Liczymy pasujące modele…
The original model posted by jpacek is very cool. It was broken in slic3r, so I used meshlab to repair it and reduce the faces. I'm not sure how well the tentacle tips will come out on my printer, but I'll give it a go.... for Gunther.…
I was having a weird issue in Cura when slicing the Honeycomb version of the Filament Sample Tray. I imported it into Fusion360 and messed around for a bit stitching the various face groups around the problem area on the model. It seems…
*Print flipped over* Print Speed: 250 mms Print Quality:1.5 mm
The X01 Power armor from here: https://www.thingiverse.com/thing:1284097 Repaired using MeshLab and Microsofts Repair service. Category: Creatures
As many have mentioned there is an issue with the 1storage_core.3mf file. I have just repaired it and posted the repaired file and gcode to help others not fall victim to the failed print I did.
Philovance designed the new tesla cybertruck in low poly! It was really hard to sum up such a piece of art in few faces but I think he managed it :) And I just added some crucial features which has unfortunately been lost in the…
Allows you to connect a Bobo VR M2 headstrap to the Quest 3/3S. I printed it at a 45 degree angle standing up on the bed with tree supports, so there is no major cleanup required.
FelixWurm_933065's original model only included the bottom piece so I extracted the top piece from the Fusion 360 file they included, and added my own insert for the TC66C USB-C power meter from AVHzY
This is a repaired and slightly modified version of "human tooth model" by Svenergy. The model is watertight and a 2 manifold. I've been told by someone with deep knowledge about human teeth that a tooth like this does not usually exist.…
The chancellor is a fairy chess piece that can move like rook and like knight.
This is a remix of https://www.thingiverse.com/thing:6438260 When I opened the GuitarXR.stl and guit.stl files in Cura I got these errors. "Model GuitarXR.stl is not watertight, and may not print properly. Check X-Ray View and repair the…
Remixed HTC Vive desk mount - Simply ran through netfabb to fix STL errors. Looks good now. Category: Games
I am searching for a model to test my Ultimaker S5 dual colour print. Than I found this model an I liked it because the pens on my desktop need a home :-) . By slicing I could see that there is a problem on the bottom layer (u can see it…
The original look good but print bad, so i try to make it better. Print with more details and less support needed. Improvement to the original file : More details Smoother Erase some errors Make the tail and the belly in contact with…
As the description says. Print as oriented from PC, ABS, or PC/ABS blend, GF is a plus.. .2LH or smaller. 6 walls, 30% triangle infill.
I found that the repaired DAS mod still had some errors in it. Took another stab at fixing those errors. Additionally, I cut off the bottom ~1mm to make for a larger build plate surface area so hopefully it prints OK without a brim.…
ORIGINAL : https://www.thingiverse.com/thing:309517 The original model skipped layer on cura 4.0.0. So the model was repaired with 3D Builder (within Windows 10). All the wheels are filled for some reason. :/ 2022-02-07 - rip 3D Builder.
Original cable chain mount sliced poorly. Repaired thru Microsoft Tools3D then isolated the bad piece. Also included a modified extruder mount that leaves some more space for the filament tensioner to be reached. Category: 3D Printer Parts
The original hade some major flaws that Prusaslicer couldn't handle so this version is just repaired.
I wanted to enlarge the model to print it (with my Ender 3V3 KE, 220x220mm bed) and I noticed a problem: the hands weren't perfectly attached to the base, there was a gap. That's why I fixed it with my remix. I also cut out part of the…
My son loves Gravity Falls, so I printed the original model for him. The iris model wasn't loading correctly for me in Cura, so I repaired it.
Please see Sneaks design for all information and instructions. When I loaded the __raspi_bottom__1_05-rp3bp STL file, Prusa Slicer noted 64 errors. When I loaded the __raspi_bottom__1_05-rp3bp-v75 STL file, Prusa Slicer noted 398 errors.…
When I tried to print original panel in BambuStudio with top surface ironing, some of the surfaces were covered with brides. I fixed the model in Fusion360 and it slices perfectly after that.
