P
Printables3D_D3
Sigma moai
I printed the sculpture little bit bigger than in .stl . As a template, I used sigma squidward. Enjoy your printing, and a enjoy moai! And don't forget to follow me for more models;}
- Pobrania
- 1318
- Polubienia
- 93
- Ocena
- 4,9
Wyniki wyszukiwania: sigm
Liczymy pasujące modele…
P
Printableskloto
Sigma Aura 80 GoPro Mount
The mount holds the bike light in a snug fit. Use M3x4 screw to fix the light in the mount (optional, but recommended). Due to the tight fit, PETG is recommended (Also because of the dynamic loads on the part during driving) Printing in…
- Pobrania
- 804
- Polubienia
- 14
- Ocena
- 5
P
Printablesiggy
WC pusher plate - Geberit Sigma compatible | Drückerplatte
WC Pusher Plate (Drückerplatte), compatible to Geberit Sigma I accedentaly bought a Delta pusher and had to fit it to a Sigma backend. Instead of returning it and getting a fitting (and more expensive one) I made a Sigma-compatible pusher…
- Pobrania
- 581
- Polubienia
- 38
- Ocena
- 5
P
PrintablesSablebadger 3D
Gaming Tokens - Age of Sigmar
A set of gaming tokens or markers for use in table top gaming. This set is part of series of releases with similar dimensions that allows for multicolor printing with a simple layer switch. This set is for the game Age of Sigmar, and was…
- Pobrania
- 574
- Polubienia
- 48
- Ocena
- 4,5
P
Printablesmegafrost
Adapter for Geberit Sigma Flush Plate on UP100 Cistern
Adapter for Geberit Sigma Flush Plate on UP100 Cistern The Geberit UP100 is a popular concealed cistern model. However, its compatible flush plates often lack the aesthetic appeal of the Sigma series. Unfortunately, Sigma flush plates are…
- Pobrania
- 574
- Polubienia
- 17
- Ocena
- 0
P
PrintablesMcHuna
Geberit adapter to SIGMA buttons
Adapter for toilet module GEBERIT DELTA. You can use the GEBERIT SIGMA buttons. Instructions: remove DELTA button remove black frame and parts add adapter frame and new parts use spring and blue wedges add new SIGMA button Printed on…
- Pobrania
- 562
- Polubienia
- 13
- Ocena
- 0
P
PrintablesTEDesign
Sigma Aura 100 GoPro Adapter
I had the porblem that my bicycle lamp sigma aura 100 was mounted on my handlebar and it did shine onto the garmin navigation device. I had the opportunity to mount it under the mount with a GoPro-Mount. So I designed a holder for my lamp…
- Pobrania
- 454
- Polubienia
- 37
- Ocena
- 4,67
P
PrintablesDauntless
Sigma's Hyper Sphere Weapons - Overwatch
I wanted one, so I made one. Not scaled, sizings eyeballed, but it looks pretty good and is decently accurate to the geometry I could see without having the models themselves. This includes the inner face of the orb. The model is around…
- Pobrania
- 397
- Polubienia
- 78
- Ocena
- 5
P
PrintablesAngelius
Garmin/Sigma Rox 11 mount above stem
Garmin/Sigma Rox 11 mount above stem Again another Gramin / Sigma Rox 11 mount for a handlebar diameter of 31.8mm. I Designed this for my own needs (fits perfect over a canyon v12 stem) so i hope it fits for you. It's easy to Print but…
- Pobrania
- 375
- Polubienia
- 51
- Ocena
- 5
P
PrintablesSukatraps
Sigma Aura 80 GoPro Halterung
Mount a light to a gravel bike upside down is not as simple as thought. The solution to my SIGMA Aura 80 light was to design and print a bracket to mount it beneath my QUADLOCK out front mont via a gopro adapter. Print upside down (flip…
- Pobrania
- 366
- Polubienia
- 11
- Ocena
- 0
P
PrintablesSIGMA LAB
KEYRAMBIT SHARK 1.0 FLEXY FISH keyflipper for sigmas
PRINTING SESETING: MATERIAL: PLA, PETG, ABS, ASA SUPORTS: Normal ADESION: YES
- Pobrania
- 326
- Polubienia
- 17
- Ocena
- 0
P
Printablesdiamondblack75
Sigma Aura 80 to GoPro Mount - print without supports
What a frustration not to be able to simply detach the lamp from the handlebar without removing the whole mount. So, I designed a sturdy mount that can be attached to a GoPro mount. This mount considers physical constraints, so the…
- Pobrania
- 326
- Polubienia
- 25
- Ocena
- 5
P
PrintablesSmok7kp
5 x 2 x 32mm movement tray for 9th age/warhammer fantasy battle/age of sigmar/40k unit of ten models with 32mm base
Simple model made in tinkercad, can be resized with some trail and error. Made so i can play some 9th age with me bois after 40k got too anoying. I printed it with some crappy PLA and 0,3mm layer hight, wouldn't invest any more in it.
