P
PrintablesAccessible RC
EDIT JERRY CAN FUEL CAN TRX4 SCX10 K5 RC4WD SCALE RC
20L Jerry Can
- Pobrania
- 549
- Polubienia
- 70
- Ocena
- 5
Wyniki wyszukiwania: rc4
Liczymy pasujące modele…
P
Printablestesla3dlabs
#RESISTANCECOVID RC4 - Prusa Protective Face Shield - RC1 RC2 RC3 RC3.1 - easy shield FIXATION & ROTATION
REMIX RC1 RC2 RC3.1 shield face protection from Prusa without any hole to do in the shield and compatible with any 150 x 150 printer (medium model) REMIX: https://www.thingiverse.com/thing:4233193…
- Pobrania
- 401
- Polubienia
- 0
- Ocena
- 4
P
PrintablesCranklotus
RC4wd 2 door Mojave Hilux mount for Vanquish VRD
All 3d files should be free. Enjoy this 2 door mount for the Mojave onto a VRD. Print with alot of walls for strength if needed.
- Pobrania
- 242
- Polubienia
- 20
- Ocena
- 0
P
PrintablesCranklotus
RC4wd K10 Chevy mount for Vanquish VS410 (also works for xtracab)
Mount yer K10 chevy from rc4wd to a vs410 chassis from Vanquish. (also works for Toyota xtracab) print with like 6 walls for strength if needed.
- Pobrania
- 215
- Polubienia
- 9
- Ocena
- 0
P
PrintablesLonnie Blanchette
SCX10.2 to RC4WD Xtra Cab body mounts
Hey everyone, Here's some side trays/body mounts to install a RC4WD Xtra Cab body onto an Axial SCX10.2 chassis. Just slide some basic M3 nuts into the slots and you're ready to drop the body on. (You can either run the bolts like studs…
- Pobrania
- 209
- Polubienia
- 21
- Ocena
- 0
P
PrintablesAngrysquirrel
RC4WD Trailfinder 2 Bed Topper
RC4WD Trailfinder 2 bed topper. I printed the topper with the front on the printer bed, use CURA to lay flat the trim and door. Used old packaging for the windows. Servo tape to connect to bed of truck. Mirror the side trim for the other…
- Pobrania
- 202
- Polubienia
- 23
- Ocena
- 0
P
PrintablesDioptase
Adjustable bands for Prusa RC3 and PRO (RC4) face shields
The Prusa face shield is designed to use elastic bands. But if elastic is unavailable, these snap on bands can be adjusted to the the users head size. Like a baseball cap. Unlike elastic, they are nonabsorbent and will not be affected by…
- Pobrania
- 198
- Polubienia
- 2
- Ocena
- 5
P
PrintablesAndoo
RC4WD Mojave Custom Grill
This is a one-piece print that will screw on directly to a RC4WD Mojave body. I printed this standing up with tree supports.
- Pobrania
- 132
- Polubienia
- 10
- Ocena
- 0
P
PrintablesRevellio
RC4WD Trail Finder 2 - Chassis Parts / Update 16.08.2026 - New Skid for TF2 11.3"
General Description: Parts are for different wheelbases, pay attention to the description. SWB - Short Wheel Base, NWB - Normal Wheelbase, LWB - Longe Wheel Base. L and R mean left and right. Most parts are available for both sides; if…
- Pobrania
- 131
- Polubienia
- 24
- Ocena
- 0
P
Printablesstrohbi
RC4WD 1987 Toyota XtraCab Rear Cabin
Hello Everyone, I have designed this Cabin for my friend thomas_peat (you should definitely check out his instagram page @thomas_peat). It was designed for the RC4WD Toyota XtraCab 1987 Hardbody. The design has a "complete" version to…
- Pobrania
- 125
- Polubienia
- 13
- Ocena
- 0
P
PrintablesArda Özcan
RC4 prototype (what I would consider)
This model is what I would want to see on RC4. It is a revised version of face shield RC3 from Prusa based on the feedback I received from several doctors. Additional features are as follows: -Slightly inclined front plate to cover…
- Pobrania
- 111
- Polubienia
- 1
- Ocena
- 0
P
PrintablesQfrcy
RC4WD winch mount for Boomracing BRX02 109 & 88
Do you want to mount your RC4WD winch onto your BoomRacing BRX02 109 or 88? Look no further! Printed in 0.16mm layer with 75% Gyroid infill for max strength.
- Pobrania
- 108
- Polubienia
- 11
- Ocena
- 0
P
PrintablesFabianR
Edited Inner fender for RC4WD Gelände II D90
die hinteren Fender angepasst. the rear fenders adjusted.
