911 modeli
A hydroponic growing lid designed for plant propagation, rooting cuttings, and simple water-based growing. The lid holds multiple small growing baskets above a glass, jar, or container, allowing plant stems and roots to stay supported…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu
UPDATE: Some people have had trouble with weak screws, so I've uploaded new files for the screws, made to be printed horizontally for stronger layer lines. Most printers could print the regular screws just fine, but if they seem weak…
Wydruk około 3,14 €–3,84 € nettoWstępna wycena jednego wariantu
I designed this Heart of Te Fiti for a kids theater production of Moana. It uses a LED string light with an on/off switch that I had around the house, but can also be purchased online. There's also a necklace holder the heart snaps into…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed on my Creality Ender 3 S1 with following settings: Mode: Vase mode Layer height: 0,16 mm Material: White PLA
Wydruk około 2,33 €–2,84 € nettoWstępna wycena jednego wariantu
Hello, here is a new version of my "There is a ghost in my house", to put an LED candle in it. ( https://www.prusaprinters.org/prints/30904-theres-a-ghost-in-my-house ) DO NOT put a real candle in it (unless you have very good insurance…
Wydruk około 3,56 €–4,35 € nettoWstępna wycena jednego wariantu
Simple model of a microgreens planter with various extension like a stackable holder, lid, and sprouting tray. Everything was thoroughly print-optimized. The lid can optionally be separated in slicer and has a hole - for example, use the…
Wydruk około 4,25 €–5,19 € nettoWstępna wycena jednego wariantu
A basic model for quick and repeated printing. Key attribute is the blade which has been blunted so kids can play safely. Printed on a MK3S+ at 0.2mm quality, PLA, no supports, and 15% infill.
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
This is a set of models to grow cat grass hydroponically in a standard or wide mouth canning jar. Want to keep your new cat grass upright, despite your cat's best efforts? Check out this companion print - Base for a Canning Jar…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You want to use your smartphone on a Concept2 indoor rowing machine, and not ruin your posture while doing so? Now you can! As a rowing coach I did not like it when my rowers put their smartphone on the handlemount, because it makes them…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
With the addition of the E-3D Buggy benchmark print, it only made sense to make it work with a Benchy. Now you can bring your Benchy along for the ride with your E-3D Buggy boat trailer just like Dad and Grandpa used to do. How to print:…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed without any supports and at 0.3mm layer height -draft.
Wydruk około 5,89 €–7,19 € nettoWstępna wycena jednego wariantu
This model has a cool internal design with mostly single-perimeter walls and a build-in support system for the roof based on lightning infill techniques. Have fun!!
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
This is a remix of djedje_zr7's There's A Ghost (glowing) In My House, the original requires screws and nuts. I did not have them but I had a bunch of 8mmX3mm magnets so I redesigned both pieces to use magnets instead. Six 8X3mm magnets…
Wydruk około 3,81 €–4,66 € nettoWstępna wycena jednego wariantu
We have a large glass brick window in our garage that is the first thing trick-or-treaters see as they walk up to our house. I wanted to do something with it for Halloween this year to make the house a little more festive. I remembered…
Wydruk około 2,78 €–3,39 € nettoWstępna wycena jednego wariantu
Introduction This model is a simple spin-off of my Solar System Lithophane Lamp Series . Instead of a planetary lithophane, this lamp is a simple sphere with uniform thickness. Fusion 360 Files are provided and the license is chosen such…
Wydruk około 9,79 €–11,96 € nettoWstępna wycena jednego wariantu
You need this filament to make the dinos https://www.dasfilament.de/filament-spulen/pla-1-75-mm/122/pla-filament-1-75-mm-glow-gruen-v2-800-g?c=11
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
I've printed the lithophane in orange PLA, then I bent it with an empty filament spool and a heat gun. It looks awesome in the dark with a little candle. Perfect for every entrance at Halloween because it's printed pretty fast. Print…
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
All models are designed to print without supports. You can print on smaller printers like the Prusa Mini. Everything is made to fit on an 18x18 print plate. For the tray, you can choose between a low or high version. The lower one is for…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
Idee: In unserer Dummy-Trainingsgruppe werden an einem normalen Trainingstag etwa 40 Dummys von 8 Besitzern verwendet. Am Ende werden die dann untereinander wieder getauscht. Das dauert sehr lange, daher wurde eine farbliche…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Circuit Design of crow with red LED eyes Power Supply (9V Battery) : Connect the positive terminal of the 9V battery to the positive rail of your breadboard. Connect the negative terminal of the battery to the ground rail . LDR and Base…
Wydruk około 3,96 €–4,84 € nettoWstępna wycena jednego wariantu
🏡 English below, Deutsch weiter unten 🏡 A little village full of light Inspired by ceramic Christmas houses, I designed the big house in Blender and then two smaller ones to keep it company. The roof shingles are placed slightly crooked…
Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu
A Stargate themed gear knob designed for ease of use.