- Pobrania
- 325
- Polubienia
- 26
- Ocena
- 0
P
PrintablesToby3D
Sigma Aura 60/80 to GoPro Mount
Printed in PLA with 4 perimeters - 2-piece print without support (One-piece print also attached, but more complicated to print) Combine parts with glue and screw tight (in the correct orientation) 10mm M3 screw used also find my Print in…
- Pobrania
- 307
- Polubienia
- 14
- Ocena
- 4,75
P
PrintablesDoctorHorsewhip
Age of Sigmar Spearhead Points Tracker
A points tracker for Age of Sigmar Spearhead. Points broken down into victory points and battle tactics. Fits 16mm dice. Printed with Polymaker marble PLA with ironing.
- Pobrania
- 302
- Polubienia
- 22
- Ocena
- 0
P
PrintablesENKI
Sigma Mount AURA 60 ( 80 )
Just a little plastic piece from a Sigma Aura 60 Lamp (Mine works fine after 1 year of using it) Print Settings Printer: custom kinda Anet+ kinda E3D+ Rafts: Doesn't Matter Supports: Yes Resolution: 0,4 Infill: 100 Filament: Old stuff PLA…
- Pobrania
- 295
- Polubienia
- 28
- Ocena
- 4,67
P
Printablesigfarm
Lens hood for Sigma 18-50mm lens
I created this lens hood because the stock one did not allow me to install a magnetic filter ring on the lens.
- Pobrania
- 282
- Polubienia
- 26
- Ocena
- 5
P
PrintablesAngelius
Canyon G5 Spacer Mount for Garmin/Sigma Rox 11
An other mount for my Sigma Rox 11 (Garmin Base). This time for the Canyon G5 Stem . You need two M3 countersunk screws ... i used my dermel to shorten them. Design is basd on an other mount from Lars Vogelenzang but build from scratch.…
- Pobrania
- 274
- Polubienia
- 20
- Ocena
- 5
P
PrintablesMousearnickle
4th Edition Age of Sigmar Compatible Objective Markers
I've knocked these together very quickly for the new edition of AoS, but would absolutely be compatible with other games. The central circle is 40mm in diameter, and the outer edge of the larger circle sits 3-inches away - no need to…
- Pobrania
- 236
- Polubienia
- 11
- Ocena
- 0
P
Printablesdave
paints & brushes holder in tribute to Warhammer Age of Sigmar
For 6 citadel paints and 3 brushes
- Pobrania
- 230
- Polubienia
- 53
- Ocena
- 5
P
PrintablesRM772productions
Sigma 17-50 F2.8 EX HSM Lens Hood
A Perfect fitting Lens Hood for the Sigma 17-50 f2.8 Tested on a A1 mini
- Pobrania
- 224
- Polubienia
- 15
- Ocena
- 5
P
PrintablesDoctorHorsewhip
Age of Sigmar Spearhead Points Tracker With Twist Column
A points tracker for Age of Sigmar Spearhead. Points broken down into victory points, battle tactics, and points from twists. Fits 16mm dice.
