465 modeli
I made a sheath for this katana that can be articulated for more dynamic katana poses. It should be printed in the normal orientation with the sheath printed flat face down. If the sword doesn't fit then try flattening the sword with…
My wife is always misplacing her small thread cutting scissors. I made this simple easy-to-print model so that she can store her scissors in a sheath on her sewing machine right were she needs them. The sheath can be mounted to the side,…
Remix of Parametric Kitchen Knife Sheath by bikecyclist and vorpal (Steve Pendergrast) Should work for any knife that is pointy at the end. (For non-pointy knives, guesstimate the length the blade would have if it had a point.) There is…
A variation on my original katana sheath design for Lucky 13 but now with the more articulated Dummy 13! If you have my sheath and a katana then no need to print a different one because this new waist for Dummy 13 supports that sheath. If…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy Tools Needed: Deburring Tool and Small Needle-Nose Pliers Introduction & Instructions: QUICK-CLIP is a versatile mounting system…
STL files to 3D print mold components and PDF files for patterns to make a Medium multitool sheath (patterned to a Leatherman Fuse - also fits a Wingman with clip attached). Finished inside dimensions are: - Medium Multitool 4 x 1.3 x .7”…
modeled this up for fun. split into manageable parts, blade takes a 1/8 in rod(suggest metal). Category: Props
Well, I needed a sheath for a paring knife in the kitchen box of my camper. Printing a knife sheath is mostly problematic since overhangs and layer orientation tend to make the part weak, ugly or simply impossible to print. Then I had the…
I described this as"scalable" rather than “parametric” - the clear opening dimension of the model is 25.5mm x 4.4mm and it's a very easy calculation to measure the size of your chisel and scale the relevant dimension in PrusaSlicer. Link…
print with support
I added a rounded version as the first one was a bit to pointy and sharp for training/mock purposes. It is 0.25" holes for the sheath. I suggest grommets, but you can use whatever you want. Works amazing, a tad tight for the real sheath,…
I created 3 conjoined katana sheaths to replicate the iconic ones used by Zoro in One Piece for the Dummy 13 figure. For more Dummy 13 and One Piece related designs, please look at my other models. I hope you enjoy my designs! :)
Dread Pirate Roberts sword sheath from The Princess Bride Printed in PETG and 0.2 layer height. It is convenient to add some brim to all the pieces Supports only needed for the sheath_up. Sheath interior pieces are numbered in the upper…
sheath made in tinkercad for the Skyrim steel dagger
This is a bread lame used to score bread before baking it. I made it as a gift my uncle who is a baker. I can’t guarantee that it will work, but at least it looks nice. It should fit most double edged razor blades. There are two pyramids…
I wanted a slim sheath for Tea Break Gaming's Utilty Knife MK2. My own testing proves them to be quite secure. If you want a tighter "fit" you can use heat to gently bend the retention tab at the back of the sheath, tune it to desired…
Elevate your reading experience with this 3D-printed Short Sword Bookmark and Sheath, designed for book lovers and fantasy enthusiasts alike! This creative design combines form and function, turning your favorite book into a battleground…
I have a lot of Victorinox knives in my drawer and they come without blade protection, I have developed a knife sheath for these knives. Now it's safer for everyone in the household and you can simply reach into your drawer and get the…
i made this Knife sheath because i felt that it was missing something without it. David designed the knife model and i thought it was quite impressive, link to his profile and knife file bellow. i printed with gyroid 15% infill but i…
Sheath with belt/pocket clip for the Klein Electrician Scissors 2100-7 and 21010-6-SEN. Might fit other models but is designed for those 2. The clip is 1.5" long to clip around most belts. Opening at the bottom to prevent dirt/liquid…
I created this as a custom knife sheath. Can be modified to fit your knife with some cad time. Two versions.
Design inspired by the Laffs Dynamics UAMD, but I handmade the step file myself. I also created a snap fit sheath that stands upright. The sheath sizing ensures that the sharp point is not compromised. Scale up or down as needed. My hands…
A 3d printable edge guard or sheath for a 1-1/4lb Camp Axe (easily fits axes 3.5 inches or 95cm tall). It has two posts on either side to keep it secure to the axe using rubber bands or string. I printed mine out of PETG, but other…
The scissor sheath is a handy accessory that ensures the safety and longevity of your scissors. With a sturdy and protective exterior, the sheath keeps the blades covered and secure when not in use, preventing damage and accidents. The…
Inspired by Majed's iPhone Charge Cable Protector design, this adapted to work with MacBook charging cables. I recommend to print vertically with brim for good bed adhesion. Even though this may seem like a simple model, it still takes…
I've been playing around with 3d printed sheaths. this is for a cheap Walmart survival knife. the brand name is Ozark trail. a key feature is a "retention spring", an arm that engages with the "grippy" edge of the blade. its a belt carry…
Karambit knife sheath break or chip? Need a replacement or additional sheath? Want a cool way to show off the blade of your karambit knife without the risk of damaging the blade? Well look no further! Because with a couple brain cells, no…
This is set of sheaths (small, medium and large) for the Ikea 365+ 3-piece knife set. Printed on a CoreXY printer standing upright with a brim. In this orientation, no supports are needed, but it might not be viable on bedslinging…
Print the Sheath on the side and support the clip.
