Liczymy pasujące modele…
I could not find a scraper sporting a hex pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…
HUGE UPDATE 9/13/2024: Dummy 13 v1.0 is now available! Check out the new and improved version of Dummy 13 here. This page will keep the previous beta files to ensure that no one's remixes are broken. Dummy 13 uses a CC BY 4.0 license!…
New version of the wallet available here Update 04/08/2022 : I changed the tolerances, it should now be less tight for the cards. I also made a little change to prevent the last card from going behind the mechanism. These updates are only…
Lucky 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
I decided to modify my previous model (5 in 1) Fidget Toy Spinner I wanted to get rid of the bearing and make the whole fidget smaller to fit the keys well. And as a bonus, I modified the model for print in place. So just print and click…
This is a collapsing Katana sword designed to be printed as one part. Its only 182mm high when printed but expands to over 825mm in total length! The Replaceable Single Edged Curved Blade Version is available to my Clubs members. Supports…
All printable parts for your Original Prusa i3 MK3S+ Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide. Attention,…
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…
This collapsing Katana is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
Mini 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
This version of the Drill Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This print was a request from someone, I figured why the heck not? I honestly learned a lot through the design and print of this one about clearance dimensions required for 3D printing without having the layers stick together between…
This phone/tablet stand is designed to be as universal as possible, print in place, and fold flat while being very durable. It comes in 3 sizes. Each variant is designed around its specific load. Small - 52x83x3mm - About the size of a…
Official Remix "Extra Size Cat" is released!! https://www.printables.com/model/1146999-official-remix-flexi-extra-size-cat-print-in-place Since there were many requests for longer cat, I decided to release it as an Official Remix. This…
This is a collapsing Lightsaber designed to be printed as one part. Its only 205mm high when printed but expands to over 950mm in total length! Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
TRAILER An elegant bag clip designed to be printed in place as one piece with minimal supports. Once printed, the clip is freed into 3 hinged components. The design uses a specially designed cam to give the user a mechanical advantage and…
If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…
Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication. I use…
Hi Everyone: I originally posted this design for a fast-printing modular drawer system on Thingiverse, but quite a few people suggested that I also post it Printables (I can see why. Printables runs so much smoother and the support is…
Taking inspiration from my original fidget toggle switch , I designed a print-in-place version that uses about 8 grams of filament and takes about 20 minutes to print on my X1C. This model is experimental (it's definitely still a…
All printable parts for your Original Prusa MK4 and Original Prusa MK3.9. MK4/MK3.9 upgrade Stage 1: Read the manual first! Don't disassemble the printer for now, follow the instructions provided in the manual. Original Prusa MK4 assembly…
Phone holder allows for fine control of tilt. Probably overkill for some uses, but think this might be useful for video chat or work conferences where you want to get the camera angle just right. Link to adjustment demo GIF:…
Projectvideo: https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of…
I designed this to expand on the “rings inside of rings” idea, and it gives this fidget a really interesting look and feel. It took six iterations to tune the tolerances, but the final version works great! Just give the model a few spins…
This is a tool that does an excellent job at cleaning your rod. It clamps snugly on the 8mm 3D printer or CNC leadscrew, you can remove your hands and let the printer do the rest of the work. This is meant to be used on any printer with a…
Two versions are included: Textured gears Smooth gears Fully print-in-place – no assembly required. Also available with keychain holes. Tip: When removing the plate from the print bed, flex it gently. Pulling too hard may damage the…
All printable parts for your Original Prusa MMU3. Before you start printing please read the instructions carefully. Depending on the option selected, you either receive all printed parts from Prusa or you have to print them yourself.…
I was interested in printing the Dummy 13 but found that without the runners found on the Easy/Mini I had a hard time getting the parts to stick. I realize that the parts are “Beta” and @soozafone plans to make runners eventually but I…
