Wyniki wyszukiwania: partial

Liczymy pasujące modele…

Partial Clearance Tolerance Test

A smaller clearance test with only 0.1mm and 0.15mm. Allowing you to fine tune your printer faster.

Pobrania: 144
Polubienia: 10
Ocena: 0

Partial Eclipse Phenomenon Observation Tool

During a partial solar eclipse (or the partial phases before and after a total solar eclipse) certain phenomena can be observed using this tool. Print this shape and hold it in direct sunshine where the shadow is cast onto the ground or…

Pobrania: 29
Polubienia: 3
Ocena: 5

Zamów wydruk tego modelu

Printablespermanentbrownmark

Somewhat Fixed Golf Counter (partial SCAD)

THIS HALF-BAKED REMIX HAS BEEN SUPERCEDED. USE THIS ONE INSTEAD: //////////////////////////////////////////////////////////////////////////////////////////////////////////////// This is based on Thingiverse #4867466. The original has a…

Pobrania: 20
Polubienia: 2
Ocena: 0

Zamów wydruk tego modelu

PrintablesREMLURELMI

Spinning Hexagons - partially filled

Recommended print settings: Material: PLA Layer Height: 0.20 or less Infill % : 15 Supports: No Print Orientation: Default Assembly: slide both hexagon shapes over the shaft, then slide the ring clips on to retain the pieces.

Pobrania: 8
Polubienia: 0
Ocena: 0

Zamów wydruk tego modelu

PrintablesBlated

Partial Tamper for Blated Cap & Press Core Series Capsule Filling Machine: Sizes 000-00

This is a 10-peg tamper for the Blated Cap & Press Core Series capsule filling machine. It can be used with either the 100 hole or 400 hole models. NOTE: This is for sizes 000 and size 00. Other models and sizes are coming very shortly!…

Pobrania: 0
Polubienia: 0
Ocena: 0

Zamów wydruk tego modelu

Printables

Somewhat Fixed Golf Counter (partial SCAD)

Zamów wydruk tego modelu

Printables

Partial dividers for Packout 3-drawer toolbox

[Some of the photos show the two-drawer version.] The Packout drawers have a nominal interior dimension of 16" wide by 12" deep. The long Milwaukee dividers run front-to-back, so max tool length is 12" when using dividers. These partial…

Zamów wydruk tego modelu

Printables

Partial dividers for Packout 2-drawer toolbox

The Packout drawers have a nominal interior dimension of 16" wide by 12" deep. The long Milwaukee dividers run front-to-back, so max tool length is 12" when using dividers. These partial dividers allow you to configure in multiple ways to…

Zamów wydruk tego modelu

Printables

Partial cover for the keyboard Razer BlackWidow V4 X

I recently purchased a Razer BlackWidow V4 X keyboard (not PRO) which I am extremely pleased with. However, since I am not an advanced user of all additional functions, I do not plan to use the 6 macro keys located on the left edge of the…

Zamów wydruk tego modelu

Printables

Partial Voronoi easter egg cut at an angle | Schräg geschnittenes teilweises Voronoi-Osterei

english You can scale the model as you wish, depending on what your printer can handle. I have packed 3 sizes (40, 50 and 60 mm high) into the slicer file. I printed it in PLA with a layer height of 0.2 mm. The egg with a height of 40 mm…

Zamów wydruk tego modelu

Printables

[partially deprecated] CARBON TIME cf x beam parts for voron 2.4

EDIT: I would no longer recommend the inserts provided here, I would recommend cloakedwayne's official inserts here: Better CF Tube Mounting the xy joints are still useful if you want to keep using the stock gantry, and don't want pin…

Zamów wydruk tego modelu

Printables

Frosthaven MagHex partially linked

I linked some of the parts and added modifiers to close magnet holes. Parts 14 - Front 2 linked 3 linked 4 linked 5 linked triangle (2-1) round (2-3-2) 5er (3-2) Assembly The Tile 14 can be done with: 14-front 2 times the usual A Tile 1…

Zamów wydruk tego modelu

Printables

Light switch partial baby proof.

Turn the light on and off. While keeping the toddler from smacking switches on/off with objects.

Zamów wydruk tego modelu

Printables

Snap Fit Ergonomic Enclosure for toxic gas detecting Device - Partial Diameter

Snap fit Enclosure for toxic gas detection and oxygen monitoring, while providing ease of operation and reduced installation cost. This enclosure can accommodate PCB, Sensors and Power unit. The upper cutouts on the top of the cover is…

Zamów wydruk tego modelu

Printables

3DSETS Reinforced C-HUB (Partially)

Another modification to reinforce good 3dsets models)

Zamów wydruk tego modelu

Printables

Lego Compatible (4304.dat) Plate 2 x 2 x 0.667 with Two Studs On Side and Two Raised with Partial Closed Understud

This model is compatible with the lego system.

