Liczymy pasujące modele…
This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My CAD version if Fungineers Funwheel Thunder rails had just one height. Yes is exactly recreating the Thunder rails model but without 3 heights (just the middle height), logo and the horrible middle section. And no, these are not TFL…
A simple outrigger canoe i made a long time ago. https://outriggersailingcanoes.blogspot.com/ https://www.duckworks.com/gary-dierking-s/128.htm…
It is a Coinbank and Card Organizer for the big coin pocket of the driver seat in a Toyota Proace Verso “Crosscamp” with a hidden pocket for AirTags or similar tags.
I recommend to print it in ASA as clip will be outside. No tools needed to install. Just snap on.
I made this model very quickly to be able to attach my camera to my monitor's stand. Next to the 3D-printed part I used the top of a cheap lighting stand that broke, which is to be inserted into the tube at the top. You can then put a…
The sliding door striker receiver on the Toyota Proace (2015, L2H2) is a plastic part that tends to crack over time, causing the sliding door to not latch properly. This is an exact replacement part that can be printed at home and…
I modeled this to solve my issue with the stock loud fans on the ProArt series of RTX Gpu‘s. You simply cut off the beams coming off the center of the fan and u get a square which nicely fits inside the bracket I’ve made, then you just…
Removable miniature holders I modified the miniatures insert to include a 1mm lip on the bottom inside perimeter. This allow you to lift out a section of minis without them falling out into the box. Board storage on top I also adjusted…
I found the integrated tripod screw on the display not practicable for home use. My solution is this stand, where the display could be installed an removed in seconds. The cables are mounted on the back. In my use case it's a third…
I've updated these to include new sizes please check out the updated versions linked below. Original Description : A paint rack for ProAcryl (and other 30mm diameter bottles) for the IKEA Skadis pegboard. This design took a lot of…
Simple mount to attach an iPhone X / XS to an Asus ProArt PA279CV monitor, to use Continuity Camera with macOS. It's a snug fit on the iPhone XS, so would likely need adjustment for thicker models.
It is a Coinbank and Card Organizer for the big coin pocket of the driver seat in a Toyota Proace Verso “Crosscamp” with a hidden pocket for AirTags or similar tags.
Two Citadel paint holders for for Gridfinity, 4x4x3U (holds 25 paints) and a 4x3x3U (holds 15 paints). When used in combination with this fits across an IKEA alex desk drawer. The Proacryl holder 3x3x3U holds 16 paints. Offcourse, they…
Tried using Matt's Skadis paint rack (inspired by Wingman's ) to fill the portable paint caddy I've been building in a VATTENKAR , but found the 7 wide sections were too narrow to fill the space, and too wide to let anything else go to…
Same hardware as the original and print settings. Printed in BL A1 with PETG
The “ASUS ProArt X870E-CREATOR WIFI” motherboard has a really tall heatsink for its primary M.2 slot that blocks my AIO cooler from fitting. I wanted to replace it with a Sabrent Heatsink (SB-HTSP), but that doesn't fit the motherboard's…
I really liked the simplicity of the beer crate design that so many people have used for batteries, so I decided to adapt it for my acrylic paint bottles, specifically the ones from ProAcryl. The design fits entirely on a Mk4 sized bed,…
How to charge a Garmin Fenix (5) without charging cable? DIY, building your own cable. Designed with FreeCAD, moddels available. To charge the watch, you can use the two outer connections for charging, regardless of polarity (works in…
This will not fit small print surfaces. You may need to adjust the orientation on your printer to fit. The remix includes three of the universal hooks required to hang it from the skadis board.
It's just a basic remix. Printed fine with support, 0.4mm nozzle and 0.2 layer height.