A compact and satisfying G26-style fidget keychain featuring a smooth, functional sliding top. Designed for stress relief, display, or everyday carry, this mini model keeps the iconic look while staying completely safe, non-functional,…
Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)
A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…
Here is my take on the tensegrity table, a print in place version ! To tension the mechanism, turn the little nobs in the center using pliers I recommend printing the file with built-in support, they are very easy to remove Printed fine…
This is a very common tool in the DIY world, its main purpose is to hold objects. Without the need to use springs, this clamp has a design designed to be printed in place and ready to come out of the printer (or almost ready, you will…
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
All printable parts for your Original Prusa MINI+ Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide. Compatibility:…
This is a collapsing sword designed to be printed as one part. Its only 140mm high when printed but expands to over 860mm in total length! This version of the Jian prints complete all as one part. The Replaceable Blade Version is…
🔥 NEW 2025 DESIGN AVAILABLE: The official, newly improved version of the Dino-Clip is now available for download on Etsy ! It features an updated Dinosaur design, improved strength, and flawless break-away support removal. The new…
If you can successfully print this with NOTHING attaching the rings together, then you should be able to successfully print the print-in-place version or the blades concentrically. There is a new “clearance” test print, you can find here…
Hi everyone, the Controller is designed to be printed standing up without supports. There is a bit of postprocessing required to remove the custom supports for the Trigger button flexure. Enjoy printing
You'll find all the build instructions and links for components in the article: https://blog.prusa3d.com/the-prusacaster-how-to-design-and-3d-print-an-electric-guitar_71962/ Overview of the multiple pieces: Hardware Made to work perfectly…
This version of the Master Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This is a working cannon. It has a spring to shoot cannon balls. Use the hinge to aim precisely. Print as many cannon balls (included) as you need or shoot paper balls, peas, etc. Print it as a toy for your kids, grandkids, or present it…
I needed to model something in Creo as part of an additive manufacturing class. So I decided to blow everyone else's models out of the water with my fully print-in-place planetary gear toy. I spent a grand total of 4 days researching gear…
Nothing more than a square, 0.2mm high so it prints a single layer. I use this for setting the Z offset. The printer's own Z offset calibration is a good start, but it can be a challenge to get the height just right if you haven't done it…
I would like to present you version 2.0 of the design. I received some feedback from several users after they printed my previous design version, thank you for that! this has given me new insights for expansion and improvements of the…
Rubber band gun thing: Something i was planning to finish for a while but had been stuck on my hard drive for too long, It's a pretty simple design with an escape mechanism that shoots rubber bands when you pull the trigger. UPDATES : Feb…
Print in place small bearing set: https://www.printables.com/model/542689-print-in-place-small-bearings Print in place BALL bearing set: https://www.printables.com/cs/model/583731-print-in-place-ball-bearings Thanks, 3Dprintsmith for his…
About the Scrapers: With a length of 86 mm and a thickness of 5 mm, the scrapers are very compact. The grooves on the side of the handle provide a firm grip. The angle of the front wedge is 26.6° and is therefore quite robust. Of course…
Easy 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
🎨Try KOGI LAB for free at kogilab.com ! Print in Place Fully Articulated Skeleton Hand License Notice: This model is free for personal, non-commercial use only. If you'd like to sell physical prints or monetize it in any way, please visit…
[Update] ---2024/02/07--- Straight type is now available. ---2024/05/07--- Free 3mf file released!! If you want to make multiple prints, use various 3mf for Bambu and Prusa. ---2026/05/06--- Fixed an issue where the limb segments of the…
Have fun with this fidget ring! I uploaded many sizes (inner diameter in mm from 12.3mm for kids to 24mm for big fingers, please use the conversion table below in case you are used to your local ring sizes and use the closest value in…
🎨Try KOGI LAB for free at kogilab.com ! Print in Place Articulated Flexy Chameleon Hey everyone! A fun 3D printable chameleon that you can place on your desk, shelf, or anywhere you like. Designed as a simple one-piece model, easy to…
