P
Printables
Speedybee Mario 5 front XT60
replacement for the stock GoPro mount to mount a XT60 socket
Wyniki wyszukiwania: speedy
Liczymy pasujące modele…
P
Printables
Speedybee TX800 Mount with ELRS receiver cradle
Tanq-S conversion to analog with cradle for an ELRS receiver module with enough space to route cables and antenna.
P
Printables
Speedybee Mario fold 8 - TF-Luna LIDAR Holder
Install a rangefinder in the SpeedyBee Mario Fold 8 for accurate altitude measurement. The model is designed to mount the TF-Luna lidar longitudinally to the frame, utilizing the existing mounting holes that are spaced 25mm apart. It is…
P
Printables
Volantex Phoenix SpeedyBee F405 Wing Mini FC Top Plate & Wobbly Wing Fix
This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…
P
Printables
SpeedyBee Mario5 GPS O3/O4
GPS mount for the GEPRC M10 module, designed to fit the popular SpeedyBee Mario 5 frame. The mount retains compat With the release of the new DJI O4 Pro Unit, a new mount for two antennas has been developed. Each antenna is secured using…
P
Printables
Speedybee Mario 5 led strip mount
Speedybee Mario 5 led strip mount, you need to cut a bit of the sides of the led strip
P
Printables
SpeedyEFI Speeduino Mount for Datsun 620
This will replace the end caps, spacer, and create a mounting point that uses existing holes where kick panels go on a Datsun 620. I plan to mount on the right side (passenger side in the US and left-hand-drive countries), but I believe…
P
Printables
SpeedyBee Maser 5 v2 - Mateksys M10Q-5883 GPS Compass Mount Top (20x20 mm)
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. Instead of mounting the module to the drone's rear, the mount moves it to the front. The main purpose is to get…
P
Printables
SpeedyBee Maser 5 v2 - GPS Mount Spacer
Purpose This spacer allows the original GPS mounting spot on the Speedybee Master 5 v2 RC drone to be filled. Hardware TPU or similar FLEX For printing the mount. Original screws To fasten the spacer.
P
Printables
SpeedyBee Maser 5 v2 - Mateksys M10Q-5883 GPS Compass Mount Rear (20x20 mm)
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. It mounts the module to the drone's rear. Special care was taken to design the mount such that the module sits…
P
Printables
DJI o4 Air unit - Speedybee Bee25 -VTX mounting parts
By default the Bee25 does not have a way to mount the o4 air unit which is why I made these case and camera adapter pieces for. The camera adapters utilize the default DJI provided camera cover + screws. Additionally the adapter provides…
P
Printables
Atomrc Dolphin - Speedybee Wing Mini
I made a mount for the Speedybee wing mini flight controller for the AtomRC Dolphin base to fit the "AtomRC Dolphin Base Plate For SpeedyBee F405 Wing" ( https://www.thingiverse.com/thing:6070334 ). Not a remix, but I figured it be easier…
P
Printables
DJI O4 Pro Soft-Mount for SpeedyBee Mario5
Soft TPU camera mount for DJI O4 Pro in the SpeedyBee Mario5 frame. Keeps the stock-style mounting, but adds clearance so the M2 camera screws don’t touch the aluminum side plates , reducing vibration transfer into the camera. Note: you…
P
Printables
WKMU V1 | Speedy Klipper MMU | PLA TPU PETg | 20 second reloads | built for voron/eva2.4 toolhead
Overview: First of all, feel free to ask questions and leave sugestions what to add to the MMU/instructions. I built WKMU based on the working principles of AMS Lite (Didn't know that at the time). It uses 4 secondary stage extruders that…
P
Printables
Speedy Gears!
This is basically a system of gears, which maybe increases the speed of the last gear! The printer is advised to print at least 4 gears, attach the gears into the two rods kinda things and then attach the handle and rotate! Yay, it's…
P
Printables
lipo protector with vifly mini finder for speedybee mario 5
protection lipo pour speedybee mario 5 avec support pour vifly mini finder integrée et acces facile au bouton. En impression TPU
P
Printables
SpeedyBee F405 wing FC Case
This is a box-shaped case for using the speedybee f405wing FC on a fixed wing.
