Liczymy pasujące modele…
If you are the kind of person who rides around with a Motorola APX series portable radio flopping around in your cupholder, this model is for you. This will work with APX6000/7000/8000. It will likely not work with other APX radios that…
Have got into ham radio communications recently and bought a few radios. I started stacking them but soon i got submerged with wires and microphones. The thing is i didn't know which microphone was for which radio because they use the…
A company I work with have replaced all their radios with Baofeng BF-888 models, and they wanted to switch over to Klickfast studs to maintain compatability with standard UK ambulance uniforms (which generally come with klickfast docks…
This is a mount for a Motorola XTL radio, the image is of the dual radio mount.
Dieser 3D-druckbare Einsatz verwandelt den Radioschacht im Trabant in ein praktisches Ablagefach Das Modell besteht aus einem passgenauen Gehäuseeinschub und einer Schraube mit Klemmfuß zur Befestigung. Einbauort: Radioschacht im…
This is a simple tool for opening Vaisala RS41 radiosoundes, also known as weather balloons. After injuring myself again trying to get the plastic latches to relelase with pliers and screwdrivers I thought there must be a better way. I…
How to use the tools video: https://youtu.be/PJnoJSMHrW0 I did a lot of trial and error to get this design perfect. The small clip pops right out with no effort. The larger clip is very stiff and takes a lot of force, but this tool fits…
Print at a layer height of 0.05mm for best detail. Your printer needs to be well calibrated.
Small wall-mounted clips for hanging handheld radios (or anything else with a spring-loaded belt clip). There are two mounting holes for screwing into a wall. I've included customized versions for some HAM/GMRS radios I have access to,…
The detailed description can be found here: https://motleyscience.com/2025/11/22/portable-moxon-antenna-for-weather-radiosonde-hunting/
This is a desktop stand that holds two RAK19007 Meshtastic radios that use TonyG's (https://www.printables.com/@TonyG) case design with a double 18650 battery configuration:…
Rim is designed for ABS Tire is designed for TPU. I printed mine with 5 outside layers and 30% fill (which was probably a bit excessive) 0.2mm layer height. Rim slides into tire with a bit of persuasion. Feel free to glue in place. These…
Galga para medir radios de 1 a 15 mm aumentando de izquierda a derecha
This is a custom-designed 3D-printed enclosure for the MySondy Go radiosonde hunting device based on the TTGO LoRa32. The housing is optimised for outdoor, real-world use: it protects the electronics from dust while keeping all essential…
The is for the Philco radios Circa 1940's that use the short push button. The knob measures 0.485x0.477x0.65 I designed the slot slightly larger than the shaft and added a ridge inside the slot to hold it firmly on the shaft. This works…
This is a non-functioning PTT button replacement for the Baofeng UV-5RM series radios so non-licensed users do not have to worry about accidentally transmitting while using the HT. To replace your button, use a small screwdriver or knife…
Battery Lid for the Honda CR250R Motocross Bike Featuring Ricky Carmichael RC Motorcycle RadioSack Model 60-4353 Want More Free Designs? Like and Comment! If you enjoy this design, please leave a like and/or a comment. It keeps me…
Gehäuse für den TonUINO-Hörspielplayer Infos zum Projekt: https://www.voss.earth/tonuino/ Platinen: https://www.leiterkartenpiraten.de/ Auf den Bilder ist mein erster Entwurf mit der TonUINO-Classic Platine zu sehen. Das Gehäuse für die…
Got a Pinecil V2 recently but found that the RadioShack Soldering Iron Holder/Cleaner combo didn't fit the Pinecil, so I decided to create an end cap that's essentially the same design as the original but it's designed to fit the Pinecil…
Parametric buttons to easily customize the layout of your Kenwood radio's programmable function buttons. With up to 11 configurable function buttons, the TK-690, TK-790, and TK-890 are versatile commercial FM radios, that are easily…
This is a shelf for displaying 4 RadioShack LCD games. It's around the same height as a CD jewel case or gameboy box. RadioShack-Cradle.stl - The part that holds the games. Print with 3 walls, 0.4mm wall thickness, no infill .…
Now you can use a mounting bracket intended for a pipe (such as the mounting brackets for the Ubiquiti PowerBeam series or other pipe-mounted antenna systems) on a 2x4 and preserve the ability to aim them. Print two of these and attach…
Description: This is a free 3D-printable holder specifically designed to fit the Motorola Talkabout T210 Rechargeable 2-Way Radio (Black with Red, 2-Pack) . The holder was modeled to securely hold your walkie-talkie in a convenient,…
I really like the RadioShack branded soldering iron stand that I have. Unfortunately, the stand was designed to be used with a larger soldering iron and the TS100 that I have right now didn't fit well. I removed the plastic cup that the…
Mostly accurate 1/4 scale Lockheed Martin LMS-6 radiosonde model. The holes in the body are most likely too small and I needed to enlarge them with a soldering iron and superglue the pieces in to make them stay. I printed the body at…
Una solución sencilla para repetir redondeos de esquina en piezas de madera utilizando una plantilla impresa en 3D. La HF-CT-005 incluye 9 plantillas, cada una con un radio diferente: 10 / 20 / 25 / 30 / 35 / 40 / 50 / 60 / 75 mm La…
Držák radiostanice TPH 900 do Tatry Force před velitelem. Rozteč děr odpovídá šroubům na palubovce. Není potřeba vrtat
I needed something to organize my radios and whipped up this in Fusion360. This stand is for: 1 x Baofeng UV-S9 Plus 2 x Baofeng BF-T20 This is a snug fit and despite the photos showing slot for the belt clip, the provided model does NOT…
The handle of my trusty Radioshack double-sided pick broke, again… I had already super-glued it a couple of times and this time it broke on the other side. It is still super useful, so I figured it was time for a new handle. Quick and…
As requested by a Reddit user. Work in progress!
