Liczymy pasujące modele…
A Pendulum Wave. Beautiful to watch. See it in action in the attached video. It comes with three sets of Pendula and a pusher which slots into the base. To assemble put an end cap onto the post and then all the pendula with spacers…
Wydruk około 2,77 €–3,38 € nettoWstępna wycena jednego wariantu
This is a 3D printed pendulum clock with an 8-day runtime and an accuracy of around 1-2 minutes per week. The primary goal while designing this clock was to make it functional as an accurate time keeper. It has a deadbeat escapement which…
***MODEL WAS REUPLOADED FROM THINGIVER*** I do enjoy making 3D models that actually DO something instead of just looking nice. A weight operated pendulum clock is certainly one of my favorites. This model, one of my newer designs, not…
The goal was to create a compact, reliable, accurate and easy to build mechanical clock without any extraordinary modern or futuristic design and shape so they both look nice and have good readability as a common wall clock for your…
No parts should require supports. Screws thread into plastic. Parts required for 13 arms: 5x 250mm long M3 threaded rod 26x M3x10mm 26x M3x6mm 10x M3 Nut 26x F683zz bearing 14x MF128ZZ bearing 1x 5x5mm square tube 300mm long (I used…
Wall clock to designed for the Walnut Hallow 9-5/8" movement. All the parts are a pretty snug fit. The top and bottom are a very tight fit but mine slid together with a little assistance.
The Wall-Mountable 3D Printed Chaos Pendulum is an intricately designed, dynamic art piece that demonstrates the captivating nature of chaotic motion. This pendulum features a sturdy, lightweight frame, allowing it to be easily mounted on…
This pendulum mount was designed because my rods were larger than standard rods. I printed mine in PLA, but you can print them in whatever material you would like. PLA is surprisingly strong. I have also printed them in PETG-CF, but they…
This Chaotic Pendulum Hand Spinner is a compact, hand-held physics toy that demonstrates chaotic motion in an intuitive and playful way. By combining rotational motion with an offset pendulum mass, the spinner produces complex,…
This Chaotic Pendulum Hand Spinner is a compact, hand-held physics toy that demonstrates chaotic motion in an intuitive and playful way. By combining rotational motion with an offset pendulum mass, the spinner produces complex,…
Requirements: all files need to be printed, the inner files in black, the outher ones in white PLA flexible LED stripes which can be cut and soldered together thin wire (length depending on how high it needs to hang) for the LED stripe…
Use no supports! The arch structure should friction fit in the base. Supply your thread or string to hang the pendulum. It is fun to play with, sliding around gently on the table or desk to create patterns. Fill with sand, salt, sugar, or…
A fun, dynamic and thought provoking physics demonstration to visualize chaos and unpredictability. Even today, it is still not possible to calculate and predict movement of the two pendulums. Model is fun to play with since it…
BOTTOM LINE, UP FRONT (BLUF) The most important feature here that I haven't seen in similar models is that I put a tab on the top of of my pendula. These has two effects: You can start the motion from above You get a second visualization…
This part clamps the pendulum spring to the pendulum rod holder. Printed two of the model. Requires 4 nuts and bolts - I used #8-32 nuts and #8x1/2" screws. After installing this part, the clock has been running for 24 hours. You can read…
This is an eight day pendulum clock, so it needs winding once a week. The 2kg weight falls 1 metre to power the clock. The pendulum has a period of 1 second, so the clock ticks every half second. Detailed printing and assembly…
Maple leaf cuckoo clock pendulum with fine adjustment screw regulator. Simple assembly. Slide maple leaf on stick, screw on nut underneath maple leaf. Start with the nut around halfway up the stick, adjust up and down to regulate the…
I was really happy with my original Desktop Pendulum Wave Toy except that it doesn't take long before the pendula stop moving and you need to restart it. To fix this, I added grease to the insider of the bearings, which made performance…
Pendulum snakes are a beautiful, mesmerizing blend of art and physics. This fully 3d printed design is easy to assemble and is guaranteed to impress when you see it in action. Give it a try and let me know what you think! Printing &…
A stress relief and ceiling hook mount for hanging / pendulum lamps. I had one break on me so I designed a sturdy replacement. Print in a filament that can take prolongued stress. At least ABS, definitely no PLA or other brittle…
The model file has a thicker base so it can be translated below the bed if you want it thinner or thicker :) I'm using “ironing” on the topmost surface for a cleaner look on the letters and symbols. Advice/Beware: Stringing might occur,…
This is a low-cost ballistic pendulum demo designed for classroom use. It demonstrates momentum and energy transfer in inelastic collisions. A small projectile is launched using a rubber band-powered mechanism into a pendulum arm, which…
Hello, I have a Newtonian anti-stress pendulum for you. Special model. Suitable as a table decoration. I used PLA/PETG Basic as the material No need to use supports If you are interested in my work, the links are here:…
Pendulum snakes are a beautiful, mesmerizing blend of art and physics. This fully 3d printed design is easy to assemble and is guaranteed to impress when you see it in action. Give it a try and let me know what you think! Printing &…