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pro zapíchnutí do hlíny potřebujete vložit do malé dírky špejli nebo párátko, dle velikosti . . To stick it into the clay, you need to insert a skewer or toothpick into a small hole, depending on the size . . Sleduj mě na IG Zeman.Artist…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Part 2 of the geometric series. It will be a great addition to your desk, showing all the cool things 3D printers can do
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
This large, bright red heart-loving tow hitch cover is sure to bring a smile to anyone laying eyes on it! Help spread the LOVE ! Easily customize the tow hitch to your liking by loading the tow_hitch_heart.3mf file and replacing the heart…
Wydruk około 5,96 €–7,29 € nettoWstępna wycena jednego wariantu
The gcode file uses a 0.6mm nozzle and 0.5mm layer height.
Wydruk około 2,38 €–2,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bowindi- Perform and enjoy freedom! Ich habe heute alle Rechte bis auf “Gemeinsame Nutzung ohne NAMENSNENNUNG” freigegen! Heute Abend werde ich die besten und schösten Luftlöffelschalen ohne Gravur freigeben. Mit Hinzufügen von negativem…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please do not forget to protect the 1/4UNC mailscrew(Threadbolt?) by arming it inside with an M3x10mm (countersunk) screw. Otherwise it is easyily overturned, streched or broken. I also suggest to useUhu Plast spezial to connect pipe…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
🫧 Baby Bubble Blowing Box 🫧 Tiny box, many bubbles, endless joy! Do you also have a forgotten 5V axial fan in your workshop? Turn it into a whimsical bubble-blowing machine with this compact and clever print! The Baby Bubble Blowing Box…
Wydruk około 2,37 €–2,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
👍 Do me a big favor and hit the Like button! ✨ 🛒 Shopping List WS2812B RGB LEDs (AliExpress) Wemos D1 Mini V3.0.0 (AliExpress) Thin wire 30AWG (AliExpress) Black filament – Sunlu Black Warm white filament – eSUN White‑B Solder tin Cable…
*** You are doing me a big favor by clicking the Like button :-) *** ** Let me see what you have made. Upload a photo in Add make ** Print the letter in black or other non-translucent color. Cover plates "adfekkapje.stl" and diffuser warm…
Źródło oznaczyło ten model jako treść 18+.
Girlfriend needed a throwing knife for cosplaying so this s the result of a that Slice at 0.1mm First layer 0.3mm will give the edge a shiny surface (if you print in 2 pieces) Good scale is at 180% - scale depending on need/build size
hello friends, I'm Vlad-3d designer from Ukraine , I got this idea and I really want to implement it, first of all, this product is aimed at premium materials and I want to implement it as a final product, but I will also share the final…
This is 1:1 replica of JKR523 throwing knife. Original is full metal, but in my opinion 3d printed works just fine. Remember that throwing knives requires lot of practice to master, so don't give up after few tries.
You are doing me a big favor by clicking the Like button :-) Shopping list for use with WS2812B leds WS2812B RGB Led (AliExpress) Wemos D1 Mini V3.0.0 (AliExpress) Wire thin 28AWG (AliExpress) Black Filament - Sunlu Black Warm white…
Stormtrooper helmet towing hook cover With this you should be save not to hit anything with your towing hook, it‘s a stormtrooper what should he hit? But if you hit him with your leg, it will hurt. But anyway, it looks cool. Create your…
If you download the model, please don't forget to leave a like. Thank you! <3 Embrace the mystical allure of Umbreon with our smooth, flowing lines 3D print file. This elegant design depicts the sleek Pokémon in a series of graceful…
This is to support a strawberry plant through growth. put each half around the core plant and as the strawberries start to grow they will rest on the support instead of the ground. Keeps a lot of ground-dwelling bugs off of the fruit as…
I wanted to create something wonderful—something a little magical. And that’s how my Glowing Winter Village came to life! Snow-covered cottages, tiny fir trees, and a winding road climb the hillside, creating a little winter world. With…
Earlier this year I got into growing sprouts. While living in my dorm room at college, I wanted a more convenient way to strain the water from the mason jar and came up with this print. It's a meshed strainer lid for wide mouth or regular…
Źródło oznaczyło ten model jako treść 18+.
