Liczymy pasujące modele…
Found with a heavy plate that I wanted to display that the original felt like the balance was off and could easily fall over when bumped. I have copied the summary from DanRom624 (original from Thingiverse:…
This is a custom-designed picture frame, available in several sizes and configurations. Each side piece prints individually and connector pieces hold it all together. There are several variations of the connectors depending on how tight…
Baroque Picture Frame, shown printed in Hatchbox Woodfill PLA at 20% infill and 0.2mm layer height. Picture area is about 4.5" tall and 3.75" wide at full scale. This is a remix of levenement71's beautiful Baroque Picture Frame as an…
I'm collecting old baroque picture frames for some years now to publish my photos in them (and to distract the viewers eye away from the amateurish photos to all the ornaments and shiny stuff). Now as I'm in posession of a 3d-printer (or…
A quick and easy stand for a picture frame.
These french cleat mounting plates can be used to hang your picture frames on the wall. It can be mounted using small screws, double sided tape or glue. The picture frame cleat has a cutout to go around the (often) included nail hook.…
It has 2 versions, one with a slot for customizable plates and one without. The dimensions of the customizable plates are 42x10x1mm. You can make signs in these dimensions yourself, if you have no experience there are many tutorials, e.g.…
Model consists of 4 bars (two sides, upper one and lower one) and four connection pieces. The longest one is the side bar and can only be printed diagonally on the bed. Lower bar has two integrated latches that hold the picture from the…
This is a Victorian Style Picture Frame, it was made for the PrusaPrinters 3D Contest. I thought about what kind of Frame i would like to print and something came in my mind. This Frame is a very detailed and big print with a lot of…
Modular Picture Frame Kit Update 03/06/2026 The metric frame parts 120mm up to 180mm angles were wrong. They were 44.13 degrees and should obviously have been 45 degree cuts for the corners. Thanks to Frey4cre for pointing this out. These…
The picture frame can be scaled easily, but remember to scale everything evenly. The backboard can be adjusted if you want to add a 20x20 piece of glass or acrylic glass. Supports needed. Make sure to disable support for the plug holes. I…
I designed a plate stand off a picture I saw online. It prints in two parts that perfectly fit together, no glue needed. ***Update: Added a thinner version with less protruding ends in front of the plate/picture.*** ***Update: floating…
This Valentine share your love with your soulmate using this beautiful frame saying I Love You Not requiring supports glue its easy to print. Just cut and put your picture and close it. Because its not glued, you can change pictures when…
This has been remixed from https://www.thingiverse.com/thing:1615502 and turned into a picture frame. Parts Needed (4) M3*8 screws Print Settings Supports suggested for the opening of the photo. Layer height of 0.20 mm or smaller. 10%…
An abstract picture frame, inspired by the sound-guiding wall cladding of the Elbphilharmonie main concert hall in Hamburg (Germany), also dubbed “weiße Haut” / "white skin". The frame's front side makes full use of the 3D printers'…
Easy to assemble stand for a 4”x6” photo frame. Having a few homemade ¾” hardwood photo frames for 4”x6” photos, it was only natural to come up with a sturdy stand for them. Hopefully these will work for you. The stand’s back is around 6”…
This is simple picture frame with stand. The connection between the front part and the rear part is press-fit. Originally the frame was created for a picture height / width: 105 mm / 150 mm (PictureFrameFront.stl,…
This is a print in place picture easel and plate stand. It is 180mm tall so it works really well for 5x7 photos and smaller. I recommend printing in .2mm so the hinges will print in place. Check out my YouTube channel for more maker…
If you want to support me or get commercial licenses , you can join my Patreon membership starting from just $2 per month: https://www.patreon.com/UniversalMaker3D Mainly designed for instax film but fits also other pictures. 🛠 Suggested…
Printed with a Bambu P1S in PETG without any supports.
