Liczymy pasujące modele…
IMPORTANT NOTE: 3D-printed plastic screws will break. Because of the way a 3d printer works, and the way the screws are typically oriented during printing, they are very weak. Things like printing in PETG, adding more perimeters, and…
This case is for the Raspberry Pi 5. At the rear end you can easily use the power button and view the led indicator. At the bottom you can fit M2.5 nuts and use M2.5 bolts to secure the board. There is a version with air-vents in case you…
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
This is a case for Raspberry Pi 3B+/4*. You can choose between two covers with different patterns. The cover with the hexagonal pattern can be dual color, if you use the add color change feature, in PrusaSlicer . The covers are snap fit.…
For Raspberry Pi Zero W so you can use Octoprint with your MK3/MK3S/MK3S+ printer. https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180 If you prefer a step-by-step guide, it is available here:…
This is a pretty tight fit and snaps in place nicely. The case was designed with the official active cooler in mind; there is an intake vent for the fan, exhaust vents at the back and some more vents above the radiator to help with heat…
Print or use to make new things
Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…
NEW Updated version here: Raspberry Pi 4 Case U will need: Case - M2.5x10 self tapping screws X13 Pi - M2.5x6-8 self tapping screws X4 Mounting Case - M5x10 BHCS or SHCS X2-4 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4 Here is a Accu…
Print or use for making other models
🛠 3D Printable Parts for 40x40 Extruded Aluminum Mount You can 3D print M5 nuts and bolts for use with 40x40 extruded aluminum using the models below: 🔩 M5 Drop-In T-Nut 📎 https://www.prusaprinters.org/prints/3246-m5-drop-in-t-nut 🔧 M5…
24.05.2021 update: case was designed for the raspberry pi zero W, it will not fit the older raspberry pi zero (different SMD board layout). a remixed version that will fit the old pi zero and also adds cut outs for the pin header can be…
There already is a plethora of raspberry pi cases on the internet and the last thing we need is yet another one ... well - I created one anyway ... because I wanted to and I had a lot of fun doing it :-). I tried to achieve the following…
Raspberry Pi 5 Case Inland Filament Used: Raspberry Red PLA+ Raspberry Red PLA+ on Amazon Printer Settings: Nozzle Temp: 220° Bed Temp: 60° No Supports 15% Infill Print Time: 1 HR 15 Mins Speed: Standard Bambu Settings Measures 92mm x…
A RaspBerry Pi 4 case designed to optimize the airflow around the board and to keep it well cooled without the need of a cooling fan. From the hestetical point of view, it is recommended White PLA, but it can be printed in any color you…
Appleberry G5 - Miniature Classic Cheese Grater I’ve always been a fan of the sleek, industrial look of the Apple Power Mac G5 and the Mac Pro 5.1—those aluminum beasts are just iconic! So, naturally, I’ve been dreaming about having a…
Its the best i could model it, diamensions based on the chips and parts built into the new 5, board based on the old 4
A basic model of a Raspberry Pi Zero 2 W designed to be 3D printed or added to your CAD Model to confirm dimensions and placement of features. Amazon link to purchase a Raspberry Pi Zero 2 W once you have confirmed all of your dimensions.