- Pobrania
- 214
- Polubienia
- 18
- Ocena
- 5
P
PrintablesOliver Thomsen
SIGMA BLAZE mount (GoPro compatible)
Needed a mount for my new bike and since there was no space on the saddle pole left for the default BLAZE mount, I decided to design one. The BLAZE light snaps into the mount, so no extra fixation is required and it can easily be removed…
- Pobrania
- 209
- Polubienia
- 27
- Ocena
- 4,25
P
PrintablesMárcio Coragem
Sigma Buster mount
Handlebar mount for the sigma buster light. I recommend to be printed in ASA. I used a mix of ASA for the main body the grey pieces and a PC for the black. ASA is better for the flexibility and pc for rigiditity. But just ASA/ABS will…
- Pobrania
- 208
- Polubienia
- 13
- Ocena
- 5
P
PrintablesSIGMA LAB
SIGMA SPINER 1.0 keyrambit
Keyrambit spiner do kręcenia kluczami. additional elements:https://allegro.pl/oferta/lozysko-kulkowe-61803-6803-2rs-17x26x5mm-15713802966 material: PLA, PETG, ABS, ASA infil: 40% supports: NO
- Pobrania
- 198
- Polubienia
- 16
- Ocena
- 0
P
PrintablesAntonio Valente
Chad Moai Sigma Whistle
Whistle in a moai head, simply the chaddest whistle in the world
- Pobrania
- 191
- Polubienia
- 21
- Ocena
- 5
P
PrintablesCikro
Sigma ROX4 Speedometer Holder
Sigma ROX4 Speedometer Holder for fix with cabel ties
- Pobrania
- 190
- Polubienia
- 18
- Ocena
- 5
P
Printablesrackhamb
Anamorphic Lens Mod for Sigma 18-35mm f/1.8
This is a small mod that can be screwed to the back of the Sigma 18-35mm f/1.8 lens that makes the image appear like that of an anamorphic lens, mainly by elongating the bokeh. This effect can be seen pretty clearly in this video by "We…
- Pobrania
- 189
- Polubienia
- 21
- Ocena
- 0
P
PrintablesSam
Sigma ROX GPS 11.0 Aero fixation (50mm version)
50mm Version des tollen Aero Lenkerhalters für Sigma ROX GPS 11.0 von CBiker (https://www.thingiverse.com/thing:2612827). Die Verbreiterung war Notwendig wegen Umstieg auf 48mm Lenkerhalter. Zusätzlich wurde die Lenker-Fixierung leicht…
- Pobrania
- 185
- Polubienia
- 22
- Ocena
- 5
P
PrintablesDa Designer Boi
Sigma/ Troll Face Keychain
Enjoy this Sigma/ Troll Face keychain! You can use it to add a hint of personalisation to your belongings, pin it to your shirt as a badge, gift it to somebody, and many more! Please note: This is an AMS version if you would like to print…
- Pobrania
- 182
- Polubienia
- 18
- Ocena
- 0
P
PrintablesKaisers Wolf
Sony A6400 & Sigma 18-50mm Scan
Dimensionally accurate 3D scan of A6400 & Sigma 18-50mm Some surfaces were unable to be scanned correctly, however overall shape is accurate. Basic mesh repaired model provided, however the repaired surfaces may not be accurate.
- Pobrania
- 182
- Polubienia
- 9
- Ocena
- 5
P
PrintablesEmely
Sigma Aura 60 GoPro Mount
I had problems positioning my Sigma Aura 60 light straight on my handlebars because of space problems. So I came up with the solution of hanging it under my Garmin Edge mount using a GoPro-Adapter. So I designed a holder for my lamp to…
- Pobrania
- 179
- Polubienia
- 11
- Ocena
- 0
P
PrintablesLopatka
Sigma 170-500 Lens Hood
This is a lens hood for the Sigma 170 to 500 telephoto lens. This is the second lens hood I designed for myself, and yes, I'm pretty hard on my cameras and equipment. Most of my glass is Nikon, and it is easy to get replacement parts for…
- Pobrania
- 176
- Polubienia
- 4
- Ocena
- 5
P
PrintablesChristian Englmeier
SIGMA Blaze mount (GoPro-Mount)
Bracket to attach the SIGMA bubble tail light to a GoPro Mount. The advantage of this holder is that the SIGMA Blaze does not need to be modified. The original side "wings" which serve as rubber holders of the original attachment, do not…
- Pobrania
- 173
- Polubienia
- 16
- Ocena
- 5
P
PrintablesEK_3D
SIGMA Bike Computer Mount - NEW VERSION (V2)
Changelog: 2023-03-16: Added new version for handlebar diameter 25.4 mm, as requested (offset 21 and 22 mm). Changelog: 2020-11-24: Added new version with 5.0 mm offset, as requested. And changed file names according to screenshot…
- Pobrania
- 170
- Polubienia
- 24
- Ocena
- 4,67
P
PrintablesSkalex
Sigma Aura Bike Lights Improved Mount
Ever been annoyed by the mount that came with your nice and bright Sigma Aura bicycle lights? You just cannot detach the light from the mount, instead you need to remove the whole mount. When you attach the mount, you have to align the…
- Pobrania
- 167
- Polubienia
- 21
- Ocena
- 5
P
PrintablesDerrickLA
Delta Sigma Theta Christmas Ornament
This is a simple Christmas ornament for the Delta Sigma Theta sorority.
