3506 modeli
Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Ice Scraper for Car – Durable Winter Tool This sturdy ice scraper is designed to clear frozen car windows quickly and efficiently. Its ergonomic handle with a reinforced grid structure ensures strength while saving material. The wide…
Wydruk około 1,94 €–2,38 € nettoWstępna wycena jednego wariantu
A useful tool for removing prints from the bed with interchangeable 3D printable blades for when one eventually wears out. You can print the body in either PLA or PETG, however for the blade PLA is highly reccomended. To install the…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
A scraper using simple razor blades which is not flimsy or imprecise. The blade is held firmly in place. Please be careful when inserting the blade. Strongly inspired by https://www.thingiverse.com/thing:2024019 Use razor blades such as…
Wydruk około 1,12 €–1,36 € nettoWstępna wycena jednego wariantu
Il SiliconeEdge Scraper è il raschietto pratico e resistente, progettato per rimuovere facilmente il silicone in eccesso da spigoli e angoli. Grazie alla sua punta a V di precisione , elimina il sigillante senza danneggiare le superfici,…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
Please compare the first photo with your slicer before printing. Make sure that your scraper head underside looks like photo 3. If it takes longer than 36 minutes to print, then something is wrong with the slicer settings. Optimized…
The provided gcode files use Prusa Slicer infill density modifiers to provide more infill towards the scraping tip to make it stronger. The new version 2 model includes ripper teeth.
Wydruk około 4,11 €–5,03 € nettoWstępna wycena jednego wariantu
Gcode contains manual filament changes. Hexagon pattern is visible thanks to the transparent orange petg filament. You can scale it down and have it on your keys, if you want to. Happy printing!
Wydruk około 2,79 €–3,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
As mentioned above, this handy tool helps you effortlessly remove your 3D print from the heat bed—because let's be honest, nobody enjoys the struggle of peeling off prints like they’re stubborn stickers. It’s also a lifesaver when your…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple, cost-effective and time-saving triangular ice scraper :) cca. 1h print 0.2 mm layer / 0.4 mm nozzle / 20% infill if you like this, buy me a beer ;) https://www.buymeacoffee.com/dmux
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Nozzle 0,4, 0,2 mm, 20% Infil, Printed in PLA, if you want it harder you should use PET First version 2 mm strong Second Version 3 mm strong
Wydruk około 2,19 €–2,67 € nettoWstępna wycena jednego wariantu
In need of some plastic scrapers to remove old gaskets from a motorcycle motor without damaging the mating surfaces, I didn't have any good options around. But, that's an easy problem to solve. I quickly drafted up four versions of a…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Aktualisiert am 20.11.2023: Neue Version "Ausrichtbolzen mit Sechskant" hinzugefügt. Jetzt können die Schrauben ohne zusätzliches Werkzeug angezogen werden. Updated on November 20, 2023: New version "Ausrichtbolzen mit Sechskant" added.…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wargame SkyScraper Building (Roof Updated/Fixed) The empires of the future won't be lived in caves. Quick assembled cities in the desert, made from plascrete, reinforced by plasteel. This is where the wars will be fought. This is where…
Wydruk około 0,77 €–0,95 € nettoWstępna wycena jednego wariantu
I don't often get snow, but when I did, I realized that I would need an ice scraper! My wife has been using the red one for years because it is compact and easy to store in the car. The model is based off that design. Try it out and let…
Wydruk około 4,05 €–4,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tired of scraping ice with a boring old scraper? Upgrade to the Red Devil Ice Scraper and watch that frost disappear faster than you can say 'hot damn!' Sacrifice some high-quality filament such as bloody strong Modified PLA, ASA or PETG…
Wydruk około 2,29 €–2,80 € nettoWstępna wycena jednego wariantu
If the ice scraper no longer works, you can hang it on the Christmas tree. Or print without this scratching edge and you'll have a Christmas tree ball straight away. And if you scale them by a factor of 40%, you get nice earrings. Use…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
I designed this ice scraper because I wanted something I could use to scrape and break the ice off your car windows. This is a combination scraper, breaker. It's angled to separate the scraper from the breaker. The angle also helps hold…
Wydruk około 3,69 €–4,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I know there are similar bed scrapers here but I wanted my own one I designed so here it is feel free to use it and make remixes
ice scraper in knuckles no suports needed
Fits multiple different types of print bed scrapers. The scraper should be similar in form to the ones in the pictures. Use the included G-Code, or create your own from the STL file. Happy Printing!