- Pobrania
- 108
- Polubienia
- 3
- Ocena
- 0
P
PrintablesInsaneNemesis
RC4WD LOW PROFILE SHOCK MOUNT
Super simple shock mount that allows you to get the top of the shock inline with the frame for flush body mounting. I printed with 100% infill for strength. Use 70mm shocks to maintain full suspension travel.
- Pobrania
- 94
- Polubienia
- 14
- Ocena
- 0
P
PrintablesRevellio
RC4WD Gelande II Chassis Parts + D90 & Cruiser Body Parts
General Description Most parts marked L and R for left and right. LR parts fit or must fit both sides. However, some parts need to be mirrored in the slicer. Almost all holes are designed for M3 screws. Sometimes nuts are needed, but…
- Pobrania
- 90
- Polubienia
- 17
- Ocena
- 0
P
PrintablesPricFlair
SCX30 Real beadlock wheels for 0.7" tires like RC4WD
After making a set of functional beadlocks for stock tires I adapted them to fit the larger RC4WD tires. These work and fit like my previous beadlocks, and I've copy and pasted most of the assembly info down below incase you havent seen…
- Pobrania
- 86
- Polubienia
- 9
- Ocena
- 0
P
PrintablesZanthrax
SCX10II mount for RC4WD 4Runner body
Chassis kit: https://www.axialadventure.com/product/1-10-scx10-ii-4wd-raw-builders-kit-v2/AXI90104V2.html Body kit: https://store.rc4wd.com/RC4WD-1985-Toyota-4Runner-Hard-Body-Complete-Set_p_7220.html The rear hinge comes in 2 parts. Use…
- Pobrania
- 84
- Polubienia
- 21
- Ocena
- 0
P
PrintablesInsaneNemesis
RC4WD TF2 KillerBody LC70 Fender Liners
Fender lines for the TF2 using the killerbody LC70, I printed with PETG because of the heat from the motor. Fits loosely under body and allows for adjustment depending on body mounting.
- Pobrania
- 83
- Polubienia
- 10
- Ocena
- 0
P
PrintablesRevellio
RC4WD Mojave II - Body Parts / Update 29.08.2026 - Shock-Tower Cover and Battery Box Combo
Hard Tailgate Logo I mounted the logo on two crawlers, variant 1 works better for me and looks cleaner. In variant 2, the glue dissolved the paint a bit (picture 1). Variant 1: Place the template on the tailgate and mark the letters.…
- Pobrania
- 81
- Polubienia
- 16
- Ocena
- 0
P
PrintablesSteveW91
Aircon Remote Wall Holder for Daikin ARC452A4
Aircon Remote Wall Holder for Daikin ARC452A4
- Pobrania
- 78
- Polubienia
- 5
- Ocena
- 0
P
PrintablesHummelsumse
SENA RC4 remote Holder
This Holder is made to mount the SENA RC4 remote on a 22mm Handlebar like BMW uses (modification possible, step file included). Use PETG or similar not suitable for PLA.
- Pobrania
- 63
- Polubienia
- 0
- Ocena
- 0
P
PrintablesQfrcy
RC4WD Winch controller mount
This is a mount to fix your RC4WD winch Remote if you don't want to fix it permanently. The remote is fixed securely, so you don't risk losing it but it is still easy to take it out of the mount thanks to the clipping system.
