Liczymy pasujące modele…
Phone Stand with honeycomb structure, it also has a place for charging your phone. I recommend you print this on its side, I printed it with some custom supports. However, I don't think you'll need supports if you print it on its side. I…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
This phone/tablet stand is designed to be as universal as possible, print in place, and fold flat while being very durable. It comes in 3 sizes. Each variant is designed around its specific load. Small - 52x83x3mm - About the size of a…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
🏆 Thrilled to share that I've been nominated for Platform Designer of the Year at the 3D Printing Industry Awards 2026! If you enjoy this model, I would be incredibly grateful for your vote. [Click here to vote for Thorin Oakenshield]…
Wydruk około 6,45 €–7,88 € nettoWstępna wycena jednego wariantu
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
This fast-printing phone stand has been specifically designed to print in ‘vase mode’ (and 0.8mm line width) to allow for very fast printing and low filament usage, whilst maximising strength and stability. Key features: Very fast to…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
After my Simple Universal Phone Stand that got featured I got a new phone. So I made a phone holder version 2 for bigger phones and other improvements. You can print it on the side as shown in the picture. NOTE: If your phone is to big…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
Originally the remix of the ingenious Car Vent Gravity Phone Holder by Abdel Darwish that in the version V3 I remodeled from the scratch, keeping the original idea and general outline. Main changes in V4 (2025-07-26) Changed parts : Arm…
Wydruk około 1,18 €–1,45 € nettoWstępna wycena jednego wariantu
A simple but characteristinc design for a modern headphone or headset stand. Great to display or rest your device on your desk. Best to print in - no special settings required, standard print settings are just fine Happy printing!
Wydruk około 3,49 €–4,27 € nettoWstępna wycena jednego wariantu
Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…
Wydruk około 10,61 €–12,96 € nettoWstępna wycena jednego wariantu
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
With this innovative support, your pinky finger will no longer have to hold your smartphone. In addition to providing a secure grip for using your smartphone with one hand, you can always carry it with you. Its design allows you to place…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview This is a fully adjustable phone mount using a ball and socket joint compatible with any type of filament requiring minimal support material aimed to be printed with any FDM 3D printer. This mount is designed to be compatible…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
A Minimalist IPhone case with hexagonal Design on the back and a nice snug fit. Works fine with Both PLA and PETG.
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
BACKGROUND: The QMX , (tr)uSDX and Elecraft KX2 and KX3 are fantastic portable radios, but the microphone for the KX2/KX3 is relatively big and heavy, and there really is no good mic option for the (tr)uSDX. So, I decided to design one.…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since this stand is pretty big I split it into two pieces which can be printed together on one plate on the Prusa i3 MK3S. The print does not need any supports when printed as setup in the “Headphone Stand Split Complete.3mf” file or if…
Wydruk około 6,75 €–8,25 € nettoWstępna wycena jednego wariantu
Why not enter a contest, am I right? I don't typically keep my phone on a stand, but every once in a while, I do need to have it propped up. This stand was designed to be very easy and quick to print (just 30 minutes!), and like a lot of…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
GOAL : Mount a display (phone in this case) below the monitor in my home office. This display shows my agenda, provides controls for lights, AC and shows temperature/time. In the (near) future it will provide more controls and info.…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
I wanted a fun and better way to use the MagSafe chargers for my iPhone and Apple Watch, so I designed this! :) Printed on MK3S with painted on supports for hands and top of circle face. 3mf attached is the slicer file with settings and…
Wydruk około 7,25 €–8,86 € nettoWstępna wycena jednego wariantu
This phone holder is designed to hold your phone vertical or horizontally at three different angles: 60, 70 or 80 degrees. The holder comes in 2 different models, the lightweight or infilled model. The lightweight model prints on its side…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu
The idea was to have a simple and clean looking stand, which can hold bigger phones (5.5 inches for the phone in the picture) or phones which are protected by a thick case. I also made sure to keep this thing easily printable, without any…
Wydruk około 4,76 €–5,82 € nettoWstępna wycena jednego wariantu
I brought a new phone a while ago and I wanted to print a Tripod to take pictures of the night sky. However, I didn´t quite find anything that I wanted, so I decided to design my own. This is my first project I upload so I don´t really…
Wydruk około 1,13 €–1,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed to work ideally with an iPhone 14 Pro or similarly sized iPhone (13, 13 Pro, 14 should be similar) to charge with Apple MagSafe USB-C charger. V2 - Added TPU Base After months of use, I wanted to revise this to fix a couple of…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
This model is free. If you appreciate this model, please leave a download and a like! iPhone 14 Pro and iPhone 14 Pro Max. Stylized dummy phones to see if it fits in your pocket/purse/bag/jacket. Based on measurements and reference images…
Wydruk około 2,45 €–3,00 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
Wydruk około 18,09 €–22,11 € nettoWstępna wycena jednego wariantu
Keychain Phone stand, very easy printing.