- Pobrania
- 166
- Polubienia
- 15
- Ocena
- 0
P
PrintablesAngelius
Garmin/Sigma Rox 11 Backback mount
After printing, you have to glue all parts together. To attach the mount to the backpack you still need double sided, 10mm wide velcro.
- Pobrania
- 163
- Polubienia
- 19
- Ocena
- 0
P
PrintablesPossum Wagon
Sigma 18-35 Lens Hood
This is a replacement lens hood to fit the Sigma 18-35mm Art lens. The lens is 72mm thread but I use 77mm filters with an adapter. With the adapter it wasn't possible to still use the stock lens hood. I created this hood so that it can…
- Pobrania
- 161
- Polubienia
- 14
- Ocena
- 5
P
PrintablesSeilbahn_Modellbau
model Gondola Leitner 3S sigma cabins
a model of the 3s LEITNER Gondola
- Pobrania
- 156
- Polubienia
- 14
- Ocena
- 0
P
PrintablesAngelius
"e*thirteen Base" Mount for Garmin/Sigma Rox 11
An other mount for my Sigma Rox 11 (Garmin Base). This time for the e*thirteen Base (40mm) Stem . May be usable for other stems too. You need two M3 countersunk screws ... i used my dermel to shorten them.
- Pobrania
- 155
- Polubienia
- 13
- Ocena
- 0
P
PrintablesPrestonmakesstuff
Sigma Keychain
It is a small keychain that i printed at 80% infill and it came out well, attached with a carabiner.
- Pobrania
- 151
- Polubienia
- 10
- Ocena
- 4
P
PrintablesConstantine
36mm Film digitizer for a 72⌀ Sigma lens
A simple design film digitizer I have made in fusion, works great. This design was made for 18-300mm Sigma Macro Lens (No idea if you can fit it on another lens so keep that in mind) Extension tubes are required for being able to focus so…
- Pobrania
- 149
- Polubienia
- 23
- Ocena
- 0
P
PrintablesWaldmops
Lampen halter Gopro Befestigung / Light holder GoPro mount (Sigma Aura100)
Sigma Aura 100 gopro Halterung /Sigma Aura 100 Gorpo mount
- Pobrania
- 140
- Polubienia
- 9
- Ocena
- 5
P
Printables20n
SIGMA Blaze Halterung
Dieses Modell ist eine Halterung für das SIGMA Blaze Fahrradrücklicht mit Bremslichtfunktion. Die Halterung wird mit einem Verschluss an die Sattelrohrschelle befestigt. Das SIGMA Blaze Fahrradrücklicht wird von oben in die Halterung…
- Pobrania
- 139
- Polubienia
- 3
- Ocena
- 0
P
Printables3dprint.pe
BCN3D SIGMA Upgrade to 1.75mm
TRABAJO EN PROCESO Con este upgrade convertimos cualquier SIGMA a filamento de 1.75, usa extrusores Titan y Hotend V6 de E3D Original. Hemos respetado todos los componentes originales de la impresora, los ventiladores, el termistor y el…
- Pobrania
- 138
- Polubienia
- 16
- Ocena
- 0
P
PrintablesToby3D
Sigma Aura 80 to Gopro Quick Release Mount
Remix of: GoPro quick release two-part clip by parkis Sigma Mount Piece by ENKI
- Pobrania
- 136
- Polubienia
- 11
- Ocena
- 5
P
PrintablesErlikhan AVCI
Sigma Profile 20x40 mm
Sigma profile 20x40mm for ur test projects
- Pobrania
- 130
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJohannes
Sigma Bike Computer Halter V2
Better Version of the bike computer holder. You will just need two M3 srews (10-12mm) an two M3 srew nuts. Fits for handlebars with 31.8mm diameter. Just use the original base and screw it to the holder. Printed it with Sunlu PLA+. You…