This is a custom lightsaber that is designed to fit a cheap lightsaber from amazon in it. All the parts are in numbered order of how the need to be attached together, you will need glue/adhesive for them. Here's the lightsaber it was…
This is a remix of https://www.thingiverse.com/thing:3272290 I made changes to the sizes so that the sheath fits flush on the knife and added other sheaths for other knifes. BeaverCraft wood carving sheaths. You should rotate the items in…
Wearable sheath for the Fiskars X7 hatchet. Can be mounted to Tek-Lok style belt clips. Mounts facing forward on the left, mirror parts for right. Two mounting styles: fixed or pivot. Pivot can spin around on the belt clip, fixed cannot.…
Designed to fit a Victorinox boning knife, model number 5.6603.15 with the Fibrox black handle. If you want the TinkerCad link, let me know. Prints with the flat side down, no supports. 0.2mm layer height works fine, but I ended up going…
Knife protector to store a knife in a drawer. I use this for travels, so I can always have a good knife with me. Embedded magnets in the print allow it to stick to the blade.
It might need to be run under warm-hot water with the knife going in and out a couple of times.
Katana from mrhers2 https://www.thingiverse.com/thing:3118086 Turtle Shell by jootoole https://www.thingiverse.com/thing:4983162 Strap used… https://www.amazon.com/gp/product/B07H1D15LZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Sheath done. Add/sew your own straps and you should be done. No snap buttons should be needed, just use velcro WIP for knife. Open in 3D Builder if you wanna check it out. I did this to destress myself from other work so it will take…
Will fit 7 or 8 inch knives. Made to fit my Tonto Knife and many others. Scalable to other size knives. https://www.printables.com/model/401748-flat-back-tonto-knife-ez-print The clip is split on the bottom to allow it to slip on. You can…
Remix of Parametric Kitchen Knife Sheath by vorpal (Steve Pendergrast) Check out https://www.thingiverse.com/thing:2893654 for an improved version of this thing. Should work for any knife that is pointy at the end. (For non-pointy knives,…
This is a retention sheath for a full sized Kabar (1211 in my case). The sheath has two lugs that bend downward when inserting the knife into the sheath and spring up behind the cross guard, retaining the knife in the sheath. To remove…
Et tu, Brute? Brutus is a a tactical play knife that is the perfect accessory to your battle belt! Featuring a large, knurled handle for adult hands, satisfying locking sheath, and belt attachment points, Brutus is your go-to quick-draw…
Easy to print sheath for Victorinox Fillet knife
This is a sheathed solid katana. was tired of finding katanas, and sheaths, but not a katana in a sheath, so I put them together. Category: 3D Printing
Calling all Hoomans! Don't forget your load out when exploring civilization. This dagger can break down for easy storage in your cosplay suitcase when traveling. Includes a stylish sheath. 6/23/25 - Added a belt loop option for the…
This is a small sheath/box for up to 19 nozzles with M6 thread (like E3D V6). Each adapter pit features six little 'flat springs' so that the nozzles have a safe grip and don't get lost even if the box is turned head over, while they can…
Sheath for a Victorinox paring knife (model 5.0631). Protect your blade and your fingers. Print Settings Printer Brand: MakerGear Printer: M2 Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Notes: Set your line width to 0.4mm for…
Add some samurai-inspired flair to your reading routine with this custom-designed Katana Bookmark and Sheath! This 3D model is perfect for makers looking for a unique and functional project. • Bookmark: Designed to resemble a sleek…
Please see this forum post for further information/instruction: I Created a 3D Printed Sheath That Should Work With (almost) All Scales (WORK IN PROGRESS) - Spyderco Forums
Yet another knife sheath Category: Hand Tools
1/6/20 Added additional file with tighter internal tolerances + lanyard hole Tool bag and myself kept getting cut up by my Irwin Drywall Saw. Made this simple sheath to solve the problem. Print standing upright with brim Print…
Simple holster for your surge. Tool clips in place.
