Liczymy pasujące modele…
UPDATE (Nov 2025): Based on user feedback, the tight tolerance cards and parts have been tweaked to add more clearance between parts for easier assembly. UPDATE: Trying to simplify a little bit, so the version of each file with slightly…
A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…
This large ornament or tabletop decoration (~5" diameter) uses a standard tealight LED candle (38mm diameter) to light it from within. If you have a tealight of a different size, I would scale the model to adjust to it's diameter. Print…
See my original model . Most of the voronoi deer models were too big to my Kodama Trinus small print bed (120mm). Downscaling them made too thin walls, so I had to take a solid model, downscale and voronize it myself. Should be fine…
Copyright Notice ⚠ WARNING This design is an original work by the creator and is protected under the Creative Commons 4.0 International License. Unauthorized reposting, claiming authorship, or distributing this model or its images—whether…
More tags you can find here: https://www.printables.com/model/1079716-christmas-tags-christmas-ornaments-20 https://www.printables.com/model/1080601-christmas-angels-christmas-tags-christmas-ornament
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
christmas ornaments three designs for christmas ornament spheres dimensions in mm: ~ 76mm diameter there will be some small overhangs in the top of the sphere, which don't really impact and are not visible as they are on the inside,…
Snowflake Star Wars X-Wing Kit Card This is the perfect companion for the Snowflake TIE Fighter Snowflake Themed Star Wars X Wing Kit Card can be used as a Christmas Tree ornament or as a last minute present. This Kit Card is based on the…
If you like these maybe you also like my Stringart Stars or the bigger Stringart Flower
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Dont forget to post your makes! I use the following settings to print this model with a hole for hanging: Orientation: Top Brim: 5mm Mode: Vase Bottom layers: Enough to get two layers into the spiral, about 40 for 0.3mm or 60 for 0.2mm…
Christmas ornament with articulated legs. Print without support and 0% infill! Let the build plate cool down and don't warp the warm build plate to get the part of as the hands can break of the model.
Bullet journal template Bullet journaling is a customisable organisation system that combines a planner, diary, and to-do list in a single notebook to enhance productivity and track personal goals. I've created this template to speed up…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Customizable Christmas Ornament - Name Ornament - Snowflake Ornament This is a customizer for Christmas ornaments which allows for any text in any font. There is a choice of six different snowflakes which can be placed in four set…
Christmas ornament or holiday fidget toy. There is a hole in the top to feed a string or ornament hook to hang from your tree just download the "snappable" version. In this version the two pieces snap together so it can hang from a…
This is a collection of simple to print 3D Christmas ornaments , including snowflakes, stars, bells, trees and many more. The set contains over 15 original designs created by me in Blender to ensure clean proportions, sharp details and…
Use Calibration Bro to calibrate your printers X & Y E-steps, and Skew. Its a free alternative to the Califlower and/or Calilantern. Print Calibration Bro. Wait for it to cool down! Don't compromise the shape by removing it while hot &…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.28mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
change the color of the filament at 5 mm to accentuate the inlay. check out my other christmas designs: SNOWFLAKE ORNAMENTS MERRY CHRISTMAS FRÖHLICHE WEIHNACHTEN COLLECTION GNOME ORNAMENTS 2 GNOME DEER
All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…
Celebrate the season with these intricately designed bell-shaped ornaments, featuring five variants of open geometric patterns in spiral, lattice, and linear styles. Each bell is optimized for 3D printing and maximum visual impact.…
6 minute print. quick and useful little tool for removing the 4mm ext dia PTFE tubing from my FlashForge AD5X printer. Tested it and its works great for me!
This classic holiday 3D model can be used as a large ornament for your Christmas tree or as a tabletop decoration. The charming glowing Christmas tree in the town square is surrounded by shops. This updated design prints better and has an…
2024-10-10 - Improvements to the web-based worksheet, including an improved measurement map, and Plot.ly graphics to help visualize your results. Check out the wiki on Github ! This companion to the spreadsheet calculator and browser…
Addition Heads for use with dummy 13.