Improved turret. Original have gap betwen so there is problem with printing.
This remix is a technical refinement of the original toolbox tray, specifically tailored for Snapmaker U1 users. Key Enhancements: Fixed Geometry: Repaired 82 non-manifold edges for error-free slicing. Ultra Material Efficient: Reduced…
Removable skadis basket | REPAIRED note: Unfortunately, the original file (on the left) is missing the pattern on the right side . The repaired version (on the right) has the pattern all over the model now! Original file with one half…
The initial iteration had a missing layer which caused all sorts of output and printing problems. This is fixed
Indiana Jones swapping the idol scene. Print the background and figure separately. Print the background first, adjusting to the size of your needs, then print the figure paying close attention to the size to fit your background. Adjust…
Candyman 3D printable model. Easy to print, just adjust size to your needs and go!
Sweeney Todd: The Demon Barber of Fleet Street - 2007 3D printable model.
The Birds - Rod & Tipi Porch Scene - 1963 3D printable model. This has many different parts and options. There are massive amounts of supports on this one, takes a while to remove them all.
Repaired the "Arm_L.stl", "Body.stl", "ShovelKnight.stl" files as per a request on Reddit. The files were showing error as not being watertight in Cura so repaired them. Category: Sculptures
The original model posted by jpacek is very cool. It was broken in slic3r, so I used meshlab to repair it and reduce the faces. I'm not sure how well the tentacle tips will come out on my printer, but I'll give it a go.... for Gunther.…
Since thingiverse can't seem to get their shit together and actually show the models that we upload under our profiles or in searches, this is the only way to get some models shown. If you want the files for the real model, you can click…
I loved the look of these Mermaid Corbels (I didn't even know what a "corbel" was before I saw these!) uploaded by @darkside501st but when I went to print them, all three threw up errors in Cura, with the left being the worst. The left…
Ok... the original model is a beautiful work of art. There are, however, several issues with it. After no replies from the designer, I took it upon myself to repair the model and modify it for my own needs and to suit my own tastes. NOTE…
When assembling this most excellent model , I found that the front wheel wasn't manifold. Every time Cura sliced it, it would fill in the top as a solid, obscuring the hub. This is a repaired, manifold version of that front wheel. All of…
Everything is the same, but in original file you can see cracks around Raspberry Pi logo. So I repaired them for better aesthetics and easier printing. Enjoy ;) Print List Top (pizero2casebottom) Bottom (pizero2casetop) 2 clips…
This remix contains the repaired original model (that had problems, which can be seen when opening it in OrcaSlicer). This remix contains the repaired original model (that had problems, which can be seen when opening it in OrcaSlicer),…
Gridfinity Scissor Holder (Remix, repaired original model, and rebased with magnet holes on all bins). This remix contains the repaired original model (that had problems, which can be seen when opening it in OrcaSlicer), and it also has…
This is identical to http://www.thingiverse.com/thing:203968 , but with non-manifold faces fixed. It sliced/printed just fine for me on the first try with the "fine" setting in Simplify3D on my MakerGear M2 printer, no need to rotate or…
The bust of Minerva repaired in blender. Fixed random inner hole in pilaster.
Monolith Carriage for XOL/A4T using 9mm belts.
"Rode VideoMic Me Lyre style mount by shiftline" is a mess on simplify 3D "Rode Videomic fixed coldshoe mount" has better looking coldshoe/hotshoe mount so i repaired and fusion them mount on cold shoe/hot shoe mounting Print Settings…
This is the extension part of https://www.thingiverse.com/thing:399744 run through netfabb.com's repair service. It actually slices correctly with Slic3r now. For more information, see the original.
