Liczymy pasujące modele…
I went to replace the flap on my PetSafe Freedom Large doggy door, and the plastic at the top of the flap that the screws drive into was cracked in several places. I just whipped this together as a quick replacement after not finding it…
This tunnel extension overlaps by approx. 10mm with the existing tunnel. The .stl files are named after the length extension, e.g.: “Petsafe tunnel 15mm” makes your tunnel 15mm longer, and is 25mm high. If you need a value in between,…
This is a 2-way splitter for the Petsafe Smart Feed Automatic Feeder. It will allow you to use two separate bowls with the feeder to encourage sharing . There is a printed part that can be bought for this purpose on Amazon, but I wanted…
Single food chute for the PetSafe Smart Feed Automatic Pet Feeder. I was using the original splitter version of this with two chutes, and that works great for two bowls of food. Unfortunately we are now down to one cat, so I remixed the…
For the PetSafe 4 Way Locking Cat Flap PPA19-16732 / Staywell deluxe 300 . Needed a long tunnel for the cat door, it's a snug fit and no glue needed. The end plug are for close the door from outside as well (for winter in our summer…
The cat door did not come with anything to cover the space between the front and back pieces, leaving an ugly view of my hollow door. It is sized for a 22mm gap, the parametric model is included so you can resize or remix. The flat brim…
There are two parts inside the PetSafe automatic feeder that wear out or break. One is the agitator that helps pet food move into the hopper and the other is the small arm that attaches it to the gear mechanism. I was able to measure and…
Door replacement for Petsafe Staywell Séries 300, 400, 500. Print in clear PETG 70% infill. Category: Pets
Flap bracket for PetSafe medium dog door. I modeled this by request, was told it printed, fit, and works well. They used #6–32 x 3/16″ screws to attach.
This is a bowl holder for the PetSafe Healthy Pet Simply Feed Automatic Cat Feeder for Cats and Dogs, model PFD00-14574. The stock one cracks easily when someone kicks it. This fits into the slot available for the stock one, but only…
This is a spacer for a Petsafe microchip cat door (model PPA19-16145) to allow a more polished looking installation in materials that are thinner than a standard door. Not very much structure is required, but a full width version is also…
PetSafe healthy pet simply feed automatic feeder: with these parts, you can modify the feeder so that each portion dispensed is only around 1 Tbsp (1/16 cup) instead of the default 1/8 cup. This is great for cats who have troubles…
Parts to make a litter box guard for the PetSafe brand Simply clean litter box. I used a thin plastic intended for use cutting boards of the guard and use these printable pieces to hold in a round shape. They have small interlocking tabs…
A replacement battery cover for the PetSafe Stubborn collars. STEP file included.
Pay attention to print setup (see the screenshot), as the mesh is created by slicer and not modeled in CAD. Please use food-contact certified filament. I'm using Fillamentum CPE HG100 Natural (clear), but there are many alternatives. The…
Update 11-13-25: Added a super long handle variant that makes the handle go as long as the prusa XL build plate. A printed door replacement for the Petsafe door system, but with a pin retention like the old door model and a handle for…
I kept going thru dog doors because the hinge is very weak so I decided to print a new hinge. This is for there larger door I have included a pic of the old hinge and new.
Replacement legs for PetSafe's Drinkwell 360 fountain. I couldn't find a model that has the channel for the pump wire, so I created my own. Print in your favorite filament. Orient it on its side and use supports. I used IIIDMax PLA+ at…
You will need 7 feet for 1 litter box. This will raise your box off the floor a bit to help the main bowl sping more freely. I used TPU since I have hard floors, but PLA would work fine especially if you have a rug or carpet underneath.
Upgraded to a “Smart” dog door, but the rfid tags that come with it were hanging too low off my dog's collar and not registering to unlock the door. made these holders out of TPU to keep them close to the collar to insure they register…
Pay attention to print setup (see the screenshot), as the mesh is created by slicer and not modeled in CAD. NB: There is a tiny nub modeled in drinkwellplatinum_ezbox_up.3mf – make sure the nub is on the up side. You might need to turn…
“Carpet” version is meant to go under an appliance/furniture so it will stay. I'll make a version with no foot and with countersunk holes to attach it to a flat surface. Designed to fit the door blocker which measures 145mm wide and 15mm…
PetSafe Auslauf für den Trink Wasserbrunnen für Katzen
The agitation arm in our feeder kept jamming and broke. I designed this arm as a replacement. The arm is designed to eliminate the space that seemed to cause the jams, and to print on its side to maximize the strength. I printed int in…
PetSafe Flap Hinge Replacement (Only for Panel Door Version) This project was not about saving money but rather me forcing myself to do something that I could design and not have to wait on shipping. This item is only for use with the…
Replacement cover for the PetSafe Petporte, without the battery cover, but instead more space on the inside.
Two simple boxes to make it convenient to store Petsafe bark collars : PetSafe citronella collar, charge cable & (up to 4) spare cartridges. This is for the model that uses citronella cartidges. OR PetSafe rechargeable bark collar &…
Pay attention to print setup (see the screenshot), as the mesh is created by slicer and not modeled in CAD. Please use food-contact certified filament. I'm using Fillamentum CPE HG100 Natural (clear), but there are many alternatives. The…
Clip to block the spring of the PetSafe Silent cat door. The spring lock mecanism was annoying, this simple clip solves it.
I love my PetSafe Healthy Pet Water Station but my 2 spaniels always had dripping wet ears due to the bowls width. These guards allow the dogs to drink while keeping their ears dry. I've included the Fusion360 model so that you can adjust…
Box with a main body and a lid offers enough space for placing the PetSafe key. For the best fit remove the original ring carefully from key using grinder. PETG recommended. Fasten the lid with four wood screw 1,5 x 8 mm firmly. Choose…
New and improved version! Fully enclosed bowl holders with additional left and right base inserts. The new base also prevents food from getting under the bowls. Extended the bowl location further away from the feeder. Included a printable…
The PetSafe Scoopfree Clumping sometimes gets jammed with clay (or other things). Then clay is getting caught between rake and rear wall, after the rake returns into starting In this case it makes sense to clean up the rake. So i created…
Extend the maximum delay time to be set to up to 47 hours in advance. Replaces the existing dial. Prints without supports tested in PETG at 10% infill, 2 top & bottom, 2 side Requires: 1x 30mm M3 bolt (Must be threaded the whole way) 1x…
This custom scooper is designed specifically for the PetSafe crystal litter box system. The scoop geometry is tailored to fit directly into the narrow waste collection valley where the automatic rake deposits cat droppings, allowing users…
The Sureflap cat door uses 4 AA batteries that don't last very long; this design uses D-size cells that last months (5 or more) instead of AA cells that last about 3 weeks. You can't use rechargeable batteries in the Cat flap door they…
Replacement cover for the PetSafe Petporte, without the battery cover, but instead more space on the inside.
I love my PetSafe Healthy Pet Water Station but my 2 spaniels always had dripping wet ears due to the bowls width. These guards allow the dogs to drink while keeping their ears dry. I've included the Fusion360 model so that you can adjust…
