351 modeli
Palm brace (splint) For fixating the wrist and palm (metacarpal fractures). The brace must be shaped into a neutral position, to prevent the shortening of tendons and ligaments and placed on the FRONT side of the forearm (see picture). If…
Wydruk około 4,04 €–4,94 € nettoWstępna wycena jednego wariantu
Pinky finger/thumb brace (splint) Suitable for fractures of the fifth metacarpal bone, to stabilize injured ligaments of the metacarpophalangeal joints (between fingers and a palm). Depending on the length, it can be also used to fixate…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
SCM minimax cu 410c splinter guard You can take a look at the cover picture to see the original and 3D printed part side by side. Excerpt from the machine manual: Safety Be very cautious, when using this 3D printed replacement for the…
Wydruk około 5,98 €–7,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replace the original Makita Case Stick Original is broken, so i designed a new one with a ring on top for better removing. Use for 6270d and 6271d cases. Infill: 15% or more Filament: PLA or PETG
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Français : Kit de fixation de plinthe pour Lave-vaisselle ; basé sur pièce 00612653 - compatible BOSCH, NEFF, GAGGENAU, BALAY, SIEMENS. Version raccourcie et simplifiée : permet de fixer de manière réversible une plinthe découpée dans un…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
Finger Brace (splint) Suitable for broken or dislocated middle segments and fingertips, or for post-surgery recovery of these body parts. When elongating the brace in the slicer (scaling it up in the longitudinal axis) so it extends to…
Wrist brace (splint) - a lighter version A lighter and less rigid brace, suitable rather for relieving pain caused by a sprained wrist or post-surgery recovery. Not suitable for fractures. Use undercast padding, fixated with velcro straps…
Finger extension brace (splint) Suitable for treatment of injured extensor in the fingertip (i.e. “mallet finger”). Total fixation period of 6 weeks. Also suitable for fractures of the fingertip, which lead to the same symptom - finger…
The base model is a size 10 and I went through and did test prints to get as close as I could to general ring sizes to make things easier for folks to print. You may need to adjust as you see fit for shrinkage and other things but as it…
Wrist brace (splint) for either hand A more rigid brace, suitable for broken wrist treatment, i.e. fracture of either the adjacent radial bone, ulnar bone, or wrist bones (excluding the scaphoid bone fracture, which requires fixation of…
This splint prints flat and can be easily molded to perfectly fit your wrist with a little heat (hot water, heat gun, oven, etc.). It is designed to comfortably immobilize your wrist, preventing ulnar and radial movement, while still…
This splint will help your dog or cat to recover of a limb injure. In order to produce it you will just need to print the provided file, and attach some velcro fasteners to it. In case you need to adapt any of its dimensions, I will also…
I injured my finger while climbing, so I designed this splinter to stabilise the finger for better recovery. It aims to stabilise the finger, so that tendons can recover. Please note that im no medical expert whatsoever, so please use…
Big toe brace (splint) Not suitable for walking! The brace is neither sturdy nor comfortable enough for that - only for fixation, but without stepping on the injured foot. For pain relief from non-dislocated fractures of the first or…
Useful for stabilizing knuckle joints. Note the designated sizes are finger diameter in mm, they are NOT ring sizes -- see https://en.wikipedia.org/wiki/Ring_size#International_standard to convert. Print instructions I've printed these in…
Finger splint I created to treat a mallet finger injury. Has a slight angulation to promote extension of the distal interphalangeal joint while healing. G-code is for PLA and includes removable supports.
This was a project for a familie member with finger arthritis were the splint.brace you can buy didn't fit like she wanted to. Printed with a Resin from Siraya tech mixture Tenacious / fast mix 1:6 STL-files “Brace 1,5 mm v3” is 45 mm…
Simple to print version
After overbending my thumb (Doctor thinks it was dislocated for a second, and some ligaments are damaged), i had to somehow stop it from doing the same movement again. After printing in PLA, you can heat the splint in boiling water and…
A splint designed for small birds, can change dimensions in the slicer to fit most bird legs. Put a small amount of fabric between the birds leg and the splint for a comfortable fit. I recommend using self adhesive bandages as they don't…
Simple print in place bobbycar trailer splint to prevent the trailer from disconnecting. No tools needed, only print them out and break the connection line between splint and secure bolt. Usage : Attach the splint, move the hinge, done.…
Easy to print, no supports needed.
