Liczymy pasujące modele…
NO, THERE IS NO WAY TO GET A LICENSE TO SELL THE BOX COMMERCIALLY. MY DESIGNS WILL ALWAYS BE FREE FOR NON-COMMERCIAL USE ONLY. PLEASE STOP ASKING! The design is based on the " Tool box parametric " by Yanev and provides some more options…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nice modern dcorative plant pot or planter for your home. Most easy to print in 2 or 3 layered Vase mode setting. Prefered material - PLA filament. Happy printing!
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
UPDATE: 2022/12/14 No changes in this update, just a big thank you to everyone that's downloaded, posted a make, remixed, or re-shared this model! This was only the fourth model I shared and was the first ‘big project’ I took on while…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
V2 : increase of the mecanical play of the axis to avoid that the two parts are welded during printing. Improved closure. Just change the dimension in fusion 360 to resize it.
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Print orientation: flat
Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu
I saw a few models on here for printable SKADIS pegboard and I love the idea. However, many of the models were dimensioned wrong for my printer or intended purpose. I decided to make a simple to edit, parametric file for generating…
Wydruk około 14,37 €–17,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A tiny cute triceratops that uses just 5 grams of filament. Great as a cute decoration, keychain, or little desk dino. Print Settings : Layer height: 0.10 mm Infill: 15% Grid Supports: Yes Support type: organic Fuzzy Skin: Outside walls (…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For IMPERIAL: https://www.printables.com/model/1371922-drill-guide-imperial This metric drill guide is the perfect helper for accurate drilling with bit sizes ranging from 4 mm to 10 mm . The guide is designed as a sturdy bar with clearly…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Inspiration: https://makerworld.com/en/models/815908-over-door-hook-wall-shower-hook-many-thickness#profileId-767349
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed (Print the pipe upside down) Scale it as you like :)
Wydruk około 7,83 €–9,56 € nettoWstępna wycena jednego wariantu
Windmill - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Update: Extra hole for screw mounting ( d = 3 mm )
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
All forbidden bricks !!! Comment wich other types you want to see !!! Make shure to use qualitative filament All step files are included in case of tollerance issues (adjust per 0.1 mm)
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
This is a marking-gauge for woodworking purposes to mark the same measurements against different edges. I found some existing marking-gauges around but wasn't able to adapt them to my ruler measurements. So I decided to make my own in…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
4 Variations. Customize to your liking using the STEP file. suggestions are also possible :)
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
This is a fun model to print because it's quick (49 min), and multi-color makes it look 10 times more awesome! Change your filament color/ material at layers 26 and 30 to achieve this look. Make sure you turn supports ON, or else your…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Příchytka na čalounění - dočasně trvalé řešení zlomené příchytky. Tisknuto z PET-G a drží (z PLA praskla). Temporary (forever) solution. I printed it from PET-G and works fine (or ABS/ASA should be OK, from PLA it cracks - too fragile…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
All forbidden bricks !!! Comment wich other types you want to see !!! Don't forget to check illegal bricks 1.0 !!! Make shure to use qualitative filament All step files are included in case of tollerance issues (adjust per 0.1 mm)
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Windmill XL - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction Inspired by "Cable Corners... keep cables in corners!" by muzz64 on Thingiverse Fusion 360 parametric design This is for bend-sensitive cables, such as Cat 6 and Cat 6A. In the case of these cables, the curvature of the bend…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
A modern approach to the wavy style plant pots with the use of parametric settings. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Wydruk około 3,72 €–4,55 € nettoWstępna wycena jednego wariantu
This is an insert for the Cricut Maker tray that helps you organize your tools.