Update 2024-04-11 New framework models for the rear left and rear right. I remove one beam on this. No manual rework necessary. framework-rear-left_1x.stl framework-rear-right_1x.stl This is a modular set of models for a diorama or…
Nail the parts behind picture frames and use a nail or screw in the wall to hang the picture onto. The original part I modeled from is in the first picture. I modeled 2 holes for different sized nails. Cheers! ----------------- Update V2…
This picture frame comes with a backboard that allows for easy assembly and a snug fit. The thick version of the backboard provides more space for thicker materials or accommodates a glass or acrylic sheet over the picture. The frame is…
I wanted a wall hanging frame for my selfprinted photos wich didn´t need much filament and looks fancy ;) The frame is scalable through the parameterized f3d file. Depending on your printers print quality, the inner frame sit´s tighter or…
Want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact detail on our page. For more of my designs check out my website: https://3domengineering.com.au This is a replacement stand…
A Marvel Wall hanging for anybody who enjoys Marvel comics or films. Great as a gift. The logos are: Black Panther, Thanos, Thor, Captain America, Hulk, Captain Marvel, Spiderman and Iron Man. The picture is 185mm square but can be scaled…
Hello makers! Looking for a picture frame for a weirdly sized picture, note, or other flat surface that you wish to display in a frame? This scalable picture frame allows you to quickly make custom-sized pricture frames! It's easy:…
GHS Physical/ Health/ Environmental Hazards Pictograms In my profiles (Bambu Studio) there is 1 sign per printing plate, the printing plates are named accordingly. The Signs are already colored and an AMS is neccessary. for more…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Build your own custom-sized frame…
As Valentine’s Day is just around the corner, Deltaprints is once again bringing you something perfectly suited for the occasion. A beautiful, playful heart-shaped photo frame that stands on additional hearts and instantly catches the eye…
The realization of Mona Lias's frame model was part of an insane commission that I had only one week for. I have printed several parts in true scale and glued a total of 20 pieces onto a wooden frame. I don't expect you to print out the…
A Star Wars Wall hanging for anybody who enjoys the iconic Star Wars films. Great as a gift. The picture is 184mm square but can be scaled to suit your printer, available with or without a wall fixing. You need to print this with 'detect…
This was based on an old picture frame (see photos) with a painting inside it. I scanned the image using realitycapture. Cleaned up in blender. Good luck printing! Included are the original shape, plus a more letterbox / wide angle shape.…
I designed this to support some document frames which are 9mm wide as well as a lithophane which is 4mm wide. I've included STLs for 2mm through 12mm in .5mm increments with tilt angles set 1 degree less steep for each 4mm of increased…
Two picture frames, 1:12 scale - actual sizes 30mm x 30mm & 50mm x 30mm. The included Fusion360 file is is presently set to 50 x 30mm but it’s very parameterised, so anything is possible. Have fun!
Create you Star Wars Ep. IV - A New Hope - Trench Run framed WallArt. You'll need a picture Frame from IKEA (RÖDALM, 54x27 cm), and double sided adhesive tape (or glue). Print 40 Tiles (in any combination to your liking) of the 12…
small picture holder for instax mini photos can be mounted to the wall with a small nail or put on a desk or shelf with the stand. I have also included a mount that holds standard 4x6 pictures the stand also works with 4x6 pictures in…
This was a quick and dirty picture frame I created for one of my kids. The back slid into the frame surprising well. The models should be oriented in the position I used to print them. You shouldn't need any supports. Print Settings…
Material: PLA Printing speed 100mm/s Support No Plate adhesion No 15% filling
You can use this frame to backlight 4 Litophane pictures at the same time. Choose suitable images, print them according to the instructions below. Then print the frame and you have a nice gift for your next birthday. Assembly Such fairy…
Simple magnetic picture frame tuned for a 4x6 print. Easily modified if you know openscad but the provide stl files will work as-is Holes are for insertion of standard magnets you can find on ebay Instructions: Print in two pieces…
This is a 5x7 picture frame with picture support and a brace to hold everything together. Created a slide in stand that attaches to the holes in the picture brace. The picture is placed in the frame, then the back plate, then the brace to…
Nice picture frame for horizontal or vertical pictures. Mabe the perfect gift for valentines day?! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament: 3D Jake PLA Silver…
A minimalist frame for your art prints! I've found often at craft fairs / farmers markets / art markets, I can buy an art print from local artists and they will come either on a 1/8 in thick foam board or wrapped in protective film. To…
UPDATE: added a currently untested version with a small hanging hole, the files for this print are marked with _hang stargate: print with supports at 0.12 base: no supports, i printed at 0.12 but 0.2 should be fine base: no supports, i…
I designed this picture frame in Fusion360 to be customizable, print support free, snap fit together easily and feature a storage spot inside for special items. It is intended to fit a 4"x6" or 100mm x 150mm photograph. I used a piece of…
Walt Disney Pictures logo in 3D. 5mm high.
A simple, modern picture frame stand, with a low profile so that it is hardly noticeable. Fits most picture frames and works for portrait or landscape orientation. Can also be used to stand up signs and other artwork.