This simple splint was designed to keep my right pinky finger straight while the tendon healed. Printed in PLA Meta 0.2mm layer height and a brim for support. I've included the STEP file to allow for customization. Sorry about you or your…
A workmate needed this for his childs ... he said it fits well I recommend you the flat lying version. Please share your prints! :)
PLA filament After printing you should shape it to the finger
Nothing like hurting yourself and needing a finger splint, only to find that commercial finger splints kinda suck. This finger splint was created for splinting the first knuckle, allowing for improved comfort and dexterity while your…
Adds 5/8" clearance to stock clips Somebody who made something similar: https://www.thingiverse.com/thing:1599265 Ikea: https://www.ikea.com/gb/en/p/metod-leg-40205599/ Category: Kitchen & Dining
I designed this for my middle finger that had pain in its PIP joint. The rough dimensions of my finger are labeled in the screenshot that I took (it says “m” for meters, but it's really mm for millimeters—Blender is weird). I recommend…
Splinter from Teenage Mutant Ninja Turtles.
made by Dr. Brett Carey and engineer Ben McCandless originally to benefit patients without health insurance. Measure the diameter and length of a patients wrist and re-size accordingly. Use the mirror function to turn this into a left…
A very slight modification of Heybulldog 's remix of Mushogenshin 's wonderful bust of the great Serbian (or American) inventor Nikola Tesla. Heybulldog used v3 for her remix, and so this is what mine is also based on. Thanks Heybulldog…
Add these wings to your track saw when cutting in a new splinter guard. The wings will let you get to the edge of your track to cut the entire new splinter guard. Can secure to your track with M3 screws. Countersunk screw holes in top if…
A collection of finger splints from approximate sizes 3 to 13.5 in increments of .5.
clip for PVC kitchen Plinth ( kick board ) f3d and step files are included clip2.stl is longer grab and little stronger gcode is 40x on bed with draft setting Print instructions standard profile no support is needed
Even if my physiotherapist said it's cool, it's not a certified medical device, but it worked for me. It's a light splinter that I designed for a jammed finger in order to avoid hitting stuff and feeling pain. It printed really fast, just…
When you suffer from arthrosis, like myself, a finger splint can bring some relief. But most splints in the market are ugly, stupid and way overpriced. Also: they come only in standard sizes and are far from comfortable. So I decided to…
I hurt my finger and I'm too cheap to buy a finger splint so I just modeled and printed one. this is to be taped on.
Ideally print in PETG rather than PLA for more elasticity, tree supports suggested.
This is a finger splint designed to prevent the last joint of your finger from bending. it is used for my mom's pinky after she cut her extension tendon. Skinfriendly tape is used to hold it in place. For my moms pinky I scaled it to 87%.…
Protection pour doigt, inspiré du modèle proposé par Mr. E Menace. Ajout de perforations latérales Augmentation de la protection au niveau de l'ongle Longeur 65 mm ; diamètre 26 mm
Just added a lip on the top surface of filimonic's anti-splinter device design for a more secure fit.
We needed our plinth to be higher than the standard 8 cm Ikea plinth. So we got a wooden plinth from another supplier. Only problem was that the clips that came with the Ikea plastic legs were sticking out 3-4 mm to far, so the plinth…
I use gloves size L. Use heat gun or hair dryer to soften the material and press to fit. Apply rubber bands or hair ties to hold in place as shown in the picures.
Purpose: This is a replacement for a Festool jigsaw splinter guard. Reference to original part: Festool article-no.: 490120 Fits to PS 300, PSB 300, PS(C) 400/420, PSB(C) 400/420 Comments: The splinter guard shown in the title was the…
*** Thanks for checking out this model! If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Recently I found myself singing: “I fought the saw and the..saw won. I fought the…
Eher kleines Modell für eine Fingerschiene. Sie kann in heissem Wasser weich gemacht und am Finger angepasst werden. Material: PLA Massive Schichten: 0 Konturen: 2 Schichthöhe: 0.15 Infill: 20% Füllmuster: Bienenwabe
I printed these in PLA. They are a bit hard to get on but stabilize well..