Repaired version of https://www.thingiverse.com/thing:15904 . I couldn't get the original to slice with Slic3r PE, so I repaired it with Netfabb. Print instructions Category: Model Furniture
The model had faces inside which in my slicer came up as empty layers. So I fixed it and resized it by 160% Category: Art
Found this awesome chocobo published by kijai . But it's not so well optimized for printing. Healed the model to one volume. By the way, included variant with supports for ABS (0.12mm layer), that's printed by me. Category: Creatures
The original file had two bodies in model. This did not slice well in S3D so I removed the second body in meshmixer. Print Settings Printer: DIY Rafts: Doesn't Matter Supports: No Category: Replacement Parts
Fixed DJScope's version to make it printable on my FDM. Prints at 3 1/2 inches tall or higher. Supports must be used! My daughter is a huge fan of Technoblade and I fixed this so I could print it for her. I make my fixed verson available…
I repaired the castle. original https://www.thingiverse.com/thing:161975 Category: Buildings & Structures
Repaired in Netfabb Studio basic Dimensions: 0.85" x 0.28" x 1.64" (22mm x 7mm x 42mm) Category: Video Games
REPAIRED correct files loaded scaleable and easy to print
The mesh of the original crater was so broken that Cura outright refused to slice it. I cleaned it up in Blender and reduced the vertices count on the bottom. I also increased the height a little so that the crater bottom does not clip…
I wanted Jarlang's excellent Fiat 626 in 1/100 scale but when I reduced it and printed it the fine detail of the radiator bars collapsed into the space behind them. (Model on left in photo) I used TinkerCad to make a filler piece for the…
Attempted to make the STL printable. I could get it pritable easy enough but it had Super thin walls and I cannot get it sealed so the printer doesn't see the Hollow inside. I thickened the model enough to allow at least 4 walls. It still…
The origanal wouldn't 3d print so I fixed it in blender and now slices properly Category: Replacement Parts
Repaired and improved versions of coal load for Coal Wagon for Wooden Tracks from Michal Franta . The motivation for making this remix was the wrong size of coal load in original Coal Wagon from Michal Franta. This model has right…
Based on the amazing scan “ Cranium with injuries - 260727 ” by Historiska , I took the published 3d model and manually cut out the “filler” geometry at the base of the skull, hollowed the model, and patched up the hole to print easily.…
Repaired meshes if your slicer does not auto repair ( Simplfy 3D)
The STL files are just repaired so that they can be used with Slic3r. I'm using a Digispark instead of an Arduino for controlling the speed, you can find source and instructions at https://github.com/reefab/diybio_centrifuge Category:…
The original RC3 headband STL file had manifold errors that caused problems with the Cura slicer engine. This file is repaired and works with Cura (tested with V4.5). Print instructions Same as original, just repaired the mesh
I had a problem printing it on Simplify3D so I repaired the model. Now you can print it without inner holes and errors. See pictures for details 4 headbands stacked on top of each other Print instructions 0.25 mm layer height 5 top 5…
Same as original except objects are manifold and slice in Slic3r now. Category: 3D Printer Accessories
I've just repaired crydrk's file so that there are no open edges. Praise Helix
I have a broken shower holder with an oval hole for the main support bar. So instead of creating a new support I just create a new part for the actual one. It's a niche project, I still hope that someday it will be useful to someone.
I'm not into it, but I was seeking it for Christmas gifting for a loved one who is into it. Here on Printables, ReProps's model (which this remix seeks to improve upon) was the only one I could find for "Majora's Mask from Legend of…
Make a MakerBot! Replicate with a Replicator! This is the Original MakerBot Replicator CAD file. It is still available for download on Thingiverse HERE , but the files are missing some key components and it will not open properly in…
In the model from parufito was a gap between the center-part and a thread, making it unprintable. Add supports on printbed and it should work out even with 0.3mm height.