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
A new keychain for use with your smartphone. Small, practical and fun keychain with different forms of animals. In addition making a keychain, you can use it to stand the smartphone. https://youtu.be/VMJjUnYXQE4 I used this filament:…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
I designed this phone holder to with the idea to have minimal parts and print time and no support. The base can be mounted on a tripod with a standard 1/4 - 20 unc screw. It is advisable to print the knob with at least 50% infill and…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Ein Mikrofon mit Ständer und abschraubbarem Kopf zum Verschenken von Eventgutscheinen. A microphone with stand and unscrewable head for giving away event vouchers. Print instructions Gedruckt in PLA mit 0,2mm Schichtstärke. Länge: ca.…
Wydruk około 2,36 €–2,88 € nettoWstępna wycena jednego wariantu
Please click if you appreciate my work :) The dimensions of the opening are 80 x 15 mm, which allows for the placement of most phones. >> You can buy me a coffee here : ) << Commercial license: https://cults3d.com/:2860697
Wydruk około 11,47 €–14,02 € nettoWstępna wycena jednego wariantu
This little helper works as a cell phone stand and shopping cart hijacker. Its printed in place and can be folded to be stored in your pocket. The print time only takes 37 minutes. You may need to carefully break the hinges free after…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Just a simple MagsSafe phone stand with the infill visible. Use the .3mf file to specify an infill that suites your taste. Adaptive Cubic is my favorite infill for this model. Printed at .3mm with supports using Eryone Navy Blue Matte…
Wydruk około 1,59 €–1,95 € nettoWstępna wycena jednego wariantu
iPhone phone stnad
Wydruk około 3,89 €–4,76 € nettoWstępna wycena jednego wariantu
Steve5092 made a pretty good tripod, but his sleek design also needs more supports. Since I gave away my old one, and had to print a new I thought I'd make one with flat sides so it's easier to print.
Wydruk około 6,18 €–7,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remixed from TheLightSpeed! to get a more bumper type feel. Print instructions print in whatever material you want. should snap in tight.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
This model provides a representation of the overall dimensions for the iPhone Duo, to evaluate how it feels in the hand, and whether or not it will fit in your pocket. It was modeled using overall dimensions announced by Apple (not a…
Wydruk około 3,17 €–3,88 € nettoWstępna wycena jednego wariantu
This unique Print-in-Place keychain can hold your phone upright or sideways so you can watch videos on the go. Prints in under 40 minutes with no supports and is ready to use straight off the printer. The snap in design is satisfying and…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
Fan of this model? A Like and a Make would be more than appreciated! These playful cat and dog device stands are a quick and easy print (2-3 hours) , making them a fun and practical addition to any animal lover’s desk . Designed with a…
Wydruk około 4,38 €–5,35 € nettoWstępna wycena jednego wariantu
If you want a ridiculously over-designed (over-artisted?) solution for holding your phone, this i the model for you! :) My goal was for it to not really look like a phone stand when it wasn't in use. I also didn't want the model's face to…
Wydruk około 13,98 €–17,08 € nettoWstępna wycena jednego wariantu
I remixed SchuMaker's Smartphone Holder Design with honeycomb on the bottom part. Just filled the hole on the bottom with fusion360 and added a modifier to remove top and bottom layers.
Wydruk około 3,61 €–4,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are surely simpler adapters to be fair, but this one can fine-adjust the way the camera looks into the lenses, to get the best picture quality. NOTE: This is model was more a personal project, I just decided to share. The tolerances…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bedside charging station for your phone, Samsung Galaxy Watch 4. I have a Galaxy S9+ but it should work with most phones. This may work with other chargers also. The Watch charging base is 33.5mm wide x 9mm deep.