Wydruk około 6,23 €–7,61 € nettoWstępna wycena jednego wariantu
All forbidden bricks !!! Comment wich other types you want to see !!! Make shure to use qualitative filament All step files are included in case of tollerance issues (adjust per 0.1 mm)
Wydruk około 0,23 €–0,29 € nettoWstępna wycena jednego wariantu
A standard and dual screwgate locking carabiner, using a print-in-place pivot mechanism, and available in multiple sizes . The STLs for three different sizes of each style are included here for convenient printing. This model is fully…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
Easy to print, Perfect for your DIY projects
Wydruk około 4,78 €–5,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a great design by Sneaks at https://www.prusaprinters.org/prints/3408-quickly-measure-sort-m2-m3-m4-m5-metric-screws-up- but also to cmh at https://www.thingiverse.com/thing:4154091 for sanitising this for me (version with no…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Had to print using 2mm raft to stick on build plate. Print with thicker side of the model upward shown in photo, no supports needed. May require some strands to be cleaned up when done printing. You can find adapters on Amazon but why not…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
This is my take on printed anchors. I designed them for use with XPS foam from which I made an enclosure for my 3D printer. In combination with wood screws an washers they can be used to hold together foam boards or mount things like…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I couldn't find a vertical clamshell stand that meets my requirements, so I made my own. Fits the 14-inch and 16-inch M1 Pro/M1 Max MacBook Pro (2021 model), and is designed to be used with adhesive non-slip rubber feet. Beta version…
Wydruk około 4,50 €–5,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Remix-Ready I added a BLANK version for you to add your own language/font. ------- For this look start with White then switch to Black, then Red last. Quick Guide to changing…
Wydruk około 3,52 €–4,31 € nettoWstępna wycena jednego wariantu
Some not required material (in my opinion) was removed to decrease printing costs and duration further. Main features: Two magnets for each segment with press fit (6x2mm). Minimized material costs, the gridfinity boxes are fixed only by…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
A puzzle box in the shape of a brick block. Printing All parts can be printed without supports, however Level 4 includes some long bridging that must not droop for good functionality. This project includes a version of this object with…
Wydruk około 5,03 €–6,14 € nettoWstępna wycena jednego wariantu
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
Wydruk około 5,17 €–6,32 € nettoWstępna wycena jednego wariantu
A moder take on the tradicional star plant pot - will fit your plants and interior beautifuly! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a stroneger print)…
Wydruk około 1,12 €–1,36 € nettoWstępna wycena jednego wariantu
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Sharpie fine point pens. Print upright with thin part of the adapter touching the build plate. No…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Lady Beatrice Squintsworth Glasses Holder. It works well with any glasses or sunglasses. Looks great on a desk or night stand. Recommended print settings layer height: 0.2 mm infill: 10% gyroid perimeters: 3 supports: no…
Wydruk około 6,74 €–8,24 € nettoWstępna wycena jednego wariantu
An easy to print geometrical design of a cute and cozy Christmas tree. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu
I wanted to try my hand at generating an oloid using OpenSCAD that is easy to print. So after generating it, I split it into two parts that can be perfectly aligned for gluing using two pins that are made from small pieces of 1.75mm…
Wydruk około 1,04 €–1,28 € nettoWstępna wycena jednego wariantu
Details: Available for glass panes with the thickness of 6mm, 8mm, 10mm, 1/4", 3/8" and 1/2". All models available as STL and STEP file. All models have a 0.1mm extra tolerance in the thickness. Print flat for maximum strength. No…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Windwheel - 100% printable - no support - no bearings - low friction - video Complete printable windwheel which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Diameter 176 mm…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Check out QR Code Stand → here ← Dimensions: Scan This to Try Out --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
It was printed with 0.6mm nozzle but smaller the better. I recommend using PETG, but it works with any prusament just fine. :D *updated: V2 version added
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
If you find this file valuable a $1 Venmo donation would be awesome! Thank you! Designed to work with two 1.5-inch drywall or wood screws. Run the screws in and out of the clips a few times to reduce friction. Don't overtighten or use a…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a parametric planter with a vented, self-watering reservoir and water level indicator. I designed this in Fusion 360 and have included STLs for a 4", cylindrical version with interchangeable smooth, fluted, and knurled variants in…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Don't forget to hit the like button if this helps you :) A filament guide for the Ender 3 S1 gantry top rail, remixed to enlarge the hole through the eye of the swivel to be larger so its supports some PTFE tubing. OD 4mm is a nice snug…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Update 2025-06-01 : Added STL files for a spool column to allow spool stacking. They're sized to allow for a wide variance in spool widths and hub diameters. I've got a bunch of filament spools sitting around, and wanted to turn them into…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Stabilo 0.4mm fine pens. Print upright with thin part of the adapter touching the build plate. No…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple and easy to print vase mode pot and planter for your plants. Best to print using dubble layered vase mode settings, using any filament you want. Happy printing :D
Wydruk około 1,59 €–1,95 € nettoWstępna wycena jednego wariantu
How to print: Use inner and outer brim !!! If your printer has issues with overhang, make shure to ad support force as shown in the picture. Make shure to use qualitative filament.