This golf ball marking stencil is designed to help golfers create precise and consistent alignment lines on their golf balls. Made from durable, lightweight material, it securely fits over standard golf balls, allowing for easy and…
ECU Silencer for BG-ProAIR & AirBoss The ECU Silencer for Dräger BG ProAir & PSS AirBoss Connect is your new maintenance sidekick! Designed to reduce distracting alarm noise during service, this smart tool helps you focus on the job…
BG ProAir breathing air cooler tool The Dräger BG ProAir breathing air cooler tool is specially designed to simplify the assembly of the pressure sensor coupling. Effortlessly mount the nut with this tool for a faster and more efficient…
Dräger BG ProAir connection Cooler & Absorber The BG ProAir connection adapter is designed for front attachment of the BG ProAir cooler or absorber. It securely attaches to the device side, allowing for easy connection of the cooler or…
BG ProAir connection hoses & cooler The BG ProAir connection adapter is designed for the front connection of the BG ProAir hoses or cooler. It securely attaches to the device side, allowing you to easily link hoses or the cooler for…
Dräger BG ProAir connection breathing bag This adapter provides only the front connection for the breathing bag. This ensures a secure and optimal fit on the breathing bag side, while allowing flexibility for integration into various…
This is remix to allow you to mount a K1/K1C tool holder to the same printer' Side Panels created by @LEOTE_approach for the K1/K1C/K1SE. I also have a Multiboard compatible version in my profile. Printing 0.20 Layer Height No Supports…
@LEOTE_approach creates amazing mods for the Creality printers such as the Side Panel addon for the K1 series printers. I made tubing clips designed to hold and guide tubing on these custom side panels. They are little clips that just pop…
This was made to fit the K1 Series Side Panels created by @LEOTE_approach. If you are looking for the holder that fits the hex slots on your K1 series rear panel - you will find it in my portfolio. This holder is based on a classic but…
tunel insert into middle console for PSA and Toyota cars 2019+
clip d'ouverture et fermeture de vitre arrière de Toyota Proace Toyota Proace rear window opening and closing clip
The model is suitable for mounting a medium-sized system camera on the supplied column of an Asus ProArt PA384CGV monitor. The column has a diameter of approx. 50 mm. The same column is also used on other ProArt monitors. The adapter can…
Simple cup holder that fits mentioned cars from around 2019+. Hole in the model is 83mm at the top and tapered a little to the bottom, designed to fit a Waterdrop 350ml thermo cup. It snaps pretty firmly into the center console, but it's…
Designed this for the Toyota Proace City. This van is the same build as the Citroën Berlingo, Peugeot Partner/Rifter and the Fiat Doblo. I used OpenSCAD to design the model. Cup Holder Extender from the 62mm on the dashboard to 87mm. The…
I recommend to print it in ASA as clip will be outside. No tools needed to install. Just snap on.
I made this model very quickly to be able to attach my camera to my monitor's stand. Next to the 3D-printed part I used the top of a cheap lighting stand that broke, which is to be inserted into the tube at the top. You can then put a…
Laptop riser for better airflow for Asus ProArt P16 (H7606) with clearance for charging and USB-C port. Pieces stack together for storage/transport. Created this model based on others to better fit the laptop and lock into place against…
Rear rail covers for the aforementioned vehicles. I printed them in ASA on the textured build plate, but still needed a nylon-specific Magigoo adhesive for proper bed adhesion.
This model densely packs 25 ProAcryl paints (or similar sized bottles) in a 160x160mm Skadis rack. The picture shows a 2x3 grid of racks capable of holding 150 bottles. It used the universal hook to attach to the wall. To allow inserting…
Es un modelo que consta de 3 partes: - Pequeña pieza de 2.4 mm - Base de logo - Letras PROA El modelo debe imprimirse, 1ro: la base del logo como g-code individual, 2do: letras y pieza de otro color para que se imprima de a 2 colores.…
ProAcryl paint holders for IKEA Skadis pegboards. Will fit any 30mm diameter size bottles.
The sliding door striker receiver on the Toyota Proace (2015, L2H2) is a plastic part that tends to crack over time, causing the sliding door to not latch properly. This is an exact replacement part that can be printed at home and…
Sliproad Interlocking puzzle by László Molnár Assemble six pieces into a 4x4x4 cube shape. Sliproad is one of a series of Turning Interlocking Cubes ("TICs") by the endlessly creative László Molnár. Its pieces are all made from adjoined…
A paint rack for ProAcryl (and any other 30mm diameter bottles) for the IKEA Skadis pegboard. Inter-compatibility All of the Skadis racks that I've published should work together on the same boards assuming that a row is all A models or…
Added a hold and space for a 1/4 20 screw heatsink insert!