P
Printables
Speedybee Mario 5 Dual Antenna GPS WS-M181 XT60
Hey FPV Guys, it's a ugly quick'n'dirty combination of different Things. For the Speedybee Mario5 Frame: - WS Dual Antenna - XT60 Mountable Plug Connector - WS M181 GPS Print with TPU Infill 15% and Organic support
P
Printables
DJI Action 3 Mount for Speedybee Mario 5
DJI Action 3 Mount for Speedybee Mario 5 Features: Cutouts for the front screen and QS (QuickSwitch) button Shock-absorbing structure Note: Model has yet to be tested Print Settings Printer: Creality Ender 3 Filament material: TPU Layer…
P
Printables
Speedybee F405 Wing Mini Mount
I wanted a light and compact way to mount the SpeedyBee F405 Wing Mini flight controller on my arrow shaft Slowstick bi-plane. There are two different orientations you can assemble the flight controller, standard and custom. Depending on…
P
Printables
SpeedyBee Bee35 Bottom Cover Plate
A simple bottom cover plate for the SpeedyBee Bee35 drone. This drone / frame comes with a CNC-cut aluminum bottom cover plate specifically designed for DJI O3 or similar-sized VTX modules. However, I was using it with an analog VTX…
P
Printables
F405 wing support+gps Speedybee
I used PETG, 15 % infill, 0.2 Quality Standard. M3 + nuts. Print with support. F405 and GPS were getting hot, so I left holes and space for air to flow. 4 x M3x8 + nuts 2 x M3x8 + nuts
P
Printables
SpeedyBee Mario 5 Finne / GoPro
Eine harte sowie weiche Finne für den Mario 5. Zudem eine GoPro Halterung die Glatt und flach ist.
P
Printables
SpeedyBee Mario 5 GPS Mount for 15x15mm GPS module such as HGLRC M100 MINI
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 15x15 mm HGLRC M100-MINI GPS module on a SpeedyBee Mario 5 frame.
P
Printables
SpeedyBee F405 Wing mount (slim remix)
SpeedyBee F405 Wing mount with reduced base size to fit smaller models.
P
Printables
SpeedyBee Mario 8 - DJI O3 antenna holder
DJI antenna holder for SpeedyBee Mario 8 fpv drone
P
Printables
SpeedyBee Bee35 compatible GPS mount for WS-M181 GPS
My SpeedyBee Bee35 came with a GPS mount TPU part for a smaller (I think 121) GPS module. I needed something slightly bigger, that also fits the specific connector geometry of the Walksnail WS-M181 GPS and compass module. In addition, I…
P
Printables
Speedybee TX800 ultimate accessory pack
Accessory kit for the Speedybee TX800 VTX. Print in TPU. Bottom print allows for a comfy softmount preventing damages on repetitive crashes, Top print fits any receiver with one or two ziptie to secure it in place. Hardware required :…
P
Printables
SpeedyBee Mario 5 DC TOF400C lidar mount
Piece to mount tof400c lidar below VTX in SpeedyBee Mario 5 DC frame. Lidar pointing down through hexagonal cut-out
P
Printables
Speedybee Mario 5 gps mount Foxeer M10Q-180 and Flywoo GM10 mini V3 with compass
Speedybee Mario 5 gps mount Foxeer M10Q-180 and Flywoo GM10 mini V3 with compass
P
Printables
GEPRC Mark2 5" - GPS Speedybee TX800 Mount
Holder for SpeedyBee TX800 GPS in GEPRRC Mark2 5" Please use TPU 95A or above Category: R/C Vehicles
P
Printables
Speedybee Mario 5 side protectors
Side protectors designed to work with the SpeedyBee Mario 5 XH frame. Only tested with the XH frame, may also work with deadcat frame.
