Liczymy pasujące modele…
These are a set of coasters based upon the perks in Call of Duty Nazi Zombies. This is a remix of another user's set of 4 coasters that were painted to produce the color combinations. The main differences between mine and the original…
gorillatamer uploaded these Fallout Perk Pins a few years back. I downloaded them to make some for my nephew and discovered that many had errors and wouldn't slice correctly. I ran them all through Netfabb and corrected the issues. I also…
The original perks from Call of Duty zombies as plaques. Credit to Activision and Treyarch. Category: 2D Art
Downloaded from https://www.thingiverse.com/thing:2456869 (author Willem Knapen - https://www.thingiverse.com/wknapen/designs) and remixed for using on the Prusa MINI+ printer. Bylo downloadováno z…
Created 6 new perks so it now includes all perks from WaW-BO3 Perks from @spencer_dubal_212303 remains unchanged. Thanks for your work mate. New perks added: Double Tap 2.0, Widows Wine, Who's Who, Vulture Aid, Tombstone and Electric…
Description: Remix of the original perks from Call of Duty zombies as plaques. Credit to Activision and Treyarch. Printing can be done on single-color printers. Parameters: Made with an Artillery Genius pro. Layer height 0.16 PLA Filament
Today I bring you my remix of very nice jewelery box. For correct dimensions you have to print at 120%! For main parts I reccomend use 15% infill, for watch holders you can reduce infill to 8% After printing, glue the legs from the bottom…
edit - updated with the latest version (the original was a modified beta part that was missing the cable tie slots) edit 2 - I originally made this part much thicker to avoid snapping but i've been asked for a thinner version to allow the…
sick of trying to orient a round object that only goes in 1 way by holding it on the end of a wet spaghetti noodle from 4 inches away? This is the way it should have been made to begin with but 3d printing to the rescue. print in tpu…
Don't let your paintwork get stuck to the table! Don't wait forever for one side to dry - do it in a single session! “But how?” I hear you cry. Use these Perky Peaks Painting Pyramids to hold up your work. The small surface area of the…
I purchased 2 new Perky Pet 203CPBN-2 8. oz Pinch-Waist types to replace one of our same type older model feeders that had broken. We have noticed the hummingbirds seem to prefer the one older feeder over the new so I made these to…
Heyho Here I have a Holder for the Superkop portafilter & the Varia VS3 Grinder. It is made out of 2 Parts and 2 accessories. A) Holder - Simply click it into place! B) Tensioner - Tension the holder arms so the system is more stable! *C)…
This is designed to be printed without supports. Can be printed in any filament you like but I recommend PETG or ABS in preference to PLA as a bit of flexibility is nice to make it more durable. To fix this to the healight us four small…
Fallout4 stand for all 20 bobbleheads. Designed especially for the Prusa MINI+ 3D printer (or for another such small printer). “Podstavec - standardni” … can be used for any version of the figures “Podstavec - alternativni” … is intended…
Quite a while ago I designed this minimalistic portafilter holder for my Superkop espresso machine. I still use my first prototypes and they just work flawlessly. Also the machine is still superb! The holder is designed to hold your…
This model is a replacement for a Perko compartment latch handle. It was printed with PETG to resist the weather. 100% infill was used both for strength and to resist retaining water inside the part. No supports are necessary for the…
These are a few pins of the perks in Fallout 4. So far I've created Lone Wanderer, Idiot Savant, and Pain train. They are 45mm tall X 5mm thick. I designed a channel in the back to house an 18mm safety pin for attaching it to a jacket,…
A Friends Central Perk coaster design in the style of Starbucks. Test printed on Bambu A1 with AMS Lite, filament used: Elegoo Rapid White Elegoo Rapid Black Elegoo Green Commercial Rights If you wish to have commercial use rights, you…