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
Easy to get on the ring but won't fall off! Gcode prints one-at-a-time for less stringing!
Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu
This is a parametric door threshold ramp to help robot vacuum cleaners to get over door lips. If your printer can produce good bridges then I recommend printing it in the finished orientation to create a surface for the wheels of the…
Wydruk około 3,12 €–3,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
NEW RELEASE !!! All angles included 15° 30° 45° 60° 75 90° Step files are added in case of tollerance issues Leave a comment if you want/need adjustments
Wydruk około 3,95 €–4,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Had the issue that in our family, all have an electric toothbrush. They were standing next to the sink and always fell over. So I created this stylish toothbrush holder for the 4 of us (there are 2 bigger holes for the parents toothbrush…
Wydruk około 8,09 €–9,88 € nettoWstępna wycena jednego wariantu
A new parametric model inspired by the structure of big rock formations. Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
For all LEGO lovers as I am Print instructions Print with support
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This is your basic speed square with metric markings on both sides. A speed square is essential for most wood working projects. It is also very useful for a lot of other projects. If your printer is properly calibrated the square will…
Wydruk około 6,57 €–8,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is just a very simple sliding lid box that can be used to store things like game bits and keep them safe. The F3D file includes adjustable parameters for Height, Width, Length, Thickness and Clearance . If you would like a different…
Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu
UPD v23: Fixed wall thinkness issue on top cover UPD v25: Fixed fillet fails to calculate for small “holes"; Fixed top/bot X axis pattern for large boxes (>50mm width) UPD v26: Fixed side wall holes number and offset calculation, now…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
Windmill Toroidal - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 137 mm…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Das ist ein Halter für die Matten von meinem Plotter. In der Mitte befindet sich ein Loch um es mit einer Schraube zu befestigen. Ich habe das PLA+ mit 205 Grad und 65 Grad gedruckt. Die Ecken sind abgerundet und passen sich super an.
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Electrical Grid Series - Power Station Power is no small commodity in the war for freedom across the bloody wastelands of the home worlds. This is the Electrical Power Station. Guaranteed to generate all of the electrical power your…
Wydruk około 17,55 €–21,45 € nettoWstępna wycena jednego wariantu
All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
Metric thread gauge Are you tired of guessing which metric thread size your screws are? Say goodbye to the frustration of mismatched fittings with our Metric Thread Gauge! Designed for ease of use, our gauge is your go-to tool for…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Turbine, Lüfterrad oder Propeller konstruiert mit Fusion360. Alle Merkmale können in Fusion360 über das Menü “Ändern > Parameter ändern” angepasst werden.
Wydruk około 1,49 €–1,82 € nettoWstępna wycena jednego wariantu
Updated 2023-12-07 (see below) There are several designs for bearings (roller, ball and sliding) designs already in the internet. Some are customisable. I did not find one that I could tune to be accurately sizeable and printable.…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Info: remodelled and made a great model from @Meistel Edel (thx!) parametric , so any size can be easily created any width/height any number of holes the plate is 3.2mm thick Variations: exported few most common variations for convenient…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
There are already some knurled knobs for hexagon nuts, but no design is parametric and offers you sizes from M2 to M56! The model uses the dimensions according to DIN 934 (see the attached data sheet). A tolerance of 0.5 mm is set for the…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Magnetized dust collection couplings are not my original idea, but I was tired of searching for a model that fit the many unusually sized dust-ports in my shop, so I made this one parametric. Assembly involves gluing your magnets into the…
Wydruk około 12,98 €–15,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Important! Rules and regulations regarding electrical installations and devices vary significantly between countries, please make sure that you comply with any local regulations that may be relevant. The design is intended for use with a…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena jednego wariantu
A replacement for a common type of ball-shaped, spring-loaded stopper, for tightening drawstrings on clothes, bags, etc. You'll need: 1x print included “Body” model 1x print included “Plunger” model 1x spring +-11mm long, +-7.5mm outer…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Starting from the excellent existing model of drilling bounding ring I designed my own using parametric features from Fusion 360 and added nice features like printed diameter size I tested it from 4mm to 12mm drill bits (The range I…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Magic Coin Disappearing Trick for 1 euro cent Print files coin1+coin3 then print file coin2 with pause and insert coin3 inside. Total time: 40min+30min - 0.3 Layer Fusion360 file added