🎨Try KOGI LAB for free at kogilab.com ! Print in Place Articulated Flexy Snake Hello, I’m excited to share this articulated snake model, the design is fully articulated, so it moves just like a real snake – perfect for desk toys,…
A 100% 3D printed Smartphone-holder-arm that offers, at least, three axes. And the option of double braces between the axes. In the standard configuration, the arm easily supports around 500 grams in any position. The versatility of this…
Motor Fidget A smooth, print-in-place motor fidget designed for endless spinning satisfaction. No assembly required — just remove the small support block after printing and start spinning! Perfect for relaxation, focus, or keeping your…
This collapsing dagger is designed to be printed as one part. Its only 130mm high when printed and the blade extends to 260mm long! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
This clip is actually a working zipper with rows of little fingers to cinch your bag shut. It does require some assembly. OK, the work required for this bag clip is way more than any bag clip should require, but once assembled, you'll…
Description All printable parts for your Original Prusa MK4S and Original Prusa MK3.9S. Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTURAL Filament: PETG (tested on…
MODEL DETAILS This is a Halloween-themed model that is designed to stress test your 3D Printer. You won't need supports, but you will need excellent bridging! Keep an eye on this one as it's printing, there's lots that can go wrong 😉 If…
How long can you go... New Toy with options 3, 4, 5, 8 or 10 arms long. Print in Place so You Print & Play. Use a 3, 4 or 5 arm for a working toy. The 8 and 10 arms has too much friction wh printing with PLA TIP: Needs a tiny bit of…
Original model was good, except for the hinge, it's a perfect candidate for printing in place. That's my first print in place model, so any hints, makes, comments are very appreciated! Print settings PLA 0.2 height 3 perimeters 30% infill…
All printable parts for your Original Prusa i3 MK3S. Note these are the parts for the older MK3S version, not the newer MK3S+! Some of the parts are not compatible! For MK3S+ parts, see the respective printable parts. Attention,…
It's a fully printed, pocket size crossbow Have fun! don't hurt anyone How to make it print the file kitcard_crossbow.stl seperate all the parts (maybe using a small wire cutter) take the part with the R and put the pins in connect the…
History of the miniature vice This is the completely reworked version 2.0 of my very popular miniature vise, which is much easier to assemble now. Around Christmas 2020, I had published the first version of my miniature vise here:…
Fully 3d printed crocs shoes “CrocsL/R” and “Holder” printed with Overture TPU ( https://amzn.to/40n8I0D) (390 g) for the shoes I used: 2 walls 15% infill (gyroid) for the holder 2 walls 5% infill (monotonic) “Mount1/2” printed with PLA…
Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…
MakerBot's T-Rex Skeleton is a masterpiece. Too bad MakerBot has ignored fans' long-time cry to fix some obvious and critical issues. Thus I made the following fixes to make the model printable: --I fixed tail parts A and B. Tail part A…
Stretchy Springy Ghost Toys STL files included for three ghosts: (1)Big Ghost (2)Medium Ghost (3)Baby Ghost Dimensions of Big Ghost: 3 in. x 2.5 in. Dimensions of Medium Ghost: 2.5 in. x 1.5 in. Dimensions of Baby Ghost: 1.5 in.x 1.25in.…
Using TheBrokenNerd83's design ( https://www.thingiverse.com/thing:3578797 ), I printed the helmet in different sizes and tried to use as little support structure as possible. I share my experience with you in the video. This Video shows…
🦊 Flexi Fox – cute articulated 3D model, prints in one piece and moves smoothly! ✨ Perfect for any collection or gift. 💼 Get all models + commercial license on Patreon 👉 patreon.com/c/FlexiMania_
Edit: Thank you for 15.000 Downloads! I've made a 2025 Update of the model! You can download Fünther here! I wanted to make a Flexi Dinosaur since I first saw the Flexi Rex. As my son had his birthday last week I decided this would be the…
This is Version II of the Rocket Launcher , with a much more reliable trigger mechanism which should stop any lockup for most people, and general smoothness of the action. Massive thank you to AKinferno for helping me with all the test…
Print in Place Stackable USB Cable Winder. Both smooth sided as well as knurled. Also include code for Color Change Print. Inspired by https://www.prusaprinters.org/prints/55627-cable-puck-print-in-place-cable-management Print…
As of February 14, 2025, the 3DBenchy model has been released into the public domain. For more details, please visit the link below: https://www.3dbenchy.com/3dbenchy-sets-sail-into-the-public-domain/ #3DBenchy is a 3D model designed by…
All printable parts for upgrading your MK3S to MK3S+ Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the brackets in the file description. the…