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
scraper with replaceable blades with magnetic grip on metal surfaces and hexagonal design
I wanted a holder where i can quickly access my Scraper. Updates: 2024-09-22: Added V2 of the Model with a more tight fit. Works great for the black and white Skadis Boards. Information for Printing: Use Support for the Hooks.
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
This is my version of an ergonomic printbed / build plate scraper. It is desigend to go easy on your fingertips even when pushing hard to loosen your model from the buildplate. The wedge has an angle of 20° and a smooth transition to the…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena jednego wariantu
My suggestion as a mechanical engeneer for a car ice scraper. Ergonomic design. Satisfactory grip size. Special slot for nailing.
It requies some little file work to match correctly base-heads. Sliced with Cura 5.6.0. Supports needed.
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
Ein einfacher Eiskratzer der jedes Eis bricht :-) A simple ice scraper that breaks any ice :-)
Please click ❤LIKE❤ if you appreciate my work 😊 Give your Monopoly Super Electronic Banking game a brand-new dimension! Instead of abstract cards or tokens, now you can physically see your investments on the board. This set includes: 🏢 7…
Wydruk około 7,66 €–9,37 € nettoWstępna wycena jednego wariantu
I needed something to peel off bookmarks without bending them. I slip these under the edge and twist to slice them away.
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
BOM: Printed with ROSA3D High Speed PLA Signal Violet A tough, reinforced ice scraper designed specifically for car windshields . The geometry focuses on durability, comfortable handling, and reliable performance in freezing conditions.…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sealant Scraper Tool - Thumb or Finger Replacement Part :) Keep your thumb or fingers free from sticky sealant when you finish it after application. The corners are identical for each provided tool in the range of 9 to 25 mm in diameter…
A Mini Scraper version 2 with an embedded 6x3 mm magnet. If you use the provide Gcode for a Core ONE it will stop at the layer needed to insert the magnet. If you aren't using that you can easily add a pause in PrusaSlicer. I used a 30%…
remove ice without removing gloves, ergonomic design for a comfortable grip and double face to scrape or break ice from car windscreen and more
Wydruk około 3,20 €–3,91 € nettoWstępna wycena jednego wariantu
this is the " easy scraper V1 " Just a simple scraper that i designed and tested. maybe you like it or not. Printed myself with PETG more versions will follow
Check out the 1 minute build video I made (my channel focus is building, making, and crafting): I did test prints in PLA and PETG - I recommend 0.15mm later height. Enjoy!
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dive into the world of de-icing with this unique windshield scraper! Inspired by the robustness of a backhoe shovel, this scraper is designed to tackle the toughest winter conditions. Its ingenious design offers an extended de-icing…
This two sided tool is used by my artist wife to create textures and scrape on her canvas. I put one in my tool kit to occasionally use as a probe or scraper in tight spaces. It is printed in PETG with organic supports.