Wydruk około 5,62 €–6,86 € nettoWstępna wycena jednego wariantu
Modern Telescopic Phone Amplifier: Stylish Sound Enhancement Product Description: Introducing the modern telescopic phone amplifier, a stylish solution for enhancing your phone’s audio experience. This innovative design features a…
Wydruk około 7,38 €–9,02 € nettoWstępna wycena jednego wariantu
D: Schutzhülle für das Apple iPhone 7 plus+ und iPhone 8 plus+ Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. E: Safty case for Apple iPhone 7 and iPhone 8 I printed the case in PLA as…
Wydruk około 5,28 €–6,45 € nettoWstępna wycena jednego wariantu
I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena jednego wariantu
This versatile phone stand is designed to securely hold your smartphone in both portrait and landscape orientation. The geometry is fully optimized for support‑free 3D printing, ensuring clean results, shorter print times, and efficient…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
printed with PLA, but can be Petg or TPU. TPU would be best choice. If you need some help, or need change the sizes please contact me
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
UPDATE - 3-15-2023 This case is meant to be a little loose in order to protect your expensive in-ear monitors or earbuds from getting tossed around or wound tightly which can add wear and tear and strain cables over time. BUT i always…
Wydruk około 4,39 €–5,37 € nettoWstępna wycena jednego wariantu
Whether you've got flexible filament or not, these cases make for an easy print and a sweet looking phone. I designed these cases to print without support, so they turn out very clean. Both versions also provide a buffer for the screen…
Wydruk około 1,67 €–2,05 € nettoWstępna wycena jednego wariantu
The clips supplied with the general car mounts don't hold well and that bothered me. Inspired by various similar holders, I came up with this version, which can be printed horizontally. The horizontal printing position improves the…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
This is made for the Gulikit KingKong 2 Pro controller. I have not tested it with their other models, but it might work with them too. Main Features Pass-throughs for the back buttons (turn off, switch modes, pair) A hole for the charging…
Wydruk około 2,95 €–3,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
A small twisted piece that wraps around the charge cable to protect the ends from being damaged from frequent pulling. This file is suitable for the original iPhone charge cable's size. May not be suitable for other cables. Print…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Inspired by the Xbox One S controller mounting clip, this clip is designed to snuggly snap around the 8BitDo Ultimate bluetooth controller. Based on a 3D scan of my controller, it fits best by hooking the clip to the top, and then…
Wydruk około 2,20 €–2,69 € nettoWstępna wycena jednego wariantu
Optimized for Prusa MINI+ (18x18cm) No supports No other parts needed
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
01.12.2024: Added a version without the logo as requested as well as a step file so you can add custom logos if you want to. I created this model in order to use my phone with a QuadLock Mount I bought. It just goes on the back of a…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Combined Stand for iPhone, Apple Airpods and Apple Watch. For Wireless loading an IKEA NORDMÄRKE QI-Charger is used. Works great with iPhone 8 and iPhone Xs (also with original Apple Case). For Watch and AirPods the original loading…
Wydruk około 17,24 €–21,07 € nettoWstępna wycena jednego wariantu
3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
I was playing around with a new 3D drawing software when I came up with this idea. Allways wanted an easy trouble free bedsite phone stand. You just place your iPhone on the MagSafe and that is it, no matter the orientation. Best glue a…
Wydruk około 6,28 €–7,67 € nettoWstępna wycena jednego wariantu
It features: 1- Outer measure (main rule: mm/inch) 2- Inner measure (main rule: mm/inch) 3- Depth measure (depth rule: mm / main rule: inch DON´T use main rule for depth measures) 4- Phone Stand 5- Keychain hole 6- Spring ideal for a…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Very simple Half-Life inspired phone holder. It resembles Half-Life Lambda logo with minor tweaks to make sure your phone can sit comfortably on it. It's a very simple print so you can slice the model yourself just the way you like it. I…
Wydruk około 4,32 €–5,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
iPhone 13 - Gyroid cover - Light weight
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a very practical smartphone stand / tripod, wich is perfect in many usecases. For assembly, you will need: 1x M5 65mm bolt 2x M5 25mm bolt 3x M5 nut Feel free to share your own experiences with the community! This smartphone stand…