These are digital 3D printable models of Miniature Food from across the globe from our magic compass . This pack is part of our All-knowing Magic Compass which you can find on our website:…
These 3D models are faithful replicas of Shurikens, Ninja throwing stars, that can also be used as coasters. [ CAUTION! ] Please be careful not to injure others or yourself, as the shapes of the models are very sharp.
Use this ninja throwing knife to expand your ninja weapon collection.
knife for throwning i think that slim look better
Źródło oznaczyło ten model jako treść 18+.
*** You are doing me a big favor by clicking the Like button :-) *** This heart can be combined with the letters from my other project. https://www.prusaprinters.org/prints/109865-glowing-wled-or-led-all-alphabet-letters-and-all-n…
I was asked if I could make this: https://www.thingiverse.com/thing:1729963 as part of a gift but I wasn't sure where to get the LED module they used so I decided to remix the original model to fit some RGB LED Tealights I bought from…
Remix of https://www.printables.com/model/275117-e3dbuggy-a-3d-printer-stress-test A simple remix that brings the E3D Buggy, the Cali-trailer, and Benchy together. https://www.printables.com/model/275117-e3dbuggy-a-3d-printer-stress-test…
Satisfyingly slow flowing Marble Run to use with tree support only. Steel ball used: 8mm See Video for more details: https://www.youtube.com/watch?v=-zLj6\_tX5aY…
Fun little throwing knife. Works great with 50% infill to give it some weight. Printed at .1mm to keep the detail, but works great at .2mm. Used a few drops of CA to glue together.
I was having a lot of fun with RAWICE511's throwing card, so I thought I'd bring it to Printables! It does make a whistling/whooshing sound when thrown right, but it takes practice. Printing in PETg or ABS is recommended since it has more…
Update : Version 1, printed in PETG, broke when it sagged and the Luba backed into it. Version 2 is easier to print since most pieces lie flat, but the number of parts went up to 8. It's also slightly larger than v1 so cover the Luba a…
Capture the essence of calm and fluidity with this stunning Koi Fish Sculpture leaping from stylized waves. Perfect as a zen desk ornament, home decor piece, or a standout collectible, this model brings grace and motion into 3D form.…
Access pre-supported files & more by supporting me on Patreon!
Hi, the main goal of this project is to create a inexpressive robot for the snow with a functional plow. This is an easy to build project. You only need to know how to screw some screw and solder some wire. If you have any questions about…
Simple Kit Card with 10cm, 6cm and mixed plant and growing plugs. Print and cut off. Label your favorite plants.
WARNING: Read the entire post or your print will fail. I love this game. Very few games achieve perfection and this is one of them. I really like the way of life of the Nomai and this bust is beautiful. So I thought this print would be a…
*** You are doing me a big favor by clicking the Like button :-) *** 🔧 Project I have carefully listened to the feedback from the previous versions: 💡 Fewer LEDs than the 100 mm project 🔤 Bold, sturdy letters 🔗 Stronger links between the…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a fun throwing toy with 4…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Classic American towing truck with non hydraulic towing system with movements. You will need some kind of thread to finish the assembly. I am very thankful to Mr Benoît Lussier for his feedbacks which has helped me refine the model…
I explored many of the other designs out there and generally wasn't satisfied with what I found for my application. I wanted something that brought the filament purge waste closer to the front of the printer, while minimizing the side…
Print Settings Supports: No Layer Height: 0.2mm Infill: 15% --- Use variable layer height for best results on the blade. Finish with a black paint wash to highlight the design on the handle.
I wanted to print a large-ish Honeycomb wall on my Ankermake M5 (a 235x235 bed-slinger). Searching around, I found Honeycomb Storage Wall for 235mm^2 print bed by @sbufe which is best sized for the M5, but I also wanted borders/edges. So,…
its a star, but it doesn't shine. It hurts.
A Family Friend is an avid Rower with an Olympic rowing boat for competitions and wanted a model of his boat, so here it is. Based on the Swift Racing 111-821 mould that he owns.
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
This is a ninja throwing star. Recommended slicer settings: 0.12 mm layer resolution, 3 walls.
