Liczymy pasujące modele…
Print upright on bed for best strength and accuracy, put the arrow marker at the top. I added a single support for the bottom tab that sticks out, and a brim for good adhesion. Otherwise, standard PLA works well for snapping onto a…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
If you have solar panels on a flat roof and the panels are less then 15 degrees mounted, some water will stay in the lower edge of the panel. After some time your panel become dirty in the lower part and it reduces photovoltaic panel…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Butterfly knife blade (Butterfly Comb / Balisong Comb)
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
I printed a couple of copies of @Adam 's most excellent rock scent-training capsule recently: https://www.printables.com/model/295199-scent-trainer-rock and was impressed with both the concept and execution. As an aside - I've also…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
I had previously re-mixed some dog scent training capsules that had a magnetic base - https://www.printables.com/model/936563-magnetic-dog-scent-training-capsule My daughter wanted to use the capsules with a cheap rubber safety non-slip…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple, adjustable tool for training pressure equalization between the middle ear and the environment. If you don't know what you're doing, ask you diving instructor before use. Original design by Nikolai Ovcharov . Check out his other…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To increase yields and flowering, young shoots on plants should be brought into a horizontal position in July-August before they harden. This is very easy to do with this clip and is much easier than tying or weighting. The horizontal…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Fanciest Soccer Cone on the Pitch. Congratulations and Thanks Yous to Phoem for winning the print contest and testing out the print with TPU It worked great.
Wydruk około 9,42 €–11,51 € nettoWstępna wycena jednego wariantu
Hello, Today I have for you a Case, a case for the ESP training knife . The knife is connected using M3 screws (6x 22mm and 2x 26mm) and M3 nuts. The ESP knife fits beautifully into the case and does not look out of place. The case is…
Wydruk około 8,51 €–10,40 € nettoWstępna wycena jednego wariantu
Self-Draining Sponge Holder | Wave Drip Tray - Remix raised by 6mm - Size: Large (115x85mm)
Wydruk około 4,54 €–5,55 € nettoWstępna wycena jednego wariantu
Attach to a suitable weight to use in static strength exercises to develop better muscles. Especially useful for Camp Perry style “airsofting”. You'll definitely find this familiar if you are old school competitive. Greater strength means…
Wydruk około 7,27 €–8,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 19,98 €–24,42 € nettoWstępna wycena jednego wariantu
Idee: In unserer Dummy-Trainingsgruppe werden an einem normalen Trainingstag etwa 40 Dummys von 8 Besitzern verwendet. Am Ende werden die dann untereinander wieder getauscht. Das dauert sehr lange, daher wurde eine farbliche…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Training Wheel Replacement with 10.4mm shaft diameter. Based off of gigi78's Training Wheel. Changed the inner diameter to fit a different diameter.
Wydruk około 4,10 €–5,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed for for both Instructors and Students, the Training Wheel is a wonderful tool to clearly show the relationship between the Six Directions and the Three Dimensions. Easily explain and demonstrate: Six Directions Three Planes Three…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Die Hüllen für die Cents werden mit Kunststoffkleber wie Uhu Spezialkleber zusammengeklebt, nachdem man die Cents eingelegt hat. Drei von diesen werden am Schluss in die HalterFuerCentsCut-Objekte ebenfalls unter Zuhilfenahme von Kleber…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Das Trainingsrad wurde sowohl für Ausbilder als auch für Schüler entwickelt und ist ein wunderbares Werkzeug, um die Beziehung zwischen den sechs Richtungen und den drei Dimensionen deutlich zu machen. Es lässt sich leicht erklären und…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🚨 UPDATE: Check out the improved V2 here: BOM: Printed with ROSA3D High Speed PLA Gray Say goodbye to soggy, smelly sponges. This drip tray features a functional wave pattern on the bottom that lifts your sponge (or soap bar) slightly up,…
Soap bar holder that drains on its own
This 3D-printable stand is designed to hold sponges, washcloths, and soap, ensuring that excess water drains directly into the sink instead of pooling on your countertop. Say goodbye to soggy sponges and messy countertops with this…
Dummy magazines for safely practicing dry-drills etc. They lock in normally on the mag catch and don't activate the slide release/hold-open. G17, G19 and extended versions. Should fit all generations. 05.08.2025 Update: Taken down due to…
A Soapdish tray for the kitchen or bathroom. Self-draining, large enough to hold soap bottle & sponge. Small version to hold a sponge or soap bar. Filename: 1 x Kitchen_Bath_Soap_Tray_Large_v1.stl Large enough to hold soap bottle & sponge…
BOM: Printed with ROSA3D Starter PLA Black Say goodbye to soggy, smelly sponges. This upgraded drip tray features a functional wave pattern that lifts your sponge (or soap bar) up, allowing air to circulate underneath and water to flow…
this model is non functional but the trigger, slide and magwell still move.