Zamów wydruk tego modelu

Printables

New Style Sunlu Spool Adapter Set (Partial Remix)

This is a partial remix of OBA @OBA_97489 's EXCELLENT Sunlu spool adapter. I reduced the inner diameter to 45mm and added a replacement spool holder that has an Anycubic style “twist-on” mount for a snug but free fit. To keep the spool…

Zamów wydruk tego modelu

Printables

Cirkut No. 10 and No. 8 Partial Gear set

This item is compatible with both sizes No. 10 and No. 8, as well as the No. 8 outfit. You will need a 8-32 by 1-inch socket head cap screw for each gear. Gear List: 49-65 and 86-88 Updated 03.07.2025: 80-85 Updated 06.11.2025 89 - 110

Zamów wydruk tego modelu

Printables

Nemesis Lockdown Insert / Organizer - Partially Updated

Remixed parts from the Insert/Organiser designed for Nemesis Lockdown (incl. Kickstarter Stretch Goals)!

Zamów wydruk tego modelu

Printables

10 inch rack partial blanks (1/3, 2/3 and full)

Blanking plates for a 10" Rack for when you want to cover up part of 1U.

Zamów wydruk tego modelu

Printables

Grass Protection Ring for Rotary Sprinkler Head - Remixed with partial parametric dimensions

Mostly taken from jimerb's original file: https://www.printables.com/model/256225-grass-protection-ring-for-rotary-sprinkler-head Grass Protection Ring for Rotary Sprinkler Head - Remixed with partial parametric dimensions Prevents Grass…

Zamów wydruk tego modelu

Printables

Partial Scabbard for Kids' Sword Mirror remix

Love the model, my sons wanted the scabbard mirrored so they can wear a sword on each hip. Quickly mirrored the geometry, and thought I'd upload for anyone else wanting a quick download of the mirrored version. Thanks to JK for the model!

Zamów wydruk tego modelu

Printables

4x4 Gridfinity magnet base, partial borders 5x2 magnets

4x4 Gridfinity magnet base, partial borders 5x2 magnets, these are used to fill areas on the sides.

Zamów wydruk tego modelu

Printables

VMC vent for partialy blocked hole

HARDWARE REQUIRED Use heat pressed insert and M3 screw to secure the regulation knob to the air restrictor Materials Printed in PLA with gasket in TPU. Support recommended for the curve of the hull. Other Freecad files available for…

Zamów wydruk tego modelu

Printables

3D printer partial enclosure for draught reduction

You will need to purchase or cut to size 8mm thick panels and purchase suitable magnets. I bought the following for use in this project: 4x 8mm thick clear acrylic panels - cut to size 600mm x 600mm from eBay (cheaper sources exist…

Zamów wydruk tego modelu

Printables

56" US General Gridfinity Baseplates - Partial Length Drawers

Need Gridfinity in your Series 3 US General 56" top drawers? These four baseplates are sized for a snug, no-wiggle fit in the top two drawers of the Harbor Freight US General toolbox. Print the ones you need, drop them in place, and enjoy…

Zamów wydruk tego modelu

Printables

Partially Articulated Factorio Inserter

The factory must grow! A partially moving model of an inserter from the game Factorio. It can rotate and the arm can move up and down on a hinge.

Zamów wydruk tego modelu

Printables

Light Switch Partial Lockout

This is used when a plate similar to one like this is used: https://www.mcmaster.com/71695K76/ This was used for an undersink garbage disposal / dishwasher combo switch. I kept shutting off the dishwasher on accident instead of running…

Zamów wydruk tego modelu

Printables

KIA Sorento radiator grille partial pattern

The main and outer parts of the radiator grille. Main segment and corner. The distance between the segments should be approximately 4 cm vertically. The antennae from the main element may not match, as they vary along the entire radiator.

Zamów wydruk tego modelu

Printables

Partial dividers for Packout 3-drawer toolbox

Zamów wydruk tego modelu

Printables

Partial dividers for Packout 2-drawer toolbox

Zamów wydruk tego modelu

Printables

Easter Egg Trio – Embossed, Partial Cut & Full Cut

Set of three decorative Easter eggs designed for 3D printing, each featuring a different level of surface detail and cut-through pattern. Perfect for seasonal decorations, table display, or Easter baskets. Variants: Version 1 (solid, 1 mm…

Zamów wydruk tego modelu

Printables

1 inch OC703 sound panel partial Two Gang Boarder

This is a clean, no-fuss boarder for a 2 gang outlet for 1" thick Owens Corning 703 (OC703) rigid fiberglass panels—perfect for dialing in your home recording studio without overcomplicating the build. If you’re chasing tighter mixes,…

