Liczymy pasujące modele…
Hi everyone, I designed a simple walkie-talkie which can be resizable and support-free . You can see that the model in the cover photo is smaller than the original size. I printed it by adjusting the size scale by 60%. Have fun!
Basically the shoe organizer by JGR completely remodeled in FreeCAD that is now Wall mountable an resizable by entering your EU shoe size into the FreeCAD Spreadsheet.
Hi everyone, I have designed an alternative model for your test prints. The model you see in the cover photo is not printed in its original size, but in 115% size with 0.4mm nozzle and 0.2mm layer height. You can re-scale the model but i…
Hi everyone, As my last design, again I tried to design something easy to print and now its floats. Enjoy!
Hi everyone, I made this model for dioramas or decor. When you print in original size, the hinge details may not be there. As you can see in the cover picture, I printed the product and printed it with a sizing setting of %170 with 0.4…
This is a simple cable clamp for mounting cables to surfaces. The screw hole has a diameter of 5mm, and the cable hole has a diameter of 10mm. This design is resizable, so only one file has been supplied (Though, I can create more sizes…
A collection of 10 different Easter bunny patterns designed as a versatile 3D model set. Each bunny features a unique pattern, giving you a variety of decorative options for Easter-themed projects. The designs are fully scalable , making…
IMPORTANT! For best spinning, make sure that when you insert the ring into the bottom of the casing, make sure that the part of the ring that was touching the bed is facing up! A simple 3 part fidget ring. It has a nice grippy knurled…
Label your cables: A B X Y Z 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Colorify and resize them according to your needs (sorry as a set_ I didn't upload each label seperataly). Default size is 8mm out-to-out (suitable for 4mm cables). No…
I wanted to design a box in the exact size of my stickers. Scaled to 120% it perfectly fits 110 switches or a keycap set
This clip can be screwed to a wall and locks cables precisely. The parametric FreeCad file enables you to print this clip for any number of cables you want. Included are ready to print files for 3 and 5 cables. Petg, 30% infill.
Generic GPU support to prevent sag without attaching to anything specific. Works best in a PC case with a power supply “basement” PLA has held up just fine for this and it prints faster lying down than standing up. The model is meant to…
Works perfectly on Trident 300 and above You can put 2 spools, one on each side. In theory, Trident 300 can be used with 4 spools inside. I haven't checked the 250 size, but it would probably work. The difference between 250, 300, and 350…
Threaded brick textured container & lid Print Settings Printer brand: Anycubic Printer: Anycubic Kobra v2 pro Rafts: No Supports: No Resolution: .12mm Infill: 20 Filament brand: Anycubic / prusament Filament color: White Filament…
Found the design and modified it for my use. I added a small socket to print it upright. With my parameters, the dartcup fits immediately i a 10mm aluminium tube. All you need is a steel needle. Got mine from ASMC, but they don't have…
Made this model for the size i needed it but you can easily resize it to your needs in your slicer 50% infill 0.1mm layer Hight 0.2mm nozzle (or your preference)
Just a simple buckle, so you can replace it when it breaks… All filaments work, even PLA. I print it with 100 percent infill. resizable in XYZ Hope you like it…
Prints as is in the STL without supports. Resize X size to the desired width in the slicer. One DIN module is 18 mm wide. I recommend printing this in flame retardant filament suitable for this type of use.
Customizable smooth running Thrust Bearing. Parametric Change .. Mount type, diameter, thickness, ball diameter. # of balls, etc Generates a ball retainer and internal raceway Very smooth operation. Use BB's, marbles, whatever.
This frame was originally designed for my home lab rack that fits into one of those "four cube tables". The STL files attached are multiple sizes to accommodate any size cube that you may need. I printed this in basic PLA and the…
The furniture under the sink is quite toll but it doesn't have any shelf. I saw something on amazon that could be used in nearly all furniture, something like this: link example link . I said that I could do something similar so I…
A simple, low-material handle designed for cardboard boxes. Lightweight and easy to print, with a parametric file included so you can customize the dimensions to fit your needs. Perfect for quick, efficient prints!
This is a coffee dripper holder for HARIO V60 glass dripper. The specialty of this holder is: -The locking nail tightly hold the neck of the V60 dripper. -The rim of the plate hooks glasses or pots lightly. -The diameter of the plate is…
This is a stand for Eufy Security Solo IndoorCam P24 and S220. It will raise your camera 200mm (8"). It is design to be printed without supports. You can make it any height less than 200mm by lowering the part into the build plate as…
After throwing pots, I cover them with plastic to slow down the drying process. Far too often, I end up deforming the rim of the pot with the plastic. I designed this frame to sit over my pots and protect them. Print 4 of them and then…
EN: Cable clip for various use. Just change variables for cable/screw diameter and model chage it's size. CZ: Klip na kabel pro různé použití. V projektu stačí změnit průměr kabelu/šroubu a model upraví svoji velikost.