An adjustable LST clip that locks into place. I've designed to minimize the number of overhangs. I recommend printing with supports with overhang threshold set at 40 degrees or less. Supports should only be needed on the bottom of the…
Updates^ added enlarged cylinder inside gear, with guide added reinforced connector, instead
This is a special set of (glassless) glasses, intended to be used for training your eyes' ciliary muscles (these are the muscles that focus your eyes on different object distances) to avoid or even heal visual defects (lifestyle diseases)…
Balisong butterfly knife toy. If you beginner in flipping knives i recommend printing mine remixed version beacuse its more durable. Oryginal version is of course prettier but standing prints are less durable. Print settings: Layer height…
DISCLAIMER: THIS IS A GUN MODEL WITH NO FUNCTION. IT HAS NO MOVING PARTS, AND IN NO WAY CAN WORK AS A FIREARM WITHOUT MODIFICATION TO THE MODEL. FURTHERMORE, THE DESIGNER OF THIS MODEL IS IN NO WAY RESPONSIBLE FOR ANY ILLEGAL ACTS…
CATCLIP / LST clip for plants Low Stress Training. practical to curve and form the plant branches in order to provide more aeration, light exposure, fruiting… useful for all kinds of plants! the stock size is made for 8mm stalk. RESIZE as…
*** 16/08/2023 added another version of the Blade.*** Hi there, I designed this knife to be used in airsoft. Therefore, for your own safety and especially the safety of others, print the blade only out of flexible materials like TPU. Not…
Print with PLA or use a resin printer. If you need to use a brim, add a slight gap so the brim comes away cleanly, otherwise you may need to carefully trim away any flashing material since this is a tight fit.
Creator:muskokaresearch https://www.thingiverse.com/thing:5352444
Hello, Today I have a 5-speed training gearshift for you. It is great for practicing manual gearshifting in a car. It prints several parts, there are also files for multi-color printing. For proper functionality, you need to use a Print…
Dog Training Clicker - Effective, Easy-to-Use! [Print in Place] Train your dog quickly and positively with this clicker. Clear sound reinforces commands for better behavior. Let it cool for 20 minutes on buildplate before trying to use.…
Hello there! Tired of your fridge running away only to be taken by some jawas and sold to the first scruffy-looking nerf-herder that comes their way? It seems like it's a problem that has plagued us for generations… or at least since…
ENG: This pot can be used both as a self watering pot and as a classic pot with draining holes but with a modern design cover pot, since the bottom of the internal pot doesn't touch the one of the cover and allows the water to drain,…
My sister asked me to make her a soap holder like the one by Kitsch but with two slots instead of three like their product, and seeing as it was a pretty simple form, I threw this model together and printed it for her. Turned out quite…
I designed this putting aid to help improve my sons aim with the added benefit of the ball rolling back to him if he doesn’t manage to get it in the target spot. I have also added a blank insert if you just want to have some fun getting…
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). There are two sizes to choose from (the original, 64 mm…
The original file was two pieces and way to big compared to a real x26. It was a nice model so I modified it to fit my needs. We use it for recruits at police academy for scenario based training. Fits securely in holster. On the .stl file…
This is a portable pinch and crimp block which can be used with up to 9mm rope, the original is made out of wood and i copied the design which can be 3d printed. I would highly recommend to sand all the surfaces for better grip, i…
Trainingsdolch für Force on Force Training. /Training dagger for force on force training. Gedruckt mit 100% Infill / Print with 100% Infill Gcode für Trainingsdolch mit text . Modell ohne text ebenfalls angehängt / Gcode for…
According to the manual, kids will model simple mooring cleat, which will help them to learn how to tie cleat hitch. After printing, mooring cleat can be screwed to the wooden base with two screews.
