Liczymy pasujące modele…
Here is Kiriko Kunai from overwatch 2. I have split the knife into 2 parts and added 2 2mm holes for alignment. For stuff like this I like to use 2 pieces of filament. Im not sure the true scale of her kunai, but they normally range from…
🐔 Kakariko Village 🏡 Inspired by The Legend of Zelda: Ocarina of Time , MiniWorld 3D celebrated the 20th Anniversary of The Legend of Zelda: Ocarina of Time with this multicolor model of Kakariko Village, featuring a rotating windmill and…
The Headpiece is a straightforward print. I hope u have fun with it!
This is Kiriko's kunai 3d model ripped from the game files, retopo'd and optimized for 3D printing. I have also added the small details that are part of the normal map and not the actual geometry of the ingame model for extra…
A dust chute and PVC clips designed to get as much airflow as possible within the space allowed under the table of a Rikon 10-324TG band saw. Very likely also compatible with the 10-324 and 10-326. Hardware required for a full…
Inspired by The Legend of Zelda: Ocarina of Time MiniWorld3D celebrated Halloween of 2018 with this model of the Graveyard in Kakariko Village full of stunning details, from the tombstone inscriptions to the entrance to the Shadow Temple!…
A Zero Clearance Insert for the Bandsaw. Model Rikon 10-3061 10" Bandsaw with better dust collection. I included the f3D to be able to change the size to fit your own bandsaw. Edit 3/31/24: Added 2 files for 6mm longer cut length in the…
I have lost or broken several of the Fabrikor keys and am down to a single key for all the cabinets in my home. This is a printed replacement since all Fabrikor cabinets (including different sizes) use the same one. Please use caution and…
Over time, band saw throat plates get damaged or destroyed. This occurs when making tight turns and the saw blade eats away at the throat plate. This file allows you to print a replacement anytime you need or you can print several and…
Už mě štvalo vylévání vody do ostřikovačů všude po motorovém prostoru.
Logos for Powermatic, Proto, Rikon and SawStop. Let me know if you're looking for a particular logo and I'll try and get it for you.
This is an adapter for dust collection of the Rikon 10" bandsaw. It may work for others as well. The stock dust extraction leaves a lot to be desired. The guide bearings under the cast iron top got jammed with dust. I decided to collect…
Voici ma version du Kokiriko , inspiré d'un modèle original. Le kokiriko est un instrument de percussion idiophone traditionnel du Japon. Il s'agit de petites lames reliées par une corde, avec deux poignées aux extrémités. En agitant…
I made these end caps for the fence rail of a Rikon 14" bandsaw so it will hurt less when I keep bumping into the rail. For now it's made from PLA as it doesn't need the extra strength of PETG. After I bump into it a few times I may…
When slicing - I highly recommend that you print the top half of the ponytail at 50% speed so it doesn't sag/plop down. You can do that by adding custom g-code at that layer " M220 S50 " (S50 meaning 50% speed). This setting is put in the…
Dekoratives Wandbild für Fußballfans mit der Nummer "25" und dem Namen "Milan".
My kids like the new Anime "Made in Abyss," so I felt the need to make the young heroine from the show "Riko". I have been asked to include the Sugar Cookie Recipe I use, so a copy will be included with the STL files when you download…
Visačka na lahve s pracími prostředky pro manželku. Chtěla abych vytvořil nějaké štítky anebo popisky a vzniklo tohle.
Trychtýř nádoby ostrikovačů pro škoda octavia 3 generace
Disc air intake cover for a common form factor of cast iron combination belt/disc sanders with a 6-inch disc. My model is an older Ryobi BD4601, but if you have a similar model, and the under-table intake looks the same as the last photo,…
I loved the film “Kirikou and the Sorceress” when I was a kid and the fetishes always fascinated me so I tried to recreate this one for 3dprinting. The film was made at the time where films were made to be good and not for DEI bullshit,…
Simon Petrikov glasses Print two temples and a single frame, no supports needed . You may have some troubles printing the joint of the temples, but from 4 I printed out, only 1 turned out wrong. After printing, just snap them in place…
I present to you: the filter adapter for Zeiss Ikon SuperIkonta 530/2 bellow cameras. I wanted to fit my cokin A filter system onto my medium format SuperIkonta to make some sweet infrared shots so I designed this adapter. It fits this…
The measured diameter of the bar is 25mm. It pressed on for me and was not loose. Could fit any bar that diameter. The fence cap is for a 4mm x 4mm “L” shape. Print screw at 100% infill.
Audi a8 d3 krytka ostřikovače
Polarizer ring for photogrammetry. Plexiglass used was 3mm and the magnets were 5x2 mm. Video of assembly avaliable at https://www.youtube.com/watch?v=c8eMhpucD88&ab_channel=TheDirtyBassett Category: Camera
Rikon Model 10-3061 Bandsaw Replacement Fence Hanging Panel, Rikon original part P10-306-62 continues to be out of stock. I improved on their design a bit, appears to be a bit stronger. Printed on MK4 with Prusament Galaxy Black PETG…
I am getting into Gridfinity and custom bins, and made this for my kitchen drawer. It easily holds 3 peelers, maybe 4. Also added is the silhouette if you need that to do your own thing. I scanned the peeler on a flatbed scanner, moved…
Hier eine Lightbox eines Trikots des Spieler Terodde mit der Nr. 9 von Schalke 04.
EINTRACHT FRANKFURT Category: Signs & Logos
Not much else to say. I didn't like the factory throat plate on my 10-326 so I designed a new one. This fits snug so it won't rattle out or spin when in use. FreeCAD file attached so you can tweak it for your saw as needed.