This SCAD file allows you to create a box for drawers as big as your printbed and you can choose the number of columns and rows for the drawers. You can change also how deep your drawers are. The limit is only the size of your printer. Or…
This is a simple but powerful parametric box model created in Onshape and optimized for 3D printing. You can quickly customize the dimensions by editing a few variables: Box Length Box Width Box Height 🧱 Wall Thickness Filet Radius The…
Create a stand custom stand for your device! A Tablet or Phone stand that automatically resizes to suit your device dimensions. Cable routing for wired charging is built in. To resize the stand: - Download the .f3d file -Open Fusion 360 &…
Do you have far too many takeaway boxes to use for storage? Do you wish there was a way to keep them neatly organised in your cupboard? Well now there is! Live your life to the full* with Resizable Takeaway Storage Organiser 2000 , your…
A simple watch stand inspired by the ones that come with some watches, fits both bracelet and strap watches big and small. The holder has a D shape with a cutout for better fit and a bit of flex when putting a watch on or off. Has a…
The 3D model represents a versatile plastic vacuum cleaner nozzle designed for efficient debris collection, with customizable features to fit a wide range of vacuum cleaner models. The nozzle's design allows for easy scaling and resizing…
HAS NOT BEEN TESTED YET!!!!
A parametric, modular desk organisation system. Use the configuration tool in Fusion 360 to resize all components at once to fit to your workspace. Design your own modules using the template provided. This system uses 2 8*2mm magnets…
I used the beautiful birth control pill box model by Skipperino, and made it fit for the brand of my gf. I also added the heart, I used the simple 3D heart model by Best_codes. The original was suitable for pill blisters with a width of…
This is a corner guard designed for an island or table. The model is set for 1.5" depth. But it can be scaled for any size of table. It is simple to scale for other depths. Here is a quick table with examples but keep in mind you can…
A customisable shoe rack made from 20mm wooden dowels, can be made as many layers or adjustable height for odd sized spaces. cheap simple and sturdy.…
This mount is sizedto hold the Caldigit TS3 laptop dock and has a crossbar and a slight lip to ensure that your laptop dock fits snugly in place for connecting/disconnecting cables. It leaves the front and back of the dock exposed and…
This is a towel hanger (Circle) If You want square version click this https://www.thingiverse.com/thing:4966229 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 38 Filament: PolyMaker…
Its a vertical stand for a Qnap Hub, but i think its easy resizable to size u need and so it can fit for any kind of Boxes. Originlay it is 35mm wide in the middle and 89mm long. -a little bit Support needed
A configurable bin insert for Pokemon tins with built-in Digital Dice and Coin Flip. The organizer can hold card decks w/ sleeves and has a drawer for game markers. Attribution: Drawer and Card slots were inspired by RonkerRoom's Pokemon…
A clean, lightweight funnel designed for precision pouring rather than maximum flow rate. The narrow spout and circular geometry naturally act as a partial seal, giving you more control over flow rate when needed. Made originally as a…
Neatly stack your tape on your desk! 100% scale fits rolls of tape with 26mm hole, 40mm high. Like this design? Connect with Karen! Follow her on her own Printables profile: https://www.printables.com/@karenchaudes_1113022 See her designs…
You can resize with OpenSCAD. https://openscad.org https://github.com/landroo/OpenSCAD
These drawings are not parametric, but can be sized in the parameters of Freecad. The thread for the cap is custom, and I could not ever get it to parametrically scale (if you change the container dimensions, you will have to monkey with…
A bathroom shelf fitting for the hansgrohe® wallstoris® series. The original ones are only available in two sizes and also do not feature a large water drain at the bottom, which helps keep it clean. I printed this one black PETG on an…
This is a towel holder (square) If you want circle version Click this https://www.thingiverse.com/thing:4966231 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 38 Filament: PolyMaker…
This is a tape dispenser, written in OpenSCAD. For masking tapes, mending tapes, scotch tapes, and so on, that have 26mm of inner diameter of paper core. Features: - Simple design: It is simple, only core holder and cutter part. -…
You can resize with OpenSCAD. https://openscad.org https://github.com/landroo/OpenSCAD
A diya (oil lamp) cookie cutter for Diwali – for nankhatai, shortbread, sugar cookies and fondant toppers. About 90 mm across, with a sturdy join between the flame and the lamp so the flame stays on when you lift and bake the cookie. Make…
I made this cup to be resizable in the slicer
Design Concept My idea is to make this on a larger scale so you can hang it on the wall. Work in progress!