Combines the benefits of free-hand sharpening and a fixed-angle system. It takes less space than a full fixed-angle system, allows you to use any stone, and is quicker to use. Just put a knife on a magnet, set the angle with a screw, and…
Grogu, the adorable and enigmatic Force-sensitive creature, known to many as "The Child" or "Baby Yoda," had a curious habit that both amused and perplexed those around him. Whenever he had the chance, Grogu would eagerly engage in the…
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). Printing tips: Print the rock and cap as oriented in…
Was interested in buying a portable hangboard but didn't feel like the cost of $40+ was justified for what's just a simple wood cutout with some pocket routing. A half hour later I had a model, and 20 hours of printing + roughly $8 worth…
Es una estaca para clavar en la tierrra para poder usar la tecnica Low Stress Training con las plantas. mejorado el agarre en la tierra, agujero para unir una con otra y llegar a lugares mas lejanos imprimir plano sobre la cama, no…
Printed with an 0.8 Nozzle. You will need to M5 Screws to fix it at the desired angle. This is made for 8mm allignment sticks. Also added a small pocket to place some counter weights.
Made a simple karambit because I wanted to try making something with the bearing I had left. Used a 6704 bearing or the equivalent to it with 20mm inner, 27mm outer and 4mm thick dimensions. Recommended build space 200x200x10
Again working progress, I really like the hochul extension for its fitting so I wanted to gave it a nice look. You know operator vibe etc. so here is the bastard child of the hochul extension and the skin of an I think airsoft ar15 mag,…
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). The embedded magnet cutout is designed for a 12x1.6mm…
Soap/ Sponge Holder + Drip Tray allows for easy drying with a self-draining design and removable honeycomb lid design for easy cleaning. Print Settings: Layer Height - 0.2mm Wall Loops - 3 Infill Density - 15% Support - Auto Tree Printed…
For final assembly, you will need two M8x50 bolts, two nuts, a 35mm wide and 0.5-1 m long sling, as well as a metal half-ring At both ends of the sling, sew a loop so that a bolt can be inserted into it. After that, insert this loop into…
Use the model with constructed support or add a support in the slicer. Press the Clip on a flat surface to separate the parts again.
Some simple and easy2print hooks for plant-low stress training in 3 different sizes. Printed in PLA - maybe PETG could be a bit better so it would be a bit more flexible - but also with PLA definitive usable. You simply have to use nylon…
This trainer is modular. Want more links? Print more! The span of each section is a little larger than the bed of my MK3 so each span is split up into 2 sections with connectors held together by M3 screws. The caps have threads build into…
I print these in PETG. The tap rack training aid is printed standing up.
Radboudumc Cric & Trach model. This 3Dlab Radboudumc Cric & Trach model is developed by the departments of Anesthesiology Radboudumc and 3D lab Radboudumc, Nijmegen, the Netherlands. (Bruijstens, Loonen). The file and model are developed…
With this mold, you can easily cast your surgical culturing training pads out of silicone
Marksman-H Training Remote from Star Wars A New Hope. .obj file is an uncut high poly version. .3mf files slice the orb in half and add connectors for easy printing and assembly. gcode – see .3mf + includes organic supports. Christmas…
Karambit Blunt Training Knife for martial arts use. Safe to practice martial arts skills Print instructions Category: 3D Printing Summary Karambit Blunt Training Knife for martial arts use. Safe to practice martial arts skills. For…
Yet another clip for low stress plant training :) you know how to use it, because u searched for it :) have fun ! print with 0,2 layer and PLA is totally fine !
Simple training rings for the dartboard. 50mm and 25mm diameter. Simply fix it with an arrow or a tip and train diligently. Print Settings Printer: Artillery Genius Rafts: No Supports: No Resolution: 0.1 Infill: 20% Filament: Das Filament…
Hello, Today I have a Training Knife for airsoft or larp for you. It is suitable for training with a knife. It is created exactly according to the original training knife. It is necessary to use a flexible material for better function. I…
Printed in PETG - Hellfire Red Extruder PETG - f3d file included! Feel free to remix. Wieso habe ich ein eigenes Modell gemacht - Was waren die Verbesserungsideen: Befestigung mit Dartspitzen Formgebung wie die Triplefelder Perfekt fit…
Teaching aid for learning to read and write braille with large 6mm diameter dots. https://youtu.be/Z9aghYXRcNk Customization Case Size Single cell 8-cell Case Style Hard Case with embedded TPU inserts Fully TPU Case Button Options Flat…
Fully printed working butterfly knife for training.