U will need: Case - M2.5x10 self tapping screws X13 Pi - M2.5x6-8 self tapping screws X4 Mounting Case - M5x10 BHCS or SHCS X2-4 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4 Here is a Accu Components link for all fixing listed above.…
2025-06-07 - Added case file with no logo Remodelled raspberry pi 4 case from microcenter.com and updated by my liking. More ventilation micro SD card adapter slot Cutout for LEDs Tighter tolerances for tighter fit. Print instructions…
A simple 2 parts snap-fit case for Raspberry Pi Pico. No screws needed. Back of case is open for wires. I use it to connect 2 ADXL345 and do the input shaper in Klipper Print settings: layer: 0.16 or lower perimeters: 3 To connect 2 ADXLs…
This is a 1U Server Rack rack/shelf designed initially to rack mount a bunch of Raspberry Pis. Each 1U shelf should hold up to six Pi 0/3/4/5 or some mixture with accessories. Every attempt is being made so that no supports should be…
U will need: Case - M2.5x10 self tapping screws X8 Pi - M2.5x6-8 self tapping screws X4 Mounting Case - M5x10 BHCS or SHCS X2-4 4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4 No supports are needed for this design. Red faces can be…
A remix of Sneaks excellent ‘Articulating Raspberry Pi Camera Mount’ -camera housing to suit the new v3 Raspberry Pi camera. The V3 camera has a much bigger sensor and comes with autofocus- quite a big upgrade from the V2 camera. However,…
Easy to print solid Raspberry Pi 2 or 3, Official 7 inch touchscreen case. I wanted to keep the black bezel look of the screen and not making it bigger. You will need 4 M3x6 or 8 screws to secure the back cover. There is room inside for…
Update 08/02/2023 - I have added a ‘Wide Angle Camera’ version, the lens has a larger diameter than the standard so will need to be taken into consideration on some designs. I don't have a physical v3 wide camera, and have just gone off…
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 *** New case for Raspberry Pi Touch Display 2 *** Updates Alternative top case part with additional slot for camera ribbon cable, see subfolder "case top v2". Features Internal fan…
[1/27/2026] – Update (v4) Increased top SMA pass-through diameter to allow full seating of the SMA nut (hex socket compatible) Added internal thread to the previously unthreaded corner through-hole [11/29/2025] – Update (v3) Widened SMA…
First of all, thank you for clicking on and maybe printing my model :D Pi 5 case, following the design of my Pi 4 case . The top and mid-frame remain unchanged. For FDM printing i recommend PLA or some other stiff fillament. !!! Official…
This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…
Simple Raspberry PI 2 (W) case with honecomb air vent holes. Use 4x 3x14 screws and 6x 3x3x5 brass insert nuts. Upd: added v2 version with hidden screws
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place Screwless Jack…
Raspberry Pi Pico Case. Two versions, one with the pins facing up and one with the pins facing down (pictures only show pins facing up version right now). Make sure you download the correct files because the different versions are not…
I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…
2 part sleeve case for the Raspberry Pi 3, their spilt in the middle of the headphone jack. The 2 parts of the case slides over Raspberry Pi, and held together by friction between the 2 part of the case and the Raspberry Pi. So no need of…
Fits Raspberry Pi 4 B and Hat (SenseHat) This Case also snaps to Domed Top from ... "Raspberry Pi4B Case for Noctua 40mm x 10mm Fan" Toggle and access for camera and GPIO and Toggle. Screws... Pi takes M2.5 (a set of 4 screws and nuts…
The newly released Raspberry Pi 5 is a significant upgrade from its predecessors, offering enhanced performance and connectivity. To complement this advanced board, we've created a new 3D-printed case prioritizing both airflow and…
One more case for Raspberry Pi Zero. This is simple, compact and quite rigid. The cover part has press fit with the main case. The board sits on four pins and from top is pressed by the cover part. Nominal clearances between the board and…