This is a remix of - https://www.thingiverse.com/thing:5131720 I saw this, thought it was great, but my alignment stick was to thich ( 7 mm ). So i looked at this object and designed a copy to work with the 7 mm alignment stick, not as…
A stand for the Garmin R10 Approach, that will allow you to level it on the course, or at the driving range. The hole in the middle if designed for a 32x7 mm levelling bubble. Print at 0.10 layer height for best results.
This is an overstable approach disc similar to a Discraft Zone, or MVP Entropy. Prints well in PLA, but for best results and durability, print in TPU.
Prototype created for the possibility of driving in the FOOTY category. To comply with the rules, the boat is placed in the measuring box main part down and the float is supported by the keel on the opposite side. In order to achieve the…
A stealthy way to hide an AirTag under your bike seat (modelled to fit the Giant Approach Seat: https://www.giant-bicycles.com/us/approach). The two pieces clamp together using M3 hardware. Use the bolt length that works best for you ( I…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
By turning the arrow in the direction of the wind you can see from which direction you have to approach (ship).
Say hello to never buying another propeller guard for your cinewhoop :) Update 19.05.2024.: See the upgraded, better version here: https://www.printables.com/model/884159-unbreakable-propeller-guard-for-cinewhoops-upgrade A little back…
Dashcam holder for Citroen Berlingo III family (2019+ - also Toyota Proace City, Peugeot Partner, Opel Combo) behind the infotaiment panel. Top part has slot for Navitel R600 dashcam but you can change it for whatever camera you're using.…
Designed specifically for the PSA Berlingo (K9) model's aftermarket center console. Manufactured using ABS to withstand varying weather and heat conditions. Features a movable cupholder and an integrated USB cable holder.
My phillips twisted brush hub, there is no chance for buy so i create it myself. Printed with ABS and work well. Printed 105% resize for ABS.
I designed this glasses holder for monitors with a 1mm bezel. I use an ASUS ProArt Display PA279CV 27" for my office work and have two sets of glasses - one for regular use and one for computer use. I always forget to switch to computer…
Printed without supports from PLA, Item weighs approx. 950g
The sequel to Trapped, the guy is approaching beoming 3D and is now approaching his freedom from his 2D prison.
I have always been looking for an articulated arm to put a vise or different tools/supports to work with. Every one of them that I printed from already existing model has the same problem: tightening it to much and you loose any sort of…
Key for Garmin Approach golf sensor CT10 to replace battery
This model is based on my 4080/4090 FE original anti-sag bracket, but updated to work with the ASUS ProArt 40 series GPUs in the FormD T1 2.1 For a more robust solution, check out the official travel kit BOM: 3 x M3x5 countersunk bolts* 1…
Monument ProAcryl paints are a little wider than some paints, a little narrower than others, and don't fit perfectly in any of the standard paint trays provided with the Modi Boxi organization system. These files will store 25 paints in a…
The ProArt PA602 Low-Profile Watercooling Adapter is a custom-designed 3D printable accessory that addresses the limitations of the original PA602 case. While the PA602 case typically allows for radiators up to 34mm in thickness, this…
3D model of the Proaim Skywalker frame ++++++++++++++++++++++++++++++++++++++++++++++++++ I cant assure, that the messurements of this model are 100% right. Back when i made it, i weren' t that good in 3d modeling, so forgive me if…
Conector que permite unir módulos de Ant Dimension con módulos Glorius de Proantshobby. Tras el cierre de Proantshobby, nos han compartido su conector para crear un adaptador y así sus clientes puedan unir sus modelos Glorius a nuestros…
Footrest for Toyota ProAce City Verso (2020) with automatic gearbox to protect original carpet from wear out. Double sided sticky tape is used to attach it to the carpet. Printer: Prusa MK4 Nozzle diam.: 0.4mm Layer: 0.2mm Filament: PETG…
Printed vertically with raft and supports (removed easily from inside the HDMI and USB-C ports) with 0.2mm nozzle on a Bambu Lab X1C.
Just import to PrusaSlicer and press button "Split to objects". “An innovative way to generate eggs from an empty space.” Note that before splitting this STL into objects there is just a hollow space in the hen. By splitting the cavity is…