Zamów wydruk tego modelu

Printables

Airborne Fan Remote Wall Mounted Caddy (partially parametric) (Brands: Airborne|Calibo|Hampton Bay|Harbor Breeze|Home Decorators Collection)

I needed a replacement wall caddy for the ones installed in the house, as the ones that came with the fan are flimsy and too easily broken. My fan is "Airborne" brand, but the same fan is apparently also marketed under other brand names…

Zamów wydruk tego modelu

Printables

Steak Knife Block - In-Drawer (partially parametric)

We needed a knife block to sit in the drawer to organise our steak knives, and prevent them from hurting people. Partially paremetric - allows tuning of wall thickness, steak knife blade thickness and handle diameter. F3d, STEP and STLs…

Zamów wydruk tego modelu

Printables

Customizable Metric Bolt & Nut Library (M6-M20) - Standard & Partial Thread (Customize more at partforge.vercel.app)

Overview This is a comprehensive library of functional metric fasteners designed specifically for 3D printing. This collection provides ready-to-print M6 through M20 bolts and matching nuts, covering the most common mechanical needs for…

Zamów wydruk tego modelu

Printables

8 inch Vent Partial Redirector (AC / Heat Pump / Wall or Ceiling Duct)

This is a simple model made to clip on to the round cover of the wall or ceiling duct vent. In my case the diameter of that cover was 6.75", but the model should be fairly flexible to accommodate slight variations in sizes. I have two…

Zamów wydruk tego modelu

Printables

Partial PS4 DualShock 4 Controller Scan. (Main Body, L2 button and DPad)

I 3d Scan of my old broken PS4 DualShock 4's L2 trigger, D-pad, and top main body. I have not printed it yet, but please do let me know if you do. I cleaned up the main body as best I could before I stopped caring, about 3 hours in. The…

Zamów wydruk tego modelu

Printables

Better (Partially) Printed Drawers

Ive tried making printed drawers before and always ran into the same issues: They take forever if you want more than just a couple drawers Unless they're printed in vase mode they use a ton of material if they are made in vase mode then…

Zamów wydruk tego modelu

Printables

Hex nut sorter - (partial) Remix

I really like the hex nut sorter by jonafriendj (see the original model in the remix list), but I thought the cup parts could be re-designed to print faster and use less filament. The designs listed here provide substantial improvements…

Zamów wydruk tego modelu

Printables

OctoPi-Case (including SSD HD) (Partially tested)

This model is a Raspberry Pi 4 case that also enables the use of a Kingston SSD as a OctoPrint HDD/Server via USB 3.0. Fixture points for left hand side of an Ender 5 Pro. If you like this model and wish to show appreciation please…

Zamów wydruk tego modelu

Printables

Quest Pro Ears Mount (Partial light blockers)

Meta’s new Quest Pro include these “partial light blockers” for a more “immersive experience” They attach magnetically and do exactly what their name suggests… but when they’re not in use… they just lay on my desk. The other day, their…

Zamów wydruk tego modelu

Printables

Additional cover for: Philips Hue Motion Sensor Partial Cover

This is only a bigger cover for this Model: https://www.thingiverse.com/thing:3556235

Zamów wydruk tego modelu

Printables

M10 SCREW 3/4" LENGTH PARTIALLY THREADED

Normally I would print it with 40%, PLA material and at least 0.15mm quality.

Zamów wydruk tego modelu

Printables

GoPro Hero10 Bones Multiple Mounts (Vertical, Horizontal and partial cover)

This was made to help to protect your GoPro Hero10 Bones from crashes. Print it on TPU for best results. Don't forget to read the license. It's NOT for commercial use! Be adviced! Category: Hobby

Zamów wydruk tego modelu

Printables

Spirit Island Storage Insert (partial)

Partial insert option for Spirit Island base game. I kept the bottom insert and one of the top inserts. There are boxes for spirit presence, fear token, blight, fear cards/scenario reminder cards, and energy. All the boxes have 1mm and…

Zamów wydruk tego modelu

Printables

Bambu Lab X1C Partial Cover for use with AMS

Third length vented dust cover for use with the raised AMS bracket file that Bambu Lab supplies for the P1P found here https://wiki.bambulab.com/en/p1/manual/p1p-upgrades. The standoffs can be glued onto the lid and are sized for 8x3…

Zamów wydruk tego modelu

Printables

Deko Lamp Shades - Partial shade

This is one of several lamp shades I designed . All of them use the same mounting mechanism. This shade is for a “normal” LED bulb and I printed the top layers in transparent filament, so that more light shines on the ceiling. It blocks…