Thanks for checking out my work. If you like what I'm doing please give it a like and consider buying me a coffee ! For those in Australia without access to a 3D printer you can order the full 3D printed parts set from me here. Retro…
Raspberry Pi Case with voronoi snap fit lid printed with Geetech 30T
A quick printing case for the Raspberry Pi Zero 2 W The Zero 2 W is a great little workhorse but who wants a bare board sitting around? Cover it up with this minimal case. This case is primarily printed flat with fold lines designed in…
U will need: Case - M2.5x10 self tapping screws X7 Pi - M2.5x6-8 self tapping screws X4 Mounting to 3060 extrusion (30mm spacing) - M5x10 BHCS or SHCS X2 No supports are needed for this design. Red faces can be removed for wire/ribbon…
A sleek, functional enclosure designed for the Raspberry Pi 3 Model B / 3B+ . High-performance cooling meets a minimalist, screwless design. ✨ Highlights Toolless Assembly: Precision snap-fit mechanism. No screws needed. Active Cooling:…
PiMesh4 is a Raspberry Pi 4 case with a geometric mesh pattern that is easy to print. This is a mostly toolless design with a friction fit. There are two versions of the model – one totally toolless – one that utilizes a single m2…
Reference model of the 7" Raspberry Pi Touch Display 2 based on the official drawings and measurements of sample unit. Provided in Solidworks (Original), STEP, and STL (with and without a Pi 5) Pi 5 model is not mine, it is from Elecrow .…
This stand is loosely based on some other simplistic designs I've seen for the original Touch Display, but it is based on the new dimensions of the Touch Display 2. It is a simple leg design that you print twice, and it has a cutout in…
Greetings, fellow enthusiasts! I'm thrilled to share this 3D printed Raspberry Pi NAS project with you. I hope you find it not only enjoyable but also adaptable to your unique requirements. I am always eager to receive feedback to enhance…
I really like pyrho's snap fit case, but my NVMe HAT wouldn't fit, so I decided to remix it. I remixed the original model to fit the 52pi N04 M.2 2280 PCIe To NVMe HAT specifically, but other HATs can fit in the case fine as long as you…
A case for the Pi Pico, Pico W, Pico 2, Pico 2 W. Supports soldered headers but does not support the official Pico 2 WH (see below for alternatives). Snaps together. Allows the BOOTSEL button to be pressed. Useful when the Pico needs to…
A 10-inch rack mount for two Raspberry Pi devices. Compatible with RPi 2B, 3B, 4B and 5B. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a…
This is the mount I designed to house a Raspberry Pi and display in the wall to control my Smart Home. The idea was to get a flush, professional-looking installation that makes the display feel like it was always part of the wall —…
I made this Raspberry Pi 4 OctoPrint case mount for Prusa i3 MK3/s frame. The bracket is merged to the meshed bottom of the case and fits exactly on the m3 threaded holes in the prusa frame. You can find suitable housing tops from me Haz1…
Printsettings: Layerhight: 0.2mm No Support Needed No Screws needed. New: New lids and cases for various uses. All variants can be combined with each other.
I recently received the NVME Base by Pimoroni for my Raspberry Pi 5. I noticed that there are only a few cases which accommodate it. I was sure that I could remix a nice case to change that. Here it is… Update: Added different bottom…
TLDR Raspberry pi camera mount for the voron 0 / voron 0.1 Get up close and personal with the nozzle & the print bed (>80% visible) Easy mounting with 1 M3x16 screw, 1 M3 nut and 1 M2x6 screws NO PRELOADING OF NUTS thank goodness! No…
This is a modification to the Original Prusa I3 MK3/MK3S Einsy case that implements appropriate housing for a Raspberry Pi 1B+/2B/3B/3B+/(4B - Now available as the first download ). This part allows for one of the aforementioned Raspberry…
Case for Raspberry Pi and Sense-Hat board SenseHat NOT required! Breakaway Supports included. New .35mm smaller Z, led window, pop-outs for joystick and GPIO, camera slot and insert cover, io ports edited. Snaps together Bracket for Case…
