case. Quickly made this up the following day to help keep it organized in the medicine cabinet. Pictures above it is printed in…
Holder of beard trimmer clips
Wall mount for Philips Norelco 9000 series shaver (just add one screw). Can be printed without supports in upright position (not upside down). Brim might be required if you have adhesion issues (I printed it without brim). STEP file and…
Philips OneBlade Base holder. Holds two devices, supports charging while docked, holds blades.
I had a few hours before leaving on an international trip so I designed and printed this to cover the power button. The top portion protects the blade portion and the bottom area uses a friction fit to keep it on the razor. I just did a…
Philips Norelco Vertical Charging Stand – Custom-Fit Holder Elevate your grooming setup with this sleek, 3D-printed vertical stand designed exclusively for the Philips Norelco trimmer. Engineered with precision, this stand features a…
Print in TPU and keep your elegant but poorly standing trimmer vertical. Category: Bathroom
FR 3 modèles plus ou moins sonore T1 léger T2 Moyen T3 Fort Disponible en .STl, en .STEP, et en GCODE Pour les .GCODE deux versions, une mono couleur et l'autre bicolor. Utilisez des petits objets dans la bille pour la rendre sonore…
Nobilmantis il Signore del Mare With this model you have the possibility to make all the recolor you want, if you print it share your creation! 3d scanned model
This holder/charger is designed to be used with the Philips Norelco OneBlade. The end of the charger that comes with the trimmer is secured in the holder so that when you insert the trimmer into the holder, it connects to the end of the…
See the updated model here: https://www.printables.com/model/419040-beard-trimmer-stand-2023-update Since I've bought this beard trimmer I've been frustrated that there was no stand for it (unlike other Norelco products), so I took it…
Quick remix so tires and wheels are 2 parts with the intention to print the tires in tpu and, in my case, the wheels in PETG. I have not tested yet so may need some tweaks EDIT 1 : split into two models. increased lip on wheel. made space…
I recently played through Dishonored, since Dishonored 2 is coming up. So I made a model of Slackjaw and his gangs swords. The model doesn't contain the leather work so i highly recommend doing that if you decide to print this. Category:…
signore degli anelli small books metti il segui per non perderti altri modelli
I wanted a Gridfinity all in one beard trimmer station compatible with Philips Norelco 3000 5000 and 7000. I found an existing model and added sections for a Gillette razor and my Henson razor. 3x6 Gridfinity base
I designed a simple Snorlax frame for my phone charger. The unit is designed for a large charging pad that I sourced from Amazon. If you have a different charger, I included an insert that is sized for the 56mm magnetic chargers. The…
Speaker Grille for the Norelco Phillips B5x04A B5X04A Radio Norelco, North American Philips Co. Inc.; Dobbs, build |Radiomuseum.org I used the CCTREE Dark Brown PLA filament, and it was an almost exact match for color.…
With a bright green inside insert and a dark gray external shell, the case has a two-part design. The case's exterior features a small, green connection on one side that could be latched and locking the box, as well as a textured. Visible…
wall mount needs to be screwed into the wall leave the holder on the clippers and attach the mustache to the holder
A gift for my uncle who retired this year.
🌟 Gamabunta, Signore dei Rospi 🌟 Scopri la potenza e la saggezza di Gamabunta, il leggendario rospo gigante di Naruto, simbolo di coraggio e lealtà per tutti i fan della famosissima serie. Che tu voglia decorare la tua stanza, il tuo…
The Black Numenoreans are a culture from J.R.R. Tolkien's Middle Earth, a villainous offshoot of the people of Numenor who led to the downfall of the island nation. Learning nothing from this, they continued to set themselves up as…
Tray for a Phillips Norelco 3000 trimmer. I was tired of trimmings going everywhere when I set it down so made this handy little tray to contain them. I added some little rubber feet to Elevate the design.
Requires soldering a USB-C PD (I used this one at 5V) directly to the battery terminals. The base part will provide additional support. No glue is required. Disassembly starts with crude destruction of the proprietary charging port. Then,…
Philips Norelco, Oneblade QP652070 Case which includes razer, adjustable attachment, charge stand, cable, and a two pack blades.
Fully 3D printed version. This is for the latest MegaPack R2 release (fall 2024); specifically I ordered my board on Nov 18, 2024. - Also added better 3D printed buttons - Also added some “hollow standoffs” if you don't have extras for…
Cleaning pod cover can be made from PLA or your filament of choice.
A replacement comb plate for the Philips Norelco One Blade Pro Adjustable Comb since all of the teeth on the original snapped off over time Requires no modification of the rest of the assembly Installs in a few simple steps Optimized the…
This remix aims to fix some of the geometry issues present in the OG model. Also, I included all the printing information required to print them as perfectly as possible in the 3MF files. Just switch to the appropriate nozzle you are…
IGNORE ME ROBOT - VENTURE BROS - 2 VERSIONS
Philips Norelco Wall Mount Keep your shaver neatly stored with this sleek 3D-printed wall mount for Philips Norelco razors. Designed for a secure fit and easy access, it helps declutter your space while adding a modern touch to your…
This dock attaches to the charger of the Norelco5000 shaver. It also has attachments on the side for the trimmer attachment or triple blade shaving attachment. To set up the dock, slide the transformer of the charger through the front of…
This is a replacement for the piece inside the middle lock of the tripod leg
Simple hard-sided case for the Philips Norelco Multi Groomer (MG3750/60) to prevent it turning on in your bag during travel. I designed it because mine was getting turned on accidentally when in my bathroom bag in my suitcase, draining…
Compatible with brands like Norema and Sigdal, these drawer walls are designed for effortless installation. They snap securely into place and remain firmly attached during use. They slides easily in to positioning. Can be removed without…
Stand for the Philips Norelco 5100 trimmer, available here: http://a.co/3OZYDEN It doesn't come with a stand or have one available. I attempted to incorporate the charging cable into this stand, thus the added height and hole in the…
Una creación de locura creada en un reto de diseño del club Share Horizons. El reno más loco que os podais imaginar. :D
in case you suspect the other party on a video call is in fact an AI
Enable supports for the rear mount
Elmo fantasy decorativo ispirato all’estetica epica de Il Signore degli Anelli , con linee aggressive, corna laterali curve e dettagli geometrici in stile guerriero oscuro. Il modello è pensato per stampa 3D e ideale per esposizione,…
As the Joel Bot rises it looks for new avenues to gain a foothold in our society. It has thus begun adopting likenesses of others to lull the communities into a false sense of security. Be vigilant and you can spot them. You an also hear…
Recharge stand for Philips Norelco Shaver Model 2600 series Shaver came without a charger stand. I was too cheap to buy the one with a stand. I made one. Now all I do is place it in the stand and walk away while it recharges for the next…
This is a travel guard that snaps over the trimmer's on/off button. The trimmer is really great, except when it turns on in your luggage and causes TSA to get all excited. Actually, that's never happened to me, but I have had it turn on…
Red lamp for lighting up the basket and ground underneath an Innorel RT90C during astronomy use. Uses the standard WLED Wemos D1 Mini installation: https://install.wled.me/ Parts I used: Adafruit 500c powerboost (not 500 basic) AliExpress…
Phillips Norelco 3000 holder with reinforcement and split into two interlocking pieces for printing flat
Had issues with the original model sliding around in the drawer I wanted to keep it in and didn't want any shelf liner (due to clippings getting stuck to it). I took prider's design (since I had already printed it) and made a shallow…
