Wyniki wyszukiwania: rowa

Rowan Atkinson, Mr. Bean Meme

Rowan Atkinson, Mr. Bean Meme

Microwave Rules Sign

Recommended print settings: Material: PLA/PETG Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: As modeled

Microwave Oven Turntable Coupler

Use PA (nylon), PC or some other temperature-resistant filament. Do not use PLA, or carbon-infused filament, as it is likely to heat up because of its conductivity. Printed at 0.20m QUALITY settings with 40% infill.

CNC Cable guide / Prowadnik kabla

Mój model wykonałem wzorując się na modelu wykonanym przez użytkownika "aroo" - jednak wymiary ogniwa znacznie się różnią jak również kąt łamania całego prowadnika jest jest minimalnie większy. Jeśli ktoś jest zainteresowany plikami…

Interlock Release Button for Built-in KitchenAid Microwave

Replacement interlock button for KitchenAid button KCMC1575BSS1 with sturdier construction.

Dollhouse Microwave

My daughter kept saying her dollhouse was missing a microwave and a 3D Printer. Well, here is her microwave complete with buttons. Door does not open. I got lazy and she said she didn't mind if the door is fixed. As a result the inside is…

Microwave Popcorn Holder

I couldn't find a microwave popcorn box that would use a FIFO storage method and be able to see how many bags were left in it. This will hold 9 bags of popcorn. 20% infill Some supports are needed. Printed with Numaker PLA+

Hangy Wangy MicroWang

LG Microwave Button Bracket

The door button on my LG microwave stopped working, because it is designed to connect to some very weak plastic tabs that act as a hinge. In my case, the plastic tabs broke off, and the button no longer worked reliably. I designed this…

Microwave Roller Ring Replacement

The wheel off my microwave roller wheel broke off, create a new one and improved with more wheels so it is more stable. Diameter of 19.5cm. Originally design for Sharp R-210D(W) Simple to print, I used CPE to print at 0.3 layer height.…

Microwave Door Latch

Door latch for microwave oven BEKO MGB 25333 BG. The original door latch tab broke and microwave stopped working. The service center offered only a complete door as a replacement, for which they asked €90, which I kindly refused. 3D…

GE Microwave Handle

Microwave door handle has been broken forever. Finally broke the rest of the way . So, modeled and printed a replacement. This one is significantly more stout than the original, so maybe it will endure my kids abuse. Printed in PLA, on…

Microwave Oven turntable spindle/coupler

A classic use-case of 3D printing… a flimsy replacement injection-molded ABS part costs a fortune to source and is discontinued by the manufacturer. This is the part that links the glass plate in a microwave oven to the driving motor…

Microwave Knob

This knob is a replacement part for the Whirlpool MD111 Microwave. It has two parts that you should glue together with superglue when you set up the correct angle for the 0 position. Print instructions Category: Replacement Parts Print…

Microwave turning plate replacement

Replacement piece for the turning plate of the Combi C105 microwave oven. Print instructions Category: Kitchen & Dining Summary Replacement piece for the turning plate of the Combi C105 microwave oven. It might fit yours, the outer shaft…

Microwave

model of microwave

Wire Shelf Rack (Microwave) Mount

I wanted to place my microwave on a wire shelf rack. The feet did not align with the rack, so 3D printing to the rescue! I figured I would share the model since I'm sure it could be useful for other appliances. Microwave is a Panasonic,…

Articulated Frutiger Aeroware From Die of Death Roblox Figure

"Robloxians are a thing of the past!" The most expensive, and best skin for badware. His scarf will be made out of fabric so Aero can move his neck. Print him out with PETG so that MAYBE this future might actually come anyways.…

Microwave turntable LG 5889W1A012A

Here is a replacement part for any microwave that has a standard Ø 180 mm 5889W1A012A turntable. It's commonly used in budget devices. All you'll need is a T10-T20 torx screwdriver for the assembly. Tip : print the sample test first to…