- Pobrania
- 128
- Polubienia
- 16
- Ocena
- 0
P
PrintablesCTX
Sigma buster 1000 goPro mount adapter
Replacement goPro mount adapter for Sigma Buster 1000 light with a spring lever to optimize longevity
- Pobrania
- 119
- Polubienia
- 4
- Ocena
- 0
P
Printableswalndyn
Sigma 100-400 E-mount Tripod clamp
The original Tripod clamp was just too expensive so my friend and I designed our own 3d printable mount that is as sturdy and rigid as the original one. The hole thing is ArcaSwiss compatible as well. It is made up of 2 parts for better…
- Pobrania
- 118
- Polubienia
- 13
- Ocena
- 5
P
Printablesshokwaav
Sigma DP Merrill LCD Hood
I managed to get a second hand Sigma DP1 and DP2 Merrill for quite cheap, but realised that the LCD was quite useless in bright light. I managed to find a design on thingiverse which did exactly what I wanted, but the design required…
- Pobrania
- 117
- Polubienia
- 9
- Ocena
- 0
P
PrintablesTwo Wheels Online
Sigmund FreudMarker
"Dive into the depths of the mind's paradoxes with our Freudian-inspired bookmark, the FreudMarker. Just as Freud explored the complexities of human behavior, the Freudmarker bridges the gap between surface-level reading and the hidden…
- Pobrania
- 116
- Polubienia
- 9
- Ocena
- 5
P
PrintablesPhototoxin
Age of Sigmar Mysterious Terrain Dice
A dice/marker for indicating which type of Mysterious Terrain each piece is for Age of Sigmar.
- Pobrania
- 114
- Polubienia
- 11
- Ocena
- 0
P
PrintablesCodemer
75mm Spool for D3D Sigma Filament refills
I designed this spool to fit a 75mm D3D Sigma filament refill using minimal filament to make. The slots in the outer spool make it easy to load the filament before cutting its zip ties. The SCAD files are included to provide a starting…
- Pobrania
- 111
- Polubienia
- 7
- Ocena
- 5
P
PrintablesTheAbidingOne
Bike Clip SIGMAR to SELLE ROYAL
Hi, this is a clip to fit the SIGMAR NUGGET II bike light to the SELLE ROYAL ICS sattle system. First print both split parts “right" and "left” (70%infill 3 perimeters) connect the rubber band of the NUGGET II to the clip push the clip…
- Pobrania
- 111
- Polubienia
- 10
- Ocena
- 0
P
Printablesym-29
Square Hood for Sigma 18-50mm Lens
I liked the design of the square hoods for the fuji cameras, so decided to replicate it for the lens I have. I've not seen much vignetting with the lens, but haven't tested it fully so can't guarantee it is vignette free.
- Pobrania
- 111
- Polubienia
- 8
- Ocena
- 0
P
PrintablesZilli341
Reversible lens hood for Sigma 30mm f/1.4 DC DN
I bought the lens second hand and it came without the lens hood, so I designed a replacement. The field of view isn't obstructed at all, and you can still (barely) access the focus ring with the hood reversed. I printed it at 0.2mm with…
- Pobrania
- 110
- Polubienia
- 6
- Ocena
- 5
P
Printablesjefftml
Solar Filter Mount for Sigma 150-600 F5-6.3 DG OS HSM | C
A simple rotate and snap-in solar mount for the Sigma 150-600MM F5-6.3 DG OS HSM | C. This fits in just like a lens hood. Just clip your solar filter on the edge of the mount. Easy print, no supports needed.