- Pobrania
- 56
- Polubienia
- 9
- Ocena
- 0
P
PrintablesTolga Toykoç
RC4WD TF3 Servo Relocator
Everybody who owns a RC4WD Trail Finder 3 knows that the biggest problem of the chassis is the steering. I was trying to solve this problem and I knew that the biggest issue was that huge engine. After cancelling the engine using Rc4wd…
- Pobrania
- 55
- Polubienia
- 4
- Ocena
- 0
P
Printablescrawlnyc
RC4WD Trail Finder 2 SWB rear stretch mount
This is a rear stretch with integrated bumper for the RC2WD Trail Finder 2 SWB. The uploaded version does not have the logo for copyright reasons. I added two mounting tabs and posts that mount similar to the stock wrangler body. New…
- Pobrania
- 53
- Polubienia
- 18
- Ocena
- 0
P
PrintablesRevellio
RC4WD K10 & Blazer - Body Parts / Update 15.09.2026 - Blazer Rear Window Frame
Blazer Bet Mat The body was mounted on 10 chassis and has 200 holes in the bed. The mat cover that. There is a normal version that ends at the bed and an extended version that closes the gap between the bed and the seat. Blazer Rear…
- Pobrania
- 46
- Polubienia
- 9
- Ocena
- 0
P
PrintablesKorvette
Bit holder for soft grip snap on srewdriver (SGDMRC44B)
Remix of the snap on hard handle screw driver bit holder, just insert it in the hex hole in the cap. You can add a little bit of double sided tape to be sure it really doesn't move
- Pobrania
- 43
- Polubienia
- 6
- Ocena
- 0
P
Printablescandrist
Prusa RC4 with Visor and Loops
In speaking with Doctors they wanted some modifications to the shield: Visor for added face protection. Wider shield for better coverage on the side of the face. Ability to use materials found in the hospital for a strap. We solved this…
- Pobrania
- 42
- Polubienia
- 0
- Ocena
- 0
P
PrintablesNight_Hawk02
Losi Nascar Mylaps RC4 Transponder Mount
This is a mount i made and have been using for the Mylaps RC4 Transponder i use on my Losi Nascar chassis. I used 2x M2.5x10mm screws to install it into the existing holes on the front splitter. the transponder fits great and is not to…
- Pobrania
- 37
- Polubienia
- 2
- Ocena
- 0
P
Printablesitstoobright
4-link axle truss/link mount for RC4WD K44 axle
Made this for a custom build of mine, so I can't guarantee that it will be compatible with production chassis.
- Pobrania
- 32
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBradW
RC4WD BigDog Trailer Wheel Insert
Prints in 54mins. Fits perfect into the RC4WD 1.55 Dirt grabber tires. These add support to the tire. The stock tire with stock foams fold over with nothing on the trailer. Add a vehicle to the trailer and the tire is flat. I did cut…
- Pobrania
- 30
- Polubienia
- 9
- Ocena
- 0
P
Printablesllanterner
Soporte carenado Honda VFR 800 FI RC46
En el taller perdieron la pieza metálica que sujeta el carenado (no volveré a llevar la moto nunca más allí). El carenado a veces temblaba. Por ello necesitaba una piezapara sustituir a la perdida. La moto es una Honda VFR 800 FI RC46 del…
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBenDaSpur
RadioLink RC4GS On Off Switch
I included the step file because someone smarter than me can use this as a base to make a better working version.
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesCeasar
VFR800 RC46 speedo socket
My adapter for speedo was worn out so made a simple 3d model to replace it. Now driven 2000km on it and seem to hold up good in PETG.
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAlecks
VIOFO A229 / A239+S+T / RNE800 / RTC300 / RC400 / Rear Dashcam Mount Clip
Hey, i upgraded my Dashcam to a VIOFO A329 and now the original design doesnt fit anymore. So i re-designed the clip with a mount for the new rear cam. Use the Mount file from the original design. Now you can screw the Dashcam directly to…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
Printablesjonbush
Phidgets Platform Load Cells Mockup/Dummy FRC4140_0, FRC4141_0, FRC4142_0
Useful for verifying that the load cell fits in your application before purchase/delivery.
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRevellio
Hubcaps (Radkappen) for RC4WD 6LUG 1.9 Stamped Steel / Clones also fit
The hubcaps fit RC4WD 6 Lug and almost all clones from China Versions with diamters of 23.00, 41.50 and 46.00 mm are available Printed in PLA with 15% infill
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printables
RC4WD Gelande II Chassis Parts + D90 & Cruiser Body Parts
General Description Most parts marked L and R for left and right. LR parts fit or must fit both sides. However, some parts need to be mirrored in the slicer. Almost all holes are designed for M3 screws. Sometimes nuts are needed, but…
P
Printables
RC4GS extended steering handle
The original was too short for me to feel confortable, so quickly extended it a bit to better suit my hand. Category: R/C Vehicles
P
Printables
RC4GS/RC6GS battery door + gopro mount
RC4GS/RC6GS battery door with GoPro style camera mount. 28-6-2020 : added battery door without mount 18-02-2024 : changed the file for the blank door, it was the wrong one and it didn't fit. Category: R/C Vehicles
P
Printables
Boitier MARC438R
Ce boîtier a été conçu pour répondre aux contraintes thermomécaniques spécifiques des environnements d'électroménager. Il assure le maintien rigide de la carte électronique (PCB) tout en garantissant une isolation galvanique et une…
P
Printables
SVG for Prusa Pro RC4 Face Shield Visor
I was unable to open the DXF for the Prusa Pro Face Shield in Adobe Illustrator or Inkscape, so I used Rhino to produce an SVG file in case others are having that issue with polyline conversion. This SVG opens fine and scales correctly in…