Liczymy pasujące modele…
Our Github - updated files and firmware Our Website - Store and general info about us and our goals. ---------------------------------------------------------------------------------------------------------------- During this quarantine…
Wydruk około 5,26 €–6,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A mount for a pen plotter for the MK3s. Designed to snugly cover the Extruder motor, and can hold a pen of diameter up to 12mm. Will take 2x M3 Bolts/Square Nuts to lock the pen in place, and 2x M3 bolts/square nuts to hold the cover to…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
This holder is an exact match to the original. It is compatible with HP DesignJet T1300 plotters.
Wydruk około 6,39 €–7,81 € nettoWstępna wycena jednego wariantu
Checkout my improved solution! Features No additional hardware needed A G2 pen and filament are all you need. Install and forget Flexibly switch between plotting and 3D printing without removal of the attachment. Tool free design Slide in…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A pen holder attachment for the Creality Ender 3 that allows it to function as a plotter. Includes an adjustment screw to accommodate various pen diameters (8-13mm). Model can be installed as-is, no additional fasteners or springs…
Wydruk około 0,22 €–0,26 € nettoWstępna wycena jednego wariantu
I've made a few updates to the great plotter model to reduce some of the hardware requirements and make it easier to add/remove from the printer. In addition, I added a few tabs to ensure proper routing of the rubber band to ensure it…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Always wanted to try plotter attachment, but I decided to make my own with few specific features in mind: High rigidity and good precision of lines. Spring loaded, so it provides more or less consistent force. And it works fine in case…
Wydruk około 0,22 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since I was writing a lot of cristmas cards I upgraded my MK3s+ to a plotter with removable pen heads. Now I can draw up anything, convert it to gcode and have my printer draw it perfectly over and over again. The upgrade requires no…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Print on the U shaped face so that the layer lines are perpendicular to the inner sliding parts. The extra holes on top are to use springs instead of a rubber band. Simply use a 3x30mm screw and a connector to push the inner down.
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to make a simple and high quality CNC drawing machine to draw on almost anything. I'll step you through how to build your own…
DD-SM Mount I created this mount to have the motor and extruder as close as possible to the X gantry bracket to not have the weight of the motor hanging a long way away from the metal bracket. This mount is very rigid, there is no droop…
Always make sure you are using high quality eye protection and ventilation while working with lasers. Eye protection is very important! https://github.com/Adamslab/SimpleEngraver This is a 3D printable frame for a simple 2-axis laser…
The screw used in the picture is a 30mm m5
Yet another sprite extruder pen plotter attachment
This is a custom pen holder head designed to replace the standard extruder of the Easythreed K10, transforming it into a cute and functional pen plotter! Whether you're plotting art, drawing text, or just having fun with gcode-controlled…
This pen plotter addon to the Creality Ender 3 v2 consists of a bracket that bolts onto the existing M3 threaded holes on the hot end bracket for mounting the BLtouch sensor and a pen holder that uses a 3d printed M6 screw to hold the pen…
I stumbled across this design and thoght it might be useful. Comparable to models that can be found on Amazon , but i mean, we really want to print it.
I wanted to draw with my 3d printer because i suck at drawing, so i designed this pen plotter for the neptune 4 and neptune 4 pro (potentially the neptune 4 plus and max aswell havent tested it tho) for assembly you need: 4x 5x5…
I’ve designed a little pen-plotter with the goal to create a plotter that consist mostly of 3d-printed parts, is cheap to build and foldable for storage. The plotsize is about 12cm x 12 cm See it in action!…
I found that the mount by Fizzy Chickens needed a little more material around the back of the screw hole. The bolt that came with my printer was bottoming out so I added a small collar around the hole too. Deleted the extra bit opposite…
Remixed from 3D printer multi-function/ Imprimante 3d Multi-fonction by HelioxLab Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Category: 3D Printer Parts
This is a simple penholder for your Prusa i3 mk2s printer. It will convert it into a fully functional Pen plotter without disassembling anything. The Slic3r settings are given. (See the PenPloter_Slic3r_Config.ini and config_Bundle files)…
CR-10 V2 / V3 Pen plotter attachment. Remixed from my universal mount that clips onto the face of any stock CR-10 V2 / V3 it comes on and off in seconds, ideal for a pen plotter the pen is secured with a M3 screw and bolt the plotter is…
I got the etsy made root upgrade pieces, but the corvid plots didn't come with a bomb token or covers. I think the intent was to use the cardboard pieces, then replace them with the plastic pieces once flipped. I prefer using the covers…
The Pen Holder consists of three models - Base Bracket, Slide Holder, and Stopper. You can 3D print Slide Holder and Stopper in place - refer to the photo attached. Merit of this pen holder: Easy to make - the Pen Holder doesn't need any…
Slip this on a Sharpie Fine Point pen (aka: a "normal" Sharpie) to use it in a standard pen plotter. Note that regular Sharpies are too long to fit in a carousel-style pen holder. I'll look into updating this for mini-Sharpies eventually.…
I used the idea of the dovetail rails and designed a low profile holder that does not impede normal printing. I use this in conjunction with a python script I wrote as a school project that turns SVG files into GCODE but you can just…
this work in progress is a mix of https://www.thingiverse.com/thing:4559133 and https://www.thingiverse.com/thing:4545252 as I have the bl-touch original plate installed so I had to adapt the pen holder Print Settings Printer Brand:…
Pen plotter for Kingroon KLP1 New 2025 W.I.P. Pen plotter for klp1 210 https://www.printables.com/model/1354295-klp1-210-pen-plotter-revamped-wip Can fit any printer with 3010 fan close to the extruder! Tutorial inside the zip file!