Made this as a demo for Boolean operations when teaching 3d printing
Finger splint. It needs some sort of tape to hold it tight on your finger, but that allows your finger to slide in easily to hopefully make it more comfortable. All the models uploaded are the same, but some people prefer different file…
Thank you bsurfn99 for your design! I have added a few holes to prevent moisture accumulation. I have also increased the length by 28% for the first try. The best fir for my finger was a X and Y scale of 125%, depending on the selected…
15% infill, no supports needed, layer hight 0.2, Prusament Galaxy Black PET-G used. Made by Hodinový Maker
I bashed my finger in a car door. I kept reharming it by using the finger. This thing goes over the end of the finger and reminds me not to use it, and also adds a little protection if I do. The ID is 17.7mm, and the inside length is…
This is a quick and simple print for the outer corner of the plinth´s of ikea method kitchens. Fits with friction, but can supported with some glue. Printing details Print with given orientation no supports needed Layer height 0.3
Makita 192557-6 Anti Splintering Device. Replacement of the original 192557-6 Makita part. Slicing note: Initial layer height : 0.1 mm Layer height : 0.1 mm Wall line count : 0 Infill : 100% STEP included. Version history 22.12.26.02 :…
box for dental braces or dental splint.
Transform your display with our 50mm round plinth, boasting a sleek angled lipped base and a hollow option featuring a 2mm inner wall. Its minimalist design adds a creative touch, enhancing the presentation of your model with effortless…
A simple splint to hold a finger straight.
Flat, easy printing splint for your Bobbycar. "Print in Place" My print settings: Nozzle size: 0.40mm Layer height: 0.20mm Material: PLA, better PETG Supports: No Infill: 20 % Perimeters: 4 Take a look at my other models. Happy printing 😉🐄
Allows you to extend the Ikea Metod plinth 3cm outwards. Helps to cover flooring that might be cut short, etc. If you found this you probably know what it is and what it's for! Will clip into the clips that came with the plinth.
This set of bracket and clip can be used to fix the plinth to your kitchen. Usually as a replacement. It is designed to replace my Hettich clip for the 35mm diameter leg. The supporting wall must be cut off at the clip before mounting.
German: Das ist der kleine Sicherungsstift für die Finne an einem SUP Paddel Board. Ich habe keine Möglichkeit zu testen ob es passt, da ich es für meinen Bruder erstellt habe. Also Maße vergleichen und testen! Er hat ein SUP der Marke…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Use double-sided sticky tape to attach model to plinth for painting and airbrushing. Extra wide base to prevent accidental tipping over.
Fingerschiene (Stacksche), damit es in Ihren Finger passt, müssen Sie die f3d-Datei möglicherweise in Fusion 360 laden. Die stl und 3mf wurden für meine eigenen Fingerabmessungen modelliert. Eine Fingerschiene für den vorübergehenden…
This is a remix from CHRJAN design which is for the left ring finger but I'm sure it could work for other fingers also. Changes: I needed my finger to not flex at the knuckle so I added a tab at the palm I also added a vent hole in the…
This is a great 3D scan of an ancient Roman marble plinth I found here: http://www.123dapp.com/catch/Roman-marble-plinth/2369229 It model has great quality, I only had to make a flat base by plane cutting and scaling the model up by using…
Microstomia can impede eating, speech, dental cares, and surgical procedures (intubation) and are a common issue after sustaining a face burn injury. The orthosis was originally designed by one occupational therapist and one physical…
Nothing fancy, but should print without supports and it has a cavity underneath to save on filament
EN A clip for holding fibreboard plinths to cabinet legs. CZ Úchyt dřevovláknitých soklů k nohám skřiněk.