The brackets have holes for 6-7 (in each hole) of these 12mm x 3mm magnets . It will take about 48 or so magnets. The two stacks on the side that are close to one another you will want to alter the polarity so they don't oppose one…
Need some Latin vibes in your body? Wait no more! Print you own Latin Kokoriko and feel the rythm! There are 27 Parts to print. 2 Grips and 25 percussion panels. Use the provided and corrent oriented plate STL to have them printed ideal.…
I am obsessed with paper tigers. So I decided to try to engineer some for printing. So that everyone can have fun. To make it even more interesting, I decided to make it mix and match. The base will always have the same dimensions so that…
With some blades I have trouble getting the last 1/2 turn to the proper tension with the stock small knob. So I designed this star knob. Since it provides so much leverage, I left it flush with the saw. That saved filament. Printed with…
This lets me connect my Fein Turbo shop vacuum to a small Rikon belt/drum sander. I included the OpenSCAD file for use in other designs. Printed in green PLA with 0.2mm layers.
CAMLOCK adapter for Rikon 8" benchtop jointer
this is a replacement part of the Kuhn Rikon Pepper Mill
Is the handle of your Kuhn Rikon salad spinner broken ? No problem ! Print these parts and easily replace it to give your favorite spinner a second life. Instructions : Print the model with at least 2 perimeters. The centering knob must…
Made this for a Rikon 14” bandsaw (Model 10-326). It is easy to hand tighten the thumb knobs on the spring-loaded tool-less bearing guide system but often they lock on too tight to remove by hand. This small wrench fits over top of the…
Goal was to make a magnetic sheath for a 10cm “colori” paring knife from Kuhn-Rikon . We lost the original sheath, and we were carrying the knife with a cork jammed on the tip so it wouldn't poke holes in the picnic bag. The design uses…
While I love my original model I always felt it could benefit from a moving head, which is the case with this upgrade. Printing Information: There are 4 pieces that need to be printed individually: the body, the neck, the base and the…
Bandsaw blade alignment involves adjusting the blade so that the deepest part of the blade gullet is centered on the crown of the tire. This tool simplifies the adjustment by making it easy to see when the gullet is centered. This tool…
Needed a spacer for my new CBN wheel to work on my Rikon slow speed grinder. its very simple but maybe it could save you 10 minutes of modeling time. I printed with 5 top/bottom layers and 25% gyroid.
This is to replace a switch plate on a Rikon Model 60-200: 2 HP Dust Collector . I never touch the switch because I use a remote . But that didn't stop the switch from failing (I cannot mechanically switch it off), which led me to unscrew…
Kuhn Rikon pepper mill has a ceramic grinder which is connected to the turning shaft by a plastic holder. While it's an excellent pepper mill, the original plastic grinder holder cracked in several places causing the ceramic grinder to no…
I am obsessed with paper tigers. So I decided to try to engineer some for printing. So that everyone can have fun. To make it even more interesting, I decided to make it mix and match. The base will always have the same dimensions so that…
I am obsessed with paper tigers. So I decided to try to engineer some for printing. So that everyone can have fun. To make it even more interesting, I decided to make it mix and match. The base will always have the same dimensions so that…
Disc air intake cover for a common form factor of cast iron combination belt/disc sanders with a 6-inch disc. My model is an older Ryobi BD4601, but if you have a similar model, and the under-table intake looks the same as the last photo,…
Needed a spacer for my new CBN wheel to work on my Rikon slow speed grinder. its very simple but maybe it could save you 10 minutes of modeling time. I printed with 5 top/bottom layers and 25% gyroid.
That's a little toy from my childhood that I was wonder, could I make it myself.. and guess, what?... I did it., What u need: 7 colors of PLA filament (PETG, if u got dey not stringing would work too.. maybe), base filament (that black…
A basic 3d-printable model of the throwing knives used by Kiriko from Overwatch
A basic 3d-model of the headgear/headband worn by Kiriko from the videogame Overwatch 2 designed for 3d-printing
A cover for the Kuhn Rikon ICED santoku knife. The blade is held in place with a spring loaded lever. Use your thumb to release the blade. With your slicer you can emboss your name or a label to the side of the cover.
Conduits snap into place and clear around all panel tabs and the fan mount. For the fan mount you will need to trim two of the original metal shelf brackets down to slot into the cutouts on the backside of the fan mount model allowing it…
That's a little toy from my childhood that I was wonder, could I make it myself.. and guess, what?... I did it., What u need: 7 colors of PLA filament (PETG, if u got dey not stringing would work too.. maybe), base filament (that black…
I am obsessed with paper tigers. So I decided to try to engineer some for printing. So that everyone can have fun. To make it even more interesting, I decided to make it mix and match. The base will always have the same dimensions so that…
I am obsessed with paper tigers. So I decided to try to engineer some for printing. So that everyone can have fun. To make it even more interesting, I decided to make it mix and match. The base will always have the same dimensions so that…
I am obsessed with paper tigers. So I decided to try to engineer some for printing. So that everyone can have fun. To make it even more interesting, I decided to make it mix and match. The base will always have the same dimensions so that…
Welcome to Terra de Verdant: Your Gateway to 3D Printing Success Join Terra De Verdant for just $9 and dive into our extensive STL collection, which powered our personal Etsy shop to $100,000 in revenue. With this membership, you gain…
These are small containers used for storing and dispensing giriko and fudeko (basically powders used to improve grip) in kyudo, Japanese archery. Once they have been filled, just turn the lid so that the small hole on the lid lines up…
Needed a camera rig for my flash as is a bit hard to hold, fits a Nikon remote trigger but for other cameras print a mirror of the other handle or adapt to your needs. Will need 2 m4 threaded inserts for the bottom and i used m4 x 16mm…