A mount that I designed for my Anycubic Kobra Neo in order to mount a pen to it so I could use it to draw.
A tiny versatile ender 3 plotter toolhead to hold markers pens and pencils! It does need improvement, and I will work on it eventually! Don't judge me on what it drew, I'm not good when it comes to software!
This is the front part of the CNC pen plotter shown in the pictures. Please refer to the YouTube video for seeing the design in action. It uses a 9g Servo to move a pen up and down. Pen is fixed with two cable ties. In the middle I used…
HP7475A plotter pens are meanwhile unobtainium. So I made a replacement based on an available refill cartridge for a ballpoint pen (Schneider Universal 852), available at your stationary's or Amazon. See enclosed PDF (other files) for…
This is a pen plotter attachment for any printers that use the Ender 3 e plate. Loosen the bolt that is holding the roller, slide the bracket on to the plate and tighten. Simple mechanism, no explanation needed. Support: Only needed in…
This is a pen plotter attachement specifically made for use with a BIC standart ballpoint pen and the Ender 3 V3 SE . Needed Parts and Tools: Parts of the 3D model itself. BIC Standart Ballpoint Pen 1 Metal Spring with properties such as…
Holder for larger Pens. Usable on all Printers with a Nema 17 Stepper Motor. Use M4 Screws to tighten the Pen Happy Printing
Drawbot (XY Plotter) X-Axis Carriage & Pen Lift Mechanism (Linear Actuator) more info here soon I used the servo gear and "rack" gear elements from artichoke's "Linear actuator for mini servo (11-20gr)" design found here…
I didn't find any .step files of the HP small plotter pens and all of the available shared .stl files were less accurate and without the inner surfaces. Hopefully this is useful to others, but i mainly put it here for my future self.
I tried another pen plotter and did not like it because it interfered with my fan setup and was not completely solid when drawing. This design is solid and has the ability to use multiple pen sizes. It does not interfere with anything on…
Hello there. I made a mod for my broken Mega Zero 3d printer. This mod will give your old Mega Zero (v1) printer a new life. This will convert one into a Pen Plotter. I removed the hot-end, fan, and other things that generated heat and…
This is only pen holder for original Prusa Mini Plotter Addon V2 . How to use pen plotter If you miss information how to create your first drawing, look here: Prusa Mini Pen Plotter . With my penholder you can use 2 mm more space. You can…
Aria Art Plotter - NOW Fully Open Source CNC Drawing Machine Build a professional-grade art plotter for ~$600 in parts The Aria Art Plotter is a fully open-source CNC drawing machine with a 20 x 20 inch, (500mm × 500mm) drawing area and…
CNC PLOTTER I built a printer using motors I salvaged from CD drives and parts I designed myself and printed on a 3D printer. The printer is driven by an Arduino Uno development board. It is compatible with every computer and made for…
This is an adapter to let you use an Eddings 1300, Faber Castell Pitt Artist pen, or other 9mm diameter pen. The Felt Tip Holder screws onto the part but must be unscrewed to recap the pens. The Snap Base and Snap Plotter work together -…
A very quick project : print the two parts in fiew minutes, add a M3 screw to lock the pen, and have fun ! It's probably the fastest mod you can add to your printer. If you use a glass plate for printing, remove it, so you won't need to…
Print with the same setting as the E3CNCE3CNC Can work from a Bic up-to a Sharpie. Required 2 x 5mm brass heated inserts 2 x 25x5mm bolts
I modified how my HP Plotter T650 feeds paper into the plotter. I find that buying larger bulk paper costs a lot less. In order to do so, I bought a couple closet pole angle irons and a hollow metal pipe suspended between the two. Both…
A simple remix to allow the Tronxy X5Sa to become a pen plotter. Simply clip the adapter to the back side of print head (in the plate where the gt2 belt attaches to). Use one of the pen holders in the original thing (…
Makeblock Drawbot (XY Plotter) Pen Holder revision 2 (more info here soon) Category: Art Tools
To be able to use my 3D printer as a plotter cutter also, I created a simple mount for a basic cheap Chinese plotter blade. These can be bought for a few bucks and come with lots of replacement blades with different edge angles. I bought…
Fits over an empty extruder mount. This will not work with both extruders. Still working on a simpler image/sketch to gcode process, will update with those details shortly. In action: https://www.youtube.com/watch?v=ebXGa1y9DEg 2x 12mm M3…
This is my creation for a an plotting knife holder combinied with a cooling duct. It works well for me at the Geeetech A20T and what i have seen at the pictures of the other Geeetech printers it shoult work with some other too. Here is my…
Pen plotter mod for E3d Titan Aero Installation: Remove extruder fan Attach the pen holder to the heatsink usnig the screws from the fan Secure the pen with M6 screw and nut Maximum pen width - 15mm Added .STEP file if someone wants to…