Transform your display with our 50mm square plinth, boasting a sleek lipped base and a hollow option featuring a 2mm inner wall. Its minimalist design adds a creative touch, enhancing the presentation of your model with effortless…
A finger splint designed for printing and based on real 3d scanned finger data (from my friend). Intended primarily for the tips of fingers (distal phalanx, interphalangeal joint) so as to make writing painless by preventing outwards…
I dropped a chunk of concrete on my finger a while ago, which crushed it in a spectacularly painful way. I didn't want to go to a clinic just to be told to support it and avoid using the finger until it healed (there's not much you can do…
Universal Clip / Hook for Kitchen Clog - Hook Clip for Plastic Clog Feet and Aluminium Clog - Clip for kitchen base - Plinth Clip for kitchen legs - Gancio per zoccolino cucina - Molletta tamponamento cucina Resize/Scale to adjust…
I needed a new splinter guard and found some designs that did not quite fit. I also added an orientation arrow that can be seen from above. Fusion file is also added with variables to adjust. got inspired by this moddel:…
Description Custom modelled splint (fixture) for broken thumb. Fixes the last phalanx and knuckle, while doesnt restrict its movement in the big knuckle near Your palm. There are two models - normal and one called “wider” for bigger…
Finger splint. Fits an inflamed middle finger. Size can be readjusted in the slicer. Don't forget to turn on the “generate supports” in your slicer (I used Organic tree with support on plate only)
This is a clip for my Siematic kitchen plinth. Probably it will fit for other manufacturers to. I printed it with 2 extruders on my XL using PLA as a support material and PETG for the print itself. It's not as pretty as the original but…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TMNT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com Rate, 🟠like & comment Inner peace doesn’t pay for pizza night! There are…
The Figure of of 8 / Oval 8 splint provides stability and support for finger joints affected by conditions like swan neck deformity, boutonniere deformity, mallet finger, trigger finger, arthritis, lateral deviation, and hypermobility.…
Made a simple case with magnetic closing mechanism for a dental splint/bite-guard. Inside heightspace is 16mm. I used a large paperclip as a hinge connector, just bend it straight and push it in. Stop the print at 9.80mm height and insert…
Update 18.03.2024: Added custom versions of the model with left and right nuts, allowing printing with minimal support. Fixing knob is here https://www.printables.com/model/384802-festool-bolt-knob Printer brand: Flying Bear Printer:…
This was printed in ABS its designed with 2 slots for 1/4in Velecro strips to hold it on the duck's foot.
Deux choix de fixation disponible - Two choices of mounting available.
A remix. I changed the name in cyrillic letters. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 5% Filament: bq PLA White Category: Sculptures
This is a splint to immobilize and elbow at 90 degrees. The arm cups are 80mm in diameter and will accommodate a petite woman or child if the arm is swollen. Secure the brace to the upper arm and lower arm with ACE bandage or any…
REHAU Abdeckkappe (RECHTS) - kitchen plinth da ich keine passende Ersatzteile gefunden habe, wurde halt mal ein Teil konstruiert ;-) Falls jemand eine LINKE benötigt, einfach über Z-Spiegeln since I didn't find any suitable spare parts, a…
Mounting clip for P Reardon's 30mm kickboard clip. Not much to say really. If you need it you need it. Recommend printing in PETG at 0.2mm or 0.25mm My makes were done on Prusa Core One, with 0.6 HF Obxidian nozzle at 0.25 layer height.…
BIG Pedal Tractor - Pin This is a easy to print Pin for BIG Pedal Tractors. The pin diameter measures 19mm. For me, it fits perfectly, but better is to check the hole before printing. Info: Printing files from the drawbar in the picture…
Screw-on clips for attaching kickboards to cabinet legs. I liked the design of the original but extended it to a distance of 23mm to suit generic plinth legs available in Australia. Printed in PLA.
The default plinth joiner piece for the IKEA METOD system was tiny and easily knocked off while vacuuming and eventually lost and does not cover gaps. Designed a new piece using the joiner nubs for the original plinth end cap pieces and…
A more comfortable splint than the one the ER sent me home with. Splint was needed to prevent bending of the nuckle and tearing the stiches Found straight splint made finger very stiff, added a curve to match the natural resting bend of…
My youngest child broke the proximal phalanx on his fourth digit and the splint provided by the clinic was essentially a plastic popsicle stick with foam attached. The foam became instantly dirty and began to fall apart, so I wanted to…
Obviously, you need to seek medical advice to make sure something worse isn't wrong with your finger, they'll probably put your finger in a splint anyway, saving you some filament and giving you some peace of mind. Designed to hold a…