CNC Prowadnica liniowa - Moduł plotera frezarki OS Z

OŚ Z - do frezarki CNC - zamiast aluminiowej konstrukcji wydrukowany kawałek profilu konstrukcyjnego - Całość w połączeniu z silnikiem krokowym oraz śrubą T8 tworzą mechanizm który porusza osią Z - możliwość montażu zarówno wrzeciona…

Panasonic Microwave Door Release Lever 5Y00AP

A printable door release lever for Panasonic microwaves matching PN 5Y00AP / F82565Y00AP. Slightly modified with more internal vertical supports to make the part a bit stronger and print friendly. Print with the 45 degree surface aligned…

Throwable soul from deltarune

….

Alolan Marowak

.4 nozzle .2 layer height 3-4 walls supports needed

throwable knife

throwable knife excellent for outdoor play

Miele microwave turntable

YAGNI (You ain't gonna need it) But if you are really the one person on the world who also needs a replacement for the turntable of a 30 year old Miele M8160-2 microwave oven , send send me some kudos, please. Took the model from Zendama…

Growatt Fan Shroud

This is a fan shroud for a Growatt 2000 TL-X inverter. It may fit other inverters as well. It is 230mm wide and 40mm long at the the part which faces the inverter. It is designed for a 140mm fan. It brought the temperatures of my inverter…

Crucible mold 100ml for metal melting in microwave (BE: mould)

Update: Added a cut-up version of the inner dome for easier removal (for 5mm wall thickness). Use this 3d-printed mold to make crucibles from silicon carbide powder and waterglass for metal melting in the microwave. It holds about 110ml.…

Case for gameport adapter by Necroware

A case to hold gameport adapter with pro micro with USB-C port. Check the project here: https://github.com/necroware/gameport-adapter

Growatt MIC 600 - 1500 Aktiv Cooler

Habe hier eine aktive Kühlung für einen Wechselrichter von Growatt konstruiert. Da ich festgestellt habe das der Wechselrichter im Sommer gerne zu warm wird und dann drosselt. Ohne die Kühlung kam der Wechselrichter auf die 60 Grad, mit…

Necroware Gameport Adapter Case

https://github.com/necroware/gameport-adapter Necroware released this pretty great gameport joystick adapter PCB and software. It's the most comprehensive design I've seen, including some custom one offs I've build with direct wiring to a…

Microwave knob

Microwave knob I created for my microwave. Printed in BambuLab X1C from PLA, 0.2mm layer, no supports needed I added some tolerance for the shaft, add a comment if you want it modified Please upload a make if you print it, I'll appreciate…

Microwave Motor Model

Microwave Motor 1:1 - Accurate 3D Model for Projects and Reference This 3D model represents a microwave motor at a precise 1:1 scale, ideal for engineers, designers, and 3D printing enthusiasts who want to use it in their projects or…

Lily with microwave

Lily with microwave miniature. Print with support. Other models: https://makerworld.com/@Misakov/collections/5259590-sprunki If you like the print, don't forget to like it.

Mikrowellenregler / microwave control knob

This control knob was designed as a replacement for my mother's microwave. The original had a spring steel ring at the end, which i wanted to reuse to add some stability and strength, that's why the middle cylinder is narrower at the top.…

Microwave Cover / Anti-Splatter / Finger Grips.

Microwave Cover for Food / Anti-Splatter / Finger grips. Both are 65mm tall. The 210mm dia is the largest it can fit on MK3S. Material: Transparent Polypropylene (PP) or PETG

Arowana

Microwave Model

Supports: Yes Time: Depends on Scale Printer: I use an Ender 3 V2 Neo

GE Microwave Handle

The handle broke on our over-the-range GE microwave, so I slapped this together in Tinkercad to print a replacement. It has some issues, such as the mounting pegs are not evenly spaced on the handle ends, due to my assembly in tinkercad…

Zerowater tap button presser

If you have a Zerowater dispenser system, then you know this button for the tap. It's fine if you just want a small cup of water, but if you say, need to fill a 4L jug, your thumb is going to be numb by the end. This is where my Zerowater…

