Liczymy pasujące modele…
Printable accessory developed specifically to enable you move your Original Prusa Enclosure around easily. The handle is symmetrical, but you need to print 2 pieces. Check the guide on how to install the Transport handles . To mount both…
This hoodie-shaped pen holder brings a sporty, playful look to any desk. Inspired by modern streetwear, it’s designed for young users, students, gamers, and creatives who want something fun but still functional on their workspace. The…
New Gen Whistle!!! Very very loud for every events: game, alarm, sport. After printing it use a screwdriver to free the inside ball (only for ball inside files). No support needed and fast printing! Imported from Maker World.
These are a great example of "Print-In-Place" 3D printing, there is no assembly and these utensils are ready to use right from the print bed. Previously I had made the Tanto and the Trainer blades, but knew in the back of my head that…
Summary This is a model of a VW T5 Multivan (Facelift) in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but…
Transport belts from Factorio are ready to be printed. Belts share the same scale as all other official Factorio models. Models are fully modular, enabling them to be assembled in every combination possible in the game. Belts can stand…
This is a small sport hovercraft that is simple to build and decently fast and agile. Materials: 2x 1407 brushless motors 2x 15a brushless ESC 2x 3in prop 1x 9g servo 1x at least 2ch receiver 1x battery connector(I used an xt30) 1x 3s or…
Everyone who is traveling with a Caravan knows it. The grassel and bollards in the fridge because the bottles bump into each other all the time while driving. With the help of this spacer, you can easily determine the size of your…
These models are modular in design and made to connect to each other.
This model is one of many Print-in-Place add-ons for my Modular Truck project. Print-in-Place means that all parts are printed in one go with no assembly required. All add-ons can be connected to the truck seen in the pictures. With this…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Introduction I always wanted to have a flexible transporting system for my gear. Sometimes I take a lot of stuff, at other times only the essentials. Now it is time to present my concept: it is based on “Euroboxes” which are widely…
Ein Verkauf ist strengstens untersagt! Leider muss ich sehen, dass mein Design oft geklaut oder kopiert wird. Ich habe viel Arbeit hier investiert und erwarte, dass die Lizenzregeln eingehalten werden! A sale is strictly prohibited!…
It is oft required for the Legions of Rome to deploy their hastati and Principe in a rapid platform that can also lay down substansial fire support. Enter the Kimera Armoured Transport. Equipped with a hull mounted auto grenade launched,…
This is my version of a wall mounted holder for sports balls. Pictured with a size 5 soccer ball but it will fit most balls up to and including a full size basketball. (Update: I've added a second version that has a simpler mounting…
Remix from: https://www.printables.com/model/333283-simple-brushless-rc-sport-hovercraft
Dash air vent grille for Volkswagen Transporter T4. Replaces original part 701819071 or 701819072. Added top honeycomb to prevent objects from falling into the vent. The attached model is intended for the right side, to print the left…
Rugged Box adapted for 3/4/5 passports In the pictures you see 4 german passports with standard dimensions ---------------------------------------------------------------- 11/05/25 - Files added for 3 passports…
Measuring Spoon & Funnel Set for Protein Powder & Sports Drinks. Ideal for Milkshakes & Shakes, Perfect for Kitchens & Restaurants. Print the different parts and glue the parts together with the right amount of superglue. The sliding flap…
About DJI Neo Adventure Command Center Introducing the DJI Neo Adventure Command Center : a rugged, all-in-one transport solution engineered for drone pilots who refuse to compromise. This shockproof transport vault not only houses your…
This is just test Gcode, for more info (userguide) please look at: https://3dlabprint.com/shop/cessna-152-based-trainersport-plane/
Watch band with speed holes; designed to fit 44mm Apple Watch I printed this in 95A TPU and it worked pretty well. I tried printing the sizing peg out of various materials but the TPU held well enough and I didn't have to make it in…
Any feedback would be greatly appreciated . NOTE: Could try printing the case with ZERO top and bottom layers, perimeters: 8-10, honeycomb infill at 5-15%. Supports everywhere, style: grid, top Z distance: 0.25mm(for 0.2mm layer), top…
Update 2024-07 : I added some variations of the model with slightly wider tolerances as for some people the default version was too tight. The notch that holds the joycon is 0.1/0.2 mm thinner in these versions. I also added a file with…
Experience the thrill of supercar engineering with this 3D printable STL model of a McLaren Sports Car. This aerodynamic performance model is perfect for automotive enthusiasts looking to display the sleek design and exhilarating speed of…
~120dB 23x55x14 mm (mini) Print Time 1 hour 23x78x14 mm (Normal) Print Time 1.30 hour The normal version has a deeper sound (peak at ~1560 Hz) This version is better for longer rangs like emergencies. The mini version is comparable to a…
Hoping to be lightweight modular miniature storage and transport for magnetized miniatures. I use steel striking blanks in the slots to allow the miniature to attach. The lid can be secured with rubber bands to make a decently robust case.