While slicing, I used supports for the SD card slot and the screw holes but it's possible they may not all need supports. After printing, poke holes through the thin top layer that is covering the screw holes. Use care when adding the lid…
The ICECASE SLIM Pi 5 is a cutting-edge slim case tailored for the Raspberry Pi 5, housing a premium Noctua 4010 5V fan. This sleek enclosure ensures optimal cooling efficiency and sleek aesthetics, without loosing the functionality of…
Fractal Design uploaded the files for their model on their website : https://www.fractal-design.com/north-pi-3d-files/ This is my take on the Fractal baby north. EDIT 3 of August 2024 Added a BBT pi 2 version (for the tray & foot use the…
This is a nice sturdy case for the Raspberry Pi 4 Model B that has all the features I wanted to see: Pi drops easily into place, then is secured with M2.5 self-tapping screws. Top clips on securely, but is easy to remove. Vent holes for…
Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…
LRS-200 : M4x5-8mm BHCS, SHCS x4 *8mm bolts may too long, be careful. RS-25 : M3x5-8mm BHCS, SHCS x 2 *8mm bolts may too long, be careful. raspberrypi : M2.5x5mm or longer BHCS/SHCS x4, designed for considering self fixation without using…
Hallo, ich teile hier mein Gehäuse für einen Raspberry Pi 4 (ModelB). In den Deckel passt ein 40x40 Lüfter. Ich habe einen 5v Noctua genommen. Aber andere Noname 40x40 Lüfter passen auch. Ich habe ein paar Bilder aus dem Slicer beigefügt.…
This model is intended to be used as a CAD reference in designing cases and peripherals for the Raspberry Pi 5, as I could not find another model to use for my own designs. This model is by no means exact, and measurements for components…
This case is designed for a Raspberry Pi 4B. Integrated into the design is a 5V 4010 fan for cooling. I added a second version with the GPIO pins exposed by user request. I haven't tested this version myself, but it shouldn't have any…
This is a single component file with enough detail for developing cases, projects, and peripherals for the Pi Pico 2W. This is not a PCB file, nor is it representative of all surface-mount components- many tiny capacitors, etc. were…
Marius' really nice Zero W2 case model only comes with a screw-fit back, whereas their Zero W case comes with either snap-fit or screw-fit backs. I tried using the back from the latter model but the pegs were slightly too large (~2.4mm).…
This is a case for Raspberry Pi 3 Model A+ and Raspberry Pi 1 Model A+. The dimensions of the case are 72 mm x 60 mm x 20 mm. It consists of two parts (a base and a lid) and has been designed to be fully covered with only cutouts for…
NOW UPDATED WITH SIMPLER UNIVERSAL POWER SWITCH DESIGN INTRODUCED IN BENDER2 Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro…
This newly designed camera case for the Raspberry Pi Camera Module v2.1 features a precise press-fit design. The 3D-printed components snap together cleanly, eliminating the need for glue or screws. Inspired by the Adjustable/Rotating…
You want options? We got them! The configurations here support the official air cooler, the Pimoroni NVME, and provide options for more vents and access to GPIO. Take a look! The case is secured through metal or printed standoffs, for a…
Ender 3 V3 SE Cable Holder + Raspberry Pi Mount Used this RPi case: https://www.thingiverse.com/thing:1956623
This is a quick remix from one of the most used Raspberry PI 2/3 cases to fit the new Raspberry PI 4. Original Design: https://www.thingiverse.com/thing:922740 I made the first design based on the uGreen micro-HDMI to HDMI adapter.…
This model was inspired by another model https://www.printables.com/model/924041-raspberry-pi-5-case-with-pineberry-hatdrive-bottom , but it's not a remix. The case was designed completely from scratch (no reverse engineering). The case…
Case is for Raspberry Pi 5 used with official active cooler and official M.2 Hat. For assembling, use longer screws from M.2 hat kit to the bottom part of the case.