Whirlpool microwave handle replacement

The handle on my 20ish year old microwave was cracked and falling apart and I couldn't stomach paying $70 OEM. My partner started asking questions about buying a new microwave so I knew I had to jump into action. I was going to model the…

Microwave carousel wheel replacement

Tiny but useful! So, no lie, my microwave roller broke, and I got out the calipers and printed a replacement. I was worried that the PLA would melt in the microwave but it didn't. Not even after months. Fits my mircowave, rolls great.…

Growatt SPH inverter cooling

An update has been made. One dimension has been corrected and a variant with left-hand control has been created. For right-hand control, parts A-B-C-D are printed. For left-hand control, parts E-B-C-F are printed. For more information,…

Microwave Glass Plate Rotary Axe

it was one of those typical situations where I thought "if I had a 3D printer - I do!" The rotary axe of the microwave had become hot for some unknown reason, melted and the whole microwave was suddenly no longer usable. But it's a small…

Marowak Statue no.105/151

I made this in nomad sculpt a while ago when I was trying to model all the generation 1 Pokemon.

Bosch Microwave Door Latch

Bosch Microwave Door Latch

Kenmore Microwave Replacement Handle p/n 3650W1A075H

This is a replacement handle for a Kenmore microwave. The part number is 3650W1A075H but it's been discontinued. I've included the .stl file for the handle and also a base to which the handle can be attached for sanding painting. The base…

Lockheed Martin RQ-3 DarkStar (rubber-band launch/throwable)

A model of the Lockheed Martin RQ-3 DarkStar that can be launched with a rubber-band launch or thrown Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend real tabs UP (points nose up) Hold it just between…

Cable Chain 25x10 one side flexible (prowadnik przewodów)

Cable chain model with start and end support. Cable chain can be printed without support in horisontal position (last picture). You can easy adapt size to your needs in Prusa Slicer If you need any modification - ask me :)

Microwave Oven Knob Ignis AKL 530

A colleague broke one of the knobs on his microwave, designed this one as a replacement in Onshape. Can be printed with AMS it you want to have a black arrow at the top, however should be easy to color using a sharpie. Designed for the…

Samsung microwave turntable wheel/roller

Replacement wheel / roller for Samsung microwave oven. Because of the worn wheel, my turntable made strange noises.

ZeroWater Filter Adaptors

We had a need for some really clean 0-ppm water, without the expense of gallons of distilled water, for a hobby project. We prefer the ZeroWater filters due to the gravity feed design, slow passthrough enabling consistent 0-ppm, and they…

microwave

microwave

Door opener key for microwave ovens SAMSUNG DE66-00226A

The dimension are correct, printing from petg plastic

Replacement buttons for AEG micromat microwave

One of the buttons of my microwave broke off and instead of buying one I used it as an exercise in reverse engineering. I decided to print it in 2 parts too avoid supports since there isn't much space to remove the supports and the…

Hollow knight pure vessel throwable

if it breaks, too bad.

HDHomeRun Quatro & 4k QuatroWall Mount

Wall mount for the HDHomeRun Quatro & 4k Quatro. I use Spax #6x5/8" screws for mounting. Print instructions .2mm layer height, 15% gyroid infil

Panasonic Microwave Door Button

Button designed to replace a broken door button for a Panasonic microwave. 2018-10-25 Update: Added some curves to strengthen the design. Category: Kitchen & Dining

Microwave Door Latch

A friend's microwave door latch broke and asked for a replacement. Cooked this up in Fusion 360 only to realise there were similar models available online that could have worked. Nevertheless this was a fun project. Hope my version works…

Small Microwave Flower Press

Small press to dry flowers in the microwave. The press is 65mm x 65 mm and printed from PLA. Bottom has a recess for a piece of corrugated cardboard as a cushion, flowers can be dried between 2 pieces of paper towel to absorb moisture.…

Microwave Plate Stand-Riser

I printed the model with PC (polycarbonate) - high temperature filament suitable for microwave. No printing support required. Settings are shown on a pick attached. Who colors are for aesthetic purpose and the second one is not…

Lever Microwave Door

This part is pressed to open the microwave door. the microwave door is locked and does not have a handle, To open the door you press this part and the microwave door opens. This part is for a Samsung microwave.