Another model of my jewelry box - now for rings, pendants and so on. It is 25 x 16 x 2 cm, it is stackable with my special parts (https://www.prusaprinters.org/cs/prints/135871-zarazky-ke-krabickam-na-sperky). CZ: Další model do mé série…
UPDATE 2026-05-31: Fixed Nosfet version (thanks to @filamentos_1335453 in comments) Suspension adjuster for Fastace/RFloXa suspension. LeaperKim Suspension Adjustment Tool.stl - 18mm for Leaperkim (Veteran) Sherman S, Patton, Lynx,…
Die Greifer beim Melkroboter gehen ab und zu kaputt und sind sehr teuer in der Anschaffung. Deshalb ist hier mein Nachbau der Greifer zum selber drucken. Ich habe es nun mit PETG gedruckt mit 100% Füllung. Verstärktes PETG mit Carbonfaser…
Replacement top for our Perky-Pet Hummingbird feeder. Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: Yes Infill: 100% Filament: Coex PLA or PETG Red Notes: I used a support modifier in PrusaSlicer to limit the…
Get more here: https://cults3d.com/en/3d-model/art/perk-a-cola-badges
Added a cylinder in the middle for a smooth solid print instead of the raised version. MMU compatible. Printed face down on a textured print sheet. Best luck I had was to set the base default color as the colored part (extruder 2, 3, 4,…
I don't recommend this as upgrade part if old one is still in intact as stock one is in my opinion really good. Unless your planning to add upgrades to this model, like led lights or mount to theft alarm. In my case I broke it so I…
This model uses M4x8 screws, but longer screws would provide better results. The elements are initially secured with double-sided tape to prevent them from falling out, but the main load is carried by the 3D-printed part. Some adjustments…
You will need the Jewelry Shoppe tie tack with 10mm pad to glue in the holes on the back of these badges. NO PAINT REQUIRED: I have designed it so you can change the filament to each of the colors. Lemme know in comments what other badges…
The jig for marking the cutoffs for Jamie Perkin's Perfect sawhorse design Wanting to make the perfect sawhorses for your shop or for your woodworking hobby setup or your Jobsite? Well, the Perkins Builder Brothers have come up with a…
Na žádost ženy na její šperky…
We have had a Perky Pet hummingbird feeder for awhile now and the plastic parts finally broke. So I made replacement parts printing them in ABS. You need to use the old bottle for the water and the ¼ inch eye bolt and nuts for the top. so…
Simple holder for jumper cables in three lengths 90mm für F/F, 85mm für F/M und 80mm für M/M Jumperkabel. Print instructions For one Hlater always two pieces of side parts as well as three pieces of lower and three pieces of upper bracing…
A base for the DIY Perks speakers who's plans can be found at https://payhip.com/b/dhJrS I am not the designer of the speakers. I just designed the stand for it. Please DO NOT contact me asking for the model files for free. Feel free to…
We have had a perky pet hummingbird feeder for a while now the plastic parts have deteriorated and so I designed these replacement parts. You will need to reuse the bottle and eye bolt from the top of the original. I made the flowers so…
Another model of my jewelry box - now for bracelets (especially circular bracelets) and so on. It is 25 x 16 x 2 cm, it is stackable with my special parts (https://www.prusaprinters.org/cs/prints/135871-zarazky-ke-krabickam-na-sperky).…
print bottom part layed to bed on side, not on FLAT Nozzle - 0,4mm Material - PET-G 4 perimeters Seat part print from TPU rotated like tower Infill - Gyroid 15-18% 2 perimeters
A standalone case I'm using to run KlipperScreen. The advantage is in running it connected via wifi as a remote screen to control your Klipper printer, not necessarily next to the printer. Given the current Pi shortage and the fact that…
All of the Perks available from World at War to Black Ops 3 EDIT 30/04/2020: Added Double Tap 1 Perk Category: Signs & Logos
Perkeo card from Balatro The best legendary joker, obviously All credit to LocalThunk and Balatro for the design