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3D printed dragons do not have to be plastic waste - make a Useful Dragon that is super useful both before and after the novelty factor wears off. Even if it breaks or the print fails, the individual parts can be useful on their own.…
Wydruk około 4,96 €–6,07 € nettoWstępna wycena jednego wariantu
Info: remixed my previous remix so there are more hanging possibilities Btw i am using it now for various complimentary tools: Kaje's scraper printed at 75% advanced scraper 360deg scraper Print info: about any material, I did it with PLA
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
Print using filament or resin. For FDM, use a 0.25 mm nozzle with a layer height of 0.05 mm. Then glue the two parts together, followed by the legs. UPDATE 11/18/2025: I modified the de-icer legs to simplify gluing. Instead of gluing four…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena jednego wariantu
One blank version and one with a snowflake. Use your slicers build-in functions to add your personal touch with it! The pre-sliced has 25% infill
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
Dies ist ein einfacher Fugenkratzer, den wir auf unserem Balkon benutzen. Der Griff ist angeschraubt, so dass man den Kratzer bei Abnutzung austauschen kann. Zusätzlich werden benötigt: 2 x Zylinderkopfschraube M4 x 18 mm 2 x…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 5,94 €–7,26 € nettoWstępna wycena jednego wariantu
There's a lot of scrapers on printables.com - but this is my version. As always, there's a balance between higher heat (promoting better layer adhesion) and lower heat (reduced stringing, especially with PETG). For me, scrapers should…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Info: MK4 z-top-right-R2.stl customized to hold 4 or 5 nozzles and also scraper or any other tool optionally Print info: just like original, use PETG, 0.2mm layers, no supports
Printbed Scraper that uses a 85x54mm plastic card. The plastic card can be replaced without tools and both sides can be used. The advantage is that the plastic card is harder then printed structures but soft enough to make sure there is…
Wydruk około 2,33 €–2,84 € nettoWstępna wycena jednego wariantu
It's a mashup inspired by Low Poly Buddy and Frog Hex Scraper. I think most of us agree hex scraper is probably a bit better than default printables scraper, but wanted something very on-brand Prusa. I like the way this grips better than…
Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu
I wouldn't call something “The Ultimate Scraper” or anything, but after trying many of the highest downloaded ones on printables , I'm going to go ahead and use the Raker from now on. I have issues with carpal-tunnel and being able to…
Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu
Tired of having all of your cleaning supplies strewn all over your work bench? Do you have to reach to 4 places just to prep for a new print? Do yourself a favor and put all that stuff in one place! Compartments for: Standard Kimtech wipe…
Hexagon icescraper by sub3d
Wydruk około 1,62 €–1,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I use the "Nitoms Tape Peeling Cutter White T0860" to peel off the 3D printer print from the heat bed steel sheet. 3Dプリンターで印刷したものをヒートベッドスチールシートから剥がす際に、私は「ニトムズ テープはがしカッター ホワイト T0860」を使っています。 https://www.amazon.co.jp/dp/B07QF883Z9 I took a…
Object: Quite expensive car broom scraper bought on CircleK. Model: Schou 6866RS - telescopic scraper with rotating broom. Part: Lever for telescope. Description: The most expensive carscrapper from Circle K, looks great, works nice - to…
This is a holder for the Hex Scraper: https://www.printables.com/model/122894-hexscraper-printbed-scraper It goes on the back of the printer frame just above the electronics box, using two holes already in the frame. It's secured with two…
this scraper is shaped like a pen so it's comfortable to hold attribution (Markdown text) [pen‑shaped scraper](https://www.printables.com/model/1018976) by [sosasees](https://sosasees.codeberg.page) is licensed under [Creative Commons…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
The ICE-X Astro Ice Scraper - scientifically engineered for any atmospheric conditions, generated by human creativity and powered by AI assistance. Conquer the cold with the push of a button!