funnel is elavated by grips to let displaced air escape, default diameter is 30mm
I needed a new spacer for my picture frame, and could not find any models for it yet. Made this very simple one to fit my frame for 5mm space, but it should be resizable to your needs! I would advise to print it in flexible material such…
My fiancé wanted something to put her green onions so I made a green onion! The vase in the photo was printed in Sunlu PLA+ white and green. Spiral Contour: Enabled Layer Height: 0.2 mm Wall Width: 0.80 mm Resizable: Yes
A chess set that is sizable and printed with other filaments. Now I've only done with PLA but hope you guya will have fun with these pieces. If you can give me feedback, that will be great.
I was in need of a painter's pyramid. This model can be printed in various sizes to meet your requirements. Print with 4 wall loops at 25% infill with tree supports so that the interior will print well. I modeled this to be stackable! Let…
This is a coffee dripper holder for HARIO V60NEO dripper. The specialty of this holder is: -The locking nail tightly hold the neck of the V60NEO dripper. -The rim of the plate hooks glasses or pots lightly. -The diameter of the plate is…
this i a model to show you that you like yourself
The model is a 100-mm-diameter lazy susan turntable with a swappable bore hub - just lift a bore out and push another in. It's designed to allow a 3D printer to draw filament when the spool is rotating around a vertical axis. It's useful…
This is a sizable cable clip. You can size it however you need in your software. It easily screws into your desk. Print Settings: Supports: Yes, on the overhang. Infill: 15% or higher. Materials: Any hard.
Universal resizable USB cable clip, check the diameter of your cable and resize in the slicer
I have designed this Vape Bed support with USB hole for my wife. It is compatible with Vaporesso Xross2 but i think can be optimized for most POD VAPES, because the base is detachable and dimensions are pretty editable for your needs…
Simply select top walls: 0 and hit print. You can print with no wall loops and put it in the shell or you can have it free-standing, play around with patterns and infill percentages! Please upload your makes to give other people ideas!
I printed this model with Sunlu dual color blue green, you can print both objects on 1 plate or on seperate plates. I recommend printing it with 3 walls and 15% hexagon infill. I used tree supports for the lid (to support the small rim).…
If you are using this piece as a fill for a button, I would recommend not gluing it, and putting the hexagonal side down so it is easier to get out in the future.
I needed a stand that would fit the IKEA Lanespelare Monitor Stand. The width depends on the base of my monitor, the depth depends on the Lanespelare and its distance from the wall, and the height depends on my desk. The goal was to…
This is a resizable vented shade cover - all done in the slicer. Want a shorter wall? Want different X and y dimension? Just turn off scaling and resize it. The flutes make the walls print straight, and the holes in the bottom are all set…
This is a sizable cable clip. You can size it however you need in your software. It easily screws into your desk. Print Settings: Supports: Yes, on the overhang. Infill: 15% or higher. Materials: Any hard.
This mount is sizedto hold the Caldigit TS3 laptop dock and has a crossbar and a slight lip to ensure that your laptop dock fits snugly in place for connecting/disconnecting cables. It leaves the front and back of the dock exposed and…
This is a corner guard designed for an island or table. The model is set for 1.5" depth. But it can be scaled for any size of table. It is simple to scale for other depths. Here is a quick table with examples but keep in mind you can…
I needed a stand that would fit the IKEA Lanespelare Monitor Stand. The width depends on the base of my monitor, the depth depends on the Lanespelare and its distance from the wall, and the height depends on my desk. The goal was to…
Universal resizable USB cable clip, check the diameter of your cable and resize in the slicer
Prints as is in the STL without supports. Resize X size to the desired width in the slicer. One DIN module is 18 mm wide. I recommend printing this in flame retardant filament suitable for this type of use.
This is a resizable vented shade cover - all done in the slicer. Want a shorter wall? Want different X and y dimension? Just turn off scaling and resize it. The flutes make the walls print straight, and the holes in the bottom are all set…
lite box to organise the drawers in my kitchen. I made it 3-parts (2 x side / 1 x center) which connect so one can resize the box to various kitchen drawers. The drawer in the picture is a 60cm drawer. The box is 50mm high and 100mm deep.