Simple and stylish way to add charm to your Christmas tree. This festive set includes four beautiful shapes: a Christmas tree 🎄, a star ⭐, and two snowflakes ❄. Each ornament prints completely flat as three simple pieces that you slide…
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
ornaments • xmas 2025 four new modern and minimalist bauble designs for this years xmas season dimensions in mm: ~ 76mm diameter important · make sure that: your filament is dry and calibrated so that it deals appropriately with printing…
18 Snowflakes with approx. 50 x 50 x 2 mm for Christmas decoration. Put your favorite snow flakes on your window, gifts or decorate your Christmas table. 09.12.2025: Added two more snowflakes See also my original snowflake collection with…
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Just a rudimentary, stylized snowflake made to resemble a circuit board for the technology-minded among us to integrate into our winter holiday. Designed to be hung from a tree, with the option to hang it from any of the six points to…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
Nested hearts print in place with no supports for a rotating fidget toy or hanging decoration. Choose with or without a loop for hanging. You can also pop the hearts out and replace them with different colors, by squeezing the outer heart…
Not to be Sold I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Simple Christmas Ornament. I printed a simple letter and hung it…
Another variety of Christmas tags
Check out other Christmas models:
I'm collecting old baroque picture frames for some years now to publish my photos in them (and to distract the viewers eye away from the amateurish photos to all the ornaments and shiny stuff). Now as I'm in posession of a 3d-printer (or…
UPDATE: Due to popular request, the Kit Card was updated in regards of tolerance (fit) and stability. For optimal fit I would recommend using a layer height of 0.2 mm. Christmas ornament version of the loved snitch card. Merry christmas!…
This little Christmas ornament is perfect for your window or your christmas tree. It's easy and fast to print. Feel free to share your experiences with the community. Design by protechnordic, found on Thingiverse here:…
To celebrate my 2nd Holiday season on Printables, I decided to add an additional 6 ornament designs to my collection of Vase Mode Christmas Tree Ornaments. I posted the original 6 last year, and they quickly became my most popular…
harry potter tags for Christmas, Pendants or keychains
Celebrate winter with this detailed snowflake collection designed for both display and decorating. The set includes a large wall version, a small wall version, and a dedicated ornament version with a built in ring for hanging. The wall…
This 80mm christmas tree ornament sphere has a very nice shape and is easy to print. I recommend to use metallic filament for an even better look as mentioned on the pictures. Available in TWO versions with SLIM & MEDIUM fins. The cap is…
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 *** New case for Raspberry Pi Touch Display 2 *** Updates Alternative top case part with additional slot for camera ribbon cable, see subfolder "case top v2". Features Internal fan…
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
I added a mount to hang it pointing down. I also resized the spiral to make it more sleek. I think it looks better this way and it is easier to print too. Looks best in silk or transparent filament. Ornament_thin_mount_v2.stl has a wider…
🎄⭐ Print as is, no supports and layer-height .15mm (the lower, the better, as it results in more stable overhangs. More than .3mm and model will not slice correctly), 100% infill. Also you might need to slow down your speed as this model…
Folding Christmas decorations inspired by paper cutouts from school years. Used PLA and PLA+ filaments. Printed on Original Prusa MINI+ with standard PLA preset without any problems. Manual filament change required after the second layer…
I was asked to design a Christmas ornament candy dish. This is what I came up with. It came out way better than I ever thought it would have. It prints very well even without supports! I am even filling them with candy canes and other…
Print Instructions & Recommendations: No support or any other post processing is needed. Models can be printed with 1 or 2 Walls and 0% Infill . It is recommended to use 2 Walls for stability and quality aspects. Unless you are printing…
The Panavia Tornado saw service in the RAF from 1979 right through to 2019 before it was totally phased out to make way for the Eurofighter Typhoon I grew up seeing this aircraft flying overhead in pairs and low through the Scottish…
This was someone else design from 2018 ish but they removed it. I couldn't find it online so I found the file on my computer and posted it for others to use. Here is a link to a stand for it as well that someone else designed.…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as a single color or multi color print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma…
This model will need support for the tail. And may need some build plate adhesion, because only a small area of the body and legs are touching. Made two versions, one is an ornament version and the other a non-ornament version.
There are several ways to make Ornaments + Hueforges, the easiest way was to just add a hole in Bambu studio, so I decided to bring an ornament designed from Fusion 360, and combine both. This model was not generated using AI,the photos…
This is a CAD blank for the internal profile of the Compact Milwaukee Packout Organizer. I have supplied both the original fusion file and a .step file. Feel free to use it as a way to satisfy your endless urge to organize as as a kind of…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
Harry Potter ornament - great gift Stands about 18cm high Easy to print, no supports
A screw together lantern bauble that will hold an led tealight. Can be hung on your Christmas tree or on my Display tree attached. Prints without supports
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
ATTENTION! THESE PIECES ARE ONLY TO BE USED BY THOSE EXPERIENCING DIFFICULTIES FITTING CERTAIN PIECES TOGETHER FROM MY ORIGINAL MASTER SWORD DESIGN! Hopefully not many of you will need these pieces, but more than a few people who have…
About Not a Key-Bak® (alternative) mount for Stealth Press 1 / 1S Made to be a less expensive retractable device alternative for Stealth Press , this is, definitely, not a Key-Bak®, but it sure works like one. Stealth Press is a highly…
The picture frame can be scaled easily, but remember to scale everything evenly. The backboard can be adjusted if you want to add a 20x20 piece of glass or acrylic glass. Supports needed. Make sure to disable support for the plug holes. I…
Just a simple 2023 snowflake ornament. Enjoy!