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
A simple cover for a Lutron wall-mounted drapery bracket. The cover enhances the aesthetics of your drapery hardware by concealing the unsightly wall mounting screws on the brackets. Cover mounts vertically against wall overtop of…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
my model is the first one I have ever made would you mind liking and sharing it to any friends who have a 3d printer
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Use these covers to hide the ugly support brackets which are used on several models of Forest Drapery tracks. The bottom portion of the cover fits under the bracket against a wall which is screwed in place during installation. The top…
BORING Scraper - Set For your bed scraping needs and more. We designed them for removing stickers and stuff from your buildplate, while being exceptionally easy to print. Design Cheap but competitive. Our design goal was to print these…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
I could not find a scraper sporting a hex pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…
News 2024-04-10: Please also check out my new Blade Dispenser for this Bed Scraper: This is the XL version of my popular Optimized Bed Scraper with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer! Each blade…
UPDATE 3.1.2023: added V2 version with different inner shaping → same external size & characteristics, quicker print Info: 🟠 round edge → longer edge → scraper lasts longer then other spatula types scrapers if it is less sharp on one…
About the Scrapers: With a length of 86 mm and a thickness of 5 mm, the scrapers are very compact. The grooves on the side of the handle provide a firm grip. The angle of the front wedge is 26.6° and is therefore quite robust. Of course…
Dieser Bed Scraper ist das ideale Werkzeug für alle, die ihre 3D-Drucke sauber von der Platte bekommen wollen. Es wurde speziell entwickelt, um das Druckbett vorsichtig zu reinigen und fertige Drucke sicher zu entfernen, ohne die…
It's -8℃ currently where I am. I needed a new ice scraper. It's strong and I've gone through several iterations to get it to feel comfortable in the hand. There are ribs along the handle for better grip as well as a large indentation at…
News 2024-04-04: Upon request, I designed an XL version of this scraper with 30% longer blades: News 2024-03-10: Please also check out my new Blade Dispenser for this Bed Scraper: Optimized Bed scraper with replaceable blades Since the…
This innovative tool simplifies print removal with its user-friendly design and unique features. The random pattern design ensures fast print times. No supports are needed, as the model will print fine without them. Durable and reliable…
CIUNCARELLO boats a distinctive design and features that sets it apart from conventional bed scrapers, making it the ULTIMATE Accessory for your 3D Printing needs. 8x6mm Magnets are strategically placed at both the front and back ends…
This is a useful Blade Dispenser for my new Optimized Bed ScraperXL with replaceable blades. The dispenser holds 44 blades and has a hook to which the bed scraper can be attached. Double-sided adhesive tape can be used to attach the…
Note added Oct. 5, 2021 : As some people have had problems printing this without infill, I have added files for 15% rectilinear infill. This scraper can be safely used on the build plate with little danger of scratching or gouging the…
PLEASE READ THE PRINT INSTRUCTIONS! TRIM IT AND DON‘T GIVE BAD RATING JUST BECAUSE YOU CAN‘T READ INSTRUCTIONS! After printing i cut the front of the shaper to make the tip a little bit more stiff and when cutting it angled it will be…
A quick but sturdy print bed scraper that's intentionally long with open infill so that you can also use it to swipe at the purge material. It will catch in the infill and drag away cleanly. To fit the Prusa Mini use the 3mf and scale to…
Description Tired of struggling to remove prints from your 3D printer bed? This ergonomic and durable bed scraper is designed to safely and efficiently lift prints without damaging your print surface. Whether you're using PEI, glass, or…
ULIMATE Print Bed Scraper/Windshield scraper wide and narrow versions! print at 0.16mm layers or less for best edge. Don't forget to- like share print and follow!
BOM: Printed with ROSA3D Starter PLA Black Ditch the dangerous metal spatulas! This 3D printable plastic scraper is the perfect tool for safely popping stubborn prints off your build plate without risking deep scratches on your PEI,…
🔥 UPDATE: V2 NOW AVAILABLE! An improved version (V2) featuring new side-grip grooves for better control is now out! 👉 Get the new V2 version here: This is a bed scraper / print removal tool designed to safely and efficiently remove prints…
Skyscraper modeled onscreen on YouTube. I used PLA, 0,10 mm layer height and 0.4 mm nozzle. You dont have to use any supports and 5 % infill is fine. In this configuration, it will take roughly 17 hours to print.