Siemens Microwave Knob

Replacement of Siemens microwave oven knobs (originals (Pekalit) broke out at shaft). Small nose for scale printed as separte part to enable easy usage of different material a have an nice, sharp contrast. I used PETG (black) for the main…

Doorlatch for Thomson microwave oven

Door latch for microwave oven Thomson Microwave Oven COMBIMAT 25. But I would not be surprised if it fits other models and brands as well since they all look alike. These door latches break off easily. Mine did as well and after numerous…

Manopola microonde universale - Microwave knob

Manopola microonde - Microwave knob Manopola timer per microonde - attacco universale

Microwave Cover Hook

I made a few changes to the hook to hold onto the cover a bit stronger. I also made it wider so that it could be mounted with a command hook strip instead of a screw.

Feet risers for microwave Candy EGO-G25DCS

These are some simple feet risers to rise your Candy EGO-G25DCS microwave oven. Print instructions Material PLA Resolution 150 Supports No Brim No

Switch Arm for Ikea Microwawe Oven Kulinarisk

Support Yes, 100% Infill. How to change, loosen the 2 screws at the hinge, lift up the locks, pull the oven lid out of the oven, loosen 2 screws for the plastic cover, saw off the broken part, glue it with, for example, hot melt glue.

Kenmore microwave handle

I needed a replacement handle for our Kenmore microwave, model #40185049210 and did not want to pay over $60 for one including shipping. So, I took some measurements of the old one, and had one ready the next morning ready to put on! I…

Microwave refresh bowl for silica gel

What is it good for? I use this bowl to refresh my silica gel in the microwave. Put some kitchen paper in the bowl to avoid melting the plastic when the silica gel gets hot. Put it in the microwave at lowest power for a minute. Get it out…

Plate rollers for Sharp microwave

Replacement plate rollers for Sharp microwave Old rollers had worn so badly that plate did not turn smoothly and made a lot of noise These rollers snap onto the existing frame Print instructions No special instructions. I used PETG.…

Microwave plate rollers

Microwave plate rollers fore LG

Flashforge Adventurer 5M pro Uchwyt boczny do filamentu z prowadnicą

Uchwyt boczny z prowadnicą dzięki której filament rozwija się równomiernie.

HO Scale Spacers used to build Comunications Tower with Cell and microwave Antenna

HO Scale Spacers used to build Comunications Tower with Cell and microwave Antenna Using florest wire the spacers make a HO Scale tower. Cell and microwave antennas included My source of Model train things is WWW.RailGoose.com Print…

Priktol (Throwable Spinner)

This is another trip back to my youth. As boy we liked to play wit a “priktol” (dutch for throwable spinner). You wind the cord tightly around the spinner as shown in the pictures. You can make a loop in the end of the cord to place this…

Money Fish Arowani

The most popular Chinese good luck fish is the Arowana (or "Dragon Fish"), symbolizing wealth, prosperity, and strength. Other significant lucky fish include Koi , representing ambition, perseverance, and good fortune, and Goldfish ,…

Microwave Door Part

This part is a replacement for a part in my microwave door. This part is fixed in the door and latches to the microwave which allows the door to open and close.

Microwave plate rotator connector

Spojovací váleček otočného talíře v mikrovlné troubě. Tento je pro značku Baumatic, ale bude fungovat i jinde. Na fotkách je kousek po několika měsících používání. Je to PLA, ale v podstatě to teplotně stačí. Když tak se po čase vytiskne…

Sharp Microwave Door Open Lever MLEVPB016MRF1

3D model of MLEVPB016MRF1. It will Requires supports, but I have designed it for printing as much as possible. Fits many Sharp carousel microwave models. Here is a list of what microwaves it fits: • R1210 • R1405 • R1406 • R1461A • R1462A…

Rowan

Rowan is 204 mm long x 50 mm high x 20 mm deep. It is made with SketchUp 2015 using the Arial Bold font. Print instructions 10% fill

Microwave rice packet dispenser

A dispenser for storing microwave rice packets easily and being able to use them without having to unpack the storage area.