Display case and stand for Raspberry Pi Touch Display 2 and Raspberry Pi 5 I have not tested with a Raspberry Pi 4 - it might need some tweaks so if this design is popular I'll do one that fits a Raspberry Pi 4. Easy to assemble - just…
I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…
A remix of 0110-M-P's excellent Raspberry Pi case to remove the VESA mounting tabs and replace with a DIN rail mount. The enclosure mounts the Raspberry Pi on the rail vertically, sideways on, with SD card slot facing up and connectors…
A 2-piece case for Raspberry Pi 4, with fan mount. STL is in two versions, one leaves the GPIO pins accessible, the other does not. The STL is flat and with no writing, the grid texture you see was done in Prusa slicer, so you can do it…
The mounting is done by clipping in the bracket and can be moved forward or backward if necessary ... I thought I could print the bracket I had designed for the Prusa MK3s. It fits too, but very tight, so it is very difficult to move.…
Preview: https://a360.co/3ff4kZl
Designed for Octoprint If you are looking for a nice Octoprint case, this is right for you. Also, RaspiCam is supported! Updates 01-16-21: New version available! All suggestions have been accepted and implemented in the new version.…
A case for a Raspberry Pi 4 Cluster. Components used in project: 5x Raspberry Pi 4 Model B 5x PIMORONI Aluminium Heatsink Case 5x Belkin - USB-A to USB-C cable 15cm 5x Network cable 12cm 1x Netgear GS108Ev3 1x ANKER 60W 10-Port Desktop…
Mounting Plate for a Raspberry Pi 4 to be mounted on a DIN Rail. For the original Fusion 360 model, see https://github.com/uwearzt/fusion360/blob/master/parts/Lab/RaspberryPi/DINRailMount.f3d or download the Step file…
The mounting holes for the BTT Pi 1.2 are measured directly from the STEP file in BTT's GitHub repository, as they differ slightly from a regular Raspberry Pi. To mount the boards, you will need: four M2.5x8 screws (or M2.5x4 when using…
Print Settings: PETG or PLA 0.15mm 15% infill M2 x 5mm (Countersunk screw) x 4
Designed for Ender3v2 to mount behind the LCD screen. I would imagine this works with other Ender 3s but I cannot confirm You'll want to use supports for the rails If you're looking for a mount to go in middle to replace the drawer, see…
Snapfit case, but with honeycomb pattern. Enjoy!
Remixed from the amazing @BBTECH design. Many commenters complained for too small movement range for the clip. The range was extended by 3mm and now it clips with ease. You can still use the screw to lock it in.
This thing is a reference model of the Official Raspberry Pi 7" Touch Screen Display. The parts modeled in this thing are available here: *This site contains affiliate links for which I may be compensated Official Raspberry Pi 7"…
Raspberry Pi Camera Stand Because this camera has a large focal distance and fixing the device in the printer frame does not provide the best image. This stand allows other uses to the camera. Features Compatible with the official Pi…
RPi 'Z-BOX' The RPi Z-Box, designed for the 4B, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…
2 part sleeve case for the Raspberry Pi 4, their spilt in the middle of the headphone jack. The 2 parts of the case slides over Raspberry Pi, and held together by friction between the 2 part of the case and the Raspberry Pi. So no need of…
A simple Raspberry Pi 1 case created in OpenSCAD. The scad file contains Raspberry Pi model.
Since apparently no-one makes or sells cases for the old first gen Raspberry Pi Model B anymore I decided to create one on my own. It's a rather simple and functional design but has everything that it needs. The case is held together with…
Simple Case for the Raspberry Pi5 that prints easily and looks great. There is provision for the official active cooling . No supports required Snap fit no screws required Can be securely closed with M2.5x8 countersunk screws (optional)…
Case for Noctua 5V 40x10mm 4 pin Fan... Snap together assembly, no screws required. CPU stays very Cool. 36C during stress test (100% Fan) Screwless! Frame4Fan-SimpleNoScrews-Assy Frame with posts, does not require screws for the case and…
This is a remix of the great Raspberry Pi Case Top of Malolo . We've had a good cooperation over the last few days and have worked on the design and new ideas to make the case even better. So the idea to integrate a fan without the ugly…
Update 2: I've added multiple versions with slots for the camera cable and display cable. This means that now all possible usage combinations for GPIO, display and camera can be used. The .STL files indicate what slots are present in that…