This is an updated version of my redesign of emmet's totally mind-blowing print-in-place iris box (sadly, the link on Thingiverse to his original design seems to be dead). My original design lacked a locking mechanism to keep it from…
Just when you thought that every possible way of calibrating your printer had been created, an entirely novel and unique method arrives! This isn't it, though. This claims to be neither novel nor unique, and is instead a cover version of…
I made a new version with a stronger hinge and parametric source files. Check it out! Origin story I needed a bag clip for my cat food but couldn't find one that would last more than a week. The problem was that the existing ones had some…
Author: Prusa Research (Vlado Turek)
[Update] ---2025/01/21--- Ultra size cat released!! It is about twice as long as Extra size and looks like a dragon, so looong! This is a super long version of “Flexi Holding Cat” which was previously released. Since there were many…
Usually when printing objects they talk about walls and filling, but I made a structure without walls, without filling, and also without a bottom and a cover. There are only bridges that connect and lean on each other. The peculiarity of…
V2 IS HERE: https://www.printables.com/model/1152427-openvessel-20-a-practical-3d-printing-benchmark Introducing OpenVessel , a model designed from scratch to embody the true spirit of 3D printing: freedom, openness, and community.…
Intro A super-mini but surprisingly loud whistle for your keyring! Print a few of them and give them to your friends as emergency whistle . ❤ Only 5min print time with Prusa MK4/MK4s or Core One (other printers maybe take longer time)…
Print info Nozzle: 0.4 mm Infill: 0% Supports: I use Snug supports, need to be painted like on the picture below Model Overview Two versions of Cats: Normal (white one) , Fluffy face (black one). Made bumps on face and paws so its easy to…
Probably the most popular filament sample on Printables comes with a set of storage boxes in various sizes, 100% printable! I designed the box so that you don't need any additional parts, no screws, no magnets. There are two different…
This printable side-release snap buckle has been designed so that both sides print flat on the print bed, which allows the layer lines to be optimally oriented to create an impressively strong functional buckle. Carefully designed so that…
All printable parts for your Original Prusa XL . The parts are divided into folders based on subassemblies. Print instructions ATTENTION: Two materials (PETG and Polycarbonate) are recommended for the printable parts. Read the following…
All printable parts for your Original Prusa Enclosure . The parts are divided into folders as they arrive in the multiple bags from the factory. In file others you can find part needed for the Silver PSU. All of the add-ons and community…
This project has been designed in collaboration with BuildBee, the all-in-one 3D printing solution to design, monitor and print from the cloud. Learn more about BuildBee: https://buildbee.com/flowalistik The Maker Wallet is a fully 3D…
Simple functional M5 hexagonal nut and bolt Nut is scaled to 105% from ISO4032 Bold is scaled to 95% from ISO4014 Perfectly functional 3D print. Print instructions Parts Summary Simple functional M5 hexagonal nut and bolt Nut is scaled to…
These boxes are specially designed to be printed really fast and also to have as many holes as possible to let the wet air reach the silica-gel inside. The screw cap is an easy and durable way to close the box and also open it again to…
I'm really glad to present you the Glorious Baby Dragon For these Models I've used High Gloss PLA ColorMorph Filament made by Formfutura . That was the first time I used this Filament and the results are marvelous, I love it! Use the Code…
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
Copyright Notice ⚠ WARNING This design is an original work by the creator and is protected under the Creative Commons 4.0 International License. Unauthorized reposting, claiming authorship, or distributing this model or its images—whether…
🎥 Watch the video tutorial In the video, I explain: -How bridge flow and speed affect the print. -Why more flow gives smoother results. -How to tune these settings in OrcaSlicer . -How to combine this with Tree Supports → “Critical…
3d printed running shoes that you can wear Use TPU filament
Edit, 23. 7. 2026: Updated the MOST 1:100 version and cover image. Added MOST 1:100 description. MOST 1:100 explained MOST stands for Magnetic Open Source Toys. 1:100 is the scale. These are the rules: 1 real meter = 1 toy cm Use ∅ 5mm ×…
All printable parts for your Original Prusa MMU2S Unit Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide.…
![[Official Remix] Flexi Extra Size Cat (Print-in-place)](https://media.printables.com/media/prints/1146999/images/8658584_808cb494-2549-4a42-b5ae-72f60e7726bc_9fdfc9b3-37cb-4725-a000-bcc358fe757e/extra-size-cat-1-2.jpg)