Introducing the Geometric Soap Holder! This model doubles as two soap holders in one! Otherwise, they can be used together for a more pleasing experience. Print Settings Keep layer height relatively low to achieve proper curves/slopes for…
I created this to use when I teach rifle and pistol classes. It's a nice way to help visualize correct sight picture and sight alignment when doing trainings. Easy to print. I use .24 layer height and 25% infill but you can adjust as you…
9mm round made to be pressed into a spent shell for training purposes. Printed with PLA+ at 50% infill but any ole settings should work more or less fine. Recommend you print in a shiny bright color to avoid confusion.
I designed this soap holder as I couldn't find something similar in the market. The base is inclined for the water to easily drain into the sink but the soap bar rests flat. With this soap holder my soap is always dry! PS. It can be…
Teaching aid for learning to read and write braille with large 4.5mm diameter dots. https://youtu.be/Z9aghYXRcNk Customization Case Size Single cell 8-cell Case Style Hard Case with embedded TPU inserts Fully TPU Case Button Options Flat…
Based on the Joussot's shape. It is recommended to print it in PETG wich is less breakable compared to PLA, adjust the size around 24cm or that fit your needs. Use a minimal infill of 20% with Gyroid, but its better to infill it to 70%…
This is a part that connects to the lower part of the air conditioner and to it the hose for draining condensate. Because the shape is funnel, there is no need for a rubber seal. The diameter of the hole in the air conditioner is approx.…
BOM: Printed with ROSA3D Silk PLA Steel Say goodbye to soggy, smelly sponges and mushy bars of soap! This practical self-draining holder is the perfect utility print for your kitchen sink or bathroom counter. Designed with everyday…
This is a dish soap holder with a removable grate and the basin has holes for water to drain out. Mainly for use in shower. When printed at 100% the soap dish measures 120 mm x 80 mm x 20 mm. No supports needed. Print flat. Print…
Karambit style blunt training aid for larger hands. Its the bigger red one in the pictures. Requires 6off M3 x 12 pan head screws and nuts. the head should be under 5mm A pin inserted between the handles stops the blade move round to far…
Left handed version
Raining cloud printed by Prusa i3 MK3s. When your home plants need to water by naturally way. Print instructions The first step is to glue the two extruded parts together.Put a suitable rod into the side hole on the holder. Then place the…
Resolution: 0.20 Infill: 15%
This is a multi-function climbing grip/finger strength trainer. **The strength of 3D prints can vary significantly depending on the calibration/filament/temperature/etc. Use at your own risk** Includes: 100mm, 60mm, 40mm, and 20mm pinches…
Print using approximately 25g of filament, fill with 21 pennies to reach standard empty magazine weight of about 71g
Dummy rounds to turn empty casings into Snap Caps. Push 3d print into the case /tight fit), and check the overall length is under 30mm.
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
There are many options in the veici menu when making RC Airplane settings. A practical model airplane platform for you to use in the learning process. Micro Servo (180°) : https://s.click.aliexpress.com/e/_oFrSYAH
UPDATE: Version 2 Hochgeladen. Diese bietet neben einer leicht optimierten Form auch noch ein Loch um z.B. einen Draht zu befestigen. Ergänzt wurden ebenfalls weitere Längen. Sollten weitere Anpassungen gewünscht sein, gerne eine PN…
You can add a captive nut and screw to hold the build plate better but it's not a requirement.
This is a toothbrush holder which has a drain. It is easy to clean as all you have to do is wash it out with water!
The original karambit model I was playing with was too gosh darned small, so I grabbed one I like off Thingiverse ( https://www.thingiverse.com/thing:3367382 ), upscaled it and tweaked it a bit to take M3 hardware. The name is silly, but…
3D Printed Darts Training & Focus Rings Take your darts practice to the next level with our 3D Printed Darts Training & Focus Rings! Designed for players of all levels, these rings help improve your accuracy, consistency, and mental focus…
You know that after printing with sla printers, it is necessary to clean the resin tanks. Thanks to this design, you can filter the resin in the resin reservoir and reuse it. It's very easy to build. Necessary materials; M3x10 x6 M3x16 x2…
Training cones for football games or other sports where you have to delimit spaces and exercises, without support. Very fast.
Easy to print golf putting hole for training etc.
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) 9mm Luger 9x19mm Parabellum Snap Cap Dummy Training Bullet Cartridge Round w/ TPU Firing Pin Cushion Print the cartridge/bullet in PETG or ABS, and…
Hello, Today I have for you a training knife case including a LARP/Airsoft knife . It contains 3 parts of the case that need to be glued or screwed. There is also a model of a compatible knife. For better printing, you need to cut it in…