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here are the files for my Trick puzzle This only has one way to go together (its really not that hard) and if you pick it up by holding 2 pieces its fine......But it you pick it up by holding just one part it will fall apart immediately.…
Wydruk około 2,69 €–3,29 € nettoWstępna wycena jednego wariantu
(This mechanism is used in the following designs: https://www.printables.com/model/658410-folding-pocket-phone-stand ) /**** Update: I've found that a square shaft works better. You can use an 8mm diagonal square shaft, and print it…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
Windmill XL Cross- 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Parametric SD Card Holder Clean and effective design. Minor remix to give it rounded corners and to make it (more) customizer-compatible. Remix of this original design: Parametric SD Card Holder by PAmes
Wydruk około 3,72 €–4,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cricut Pen holder for Sharpie. Extra fine has been tested, Fine is still under development. It should be adaptable for most pens. Check out the spreadsheet in the Freecad source. Print .2mm layer height, no supports. Flip it so that the…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
A simple yet very decorative design flowerpot inspired by the structure of multiple intersecting crystals. Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
To edit the text in PrusaSlicer (you must be in Expert Mode ): Switch to 3D editor view Right click on the text to be changed. Select “Edit text”. Edit the text. Slice! For multi-color, add tool changes or filament changes at the desired…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
This is a method to improve the layer adhesion of 3D prints. Made with Simplify3D version 5.
Wydruk około 3,27 €–4,00 € nettoWstępna wycena jednego wariantu
Sacred Geometry Lotus Motif: Geometric Wall Art Anahata - 8 Petals - Heart Chakra.
Wydruk około 7,99 €–9,76 € nettoWstępna wycena jednego wariantu
Customizable Parameters: Tooth Profile (GT2, HTD 3M, HTD 5M) Tooth Count Tooth Width (Belt Width) Bore Size Snap-Ring Size Grub Screw Size What you need to know: Printed in two parts. A metric snap ring/retaining ring (DIN 471) is…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended print settings: Material: PETG Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled. As seen on Jelle Romers video: And article:…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
About I have a one socket and a plug that is super hard to remove, so I created a handle to make it easier to remove the plug from the socket. Should be compatible with standard angled plugs used in computer electronics, home appliances…
Wydruk około 0,63 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I described this as"scalable" rather than “parametric” - the clear opening dimension of the model is 25.5mm x 4.4mm and it's a very easy calculation to measure the size of your chisel and scale the relevant dimension in PrusaSlicer. Link…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
After printing, heat the arms with a heat gun or a hair dryer and bend them to fit your head. Two Part Version The initial design (the one part one) did hold up for a month or two, but it did brake after some time at the mounting point to…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
We purchased a secondhand Hi Ho! Cherry-O game... and the spinner was missing! This is the first model I have ever created– I used Fusion 360 and PrusaSlicer. Parts can be superglued together or pressure-fit– I recommend first gluing the…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Noisy Cricket From Men in Black.
Wydruk około 4,94 €–6,04 € nettoWstępna wycena jednego wariantu
Cricut maker 3 pen holders for: Sharpie fine point Sharpie ultra fine point IKEA MÅLA pen + Blank holders allow you to create your own custom pen holders. Added dummy cutting tool blank to avoid annoying rattle when cutting tool holder is…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Lukisegler 2.0 an RC electric glider with brushless drive Attention! Since this is a large project with many files, I will add more instructions here in the near future! Instructions for the fuselage are included in PDF format. The first…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to make my own print-in-place 608 ball bearing for my Ikea Samla Drybox so that all the necessary parts can be printed down to the IkeaBox. I modeled it in Fusion360 and so I can offer it to you as an .f3d file so you can easily…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
This is a divider for the Ford Maverick rear under-seat compartment, it utilizes the Ford FITS integrated mounts. The design is comprised of two main parts, the divider and the FITS brackets. The brackets bolt on to the divider using…
Wydruk około 1,09 €–1,34 € nettoWstępna wycena jednego wariantu
These are tokens for the Marvel Champions LCG to be printed with three different colors. In contrast to the original tokens, these tokens have two different numbers on the front and back side. This makes counting damage up by one slightly…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