Une petite protection d'écran pour la Patton. Créé principalement pour personnalisé la roue. A imprimer en TPU pour que les boutons fonctionnent. Deux emplacements sont extrudé en dessous pour du double-face 3M…
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Jsem výrobcem modelů a tiskárnou Ainon3Dprint Mám pro vás šperkovnici na přání mojí dcery. Byla tak hezka, ze jsem ji dal k dyspozici i Vám! Snad se někomu bude hodit.…
print bottom part layed to bed on side, not on FLAT Neodymium magnets 4 pcs: 3x10mm Nozzle - 0,4mm Material - PET-G 4 perimeters Seat part print from TPU (I made my own saddle out of synthetic leather) Infill - Gyroid 15% 3 perimeters
Stand for Lynx S with no need of lifting wheel to air... Only come to stand over ramp and it holds :) Need 8x Bolts M4x30 or longer 1mm non-slip tape on bottom
Don't carry your heavy charger, add it to your wheel! Great for long trips with lots of charging or for daily riding with quick and easy charging. Plug and play! Works to charge your wheel in-place without removing the charger or even the…
Model of my jewelry box for chains and so on. It is 25 x 16 x 2 cm, it is stackable with my special parts (https://www.prusaprinters.org/cs/prints/135871-zarazky-ke-krabickam-na-sperky). CZ: První model z mé série krabiček do toaletního…
These Lynx Buds perfectly fit your Lynx holes, like earbuds! Conveniently, they include a socket designed to hold a figurine mounted to a Lynx Buds Puck. Some example figurines from other creators are included, or use the blank puck model…
This print came about when I noticed that my cardinals had a hard time using the bird feeder, so I designed and printed 4 of these to extend the perch so the larger birds can land. Simply print and snap it onto the existing perch. Will…
The FAA says that a kite shouldn't go more than 150 feet in the air, but they don't say that it can't rocket at more than 150 mph towards the earth with a power drill. I'm uploading this here because I think it's fun, and not because I…
Petit pare-choc / béquille pour la Patton. A imprimer en TPU de préférence.
Krabička na nejrůznější šperky
Keychain inspired in juggernog perk machine from call of duty black ops 3
Break-pad sur mesure pour la Patton.
You are sneaky in pursuit of your victims. When vaulting a window, gain the undetectable status affect for 10/15/20 seconds. This perk has a cooldown time of 60 seconds. Undetectable hides the Killer's aura, Terror Radius, and Red Stain.…
This is my take on Copperkid from Silverhawks. You may need to scale this to your preferred size.
A Cheerful and Charismatic Companion Meet your new most cheerful companion, the perky little Chibi Parrot! This charming 3D-printed figurine reimagines the tropical bird as a hopelessly cute desk guardian. With its signature "chibi"…
This is a screw-in replacement for the original Hyperkin Trooper joystick handle. It is about 1cm taller than the original and slightly more narrow. The stick handle is designed to be easily printed upside-down. I recommend using a…
A set of requested perks as badges. Have yours made too! just message me on Thingiverse today! You will need some superglue and the Jewelry Shoppe Tie Tack with 10mm pads from Hobby Lobby. Category: Coins & Badges
Un petit par-choc pour protéger le phare... à imprimer en TPU.
I have the hollow version or the filled one uploaded. I used the hollow one, turned it over and filled it with plaster of paris. Afterwards I mounted it to my desk. Be aware, my speaker wood covers are 2mm each, so the base is 3-4 mm…
The original 4 perks from Call of Duty Zombies Category: Other
Klip na uzavření načatých sáčků s potravinami. Clip for closing open grocery bags.
J'ai cassé la touche ‘espace’ de ma machine Perkins en la tapant contre un mur… J'ai donc dessiné et imprimé en gris cette pièce sur ma Original Prusa MK4. J'ai imprimé en 0.10 mm (buse “de base” de 0.40 mm) afin d'obtenir un bon rendu du…
BASE cerradura tipo PERKO BASE LOCK TYPE PETG - ABS - ASA Category: Other
Nouvelle poignée avant (avec un chanfrein au niveau du dessous, plus ergonomique)
Used parameters: 0.4 mm nozzle and 60% infill
Self made cookie cutter, pepperkakeform in norwegian, of a Laban.