P
Printables
SpeedyBee F405 Wing Mini Bottom Plate
This model is a flat plate with holes and cutouts so that it can replace the bottom PCB board of the SpeedyBee F405 Wing Mini flight controller. It has larger holes away from the footprint of the FC that enable the assembly to be screwed…
P
Printables
SpeedyBee Bee35 Matek Lidar holder
Print in TPU with organic supports and with little infil. Fits original screws. A little piece of 3M tape can be put to prevent Matek board from moving.
P
Printables
SpeedyBee f405 Wing 30x30 Mounting Adapter
2 Parts Mounting Adpater for F405Wing Print in PLA - PETG Quick to print - I used 25% Infill Hardware Needed 2 M3 <20mm Screws 4 M3 Nuts 4 M2 ~4/6mm Screws ~ 10g of PLA
P
Printables
SpeedyBee Master 5 V2 , Dirt protection
These covers prevent dirt from entering the frame and at the same time ensure good ventilation. Very easy to fit, the two front parts snap into place automatically, the rear part is clamped onto a strut and fastened from below with a…
P
Printables
Speedybee TX800 Mount with ELRS receiver cradle
Tanq-S conversion to analog with cradle for an ELRS receiver module with enough space to route cables and antenna.
P
Printables
Speedybee Master 5 V2 DJI O3 Air unit VTX antenna + RX support
Remixed to add a 900mhz antenna under VTX antenna.
P
Printables
Speedybee Mario Fold 8 VTX antenna mount (Dual)
Hardware: UFL to SMA adapter required. Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: TPU NOTE: If you want a Folding Dual Antenna mount, I've…
P
Printables
Extended GPS mount - Speedybee Mario Fold 8
For quicker GPS fix and to get the compass in Inav to work reliably. Compatibility: GPS size 25x25mm - Used with Flywoo GM10 PRO V3 GPS, and BZGNSS BZ-251 GPS (Original Mario Fold GPS) Support my work: All of my models are available for…
P
Printables
SpeedyBee Mario5 Low Profile 18x18mm GPS mount
Orientation of the Walksnail M181 will be CW0FLIP in betaflight for correct compass orientation. Make sure to follow Betaflight's magnetometer calibration before flight to ensure GPS is set up properly. No extension: Won't have the extra…
P
Printables
Speedybee Mario fold 8 - TF-Luna LIDAR Holder
Install a rangefinder in the SpeedyBee Mario Fold 8 for accurate altitude measurement. The model is designed to mount the TF-Luna lidar longitudinally to the frame, utilizing the existing mounting holes that are spaced 25mm apart. It is…
P
Printables
Speedy Bee Mario 5 alternative capacitor mount.
The original capacitor mount on the Mario 5 (slung under the flight stack) does not fit a Panasonic LM and is prone to causing the capacitor leads to short out against the carbon midplate. This model will sit at the front of the drone…
P
Printables
SpeedyBee Analog module holder for Walksnail Goggles X
Just like the title its a SpeedyBee Analog module holder for Walksnail Goggles X. I made it to hold the analog module and the Extension board . Then I used Nils @ Printables base…
P
Printables
SpeedyBee Mario 5 Gopro 2024 Mount Remix
Hey FPV Friends, here comes my GoPro Hero Mount of the original Speedybee mounting and the skyliner mounting from Mark Wingfield. the angle is 20° i also upload my .f3d file for you can edit what you want. The GoPro 2024 is with his 93g…
P
Printables
SpeedyBee Mario5 O4 Antenna Mount
Hey guys, I just recieved my DJI O4 Air Unit Pro. I printed out the MARIO5-TPU-XT60_DJI_2 from Speedybee ( https://www.speedybee.com/mario-5-frame-download/ ) but the antennas were a little loose. So i designed these to give the antennas…
P
Printables
Volantex Phoenix SpeedyBee F405 Wing Mini FC Top Plate & Wobbly Wing Fix
This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…
P
Printables
Speedybee Mario5 DJI O4 adjustable Mount