This is an edit of the wonderful Digimon Pendulum COLOR Case uploaded by jyoshi1909 on Thingiverse, which itself is based on the vintage iremon cases. This version has been edited to make it easier to print on FDM printers and to improve…
Tired of your fidget spinners ? Use their bearings to build a cool double pendulum ! This contraption demonstrates the theory of chaos which can be said of a system that is extremely sensitive to initial conditions (tje wheather is a good…
Inspired by BrittLiv check on his here: https://www.instructables.com/Double-Pendulum-Fidget-Spinner/ I've designed my own using 2 cleaned from grease 607-2RS bearings and a piece of 10mm threaded rod. I will upload the design file later.…
This unique pendulum-based loudspeaker decoupling system employs suspended support stands designed to fully isolate the speaker cabinet from the table/floor. By allowing free, controlled oscillation in multiple axes, the pendulum…
1. Lore & Background for Odd-Eyes Pendulum Dragon (D&D 5e Adaptation) Name: Odd-Eyes Pendulum Dragon Type: Legendary Dragon (Celestial/Arcane Hybrid) Alignment: Chaotic Good Origin: Odd-Eyes Pendulum Dragon is said to be born from the…
A pendulum wave is an elementary physics demonstration and kinetic art comprising a number of uncoupled simple pendulums with monotonically increasing lengths. As the pendulums oscillate, they appear to produce travelling and standing…
Update: full source code now available on github https://github.com/MrBunsy/3DPrintedClocks A simple one day pendulum clock, with seconds complication. The clock is driven by a weight on a cord, with a second cord that winds up as the…
Your hangy bits fall off? Print this and annoy your neighbors once again! Has angles to help shed water, a large bottom area to smack into the chimes, and flanges on the top to help it catch air. Run a string through the middle and tie it…
A unique 3D printable creation — this Stand For Pendulum With Hook To Hang, Spiral Design Base Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested…
A unique 3D printable creation — this Stand For Pendulum With Hook To Hang, Spiral Design Base Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested…
A unique 3D printable creation — this Kinetic Wave Machine, Print in Place, 12 Pendulum Arms, Phase Offset Cam Display Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - PLY…
Are the pendulum holders you got with your lights pieces of crap? Do they cause the light to hang crooked? Did they drop your fancy and expensive decorative lightbulbs just after installation? Only me? Anyway, they function as the picture…
Pendulum is a compact table lamp built around a clean dome shade, a deep green base, and a gold silk accent that swings over the top like a suspended frame. The shape is simple, but that curved ring changes the whole silhouette and gives…
Requirements: all files need to be printed, the inner files in black, the outher ones in white PLA flexible LED stripes which can be cut and soldered together thin wire (length depending on how high it needs to hang) for the LED stripe…
General The Taurozzi engine, patented by Argentine engineer Eduardo Taurozzi in 1974, is an innovative internal combustion swing-piston engine that features a curved, toroidal cylinder and hook-shaped pistons. Designed to eliminate the…
Duration of this timer can be set by the number of steel balls, 30 seconds per ball. Only the last ball rings the bell, and the others are just ejected. You also need Steel balls (11-12mm) Steel shaft (1.5mm or around) Bell two screws (M2…
Overview This expansion pack introduces alternative pendulum weight designs for the Kinetic Spiral system. Designed for the original Kinetic Spiral Wind Chime: Different shapes create different airflow behavior, pendulum response and…
2:1 Ratio pendulum meant to work with standard bearings (skateboard). 4 parts: Wall Holder Body, Wall Holder Bearing Cap, Arm 1 and Arm 2. Category: Math
Tie a string from the loop on the crane to the pendulum piece and add magnets. I personally made all the pendulum magnets facing one polarity, and I tried several symmetric variations of polarity in the base to achieve the longest wobble…
Congratulations on the successful model "3D Printed Pendulum Clock" to the author with the mark 100 Congratulations on the successful model "Improved Wandering Hour Clock" to the author David Kingsman I tried to connect these two models…
Congratulations on the successful model "3D Printed Pendulum Clock" to the author with the mark 100 Congratulations on the successful model "Improved Wandering Hour Clock" to the author David Kingsman I tried to connect these two models…
Chaotic motion from double pendulums, https://en.wikipedia.org/wiki/Double_pendulum , why not add some chaos to the print? 5mm magnet, .step file attached for mods. Was an axe, but is now a pendulum, probably from seeing this one,…
Double pendulum desk toy Requires: 3 “skateboard” bearings printed alternatives may not work since the weight is needed
If you struggle adjusting the timing of your cuckoo clock because you cannot get precise movements of the bob, this is the thing for you. The shaft and pine cone bob are threaded (M10x1.5) and enable very precise fine-tuned adjustments.…
This is a fun double pendulum I came up with to fidget with. It gives pretty constant feedback so you can keep fidgeting with it in tons of different ways. I made this using 3 standard 608 skateboard bearings and a couple of M3 fasteners.…