I had this IKEA frame on my bed side table that does not stay up anymore. That's why I built this stand to keep it at 20° angle. The picture frame is 20cm x 30cm x 3cm. I also added the fusion 360 file so you can customize it for your…
🖼 A4 Size 3D Printable Picture Frame – Modular, Minimalist & Secure Showcase your favorite photos, artworks, or prints with this sleek and modern A4-size picture frame – fully 3D printable and easy to assemble! Designed with simplicity…
Porta retratos personalizable de diferentes tamaños 50x70, 70x100 y 100x150. El porta retratos tiene dos orificios (10 mm de separación) para insertar símbolos nombres etc y personalizarlo. Customizable photo frames in different sizes…
This is a low profile hook specifically designed to allow framed pictures to sit well on an Ikea Skadis pegboard system. Sometimes the frame does not want to sit flat against the board or has a desktop mount which causes it to twist. In…
This picture frame is designed to fit any rectangular sized picture and requires no supports. In PrusaSlicer: Scale the X and Y dimensions for the back plate to the dimensions of your picture (e.g., 150mm x 100mm) Then scale the length of…
A simple picture stand that should fit most instant camera pictures by customizing! Based on LuminDesignLab's design. 🧾Instructions (very fast & easy & online): here is a detailed up-to-date tutorial on how to customize online:…
The whole model uses about 90 grams of filament. I do 15% infill, Snug supports along the interior of the frame, no supports on the holes on the back of the frame fillets down on the picture backer. I also use .1mm layer heights to keep…
a simple stand for pictures or calendar pictures
The Ultimate Picture Frame is a one-of-a-kind modular 3D printable design that allows you to create a frame of virtually any size from just a small selection of pieces to ensure that no art is left unframed. It is easy to print, requires…
Based on the design from @Kittelot and trimmed in order to fit on the Prusa Mini. I also removed the center of the backing in order to save on material since it was not required. It fits 4x6" photos nicely! Print Settings: Print with…
a clone of the original wall hangers from tessa but in a 3d print friendly design.
Dragon in a Cave 3d Picture
Would you like to know, how to create your own puzzles? Read the article: https://blog.prusaprinters.org/print-your-own-3d-puzzles/
Designed to be printed on narrow side for strength! This makes hanging picture, photo, or poster frames with toothed hangers on the back incredibly simple. Pictured is version 1. Version 2, the STL version I've shared, slightly lengthens…
We revamped our Harry Potter Mirror of Erised, now its a beautiful picture frame that prints with no supports. Just in time for the holidays, hope you enjoy them as much as we have & all those we have already given them out to as gifts…
A simple 4x6 picture frame. My daughter needed a picture frame for a school project. Nothing too fancy, just glue or tape the picture into the frame.
UPDATE: I also have done a 32x32 Matrix in a IKEA picture frame with WLED: https://www.printables.com/de/model/501107-led-rgb-matrix-ws2812b-esp32-wled-32x32-round-squa…
This is a Picture frame to Frame a Mini light Box and 3D printed Lithophane image. Mini Light Box can be purchased here: https://www.amazon.co.uk/gp/product/B0767LGTZM/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 This is inspired by…
Picture frame turn button to hold the backing on to a picture frame. To be used with a #6 screw.
Miniature picture frame (~35 x ~40mm outer dimension) with an integrated stand that works for both portrait and landscape. Area inside the frame fits an 8x10-ratio picture. Picture is held in place by a small ledge. Prints fine without…
Check out the attached instructions.
This upwards facing picture hook is made for canvas printed posters on wooden frames. They have a closed wooden frame all around and getting them on the wall with a zero gap is difficult with normal picture hooks. That is why I designed…
I hope you enjoy this print. I made a small locket with a rotating joint based on the old bionicles connection (Shown in the picture below). This was made for the Prusa Valentines contest. The printer needs to be well tuned. But just in…
I saw something similar on the Web and thought I could do this my self. So here it is an Airplane Window Picture frame. The Picture size will be 10x15mm (4x6 inch).
A relatively quick print that will save you from having to lean your pictures against the wall or other ornaments. The stand measures 141wx125hx90d The channel is 6.5mm wide. The pocket behind and under the picture is to accommodate the…
A Mickey Mouse shaped picture frame. The "portal" diameter is 90mm (about 3.5in) and nicely hold a picture with a diameter of 101.6mm (exactly 4in). I cut my images from a 4x5 printed photo to size using the included "disk.stl" file as a…
Portaretratos. Picture frame Consta de dos piezas, el cuerpo y la tapa, la tapa contiene una ranura por donde se inserta la foto, y esta pieza se inserta horizontalmente por la ranura del cuerpo. It consists of two pieces, the body and…
Material: PLA Printing speed 100mm/s Nozzle temp 215 Bed temp 60 Support No Plate adhesion No 15% filling
Small and simple Polaroid picture holder for 600 format films. There are 2 versions for round images and square images. Print Square version with support!