Hey guys, I just recieved my DJI O4 Air Unit Pro. Unfortunately Speedybee hasnt released 3D Printing files for a O4 Mount and you also cant buy a mount. So i designed this. Theres no support for the air intakes but the stack side plates…
P
Printables
ViFly Mount and TPU Button for SpeedyBee Mario5 Frame
This is a housing to hold the ViFly Beacon on the Mario5 Frame. It uses a TPU Button to press the button on the ViFly Beacon from the bottom of the frame. I have only tested this with an HD Zero Camera. Other systems/cameras may not fit.…
P
Printables
SpeedyBee Specific Receiver Module V1
Love the existing design of the analog module case because I also use the digital patch antenna. The model is awesome but had some fitment issues with my SpeedyBee analog receiver. I ended up just making some slight adjustments to better…
P
Printables
SpeedyBee Mario Fold8 mount for caddx GM2
This is set of elements to replace front ALU part and mount caddx GM2 gimbal. For the mod You need: M2x10 screw 2pcs (or M1.4x6 if do not want to drill out threads to 2mm dia) 4 silicone dampers - dimensions as shown on pictures -…
P
Printables
Speedybee Bee25 DJI O4 Pro Mount
Bee25 mount for the DJI O4 Air Unit Pro I created two versions, v1 has “Zip Tie” antenna mounts - was trying to make a friction fit for the antenna but still requires a zip tie. Use this model if you don't want to take the o4's bottom…
P
Printables
Creality K1 Speedy Decal
Creality K1 Speedy 3D Printer decal to showcase the 600mm/s speed in generates. Comes with a hozzle and fire shown on the right to represent how fast it goes. Use thin, double-sided tape if you’re mounting it directly onto your printer…
P
Printables
SpeedyBee F405 Wing Mount
3D printable mount for a SpeedyBee F405 Wing Mount. Also includes optional top mount for M100 GPS module. Required: M3 Inserts 5mm diameter M3 Screws. ~5mm without GPS and ~10mm with GPS mount.
P
Printables
Speedybee BEE35 DJI O4 VTX Mounting Plate
The Speedybee Bee35 frame comes with two options for the underside, where you mount the VTX - a single carbon fiber plate (basic version), or an aluminium CNC (Pro version). Neither fits the DJI O4 Air Pro properly unfortunately, because…
P
Printables
SpeedyBee Analog Module Mount for Walksnail Googles X
The original walksnail module has to be removed from the case and inserted in the 3D printed part. the back plate is screwed with long thing screws, I believe I used M1.6x15. Better with self tapped screws since they are just going into…
P
Printables
FPV Battery Holder (for CNHL Speedy Pizza v2 4S/600mAh)
This is a simple FPV drone battery holder/case. It keeps up to 3 batteries securely together while covering the battery connectors. Battery model: ChinaHobbyLine Speedy Pizza v2 120C 4S 600mAh LiPo The batteries are held in place by…
P
Printables
SpeedyBee Mario 5 DC XT60 + Avatar Moonlight antennas
Piece to mount XT60 and two moonlight unit antennas. You just need 2 zipties to mount the antenna. Print in TPU, walls count and infill density really deopends on Your material and how hard part You want. I use TPU varioshore at high…
P
Printables
Speedy Mini Truck
I designed this Speedy Mini Truck as a fun little toy car for 3D printing. It’s simple, easy to print, and great for all ages! 🚗💨 I’m a beginner designer, so if you like my model, please support me with a like—it really helps me keep…
P
Printables
GPS FPV for Speedybee Mario 5 and GEPRC GEP-M10 and DJI o3 unit
A GPS mount for the Speedybee Mario 5 frame and the GEPRC GEP-M10 GPS and the DJI O3 unit. It is best printed with PLA or PETG and you should have plastic glue to glue the two halves together, it should also be printed with support
P
Printables
VIFLY Finder V2 FPV Racing Drone SpeedyBee Mario5
Vifly Finder V2 FPV Racing Drone, to put on the front, just after the camera, can be secured with two screws.