The camera or iPhone is mounted on a 3-ring Universal Joint / Handle to maintain a steady field of view as you move. A weight on the bottom of the pendulum provides the torque to maintain the camera in a stable pair of axes (X and Y), but…
Ever need to put your pendulum clock in beat, well here's just the thing to help, just add this to your clock and set your beat. I used set color changes in Prusa Slicer to give a good contrast to the tick marks. Happy Printing! You can…
This pendullum consists of 7 parts, all of which can be printed in ca. 7 hours. I would recommend printing the axes and guide in a separate print. You only need two ball bearings for the print, but I recommend adding a ball bearing in the…
you will need two classic pins to assemble. put them into the holes and glue them with superglue on the side without the cap. than glue the whole thing on the pedestal. .I printed it without any rafts or supports with 15% infill and with…
The double pendulum is often used to show how chaos theory works. This is a Very simple design and easy to assemble, to hang on the wall. Although it works, since the material is very light, it stops quickly and is not as spectacular as…
This is a pendulum clock that uses a graham escapement together with a winding mechanism and a moving mechanism. To print this print all the parts and put them together from bach to front. For assembly you will need 5*2 disc magnets or…
Description This is a set of work-holding jigs for use in a bench vise. They precisely measure and hold the metal stock required to build Steve's excellent Pendulum Clock so you can cut them with a hacksaw and perform filing operations.…
This was a neat little history project on Edgar Allan Poe for my son. This model along with a few others got him first place in his class and first place overall in the History Fair at school. Everything is 3D printed except for (1) 608…
This is a pendulum, suitable for "dowsing" or any other activity, involving ideomotor response. It's quite nicely looking and responsive: just put it on the palm of your hand, ask spirits (or inner self, or whatever) and it will move.…
This is a little organizer for the boardgame Pendulum to keep the player pieces together, ready to play, and without the need for baggies. Just print 3 x Player_3 and one of the others. Let me know if you have any questions or comments.…
https://youtube.com/shorts/il82DxLyXd0?feature=share It is intended for ferrite magnets with a diameter of 20 mm. The tolerances are quite large so that the magnets can be easily removed.
My wife was bequeathed a Howard Miller Grandfather Clock and there were several problems with the pendulum... first of all, the pendulum was replaced previously and the replacement was the incorrect pendulum. It could not be made long…
Fun little desk toy, clamp it to your desk and watch the chaos unfold. You'll need some skateboard bearings for it to move smoothly.
A double pendulum of sorts, I used 3/8in steel balls to weight the ends to create better movement.
I had some extra bearings that I had purchased with the intention of using them for the Rewind Dry Box, so I made a toy using them. Rewind Dry Boxに使うつもりで購入したベアリングが余ってしまったので、これらを利用したおもちゃを作ってみました。 The "base" is held in one hand and tilted…
a cool wave pendulum. the pendulum has adjustable length and is easy to print and assemble. to start just move the base sideways in one short stroke about 5 cm or 2 inch. there are also files for wall mounting witch is easier to start and…
Nice little double pendulum/chaos pendulum fidget spinner. Redrawn from scratch in Fusion 360, based on EG3Dprinting's Double Pendulum Fidget Spinner . Fit is intentionally quite tight to reduce the need of glue, (adjustable) pliers or…
before you print, i would recommend shrinking just the length of the pendulum arms by 75% or more, as i had issues with the 2nd arm hitting my wall. this is a double pendulum that is attached to your wall. prepare: what you need is, 4 2"…
Use no supports! The arch structure should friction fit in the base. Supply your thread or string to hang the pendulum. It is fun to play with, sliding around gently on the table or desk to create patterns. Fill with sand, salt, sugar, or…
This is a kinetic art Zen garden where you hold the ball off center and release to let the ball create patterns in the sand. With a rake and hoe to smooth out your stand. I designed a spirograph ball that is all 3d printed as well as a 3d…
This is a chaos pendulum for 30mm outer and 15mm inner diameter bearrings, they are quite small, but i am looking forward, to designing one that fits standard skateboard Bearrings. Print Settings Printer Brand: Prusa Printer: I3 MK3S…
Pendulum Wave to build and play with - Watch the video to see it in action: I also have an instructable which tells you how to create/design the pendulum wave and how to build it after printing. Any questions? Let me know :)
BDUAV gimbal motor (the top one) is discontinued as far as we can tell :( Description Welcome to MotorGo. Our mission is to make advanced robotics simple and accessible to the world. As part of that mission, we are building an open source…
Saw this type of double pendulum on IMGUR or somewhere, recreated the idea here. Giving the bar a spin or holding the bar to the side and giving the ring a spin seem to be the common ways to start. Uses two 608 bearings but you can add…
I made this clock more has a proof of concept, its not meant to be a smooth mechanism or a pretty one. I tried to minimize the number of 3d printed parts as much as I could (only the gears, gear stand, clock hands and pendulum holder), so…
An easy to print chaos pendulum. The chaos pendulum is fully 3d printed. You have to print the nut twice.