Replacement Microwave Handle - ME16K3000AS

WIP - the handle is maybe 0.2mm too long over it's entire length, and there's not enough margin on the “boltway” parts: I cracked my handle slightly while putting them in. But it fit on line, so I probably will not fix this model, unless…

Knobs for a Whirlpool M501 Microwave Oven

Is printed in two parts which need to be super glued together. No brim or support needed. Printed in PLA.

Microwavable Desicant Cartridges

Fully 3D printed desiccant cartridges for microwave generation - must be 3D printed from polyamide or any other material with temperature resistance above 125°C. Do not print from carbon fiber reinforced material - may cause them to melt…

Rowan Sebastian Atkinson (Mr Bean) - Bust

Rowan Sebastian Atkinson Buste Ce buste représente Rowan Sebastian Atkinson, acteur et humoriste britannique mondialement connu pour son personnage emblématique Mr Bean. Inspiré de la photo la plus populaire du personnage, ce modèle…

Thule EuroWay G2 13pin plug holder

13pin plug holder for 25mm rods e.g. Thule EuroWay G2 towbar bike rack -------- 13poliger Steckerhalter für 25mm Stangen z.B. Thule EuroWay G2 Fahrradträger für die Anhängerkupplung ---- Printed in PETG with a 0.6 nozzle

Microwave

cool microwave model I made

Ikea microwave plate drive replacement part

Ikea microwave plate drive replacement part

Basic Microwave Oven Handles

This is my answer to the high cost of appliance repair. These handles have holes set at 189mm. I have included the step files if you need to modify either of these models. Printing For style 1, you may want to print it on it's side with…

Microwave knob

The most fragile part of a microwave

Panasonic Microwave Door Lever (F82569Y00AP)

Fits microwave model NN-SN661S and possibly others. Panasonic part # F82569Y00AP Printed just fine without supports on my printer, but your mileage may vary (see orientation in photo). (Probably would have “looked” nicer in a different…

Mikrowellenregler ohne Federring / microwave control knob without spring steel ring

This control knob was designed as a replacement for my mother's microwave. This version doesn't have the narrower part of the middle cylinder, which was meant for a spring steel ring. Print Settings Printer Brand: Creality Printer: Ender…

Reused microwave fan

Hello, This box was created to adapt an old microwave fan to a wall mount. The structure for mounting the fan was taken directly from the microwave. The model number of the fan used here is: SMF-745EA1 Category: 3D Printing

Microwave Cover Mount

Quick and dirty mount for a plastic microwave plate cover Print instructions No specific considerations other than maybe using PETG, the cover can get pretty hot

Articulated Arowana

Arowana species typically grow to around 2 to 3 ft in captivity . Arowanas can be troublesome to keep as pets. They are expensive, require wide living space, are picky eaters, and need a lot of care. Arowanas are renowned for their…

Microwave Knop

It is just a simple replacement for my broken Microwave Knob

RetroWave OPL3 Express Shell

3D printable shell for the RetroWave OPL3 Express with a volume knob

Low Poly Microwave Oven 3D Model

Low Poly Microwave Oven 3D Model

Microwave Plate Cover Wall Hanger

A simple hook to hang your microwave plate cover.

Microwave riser

microwave riser for IMT service truck

Cosmic Microwave Backround Radiation scaled one in 2*10^28

Originally published here: Cosmic Microwave Background Radiation scaled one in 2*10^28 by tato_713 - Thingiverse This model was made using the data of the Plank spacecraft of the Cosmic Microwave Background (CMB or CMBR), processed with…