P
Printables
GPS Horns SpeedyBee Mario5 Protection Case Cover TPU
GPS Horns SpeedyBee Mario5 Protection Case Cover TPU
P
Printables
super speedy benchy
this is a 2 wheeled benchy with a turbofan attached to the back be aware that it does not move forward or in any direction it is purely just a statue
P
Printables
SpeedyBee Bee35 DJI Air 04 Mount
The original VTX mount for the SpeedyBee Bee35 only supports the DJI Air 03 unit. The new 04 unit is slightly bigger and has a different location for the USB port. This design is based on the original CNC machined mount but modified to…
P
Printables
SPEEDYBEE MARIO 5 SIDE PROTECTIONS (For O3 Pro version)
Side shield to protect your FC. Only suitable for the pro version with the O3 aluminum fairing Printed in TPU small with supports Infill 100%
P
Printables
SpeedyBee Mario 8 Fold Custom Parts
Newly designed 3d custom parts to fit Mario 8 Fold by SpeedyBee. Side plate (mirror it in slicer for other side print upside down with snug support). Landing skids (just print 4 with 100% infill). Antenna array for 2x SMA connector and…
P
Printables
SpeedyBee Receiver 5.8GHz Adapter for Skyzone 04X Pro Modular Bay
SpeedyBee Receiver 5.8GHz Adapter for Skyzone 04X Pro Modular Bay This is a custom-designed adapter that allows you to mount the SpeedyBee Receiver 5.8GHz into the standard modular bay of Skyzone 04X Pro goggles . It ensures a secure fit…
P
Printables
Speedy Cable Clip With Mounting Hole
Print Settings 0.2mm layers ~3 min print time No skirt The default internal diameter is ~2cm
P
Printables
Skyzone Cobra X SpeedyBee Cover
This cover is designed to fit the Cobra X goggles to cover a SpeedyBee receiver. I printed PLA at 20% infill. I'm sure it would work with other filaments as well.
P
Printables
speedy bee master 5 v2 04 antenna mount
use tpu for everything with fpv drones make sure you are printing slow with supports
P
Printables
SpeedyBee F405WingApp Case
Speedy Bee F405WingApp Case with built in BZ-251 gps module holder. Print the gps holder out of tpu. The rest can be out of whatever you like. You will need 8 m3x4 and 4 m3x6. It requires to xt60 connectors with the grey wire covers on…
P
Printables
Speedybee Master 5 V2 Side plate for F405 V4 with USB-recess
Just mirror the construction if you have the usb placed on the right side instead of left side. I print mine in yellow PETG.
P
Printables
Speedybee Master 5 V2 12,5mm capacitor holder
Stock is too small for a 12,5mm capacitor with 35V 1000uF. I cant draw in cad but i added modifiers to fill holes and make new, cut away little so I could fit a 50V 1000uF instead.
P
Printables
Speedy Bot
After months of work on this project, I decided to share it so that more people can access the material and contribute with improvements and adaptations based on this chassis. The Ligeirinho (Speedy) is a two-wheel differential robot…
P
Printables
SpeedyBee Bee35 DJI 04 Air Unit Pro Camera Mount
UPDATE 4/29 - Test footage using this mount UPDATE - I have released a V2 version of the mount which features TPU vibration dampening. It is now a single unit adding strength and more protection to the camera. V1 - This enables you to…
P
Printables
SpeedyBee Mario5 XT60 TPU DJI with Antenna Protection
Mario 5 XT60 TPU DJI antenna holder to have a protection of the antenna itself to prevent bends when crashing.