- Pobrania
- 109
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDarkMarkZX
Sigma action figure
Super poseable Sigma action figure, armed with removable laser daggers and forehead laser beam! Comes with two sets of hands. His double-jointed knees and elbows allow for a lot of dynamic poses. Stands almost 19 cm tall and scales well…
- Pobrania
- 108
- Polubienia
- 55
- Ocena
- 0
P
Printablestubridy94
Age of Sigmar Battle Box organiser v1
Here is a battle box of my own design which I use to store most of my parts for Age of Sigmar games. The box is a simple stacking system which comprises the following components: A large dice tray which houses the other components. I have…
- Pobrania
- 106
- Polubienia
- 6
- Ocena
- 0
P
PrintablesLopatka
Sigma 10-20mm D DC HSM Lens Hood
After reading an entry on the PrusaPrinters blog about photography, I realized that I can solve a problem I had for a long time. I have had a Sigma 10-20mm lens for many years, but broke my lens hood a long time ago. I could not find a…
- Pobrania
- 104
- Polubienia
- 8
- Ocena
- 0
P
PrintablesSebastian Kan
Sigma Blaze Holder for Fizik Saddle
A Short Holder for the Figma Blaze rear light that fits the Fizik Saddel clip
- Pobrania
- 104
- Polubienia
- 10
- Ocena
- 5
P
Printablesdada
Sigma Blaze Mount
I wanted a rear light for my old MBK Mirage that light up when I go through a tunnel and when I pull the breaks. The Sigma Blaze does it perfectly. You'll find what you need to plug it under the saddle with two serflex. NB : this bicycle…
- Pobrania
- 103
- Polubienia
- 13
- Ocena
- 5
P
PrintablesWermuth3D
Geberit Sigma 70 Plastic part
Makes it easy to flush again when your Geberit Sigma 70 plastic part breaks(and it will!) You can print it however you want, i would recommend PETG but i did not have some myself.
- Pobrania
- 102
- Polubienia
- 3
- Ocena
- 5
P
PrintablesManü
Sigma Bike Computer wall mount
Mount for your Sigma cicycle computer (Rox 12/Rox 11 evo/…) at a vertical surface with 2 srews. Use screws mit a head of 8mm. I am not shure, if its necessary to print it with brindges. I put the g-code data in the attachment with…
- Pobrania
- 96
- Polubienia
- 9
- Ocena
- 5
P
Printablesappallingdonut7
Sigma 85mm Art f/1.4 Lens Hood - LH927-02
Lens hood LH927-02 for the Sigma 85mm f/1.4 Art lens
- Pobrania
- 93
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSmok7kp
3 x 75mm x 42mm movement tray for 9th age/warhammer fantasy battle/age of sigmar/40k unit of three models with 75mmx42mm base
Simple model made in tinkercad, can be resized with some trail and error. Made so i can play some 9th age with me bois after 40k got too anoying. I printed it with some crappy PLA and 0,3mm layer hight, wouldn't invest any more in it.
- Pobrania
- 91
- Polubienia
- 12
- Ocena
- 0
P
PrintablesenragedByte
Kappy 3D Printer Sigmeh Remix
Wanted to share the modified models I'm testing as I build my Kappy 3D printer with others if they would like to try and improve. Files are subject to change over time.
- Pobrania
- 90
- Polubienia
- 19
- Ocena
- 0
P
PrintablesSL165
Sigma Buster 1100 Mount
Print with PETG as its flexible enough for the click mechanism to work and UV resistant. Assemble with M3 bolts. Infill at least 30% and at least 3-4 walls. Supports needed. You may also need to file the mount for allowing the lamp to…
- Pobrania
- 90
- Polubienia
- 6
- Ocena
- 0
P
PrintablesVitaG
Sigma light holder
Holder can be easily adjusted for another accessories or handlebar diameter in Fusion360 Stronger than the original rubber holder. Choose a size 1mm larger than the diameter of the handlebars, insert a rubber pad inside. Connect the joint…
- Pobrania
- 89
- Polubienia
- 4
- Ocena
- 0
P
Printablestto
Twist Stopper for Sigma 150-600 C (and other lenses)
The problem: Attaching the lens to an Arca Swiss Quick Release Plate with a single screw causes the connection to come loose again when carried or used. I chose a 140mm long Arca Swiss Plate for good balancing on a gimbal. This plate has…
- Pobrania
- 88
- Polubienia
- 9
- Ocena
- 4,67
P
Printablesnewthing
Halterung Sigma ROX 4
Print Settings Printer brand: Anycubic Printer: Vyper Supports: Yes Infill: 100% Filament brand: Geetech Filament color: white Filament material: PLA Notes: DAs Infill habe ich aufgrund der Stabilität mit 100% gedruckt. Bestimmt geht aber…