This is a pen plotter module that you can use mounting on bltouch mount You can use it while using the normal 3d printer mode (since the mount is higher then the nozzle
Simple plotter head for TAZ6 (and maybe other versions too). The "v1" design is loosely based Tech2C's "over-engineered" plotter design for the Hypercube printer (also here on thingiverse ). I basically re-used his pen holding cart…
plug with wire holder for plotter HP T2500
This model is a holder for Nextion TFT 7.0 Inch display with enclosure. It can be Nextion Basic, Enhanced or Intelligent model, but the holder is compatible only with 7.0 Inch displays with enclosure. The display could be used for…
These EXPO fine point dry erase pen compatible parts are for use with smily77's "v2 version" of the plot clock / thermometer: https://www.thingiverse.com/thing:371248 Actually it's technically not a remix rather than a redesign, since the…
Holds blades, the blade boxes for most brands, blade mount, and sheet cut blades for Roland printers & plotters, both a version with a small tray for old blades, and one without.
Two simple adapters (straight & 45°) to connect standard plotter cardboard tubes. Perfect for upcycling and crafting. They fit snugly into common plotter tubes. Just print, insert, and start building.
This is a remixed version of a pen holder designed for plotter and drawing machines. Since I couldn't find a MK2 variant and really wanted one, this is the result :) For the rest of the parts (e.g. pen inserts, calibration tool) look at…
This is a remix based on my Expo fine point parts, intended to fit the larger chisel style Expo dry erase markers. To use this you will need to print the rest of the parts for a plot clock. I liked smily77's "V2" arms and PIR mount:…
I liked the plot clock body designed by stylesuxx, but I needed to add some holes for the temp sensor and power cable. To use this, you'll have to print the covers and servo housing from stylesuxx here:…
3DP MakeBlock XYP (plotter/drawbot) full upgrade. http://www.makeblock.cc/xy-plotter-robot-kit/ I wasn't happy with the carriage design of the MakeBlock XY Plotter (drawbot) so I took it upon myself to redesign the X & Y axis carriages…
This is a solution for cable management for CNC machines and laser engraver. It uses a zip tie and 3D printed part that can go on t-slots and v-slots sizes 2020 and up.
Plotter mod mount for Ender 3 neo v1. Mounting with M3 10mm screws. Requires to tap M3 threads for the pen locking. For coushining screw in only the bottom. Max pen diameter 9mm. For best performance print at 45 or 60 degree, but…
Cushioned pen mount that screws to the side of the head casing of a Neptune 4 printer with its standard screw for plotting. No extra hardware required. Assembling and mounting the contraption is rather simple: Once you print all the…
This 65 mm adapter allows multiple pens in a CNC machine. Will require: 6 x LM8UU bearing M5 screw and nut 3 x 8 mm rods
I often want to trace the exact toolpath before routing or carving, especially for complex curved shapes where aligning to a reference point is not possible. The model this was remixed from required more hardware and the hole for the pen…
v4 Makeblock XY Plotter feet (drawbot) no longer require the metal plate for mounting to the XY plotter frame. Plus these are adjustable height. For use with M3 nuts so the bot may be secured to a platform (2' x 2' MDF wood in my case)…
Feet for the Makeblock drawbot (XY plotter) for use with 3mm t-nuts so the bot may be secured to a platform (2' x 2' MDF wood in my case) the bot can be stored on the wall plus I plan a few mods for my Makeblock drawbot (xy plotter) I…
I build a Mural whiteboard plotter (https://getmural.me/), which is intended to have the belts hanging off of thumb tacks. I wanted to use it on a white board so I designed a mount that would sit on the corners of the white board. The…
As always, it's the small things that decide about usability. For my recently acquired old HP7475 plotter from the 80s, the rubber wheels to move the paper vertically were dried out and had no longer enough grip. Also, the Geneva drive…
De série, el plotter de la marca TwoTrees, del modelo de 10W, trae de série al lado de la salida del laser, un conector para enchufarle un tubo de impulsión de aire, el cual, a diferéncia de otros modelos de plotters es demasiado…
shige-ruuu様のプロッタペンケースを保存する際にインクの乾燥抑止を目的としたペン先保護のふたを作成しました。 本体は次のページからダウンロードできます。 https://booth.pm/ja/items/5974277
First: A Warning This plotter was designed for a specific event, as it is the only thing it can draw is “BS5” so if you want it to do anything else you will have to make the cams and you should not assume that this will be easy If you…
Ive printed all the parts with 10% infill and only used 4 of the 6 screw mounts. You will need m3 screws and preferably also m3 nuts. The spring can be activated by using a normal household rubberband. Here is a small demonstration video…
Use an M4 screw to set the correct clearance for the pen.