Bought a pendulum clock from a car boot but it was missing 2 spindles, I modelled using existing ones from the top of the unit. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: Yes Resolution:…
Create chaotic movements by moving your finger a few centimetres back and forwards. Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: Yes Supports: No Resolution: 0.31mm Infill: 20% Notes: Higher layer height reduces the amount…
If you are sick of your Spells lasting only one turn, then try out one that is Endless! This fancy spell will slice across the battlefield in no time. The complete file does include a base, as wonderfully created and compiled by BREXIT…
its 5 five part fully printable fidget toy. I printed the top of the inner part with 100% infill. This can be done in Cura by: creating a support blocker on the front 2. making it larger to increase the volume 3. in "per model settings" →…
Just a simple pendulum arm design to mount directly to a rotary encoder or other rotating shaft. A m2 3 mm threaded insert can be used in conjunction with a m2 set screw to help secure the pendulum arm to the pivot.
This is my double pendulum fidget spinner. I made this so it would be easily held and played with in one hand. This one is based off my other double pendulum spinner, but I made it 10 mm shorter in length so now its much easier to spin in…
Update 5/3/17 : I added a base that you can place this spinner on. It lets this become more of a desk toy than a handheld toy. Since spinning the pendulum causes a lot of side-to-side momentum, I had to use weights in the bottom of the…
This is a simplified DIY version of the classic Hironbec Pendulum, a device that is designed to gatekeep birdhouses based on the weight of birds attempting to enter. This allows you to protect some vulnerable species, e.g. Tree Swallows…
This is a fun chaotic pendulum toy that demonstrates a multi-pendulum system. This can be set up as either a triple or a double pendulum. Just grab the end, give it a little shake and see the different ways the pendulum moves! Required…
A pendulum that can be used to show that the period of oscillation depends on the gravitational acceleration. A 608zz ball bearing is required for mounting. The mass piece can be filled with something heavy mid-print (in my case with…
Movement Purchase at: https://www.amazon.com/Walnut-Hollow-Pendulum-Movement-Surfaces/dp/B001O992WS?ref_=ast_sto_dp or Joann's https://www.joann.com/walnut-hollow-9.63-pendulum-clock-movement-kit/1801182.html Needs a ½" spacer between…
This work is inspired by David C. Roy. Currently, it features six pendulums, but I plan to add more in the future to enhance its mesmerizing effect. Instructions: Print all files. All of these are designed such that they no need no…
Disclaimer This is a work in progress and iterative testing is done to facilitate the design improvements to get a perfectly working escapement. Test Results and Revision History V11 - 7 July 2024 Sadly, the first test attempt(v11)…
A pendulum wave is a type of kinetic art that comes from the movement of pendulums with varying lengths. Moving them all simultaneously results in fun wave shapes as well as some groupings that seem to come out of randomness. It is a neat…
Pendulum fish feeder, needs a 6mm rod and 110mm gray pipe connector for container. Not yet printed and tested. Print instructions Category: Pets
Weight for pendulum, print, fill with sand and plug with the printed plug. It weighs about 140g fully filled with fine sand.
Here is my Spider-Man Pendulum. It is a prop I made for a future video. Print it at normal scaling. The height is about 100mm, and the width is about 60mm. It is also 10mm thick. The hand has a hole to string his web through. Print this…
Add a touch of elegance and scientific curiosity to your workspace with this beautifully crafted isochronous pendulum. Designed to swing with a consistent period, this desk toy is a perfect blend of art and physics, making it an ideal…