Needed to fix a picture frame for a family member. Printing 4 of these along with a ratchet strap worked WAY better than I though it would. Turned out Great. Ratchet Pictured is 1in (25.4mm). I assume any strap from ¾" to 1 ¼" (19.05mm to…
Present and display your collectible photo cards in these elegant picture frames Prints without support due to multi parts click connect design 75° angled to mitigate reflections 56mm x 88mm maximum size of the card Separate inner frame…
for photos, postcards, ... This is a very basic photo/picture stand. Comes in three diff. sizes. 100mm, 150mm and 190mm width. Print Tips Print seperatly. put in photos afterwards Only use printable material Don't bend stands any further…
Hello Makers, i wanted a bigger LED matrix with 32x32 LEDs. So i looked for a nice picture frame that fits also for the depth. I found a good & cheap one on IKEA. On Youtube there are lots of tutorials to build a 32x32 matrix out of four…
Make your pictures instantly better by putting a seamless backdrop behind it. If there are any problems with the model, please let me know, and I will get back to when I am able.
Made this for larger prints and added a few holes to hook into a small nail or photo hanger. Should fit an 8 by 10" photo perfectly if your printer prints to size accurately. You can measure after the first layer goes down if you're…
This is just a fun project. When I saw the trailer for Dune Part Two, I noticed this cool frame and decided to create a fan piece that can be fully printed on larger machines like the Elegoo Neptune MAX. I haven't printed it yet, but it…
Simple stand for postcards, letters, pictures or whatever you want to display. Printed on a Prusa Mini in about 30 min. Filament: Prusament Galaxy Black PLA Infill: 15% Layerheight: 0,15mm
Remixed from this and the original to fit a 5x5 photo. Be warned the fitment is exact (no margin for shrink), so mine printed slightly smaller than 5" and I had to trim the picture. You might want to scale it up a percent or two for some…
This is a picture of Mario. It can be printed using filament changes - need help? let me know :) It can also be made by printing the 'separate' files for each colour and then gluing them together. @3DPrintBunny Support me on Patreon:…
Salut, This is a simple but effective photo support. It is compatible with photos or drawings from 10x15 to 20x30. I printed in variable height and with the new parameter in Prusaslicer "irregular surface" (thickness 0,1 - distance 0,3).…
Bildaufhänger zum Aufkleben mit genügend Möglichkeiten das Bild zu verschieben um es gerade auszurichten ;-) Dazu passende Abstandshalter. Ich habe ihn entworfen um ein Puzzle aus Holz aufzuhängen. Der Aufhänger ist 40x35x5 mm. Gedruckt…
This Valentine share your love with your soulmate using this beautiful frame saying Our Love Not requiring supports glue its easy to print. Just cut and put your picture and close it. Because its not glued, you can change pictures when…
iPad Air Photo Frame Stand This print turns the 1st generation iPad Air into an attractive and useful digital photo frame. The four pieces slide onto the iPad and fit together neatly in the style of a mitered picture frame. Small magnets…
I used the presets with supports on build plate only. I included a color change
There are three sizes: small, medium, large and extra large. Small albums (left small, right small), medium albums (left medium, right small | left medium, right medium) or large albums (left large, right medium | left large, right…
Made for the picture frame contest. Fits 5x7 inch pictures, I went with that size since it seems to be one of the most popular. Voronoi Pattern with my logo on front, hidden behind the picture. Stand is also voronoi design, and will work…
A simple ‘L’ shaped picture / photo stand which slot together to provide an easy, useful stand / holder for pictures / photos or ceramic tiles for those who've tried laser engraving onto ceramics. No particular settings used, but I went…
Simple three (printed) and two built in components lithophane night stand photo frame. Ideal for present. Materials used: Frame (front and back cover) - PLA Wizards Voodoo (0.4mm nozzle, speed: 30mm/s, LH: 0.2) Lithophane - PLA Semi Matt…
3d Picture Chinese Dragon
I've included the OpenSCAD source, plus the STL files for an 8x10 photo frame. Print 2 of each side, 4 corners and a hanger. Layout the frame face-down. Center the photo on the frame. Pop the corners and hanger in place. Add tabs to any…
Da ich nix vergleichbares gefunden habe, habe ich selber einen Rahmen erstellt. Der Rahmen ist schlicht und zeitlos. Bilder können einfach eingelegt werden. Der Clip kann mit zB Tesa Powerstrips an der Wand befestigt und der Rahmen drauf…