Replaces printer toolhead with a mount for a pen to use your printer as a plotter. Print parts in the provided orientations. This is intended to be printed with 0.2mm layer lines, though you can go finer. Parts should be printed in the…
Checkout my improved solution! Features No additional hardware needed A G2 pen and filament are all you need. Install and forget Flexibly switch between plotting and 3D printing without removal of the attachment. Tool free design Slide in…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ender 3 Briss fang Gen2 - Plotter AttachmentEnder 3 Briss fang Gen2 - Plotter Attachment A pen holder designed to slot into one of the side rails of the Briss Fang (Gen 2) for an Ender 3A pen holder designed to slot into one of the side…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
De série, el plotter de la marca TwoTrees, del modelo de 10W, trae de série al lado de la salida del laser, un conector para enchufarle un tubo de impulsión de aire, el cual, a diferéncia de otros modelos de plotters es demasiado…
This is a clip-on plotter mount designed specifically for the Ender 3 V2 that allows you to add a pen/plotter attachment without interfering with the hot end assembly, CR Touch, or BL Touch. Most existing plotter mounts assume a stock hot…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
It provides greater precision and enhanced rigidity to the Y-axis, resulting in improved stability and more accurate
This is a remixed version of a pen holder designed for plotter and drawing machines. The main improvement in this remix is the addition of a universal mounting interface with a 32×32 mm square pattern , featuring M3 screw holes at each…
@PendingProgress' collet is fantastic, but I wanted a few different collet sizes (one larger, two smaller)
Plotter mod mount for Ender 3 neo v1. Mounting with M3 10mm screws. Requires to tap M3 threads for the pen locking. For coushining screw in only the bottom. Max pen diameter 9mm. For best performance print at 45 or 60 degree, but…
Ladil jsem filament PET-G od NEBULY. Rozsáhlejší stupnice pro větší škálu filamentů.
This is a remixed version of a pen holder designed for plotter and drawing machines. Since I couldn't find a MK2 variant and really wanted one, this is the result :) For the rest of the parts (e.g. pen inserts, calibration tool) look at…
CNC PLOTTER I built a printer using motors I salvaged from CD drives and parts I designed myself and printed on a 3D printer. The printer is driven by an Arduino Uno development board. It is compatible with every computer and made for…
Always wanted to try plotter attachment, but I decided to make my own with few specific features in mind: High rigidity and good precision of lines. Spring loaded, so it provides more or less consistent force. And it works fine in case…
Wydruk około 0,22 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holds blades, the blade boxes for most brands, blade mount, and sheet cut blades for Roland printers & plotters, both a version with a small tray for old blades, and one without.
2026年4月現在、ダイソーで入手できる4色ボールペンのペン先の太さがΦ2.4mmに代わっており、shige-ruuu様提供のふた(穴の部分がΦ2.2mm)だと取り付けができなくなっています。 この問題を解消するために、ふたの穴をΦ2.4mmに拡張したものを用意しました。
shige-ruuu様のプロッタペンケースを保存する際にインクの乾燥抑止を目的としたペン先保護のふたを作成しました。 本体は次のページからダウンロードできます。 https://booth.pm/ja/items/5974277
Uses four 10mm magnets. I put a strip of electrical tape on the back to give it a little stick-tion to the side of the extruder.
![Pen Plotter upgrade [WIP]](https://media.printables.com/media/prints/92029/images/955835_b32973b6-71f0-43a0-b319-577a37e7d3c0/pen-plotter-upgrade-prusa-i3-mk3s-v7.png)