P
Printables
Support BackPack SpeedyBee Master 5 V1 Airsoft Phen X Frame
Support BackPack SpeedyBee Master 5 V1 Airsoft Phen X Frame
P
Printables
SpeedyBee Bee35 front XT60E-M mount
SpeedyBee Bee35 front XT60E-M mount. Remove 2 nuts from xt60 connector, and insert them into slots in part with same orientation. This part allows to move high current battery wires away from magnetometer in rear GPS module. V2 is version…
P
Printables
SpeedyBee Mario 5 Dual antenna mount (NO XT60) 2 versions
Dual antenna mount for SpeedyBee Mario 5 XH frame, ANTENNAS ONLY. This download contains 2 versions. Version 1 matches the default Mario 5 antenna mount profile. Version 2 is slimmer and has easy-install slots which prevent the need to…
P
Printables
Speedy Benchy
Speedy benchy AKA speed boat benchy. For all your fast needs on water. NEEDS grid SUPPORTS on build plate only. Tests some parts of your 3d printer
P
Printables
TPU DJI O4 Antenna + 21mm GPS Mount for Speedy Bee Mario 5
This is my attempt at making the new DJI O4 Air Unit compatible with the SpeedyBee Mario 5 frame and an HGLRC M100-5883 GPS module. The mount should also fit a variety of 21mm GPS modules, though I haven’t tested it with others. It must…
P
Printables
SpeedyBee Mario Front GPS Holder
Replaces the TPU GoPro Mount on the SpeedyBee Mario frame with a secure low profile GPS holder. The GPS unit will snap into place and be held with friction. Small hole with curve for cable routing. Fits small 15x15mm GPS units such as the…
P
Printables
speedybee-master5-stack_side_plate-without-led_usb-plug complet
Runcam SpeedyBee Master 5 V2 5 pouces FPV Freestyle cadre O3 unité aérienne numérique VTX RC Drone de course - AliExpress 26 Plaques de protection laterale pour le SpeedyBee Master 5 V2 avec insert USB. j'ai apporté des modifications…
P
Printables
Speedy bee35 Dual antenna mount
Dual Antenna Mount for DJI04. with or without receiver antenna mount. I appreciate any feedback ! If you like this feel free to support me ( https://www.paypal.com/paypalme/NikaSte?locale.x=en_AU )
P
Printables
Speedy Stitcher Bobbin
I designed this spare spool to accept a steel axle rather than to include the axle in the print. This is to enable me to wind thread onto the bobbin using a drill. A plastic axle wouldn't survive for long. For the axle use 3mm or 1/8"…
P
Printables
Wall Mount for SpeedyBee Master 5 V2
3D-Printed Wall Mount for SpeedyBee Master 5 V2 Designed for easy installation, the mount includes pre-drilled holes (3mm) for screws or adhesive mounting. Print Settings Rafts: No Supports: No Resolution: 0,2mm Infill: 2-3 walls 100%…
P
Printables
SpeedyBee Mario 5 Motor Arm Cable Cover
Mario 5 Motor Arm Cable Clip – Easy Snap-On Design This custom 3D-printed cable holder is designed to neatly route and secure the motor wires on your drone. It features a simple snap-on clip mechanism, making it easy to install and remove…
P
Printables
SpeedyBee Master 5 Stack Side plate from TPU
This is side plate to protect stack on SpeedyBee Master 5 drone. Side plate is only 0.8mm thick made from TPU - it will easy adopt to your motor cable layout. USB port is not exposed because I'm using wireless configuration - you can cut…
P
Printables
Speedy Spider Adapter with inserts for Ender-5 S1
Uses inserts instead of nuts to fit the hotend in place, reduce the offset from the center to improve part cooling and reduce bending forces when feeding. You will need m3 screws and inserts. I use it with this fan shroud to improve…
P
Printables
SpeedyBee Master 5 v2 DJI 03 Air unit dual antenna mount
Designed using Fusion360 This mount allows you to change your single antenna out for dual HGLRC LHCP Long Range Antenna FPV Hammer 2.5dBi Mini 5.8G. sold on amazon…
P
Printables
SpeedyBee Mario 5 GPS for Gopro Slot
Basic GPS Mount with cable routing. It was designed for the HGLRC Mini M100 GPS Module. It can be printed in TPU without any Supports.
P
Printables
SpeedyBee Mario 5 arm motor protection
Remix of the original speedybee arm protection to overlap the top of the arms