✨ Merry Christmas Ball Ornament Bring festive charm to your holiday décor with this elegant flat “Merry Christmas” ornament! Designed for easy 3D printing and quick customization, this minimalist yet eye-catching decoration is perfect for…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Support me on Patreon Follow me on Category: Other
Don't lose your head this holiday season. 💀 These print great without supports! More presents in store ;) ______________________ 19 days 'til Christmas!
Quick to print and optimised for 0,4mm nozzle much needed tree hooks every Christmas… Enjoy!!
This is Tornador vacuum cleaner connection to suck up the dirt thrown up directly. The front neck is 12.5 degrees slanted and rotatable. V6 v12 is 15 degrees. you need only one of them. V6 12,5deg or V12 15deg The vacuum cleaner…
Nativity Ornament with Star Hanger.
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as single or multicolor print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma Wood Shop.
You don't have a compressor but want to remove dust, wood shavings or other light dirt from your workplace? No problem! With this attachment for your cordless screwdriver, it's done in no time at all! Is it hot and you need to cool down?…
Tag s to decorate the Christmas tree or gifts
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
This is a detailed 3D model of a rose, perfect as a decorative piece or a gift for special occasions like Valentine’s Day, Mother’s Day, or anniversaries. You can print the rose in two ways : Single-color version : Print the entire model…
In order to make the Star ornament, you'll need to print two Star Orn Bodies, four Star Orn Arms, and one Star Orn Top. In order to make the Snowflake ornament, you'll need to print two Snowflake Orn Bodies, six Snowflake Orn Arms…
A classic, stylized appearance, featuring a tall, ribbed winter hat with a small pom-pom on top with a snowflake in its hands. Simple, elegant, modern.
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
I used two LED diodes and two 3032 battery containers to light it up from the inside. The trench also has notches so the light can come out should you want to add more leds to the inside. You can reopen it to change out batteries. things…
This is one of the models offered on my Patreon. Feel free to test out this model to see what kind of model you can get when you join today. All Patrons have access to EVERY model that has been released, no extra paywalls. I'd love to see…
Snowglobe ornament with raindeer, christmas tree, snowman and empty for your design If you like it --> press like it :-) Created a ornament for your christmas tree, which you can place at your fairylight and it will illuminate the scene…
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
2d rose collection - https://www.printables.com/cs/@Ts3D/collections/1208891
This fan-art project came about at the request of my two children, both of whom LOVE Bluey and Bingo and are the same age as the characters in the show! Made using Nomad on iOS. Print notes When imported on cura the models are…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES @Magnavis_ - Twitter & Instagram --- If you would like to show some support for my files, you can do so here:…
⭐ Woven Christmas Ornament Beautiful woven-style Christmas ornament designed for clean, support-free 3D printing. Perfect for holiday decorating, gifts, or printing in multiple colors. Print settings: Layer height: 0.2 mm Material: PLA…
This is number one out of three little mice figurines for the christmas tree. Having all three is perfect, if you really want to infest the christmas tree with cute little mice. Get the others here: Crawling mouse:…
Steel Furnace from Factorio is ready for printing. It shares the same scale as all other official Factorio models. The furnace can stand alone or could be placed snugly into tiles that are part of our grid system. Grids are included in…
Just a simple snowflake for downloading and modifying and decorations.
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
change the color of the filament at 5 mm to accentuate the inlay. check out my other christmas designs: SNOWFLAKE ORNAMENTS MERRY CHRISTMAS FRÖHLICHE WEIHNACHTEN COLLECTION GNOME ORNAMENTS 2 GNOME DEER
Stone Furnace from Factorio is ready for printing. It shares the same scale as all other official Factorio models. The furnace can stand alone or could be placed snugly into tiles that are part of our grid system. Grids are included in…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
Christmas tree angel ornament decor collection 2025 This is ornament design for your Christmas tree. Design comes into two parts the ornament and hanging part that stick on the top. If you enjoy my content by me a coffee. Thank you for…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