Hop up chamber copy of Prowin with little improvements - longer protrusion for magazine 0,5 mm longer - wall where is thread from side is 0,2mm increased because printer cant print soo thin wall -wall of main tube in front of chamber unit…
This is ment to be printed with glow in the dark filament. It can proivde more realistic look of a night sky and planets. Print instructions Use hardened steel nozzle for glowing filament. Planets: Scale it/cut it in your slicer to fit…
Sehr stabile Version eines Hydro Tower's für 6 Pflanzen pro Modul, die Module incl. Bodenplatte werden untereinander mit Edelstahl Gewindestangen M6 verschraubt um der Konstruktion noch meht stabilität zu verleihen. Als Wasserbehälter…
Ein eleganter Osterhase in einer fließenden, wellenartigen Form – ein wunderschön abstraktes und modernes Design. Das Modell lässt sich ganz nach euren Vorstellungen skalieren und kommt ganz ohne Support aus. Frohe Ostern und viel Freude…
Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high. https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all- You are doing me a big favor by clicking the Like…
Its a clasic throwing star / shuriken.
This is a dual-color model I made. It's highly versatile; you can use it as wall décor, table décor for the kids' room , or anywhere else. Use it for anything your mind can imagine. Hope you enjoy Hey everyone, first of all, it would mean…
This detailed snow-covered winter cabin brings a cozy, festive atmosphere to any space. The house features a classic log-style design with snow-laden roof details, balcony, porch, and surrounding pine trees. The interior is hollow and…
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. The throwing knife has…
A model of the Apex Legends throwing knife, made by me in Blender. There are low poly(unbeveled) versions of the model, which are my recommended method for editing the model, I.E. for a remix. There are also beveled versions, meant to be…
I split it into parts in F360 to make it printable without using AMS. I printed it out of PETG and Bambu PLA Glow Blue. Eyes, tongue painted (can be painted through AMS anyways) The glowing circles fit in the holes well without glue, but…
Its a throwing star / Shuriken with 6 prongs.
A pack of 3 types of throwing axes. I call the 3 types WoodCutterAxe, BattleAxe, and IcePickAxe.
This is a dangerous ninja star so be careful.
Inserto oficial para el juego de mesa Growing Season (creado por Eric Rodriguez https://twitter.com/EricRod_LYV ) Inserto diseñado para albergar todos los componentes de Growing Season ordenados y seguros. Con espacio suficiente para…
Its a shuriken / throwing star with 3 prongs.
Glowing Christmas Tree Print in vase mode Uses Electric Tealights Can be found here Remix of: https://www.thingiverse.com/thing:2690857/files
Welcome! After months of designing and testing, Stage one is complete, and our Smart Sprouts Indoor Growing System is ready! This is a fully 3d printed indoor solution for growing sprouts and greens. This design is hydroponic and does not…
I would recommend printing 2 of these and then using super glue to attach the two halves. I will also sometimes wind a strip of leather around the handle to give it a rap or I will tie paracord through the holes in the handle. DISCLAMER:…
This is a 2 pieces glider model. Supports: no Infill: 0% Walls: 2 Printed with 200%, both wings rotated to be printed upwards and later glued to get a 24cm wide glider, 25g weight with PLA. Thrown slightly upward inclined like shown in…
Printed using the reeltoreal.co.nz glow-in-the-dark ABS filament http://bit.ly/reeltoreal_nz Print instructions Print Settings Printer Brand: Up Printer: Up Mini Rafts: Yes Supports: Yes Resolution: 0.15mm Infill: 10% Filament: ReeltoReal…
Inspired by the effect from Disney's Haunted Mansion Ride, this head follows you as you move side to side. It's a cool effect that's pretty easy to pull off. First, print the face in a white or translucent filament. You need to be able to…
Rear Bumper Tow Towing Hook Cover Eye Caps Fit for Mazda 3 2014-2016 Text version can be modified so that you can add some text to your bumper Category: Automotive
A series of self-glowing exit and emergency signs i published on another platform a few years ago. 2 color print. Switch filament from green to self glowing for the final layers. The gcode files for Prusa i3 MK3S already have the color…
Regular print setting 0,2 layer and no supports should be ok, but feel free to experiment This thing definitley has more lift than just a stone or ball… just give it some rotation and good angle :) Disclaimer: Should fit in all cd-dvd…
Print at 100% infill or with 10+ walls to ensure strength with repeated use. Use PETG if you have it but PLA should be fine.