- Pobrania
- 87
- Polubienia
- 2
- Ocena
- 2
P
PrintablesThorsten
Lean Six Sigma Training Catapult
First version of a mini catapult for the design of experiments DOE / Six Sigma trainings. I used M4 screws, nuts and a usual rubber band. Print, test, leave a comment or suggestion and enjoy. https://buymeacoffee.com/thorben
- Pobrania
- 86
- Polubienia
- 7
- Ocena
- 0
P
PrintablesHNCXTech
Warhammer 40K and Age of Sigmar Base Cutter - Customizable
3D-Printable Warhammer Base Cutter for 40k & AoS Models Description: Elevate your Warhammer 40k and Age of Sigmar miniatures with our simple base cutter! Crafted specifically for the unique angled base prevalent in these model ranges,…
- Pobrania
- 84
- Polubienia
- 8
- Ocena
- 0
P
PrintablesAurélien Genin
Sigma 150-600 M100 adapter
This adapter screws on top of the Sigma 150-600 camera lens in place of the lens hood. It gives it a M100x4 male thread. The purpose is to mount filters or masks for astrophotography with this standardized interface allowing to use the…
- Pobrania
- 82
- Polubienia
- 8
- Ocena
- 0
P
PrintablesAlaskan Astro
Solar Film Holder for Sigma 150-600mm C Lens
This is a very simple frame that holds a piece of thin solar film securely. It slips over the plastic lens hood of a Sigma 150-600mm Contemporary lens and should be a good compromise between security and ease of removal for eclipse…
- Pobrania
- 81
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTechNerd
Sigma EF 18-35 Filter Adapter for Mini Matte Box 114mm
Sigma EF 18-35 Filter Adapter for Mini Matte Box I made this 114mm filter adapter to use my Sigma EF 18-35 with the 4x4 square filter holder or compact Mini Mattebox from here: https://www.thingiverse.com/thing:4781627…
- Pobrania
- 80
- Polubienia
- 23
- Ocena
- 0
P
PrintablesKaarel Pärtel
Lens Hood for Sigma 105mm F2.8 Macro EX DG OS
Use matte black filament.
- Pobrania
- 78
- Polubienia
- 4
- Ocena
- 5
P
Printablesstahl999
Garmin / Wahoo / Sigma bikecomputer mount
What is it? I made a mount for mounting bikecomputers like a Garmin,Wahoo or Sigma for example. The second part of the project was to integrate my lights to it aswell. The light adapter was designd for the Sigma Aura 100. I made two…
- Pobrania
- 73
- Polubienia
- 7
- Ocena
- 0
P
PrintablesStanislaw Paul
Sigma Blaze Halter auf Rockbros Satteltasche
Hallo, fahre die Kombination auf meiner Cube Satteltasche mit Beleuchtung und Schutzblech, daher sieht meine Lösung so aus. Ist auch gegen das Rausfallen gesichert .Für Verbesserungen bin ich immer offen. Wer die STL benötigt, kann sie…
- Pobrania
- 72
- Polubienia
- 2
- Ocena
- 0
P
Printablesantlers
Sigma fp right side grip + thumb grip + strap connector
This is a small grip + thumb grip + strap connector designed to fit the right side of the Sigma fp. It's designed to line up with the bottom edge of the screen to continue that shape forward, and extends the existing thumb grip shape…
- Pobrania
- 71
- Polubienia
- 3
- Ocena
- 0
P
Printablesappallingdonut7
Sigma 50mm Art f/1.4 Lens Hood - LH830-02
Lens hood LH830-02 for the original Sigma 50mm f/1.4 Art lens
- Pobrania
- 69
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJohann Trömer
Sigma 18-125 lens hood Mattebox
Sigmar 18-125 lens hood like eng/efp camera Print Settings Rafts: No Supports: No Infill: 80% Category: 3D Printing
- Pobrania
- 67
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTomaskutta
Sigma computer holder with GoPro bike mount
Parts: stainless steel nut M4, screw M4x12, cap nut M5. The nut must be inserted during printing. If you printed two parts separately like me, then you stuck it together. Print Settings Printer Brand: Prusa Printer: I3 MK3S Category:…
- Pobrania
- 66
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSedak
| SIGMA | BC 14.16 STS stem cap mount
| BASIC DESCRIPTION | this is an adapter for cyclocomputer SIGMA BC 14.16 STS - maybe it works on some other models, but I have tested only this one I made it so that I can have my cyclocomputer in the middle of my bike it is made so that…
- Pobrania
- 65
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBady
Sigma SD10 / all camera hotshoe cover
Simple hotshoe. Holds firmly but can be easily removed. Mostly modeled on the Sigma SD10, but it should be universal.