'Keeper of the Plains’ statue located on the river near downtown Wichita, KS – as per original model description. Original model created by user “headwindh” on sketchfab, where they set the license as CC - Attribution
how you see from photo, are only about 3mm between rollers, WTF? Im asking myself, to get belts parallel must be 14mm or you get issue when make belts tight and X axis carriage are in position min, moving to max no possible, or if you…
Had some trouble with the original model printing the helmet visor weird since the external visor is so thin and the model has an internal visor preventing infill from getting to the front of the helmet. Corrected it in blender by…
simply repaired the original part because when imported to slic3r for printing, the upper third is completely missing. thx the designer and looking forward for testing in summer :) Print instructions Category: Sport & Outdoors Summary…
This is a simple remix to simplify the model, removing unnecessary sections of plastic around the top where the feet slot to the frame. Additionally, plastic is shaved off of sides of the model, for both style & to further reduce plastic…
Repaired wheel gear (on photo, original is white, printed one is brown) for this toy. Fits the same screw as the original one. It might be printed horizontally to make it more resistant to the rotation strength. Print Settings Printer:…
[Scroll down for English version] Engrenage pour réparation d'une voiture Magic Tracks, au cas où l'engrenage n'est plus pris sur l'axe et se met à tourner autour de l'axe, la voiture n'avance plus. L'engrenage de remplacement est celui…
Exactly like the original model ( https://www.thingiverse.com/thing:2803664 ), but I've repaired it and split into 2 parts (otherwise slicer splitting could fail, etc…)
open slot repaired in Bau-Plättchen_Hälfte_2
Previous version had slicing issues in Simplify3D. This version will slice properly.
Swan, with a small support built in to hold the nose without any extra supports needed
The files as is will not load into BambuSlicer. I used IdeaMaker to repair the files and then imported into BambuSlicer to check. After which I exported all the objects to .3mf and .stl formats to use as you will.
My brother's coolbox handle broke due to overload. I took rough measures and rebuild the broken joint in TinkerCad. Few test objects to check the complete design, then printed the replacement part, mirrored for right and left version.…
I got annoyed the original model by @JamesThePrinter, cool as it may be, isn't manifold so I fixed it.
Remix of DutchDeveloper's ‘The best Bambulab Glass Top Led Raiser mod’ which has two issues: The slot is too close to the inside edge, causing slicer to generate holes in the wall. The slot fitment at 0.20mm is way too loose for my…
Fixed through netfabb as the original file had some internal gaps causing improper infill/support material use. Then added a bar between the handlebars as my first print had the left handlebar break off easily. Then added a small cylinder…
omplete bike repair tools, including bicycle pump and needle for easy to use. The oil filling equipment is used for car, trucks and other maintenanc
Just fixed the holes in the mesh of the thorax
This is the pin I used to fix my window locking handle (Truth brand https://www.truth.com/products/Hinged-Window-Hardware/Locks/24-Series-Locking-Handles ) with 3D printed part. The video about this project is here…
After 30 years the lever of the press broke. I reengineered with TinkerCad and printed. Grand-kids have fun again. Printed on MK4. Happy repairing! If you like my post, explore my other Printables: https://www.printables.com/de/@Tritschi
- preferably nozzle 0.2/0.25 - PLA - NO SUPPORT!!!
@devonjones excellent "OpenForge 2.0 Cut Stone Separate Wall Primary Walls" collection does not include some tiles which I needed myself. So, I created them by modifying some existing tiles. There are also parts in the original collection…
I was having a weird issue in Cura when slicing the Honeycomb version of the Filament Sample Tray. I imported it into Fusion360 and messed around for a bit stitching the various face groups around the problem area on the model. It seems…
![Bamboo Wind Chime [Repaired]](https://media.printables.com/media/prints/662096cb-ac0d-46e5-8f04-7d92e1ae93d0/images/12851582_39f8c295-6811-4c3f-b134-b606748e8041_ea646b9a-b4b8-426a-86ad-7e453e4c8169/1.png)