I wanted a safe way to carry the Victorinox 5.6663.15 "boning" filleting knife since it does not come with a sheath and I am always carrying it along with a bunch of other fish cleaning stuff. I wanted something with holes for easier…
Printed in two parts and glued together. The other half is the same part mirrored.
This prints as oriented. Max bridge length is ~10.5mm, and the tolerances include this bridging. Sheath is just the right kind of snug! the orange one has a bit of holofoil laminate on it 😎
This is a clip on belt sheath for an 8mm(5/16") diameter ferrocerium rod fire starter (a.k.a. a ferro rod or fire steel). I wanted it to be as convenient and secure as my knife sheath, but since I wear the knife more often than I'm in the…
This is the dagger of the empire from the TOS episode "Mirror Mirror". The STL is in print layout. There is some tough bridging so you may need to slice it differently if your printer has issues. Mine printed fine in this layout. DO NOT…
There are two models , the first uses the cross sheath ( X ), and the second uses the side sheath ( \\ ). I had no trouble printing them witout supports, and they fit well, but you sometimes have to clean up the part that the lego guy is…
Update 10/10/24: Added 2 sheath options; lid only cover & belt clip holster; This is an ergonomic utility blade holder modeled to fit a standard Stanley blade. It does not need screws as the head of the holder has a small latch that bends…
This key sheath helps identifies your keys, protects your pockets, and also makes them easier to to use. With just three filament colors you can create 6 different color combinations for identifying your keys. And with the pointy end…
Love the knife but didn't like that it didn't have a sheath so I made one. Has some flexures to keep it on the blade. Print in PLA at .3mm layer height. Prints in 30 minutes and you can edit the text in PrusaSlicer to say whatever you'd…
Using the https://www.printables.com/model/53253-parametric-kitchen-knife-sheath-improved-remix parametric file, I made a sheath for my Victorinox Santoku. Printed with the thin, non-curved side down in Prusament PLA. Fits well and…
The Vargo Dig Dig cat hole shovel / trowel is an amazing tool, but has sharp edges. Protect the contents of your bag with this sheath / case! The sheath was designed to print with 95A TPU, which gives the ability to push in / pull out the…
Material: 15 g TPU (geschirrspülerfest / dishwasher safe) Druckereinstellung: Layerhöhe 0,2 / Infill 20 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / No Support Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I…
I'm using this design to encase old credit card sized hotel room keys I've repurposed for use as NFC tags that trigger home automations. There are two versions of the model, a single sided slide over cover, and a double sided click…
I made the Modell longer for : Victorinox "Tomato and table knife" 220mm Print in stl file orientation ! Printer : Flsun V400 Walls 4; top 10 ; bottom 10 layer height : 0,1 line width : 0,4 infill 25% ; no support ; print time ~ 1,5 h…
This is a protective sheath for your Huusk knife. Once printed, you insert the blade into the sheath and the attached cylinder will pop into the finger hole on the knife. To remove, you simply push the cylinder out of the knife and the…
I recommend making it in ABS (in a closed room) for better flexibility and durability. Rivets or screws required. Once all the pieces have been printed, simply join them with screws or rivets which can also be purchased online for a…
Here a junction part to join 2x sheath of 20mm. I know, you can buy it for 0,20 eur in bags of 50, but if you only need 1 and on a Sunday, it's useful :-) You just need 2x zip ties and print 2x times the stl. I printed it in PETG for…
My take on a carpenter's speed square belt sheath. The square lies flat against your body with the wide side up. There's a retention feature to keep the square from accidentally getting knocked out. The belt clip is sized for 2in (50mm)…
This is a simple knife sheath, the bottom is flat and the top parts come together to hold onto the knife's side. it is X6 Y220.6 Z22 all in mm. i printed with a brim for added stability, had to print on a diagonal due to my printers bed…
This clip securely attaches to your Bark River leather sheath. It enables you to easyly attach or remove the sheath to to your belt, pocket, backpack or wherever you want to hang it. There are two versions. The small version fits the 6.75…
Paring knife sheath for a Zwilling JA Henckels 3" blade. Tree style support breaks away easily and is adequate for supporting the curved end. Printed with layer height of .16
I always take a large kitchen knife with me on holiday. We usually rent apartments and like to cook local meals or just make a salad for lunch and whatnot, and the kitchen equipment tends to be of the "at least people won't steal this"…
as other models didnt workout for me, i created one by myself. both parts need to be aligned and then welded together, e.g. with soldering iron. or use some glue.