Wydruk około 5,36 €–6,55 € nettoWstępna wycena jednego wariantu
One piece Most dangerous snailphone ! Buster call is coming
Wydruk około 4,46 €–5,45 € nettoWstępna wycena jednego wariantu
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
One piece Best way to call Don Quichotte Doflamingo
Wydruk około 4,75 €–5,80 € nettoWstępna wycena jednego wariantu
Phone case for the Samsung A22 Printed in PETG or PLA. Printable in TPU with adjusted scale-factors. (x,y: ca. 99% ; z: ca. 105%) More 3d-printing tips on my website:…
Wydruk około 3,52 €–4,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Originally, I was planning on printing a similar smart phone holder from Thingiverse ( https://www.thingiverse.com/thing:4982411 ), however, something looked subtly wrong about that design. Eventually, I decided to roll my own, learn…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
HexDish SignalBoost: Amplify Your Cell Signal Outdoors The SignalBoost HexDish is a modular parabolic reflector designed to enhance cell signal reception in remote areas like forests, campgrounds, or anywhere with limited coverage.…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
An ideal accessory for your Halloween costume. This keychain will help you to hold your smartphone or as a card stand. Print instructions Category: Accessories Print Settings Printer: prusa i3 Rafts: No Supports: No Resolution: 0.2…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
For mobile phones widths from 70mm to 90mm. Bracket to ventilator are various versions. One version is for horizontal shovels width 16mm and second for width 11mm.Bracket to ventilator is prolonged by 9mm that leans against upper wall…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I really enjoyed Sneaks' wonderfully designed Adjustable Stand and how well it works for tablets. Wanting a smaller version that fits for my phone, I scaled down the parts, removed material from the bases, and slightly modified the hooks.…
Wydruk około 3,36 €–4,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ENGLISH description: I have one of those aluminum mStands for my laptop at work and I wanted a phone stand to match.... So this was born. Enjoy! There are 3 styles to choose from, Apple, Android, or plain (no logo). I was kinda in a rush…
Wydruk około 6,01 €–7,35 € nettoWstępna wycena jednego wariantu
This is my horizontal "widescreen" HoloBox for Smartphones, based on Pepper's ghost illusion technique. Superb for advertising stuff! Very easy build! Print out the two halves snap them together (they have snap-joints). Slide in the…
Wydruk około 8,88 €–10,86 € nettoWstępna wycena jednego wariantu
A phone stand inspired by La Linea a.k.a Lineman a.k.a Linus på linjen. Cutouts in “shelf” to keep the speaker and michrophone free from obstruction.
Wydruk około 4,77 €–5,83 € nettoWstępna wycena jednego wariantu
Uploaded the G-Code as well for the prusa mini+ with painted on supports. Supports are needed!
Wydruk około 10,42 €–12,74 € nettoWstępna wycena jednego wariantu
Tesla Supercharger Phone Charger! The original design didn't fit type C cables so i remixed it, i uploaded the full charger in each folder for easy download but the only part that differs is the Red Middle. The Type C socket is made for a…
Wydruk około 0,90 €–1,11 € nettoWstępna wycena jednego wariantu
Skoda Fabia 1 (1999 - 2007) phone holder on dashboard Diameter of the ball is 17mm I used the Baseus Car Phone Holder from Aliexpress as the holder itself https://s.click.aliexpress.com/e/_DBAMS11 It is necessary to print the model split…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can use any 15mm, 17mm or 1 inch ball attachment to add a phone/accessory mount or charging to your dash. It clips in the decorative channel between the screens with a little pressure. This model is inspired by the mounting meathod…
Wydruk około 3,61 €–4,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my original design for Miniature Over-Ear Headphones , specifically scaled to be the perfect accessory for collectible figures like Labubu, Pop Mart, and other 1/12-scale art toys . The unique print-in-place construction means no…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Here is my iPhone Monitor Mount, the perfect solution for using your iPhone as a webcam during Zoom and other FaceTime calls. This mount is designed to work with a Viewsonic monitor and may work with a variety of other monitors. This…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
Praktischer immer dabei Smartphonehalter für den Schlüsselbund. Sehr klein und Handlich, bleibt auch nicht überrall hängen. Always handy smartphone holder for your keychain. Very small and handy, and won't get caught on things.