- Pobrania
- 61
- Polubienia
- 4
- Ocena
- 5
P
Printablesaveluru
Sigma 100-400 Arca Low Profile Collar
Low Profile Arca Swiss compatible lens collar for Sigma 100-400 DG DN E Mount Uses two 6/32 x 1" Countersunk Stainless steel screws to clamp together around the lens. print it with 4 or 5 walls to ensure that the collar part is capable of…
- Pobrania
- 61
- Polubienia
- 6
- Ocena
- 0
P
PrintablesEistee
Adapter Sigma Blaze (2024 Version) for Thule Chariot bicycle trailer Fahrradanhänger
Adapter for the Sigma backlight for a Thule chariot trailer.
- Pobrania
- 60
- Polubienia
- 8
- Ocena
- 0
P
PrintablesBady
Sigma SD10 / all camera hotshoe lens cap holder (67mm)
It's designed for a 67mm cap, since I don't have another lens, so I haven't tried other designs, but remixing remains enabled, so you can edit it if you like.
- Pobrania
- 59
- Polubienia
- 19
- Ocena
- 5
P
PrintablesFrancois Jacques
AOS Age of Sigmar 4th edition D6 score tracker
This was commissioned by a friend for him to have a score board that uses D6s for his Age of Sigmar 4th edition games. I printed all of it in 0.2mm. You'll need to print Base Plate once, and Insert Plate twice. You'll want to slice them…
- Pobrania
- 59
- Polubienia
- 8
- Ocena
- 0
P
Printablesimaya
Sigma DP1 Lens Cap
A basic lens cap for the Sigma DP1 point & shoot. Clicks into the bayonet on the front when the lens is retracted to keep dust & etc off/out of the lens when stored. Do NOT power on camera with cap installed, I haven't personally tried so…
- Pobrania
- 58
- Polubienia
- 2
- Ocena
- 0
P
Printablesb3n3d1k7
Bike Headlight Mount (Sigma Lightster)
Update 2023-03-18: After several years of use my adapter printed in PLA split near the bolt, so it was time to print a new one. While slicing the model I thought it would be nice to be able to print it without support. So I updated the…
- Pobrania
- 57
- Polubienia
- 3
- Ocena
- 5
P
PrintablesPhantom Dragon
Sorry Ladies I'm Too Sigma Keychain (S.L.I.T.S. Keychain)
if girls ask you out and your not interested show this to them to politely decline.
- Pobrania
- 56
- Polubienia
- 6
- Ocena
- 0
P
PrintablesTomek
Sigma key chain
For all Young Fellows, who wants to be cool & trendy. Here is a key chain with Sigma sign - the Youth Word of the Year 2024. Chose modern or classic style. Print flat. Optionally change colors after 2 mm.
- Pobrania
- 56
- Polubienia
- 8
- Ocena
- 5
P
Printableskrab
Sigma BC-906 battery cover
If you lost u can print. Easy xD
- Pobrania
- 56
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFIREMANIA
Sigma Coin
Coin with sigma on one side and rizz on the other.
- Pobrania
- 56
- Polubienia
- 4
- Ocena
- 0
P
Printablessebra
Lens hood for Sigma UC Zoom 70-210mm 1:4-5,6
I scaled down Lopatka's original model to fit my old Sigma UC Zoom 70-210mm 1:4-5,6 lens with Canon EF bayonet. I couldn't find any info about what kind of hood fits this older lens. I've seen a few different variations of this 70-210mm…
- Pobrania
- 55
- Polubienia
- 0
- Ocena
- 0