A pole-mounted line cutter for radiosonde recovery. The tool attaches to the tip of a telescopic fishing pole and helps pull, guide, or cut the line, parachute cord, or balloon remnant when a radiosonde is caught in a tree or other…
Cap designed to go on Rugged Radios headset to stop wind noise. Might fit other headsets as well.
I picked up a Realistic (RadioShack) Stereo Mixer many many years ago. Unfortunately, what knobs did remain on it when I got it all broke pretty quickly. They're just quite brittle. Unfortunately, I have not been able to find any knobs…
Glue this to a JR bay cover and then you have a place to hold a windicator stick to help you find thermals when flying radio controlled model gliders.
A one-piece mount that puts a Skyzone M5 FPV monitor on top of a HelloRadioSky V12, with the M5 screen facing you, so you can see the monitor and the radio's own screen at the same time. It doesn't modify the radio at all. It hooks over…
Easy to print, no supports needed. The Radiosonde is deliberately a snug fit so that is is stable, bit if it's too tight try scaling the model up a couple of percent.
Neulich ist mir ein Halter vom Display meines Autoradios von Joying abgebrochen. Daraufhin habe ich es neu konstruiert und das ist das Resultat. Die Gelben flexiblen Kunstoffteile einfach von dem gebrochenen entnehmen und aufstecken. Es…
These off brand GORE vents are fantastic for keeping moisture out of small sealed electrical boxes and maintaining equal pressure. But if you live somewhere with a lot of rain the driving rain can saturate the membrane and result in…
Parametric buttons to easily customize the layout of your Kenwood radio's programmable function buttons. With up to 11 configurable function buttons, the TK-690, TK-790, and TK-890 are versatile commercial FM radios, that are easily…
Glue this to a JR bay cover and then you have a place to hold a windicator stick to help you find thermals when flying radio controlled model gliders.
Need comms out in the field. Two different styles, CB and Phone. Both with filament arial holders. So, I have made some adjustments to make the filament holders a bit better and added a couple of features. *Just made a quick adjustment to…
Držák radiostanice TPH 900 do Tatry Force před velitelem. Rozteč děr odpovídá šroubům na palubovce. Není potřeba vrtat
A pole-mounted line cutter for radiosonde recovery. The tool attaches to the tip of a telescopic fishing pole and helps pull, guide, or cut the line, parachute cord, or balloon remnant when a radiosonde is caught in a tree or other…
I designed it foe BETAFPV but should work on most radios. feels a bit more comfortable. Its a decently snug fit so it might be easier to screw off the top of the thumbscrew to avoid damage. also it's a good Idea to use the grip to tighten…
Rim is designed for ABS Tire is designed for TPU. I printed mine with 5 outside layers and 30% fill (which was probably a bit excessive) 0.2mm layer height. Rim slides into tire with a bit of persuasion. Feel free to glue in place. These…
Utilizes RAM Mounts Track Ball with T-Bolt Attachment RAP-B-354U-TRA1
This bin fits the Motorola T9580 radios and it isn't a tight fit so other similar radios should fit as well. The antenna hangs over into a fifth square. If you prefer to print that too, I've included the Fusion file so you can make your…
This is my first original model! I made this using good ole TinkerCAD. The final product turned out great for my needs. This radio caddy can be mounted on the wall, which accommodates charging via USB-C cables through the bottom holes.…
This wall-mount holder was designed for Baofeng UV-5R (and compatible models). It securely stores 4 batteries and two radios , keeping your gear organized and ready to use. Holds up to 4 batteries side by side Fits the radio with or…
I needed a general purpose loop for my radios that would allow it to sit lower than if on my belt. This then allowed it to be easily accessible when wearing a jacket or outdoor top as it sat below its bottom. It would also make it easier…
Este accesorio está diseñado para ampliar las capacidades de cualquier calibre digital o analógico, permitiéndote medir con precisión el radio de superficies curvas, como esquinas redondeadas de mesas, perfiles, piezas de carpintería o…
Need comms out in the field. Two different styles, CB and Phone. Both with filament arial holders. So, I have made some adjustments to make the filament holders a bit better and added a couple of features. *Just made a quick adjustment to…
Das beigefügte Modell ist eine Nachmodellierung in vereinfachter und druckbarer Form der originalen DIN-Radioschachtablage für einen Renault Master 3 von Baujahr 2023. Ich kann nicht garantieren ob dies für alle Fahrzeuge passt, bei…
I was using the FPV Monitor Mount designed by user @BigOrangeFish for a while with my Blackpearl monitor and a Spektrum DX6 radio. https://www.thingiverse.com/thing:2313180 This mount is very good and robust but uses a custom connection…
Needed a name plate that said radios to cover the Dewalt logo on an old drill box that I now use as a case for my radios.
This lets you pop a 2 DIN flat radio in the original 1 DIN slot. It's specifically made for the FIAT Ducato, but odds are it'll fit most cars. I'd suggest printing it in ABS or ASA, though PETG should also hold up for some time.
remixed the original stand to be able to hold 2 radios or a radio and a mic
![Radioshack RC Car Tire & Rim Assembly [FREE]](https://media.printables.com/media/prints/1202421/images/9031347_86046047-ee6c-4f77-8416-826405a29bfb_e22a39e5-ff4d-4c3b-be61-1acb06b2c45f/pxl_20250222_124357543.jpg)
![Radioshack RC Car Tire & Rim Assembly [PAID]](https://media.printables.com/media/prints/1202440/images/9031473_cf10a714-bf33-45b4-8063-a40bdcfd8560_80bea3d0-811f-4278-9ab0-a4ba568fc227/pxl_20250222_124357543.jpg)