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This is a fully parametric customisable phone stand for any phone printable in well under 30mins. Small enough to chuck in your pocket or on a keyring. Angle is adjustable depending on where it is positioned on your phone. Works best in…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The first design (dummy) was created by Paperpilot and was discussed here . I have remixed the design from Warc , adapted it and made it ready to print. Thank you for the work. I moved a few things around until it fit for me. From that I…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
This is a phone mount for an NC Miata. It's designed to mount onto the air vent next to the glove box using zip ties. There are three versions, one is a AMPS compliant mounting plate, a 25mm ball joint, and a 17mm ball joint. There are…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
Remixed and improved Phone stand for VW Passat B6 Bluetooth by: Adrian-Claudiu Bîcleșanu Changes of this remix Sacrificial layer for better print of holes for screws on the base bracket Redesigned left/right and down bracket Bigger holes…
Wydruk około 4,50 €–5,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…
Wydruk około 3,42 €–4,19 € nettoWstępna wycena jednego wariantu
Universal (Smart)Phone Stand by PBR Designs Stable stand in every orientation Should fit all smartphones (tested with Samsung Galaxy and iPhone) May not hold tablets (holds iPad Air/Pro horizontally) Printing instructions: 2 walls are…
Wydruk około 3,00 €–3,67 € nettoWstępna wycena jednego wariantu
Printed at 0.3mm layer height on a MK3s and MMU2 with 3DQF PLA filament. I used support on build plate just for the fixings on the back but probably not necessary.
Wydruk około 11,68 €–14,28 € nettoWstępna wycena jednego wariantu
I printed the box in Prusament PLA with 0.15 layer height speed profile on MK4 MMU3 (no space for purgetower - so it's a single color print). The magnets require a bit of force to be inserted. I used a hard object to press one side into…
Wydruk około 8,97 €–10,97 € nettoWstępna wycena jednego wariantu
Superb Adjustable Phone Holder, originally made and distributed on SD card with Kywoo3D printers. You can scale it as you see fit, for example around 200 % should be enough for iPads. lower paws are wide enough to hold phones even with a…
Wydruk około 4,09 €–5,00 € nettoWstępna wycena jednego wariantu
This is a dashboard mount for Fanatec's CSL DD wheel base along with a Google Pixel 6a. Feel free to tinker with the provided .ipt file (Autodesk Inventor or Fusion 360) or even send me your smartphone model and I'll gladly modify the…
Wydruk około 3,06 €–3,73 € nettoWstępna wycena jednego wariantu
Update: Improved volume and fit, as well as a version for the left hand. (Example printed in white PLA+ from eSUN). Background: Created for my partner who has quite big palms - he said when playing for longer it is straining to hold the…
Wydruk około 2,44 €–2,99 € nettoWstępna wycena jednego wariantu
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Das ist eine Halterung für alle Swissphone s.QUAD Melder für den Nachttisch damit der Melder nicht herumliegt oder dauerhaft in der Ladestation steckt. This is a holder for all Swissphone s.QUAD pagers for the bedside table so that the…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
Original Printfiles here https://www.thingiverse.com/thing:3681512. There's also a build instruction. The mobile phone holder is not compatible with new iPhones which have the large stove camera lenses on the back. The holder is only…
Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu
Mount any 67mm camera lens filter to your iPhone. It's precisely measured to fit an iPhone 12 (Pro), without a case. I'm using it with a ND2-ND400 (9 Stops) Filter from K&F for filming. Advantages over commercial products I found: All…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Phone case for the Samsung A22 With raised lip (height about 1.5 mm) for a better protection of the display. Compared to the original model, the case is about 1.5 mm thicker. The edge is not flush with the display. Printed in PETG or PLA.…
Wydruk około 3,69 €–4,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed in ASA to be able to withstand the heat in my car. Edit 6/18/24: I added 2 files one for 162mm length phone w/ case and a Step file to be able to adjust the model to your liking. Just make sure the pegs that go into the vents…
Wydruk około 5,98 €–7,31 € nettoWstępna wycena jednego wariantu
Swissphone Boss Meldeempfänger Clip.
Wydruk około 2,18 €–2,67 € nettoWstępna wycena jednego wariantu
Foldable stand for Smartphone . It can be used with Tablets but if the weight or size is high, the support can be closed.
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