Zamów wydruk tego modelu

Printables

Partially 3d Printed Plane

This is a partially 3d printed plane that is designed from a plane my cousin showed me sometime last year. To understand what I was doing I reccommend watching my video about the plane… As for printing reccommendations I would go with the…

Zamów wydruk tego modelu

Printables

Partial Parametric Modular Drawer Divider

13APR2023 - updated with new connectors with better tolerance to make it easier to remove and reconfigure the setups. First set of connectors were really tight tolerances and virtually impossible to remove without breaking the divider…

Zamów wydruk tego modelu

Printables

Pocket Screwdriver Kit ( no glue / partial glue remix)

Its a remix of https://www.printables.com/model/271645-pocket-screwdriver-kit for printing without gluing the handle. It can be printed in place, and if you have OCD you have the tiny little part to glue, but doesn't affect structural…

Zamów wydruk tego modelu

Printables

Gaggiuino 3.5 inch housing and a partial conversion of a 3.5 inch HMI/TFT file

This is a TFT file created by Steve Nofs of the Facebook group that has the main screen and some other screens converted to work with 3.5 Inch Nextion Discovery LCD. Fork of project site: Open-Espresso/gaggiuino-builders: A Gaggia Classic…

Zamów wydruk tego modelu

Printables

double-breasted dovetail joint partially embedded - oboustrabbý rybinový svlak částečně zapuštěný

Double-breasted dovetail joint partially embedded, teaching aid for joiner and carpentry in secondary schools. Oboustrabbý rybinový svlak částečně zapuštěný, výuková pomůcka pro obory truhlář a tesař středních škol.

Zamów wydruk tego modelu

Printables

Short Pocket Screwdriver Kit (no glue / partial glue remix)

This is a short but still easily printable version of the original pocket screwdriver.

Zamów wydruk tego modelu

Printables

Kia partial shelf hinge

My 2nd hand 2010 Kia Venga came with a broken hinge on the partial shelf. The local dealer was expensive so i designed my own… (in mm) ((should work with any settings & nozzle equal or smaller than 0,6)) I printed in pla with 0.6 nozzle…

Zamów wydruk tego modelu

Printables

Tiny T-Rex (Partially Hollow for Balance)

This is a remix of the Tiny T-Rex made by Doodle_Monkey: http://www.thingiverse.com/thing:614067 Because of the heavy head of the original the T-Rex would tilt over to the front. I made a partially hollow version that will keep it's…

Zamów wydruk tego modelu

Printables

M365 Partial Twist Throttle

Riding my Xiaomi Mijia M365 electric scooter for longer than a few minutes quickly made my thumb a bit numb. While I am fully aware that this scooter has cruise control, I prefer having full control of the throttle at all times, so I…

Zamów wydruk tego modelu

Printables

Lamp Shade Partial Light Blocker

My floor lamp was causing a pretty glaring reflection when watching TV. This fixes that issue, while not looking too terrible. I'm not sure how common the dimensions are… Mine measured about 11.25in diameter across the top, and I didn't…

Zamów wydruk tego modelu

Printables

Partial Scabbard for Kids' Sword

A sword scabbard/frog for kids' swords. Made for a tapered sword, the top of the hole measures ~56mm x 15mm, tapered down to ~44mm x 15mm over 63mm. V1 works. The clips can do their job, but they won't hold up to kids pulling them out by…

Zamów wydruk tego modelu

Printables

Tougbook CF-54 port partial cover

If your toughbook is missing it's port cover, you are left with an ugly ridge. This model fixes that by simply screwing into the cover's original place. It makes it look (at least in my opinion) a lot more elegant if there was simply a…

Zamów wydruk tego modelu

Printables

JC-Creality rear inbetweener remix fully covered and partially covered

I cut the slots to clear drag chain bracket

Zamów wydruk tego modelu

Printables

Partial cover for the keyboard Razer BlackWidow V4 X

Zamów wydruk tego modelu

Printables

Raccoon Hummingbird (partial transformation)

The moment before the raccoon tail becomes a hummingbird and in a much more printable pose... shock + tiny hands up.

Zamów wydruk tego modelu

Printables

Italocremona Plastic City 1x2 Partial Curve Brick (Left) / Building Block

This is a replacement part for the Italocremona Plastic City set. They have been out of production for about 40 years now and can be hard to find. However, they seem to have held up well and my children enjoy playing with them as much as…

Zamów wydruk tego modelu

Printables

Italocremona Plastic City 1x2 Partial Curve Brick (Right) / Building Block

Zamów wydruk tego modelu

Printables

Predator Shuriken (Partially foldable)

This is a model of the Predator Shuriken as seen in the AVPs and the Predator. It comes in two versions - xxx_-_shuriken which is the simply closed shuriken. But it also comes in the open state where it has partially foldable blades (for…

Zamów wydruk tego modelu

Printables