A 3d printed pocket sheath for a metal ruller, based on this video from Jer Schmidt: https://www.youtube.com/watch?v=EFyggXQJr2Y Made for a “Starrettt No. C330”…
Single-piece sheath for for 4.5" Gingher Knife Edge Thread Nippers. When these scissors are left loose in a bag they remain open and can get snagged on craft materials, or worse, your hand! After a few tragic mishaps (one of which…
Had enough trouble while carrying your axe for a barbecue or camping? Why not use a sheath? Well my axe came without a sheath and I had to make one. It is printed in PLA with 100% infill.
This is a fully parametrized model for a knife sheath. The dimensions may need to be changed to match your knife dimension and printer tolerances. Several styles are available as shown in the pictures. Printing with the sheath along the…
I needed something to cover the tip. Just the tip. Tip of the scissors… from poking other things in my luggage. My slicer setting: 0.6mm nozzle 0.3mm layers Print thin walls on PLA
Remixed from another model where he did all the hard work, I just modified it to fit my personal preference, I wanted a belt clip that fit horizontal instead of vertical so I reoriented the clip and opened the bottom side and reinforced…
After printing, glue halves together. Printed in PLA. Stays on very nicely with just a bit of friction. Knife model DM0718.
A simple side-sheath for my collapsible needle sword: https://www.printables.com/model/1417745-hornets-needle-collapsible-sword-hollow-knight-sil Print with no supports, then just loop a belt through it. May only work with belts approx…
!USE RESPONSIBLY! A basic sheath for Opinel No08 knives with clip. Made this for quick access for work. V2: Added 2 nubs for better/more durable friction fit. Print settings: Print in PETG or PLA(+) at 0.2mm layer height with the tip…
10-29-25 note: while this works for whatever brand of drywall knife I have and gives it a very nice fit, it may or may not work for yours. One person said it was too small for theirs in the comments and they had to cut it off. You could…
Traditional Yemeni Jambiya Dagger with Sheath, V2. The Cover requires support for the curved tip. I used organic support. Dagger may benefit from support too. Using brim helps in print stability. You may also like the other design found…
Need a sheath for your fancy German made WUSTHOF gourmet knife? Well here you have it. I added the WUSTHOF logo on the side for some aesthetic flare, but does not represent an official endorsement by WUSTHOF of this 3D model. The knife…
I've got to admit, working on this project was an absolute blast! My trusty Leatherman Rebar multitool deserved more than just a plain old nylon sheath. So, I went full DIY mode and crafted a lightning-fast draw sheath that matches my…
[Update 22.Aug.2026] New version: [Update 28.Jul.2025] After two and a half years, I'm still wearing and using this sheath daily without any problems or failures. ------ Tops used to ship the Baja 3.0 with a sheath that could be carried…
*******MODELED IN INCHES. SCALE TO 2540%******** No supports needed. Made for my wife's Ciri cosplay. Glued pieces together then put apoxie sculpt putty between the seams of the connecting pieces. Let it harden for about 12 hours then…
I made this to carry a pair of offset scissors on my belt. They fit snugly but were able to easily pull out. I printed it standing up (with the opening up) which I was worried about but it ended up printing fine. I used 4 roofs and 2…
I recently got a 10" chef knife off of Amazon. It does not fit in my knife block so I decided to make a simple sheath for it.
I recommend printing it in PETG with 40% infill and using support material. The sheath incorporates a compliant mechanism that keeps the knife stable without any rattling. For the clip configuration, you can assemble it using 2 M3 X 12…
Yeehaw, a knife sheath for your fancy knives. I went three years just wrapping my ole reliable santoku in a towel and some rubber bands. I think it's time for an upgrade. This project requires: [7x] m3x5x4 heatset inserts [voron spec]…
Thread snips, sewing scissors, Chinese scissors… whatever you choose to call them (they're pictured below), are quite useful. However, the ends are quite sharp and can puncture anything easily so a sheath was needed. I found a cover that…
The old sheath for this oddly shaped serrated knife went missing one day, and now that I finally have a 3D printer and some CAD skills I made this simple solution. Happy printing :)
Suitable for cheap plastic u-shaped scissors ( https://aliexpress.com/item/1005006535915243.html )
Because my friends and I keep losing mora sheaths Prints best in ASA, print opening to base, use supports only for lower ⅓ overhangs screws line up to 2.5 in screws for a gravel bike (if you are feeling mad max)
Simple utility blade holder. Slide tab in one way to open and the other to close. Blade remains partially exposed but unable to cut. See more at: Instagram: @3DBrooklyn Facebook: 3DBrooklyn 3D Brooklyn 3D Modeling, Laser Cutting and 3D…
A friend aproached me with an IKEA VÖRDA / VOERDA knife, asking if i could try and design some kind of sheath, that would allow him to safely transport his favourite cooking tool when camping, going to outdoor BBQ events and so on……