Just print it flat and use supports. I made 100% infill, but that is up to you. Afterwards, I sprayed it the same colour as the speaker itself and done. Looks better in my eyes and keeps the 3D model look. Use normal 5x8mm (N52 or N35 - I…
Pictured Examples printed on a BambuLab X1C (Textured PEI) Face-down Print Settings: Initial Layer Line Width: 0.4mm Wall Generator: Arachne Wall Loops: 1 Bottom Surface Pattern: Hilbert Curve Infill: 15% (Gyroid) Initial Layer Speed:…
ist ein Heimatverbundener Musiker
This cuvette holder was designed to fit in a Perkin Elmer Lambda 365 UV/Vis spectrometer for single and double light path measurements with cuvettes of variable path length of up to 100 mm. It can easily substitute the standard Single…
*This is a remix. Link to original model: https://www.thingiverse.com/thing:6851606 What was changed: Removed side “wings” to make model compatible with Sherman-P Add 4x zipties holes to bottom area - Further securing fitment. Streamlined…
Heyho This is the Superkop Espressomachine Tabletop mount without the SteelCore. It kinda worked out so I uploaded it here. (I did not manage to destroy my first prototype). But be aware that the 3D printed bracket can not be as strong as…
Perk Icons from Black Ops 4 Category: Video Games
Filter ring This is the mold for the caulk that makes the sunlight filter Filter ring pressing tool You can clamp this on top of the filter after adding the caulk to get an even top surface Control box 2 piece print. This holds the…
Pro ty, co casto nosi kolo terenem, snehem, bahnem … ostruzinim :D .. tak proste proto, ze je sedlovka zespodu dost neergonomicka a tlaci do ramene. dve poloviny je mozne slepit, ale neni to nutne, doporucuju nalepit treba 10mm silny mech…
A great 3D model of a Super-kart you can use this for a great decoration/model or take it to the next level with remote control. Don't forget to like this if you enjoy the model!
First own designed Case, not Perfekt but it works. Printed/desined Year ago The lid is attached with screws for easy access to the lamp. The rest is glued Case for
This extender cover is designed for the use of custom or long-neck cuvettes in the sample holder of a Perkin Elmer Lambda 365 UV/Vis spectrometer. It replaces the original lid and has overlapping sides so that no light is scattered from…
Här är en hållare för markiser från Perkis. Stödbenen klickar fast ordentligt. Den är inte 100% referens mod originalet, men fungerar perfekt. Jag tillverkade dessa och printade då en av mina stödbenshållare gick av.
3d scan of my Leeperkim Oryx. This to be imported into CAD and used to design other accessories and parts.
The Allstar SZD-54 Perkoz is a detailed scale model of a real civilian aircraft, made for display and diorama purposes. This model is ideal for aviation enthusiasts, collectors, and hobbyists looking to enhance their tabletop displays or…
I really didn't like the stock headlight on the lynx-s because with any kind of pedal softness it would just point at the ground 5ft in front of me when accelerating and the cutoff beam pattern was not very good. These spacers allow for…
The original (which at times were near $50) wear out within a couple years. This model replaces these worn parts. Disassembly is easy with 4 screws, the original will pop right out and these can bend into place without much effort. I…
a spare part for a board game
This wallmount is for the Hyperkin GN6 Controller which is a 3rd party controller, designed for use with the MegaDrive or Genesis. See my design list for wallmounts for other controllers Cable area behind the controller. You can either…
I designed 3D printable inserts for Perky boxes. They fit the standard 1.25" x 1.25" x 1.25" (3.17 cm x 3.17 cm x 3.17 cm) Perky box extensively used for storage of thumbnail mineral specimen. The files include the standard plain insert…
This adapter can be used to fit a Kessil PR160L LED lamp into a PerkinElmer FL6500 fluorescence spectrometer. I've built it for the long-time irradiation of a sample in solution in a cuvette. The cuvette holder needs to be printed as well…
Just print it flat and use supports. I made 100% infill, but that is up to you. Afterwards, I sprayed it the same colour as the speaker itself and done. Looks better in my eyes and keeps the 3D model look. Use normal 5x8mm (N52 or N35 - I…
Petit pare-choc / béquille pour la Patton. A imprimer en TPU de préférence.
We have had a Perky Pet hummingbird feeder for awhile now and the plastic parts finally broke. So I made replacement parts printing them in ABS. You need to use the old bottle for the water and the ¼ inch eye bolt and nuts for the top. so…
A great 3D model of a Super-kart you can use this for a great decoration/model or take it to the next level with remote control. Don't forget to like this if you enjoy the model!
This is my take on Copperkid from Silverhawks. You may need to scale this to your preferred size.
print bottom part layed to bed on side, not on FLAT Nozzle - 0,4mm Material - PET-G 4 perimeters Seat part print from TPU rotated like tower Infill - Gyroid 15-18% 2 perimeters