This modular scraper is designed especially for 3D printer bed cleaning – perfect for removing filament residue, glue, or adhesion products from the build surface. It can be used with a standard Stanley blade or with various 3D‑printed…
Anyone who has a Bambu has a love/hate relationship with the Scraper tool. It's awesome. But it sucks because they give you a magnet for it that has to be the weakest magnet known to man. Plus is a aluminum printer… so? Anyway, the…
I really like the Prusa spatula for its aesthetics and low filament consumption, but it could still be better. Enter the Prusa printbed scraper 2.0. I've reduced the material even more by cutting out triangular sections in the handle and…
The Micro SD Ejector is great, but I kept losing it because it's small. I Used Tinkercad (because I'm a simpleton) to add the ejector to the scraper. Printed at .12mm and 3 walls, takes 18 minutes and uses 3.79g of filament.
I was about to make the beloved hex scraper (since the one that came preloaded on my X1C was kinda garbage) but I thought to myself why should I print a nice scraper if I'll have to print a full one again every time the blade goes bad.…
Simple printbed scraper with Flashforge logo. Must have tool to remove stubborn prints and/or purge lines from the printbed. Layer height:0.12 Shells/walls: 3 Infill: 15%
This is a low-profile bed scraper designed for safely removing 3D prints from build plates. The ergonomic handle provides a comfortable grip while allowing precise control during print removal. The scraper features a wide, thin blade that…
Prusa bed scraper inspired by the iconic Prusament spool design. Perfect for safely removing filament residue and prints from the build plate Check out these cool things too!
This bed scraper is perfect for removing small blobs, filament strings, and leftover adhesive. 🔧 Practical & Efficient Available in 3 different sizes to suit any printer setup Lightweight and easy to handle Helps keep the build surface…
Ready for multimaterial or you can print only scraper_main.stl without words 3mf file for multimaterial included
ENGLISH Introducing FlexiScraper : the ultimate solution for effortlessly accessing low-profile prints and stubborn support residue. Engineered with precision, its sharp edge glides seamlessly beneath prints straight from the bed. With…
How about this scraper to replace your fingernails? This is a round design scraper useful 360 degrees. Compared with a spatula-shaped scraper, the amount of filament used and the time required can be greatly reduced. It is intended to be…
This is a small and easy to print scraper tool, inspired on 2 pre-existing models: Bed Scraper by JernejP . HexScraper - Printbed scraper by visle The idea was to create a model, easy to print and small, since it is an object with high…
Hello Everyone I am sharing two versions of the modified Bambu Lab Scraper. I was annoyed with the original version because the Logo was placed on the wrong side. It should be visible when using Scraper. In addition, the project contained…
Blade Scraper Print the Blade Scraper without top and bottom infill for such a beautiful design (honeycomb infill). You need to print the white ring 2x and insert it from each side into the hole. Additionally, you will need a utility…
I made this spatula to lift objects off my print bed without damaging the bed surface. It has round edges to not cut into the surface and is thin enough to do the job. See Print Settings for optimal results. Print Settings Printer Brand:…
A better scraper it is. Why would so many makers print a scraper? I've never used one since my flexible print bed and my tiny fingers work fine (don't you ever touch the print bed). Ok, it must be some kind of fetish appeal. But…
A plastic razor blade. Inspired by the incredible plastic blades made by Scraperite. Can be used for all sorts of stuff.
Another Removal Tool (Bed Scraper) A simple and practical 3D printed bed scraper designed to help you safely remove finished prints from your printer bed without damaging the surface or your models. This tool is lightweight, comfortable…
Remixed from the version uploaded by @ericsnis Follow Iterative revision to both suit my aesthetic preferences as well as added a slight functional upgrade with the new grip texture on the sides. Images show it printed with: 0.2mm layer…
30% infill 0.20 detail http://www.thingiverse.com/thing:3406899
Popular hexagonal scraper - now for defrosting car windows You can choose between a regular version of the scraper (which is in one piece) and a version with replaceable "blades". Both modified to make the scraper stronger and to allow…