Lock Pinning Tray (LPL style) by Dr. Lex Remix. Easy to print! There is a small groove in the bottom of the pin slot that allows you to place the little nub on directional Medeco pins. This slot serves to orient the pin as to easily…
Rims for RC car. Made in Blender.
Don't lose your keys to the depths of the seas! The Floating Keychain is for anyone who needs to use a key when around water. Prevent your keys from sinking by attaching the Floating Keychain. Use cases include boating, fishing, water…
Ferry enables the small Surprise Egg Tiny Haul Truck from [AGEPBIZ] https://www.thingiverse.com/agepbiz/designs to be transported over the water. So you have fun on land and in the water :) Surprise Egg #1 - Tiny Haul Truck…
Just a simple Spork| Goeffel| Foon whatever. .stl/.step is without the graphic seen on the picture Use a food- & temperature safe filament PA/PP etc Print instructions Category: Outdoor & Garden Summary Just a simple Spork| Goeffel| Foon…
1/64 Hotwheels trailer is compatible with Matchbox and other diecast brands. Scale to desired size and print!
Quest 3 Controllers - Sports / Active Strap Mod This is my mod to reuse my 14mm wide velcro straps (from my quest 2), it'll fit anything up to that (10mm on aliexpress recommended if you don't have the ones from the aftermarket quest 2…
Classic Transport Truck for 3D Printing: No Screw and Support Material Needed Best print orientation for maximum strength result Easy to print Easy to assemble Easy to rescale More Updates: https://www.instagram.com/toymakr3d/ You need to…
Summary Here are 3 variations of a VW T5 Transporter (parcel service edition) in a kit card style. Some characteristic details can be discovered. Everything is based on this model . After printing, the model can be assembled with the help…
Includes STL and Bambu 3MF file.
Overview: This system was designed due to popular demand as a second version of my Bike Acessory Storage Rack. This style of storage rack is inspired by the Tons Gear Organizer product . It is designed to work with a 1" (specifically,…
Update 23MAR21: I've uploaded V5 of the mount, and also added the display mount. V4 was still a solid design, but I made some very subtle changes based on my range outing last weekend where I was using it on a handgun. The Magnetospeed…
NOW CUSTOMIZABLE: https://github.com/fidoriel/Mini-Tray You can modify this code to generate you size. You may create a PR. Update 26.01.2023: Today I have decided to make the OpenSCAD source public, because there were some requests for…
This is a project of a yacht with features of a typical Dutch "Bakdekker". I am now busy printing the hull and fittings. A STEP file of the entire boat is available. !!! Everything is still in design phase and can still change !!! the…
The Bosch L-Boxx Mount is used for installing on a transport dolly and securing the Bosch L-Boxx Storage System on top of it. Print Settings: Perimeter: 4 layers (0.4mm Nozzle) Infill: 40% Gyroid Layer Height: 0.2mm Support: Support on…
The Speedline wheel from the legendary Audi Sport quattro S1E2 Group B rally car, in 1/10 RC form. Designed to be paired with this: https://landlmodels.co.uk/collections/audi/products/quattro-s1?variant=29373806575677 This wheel has an…
A dead-simple way to carry a rifle in a truck, SUV, or side-by-side. Hook the small end around your headrest post, drop the barrel into the large end. Tension holds it. No drilling, no adhesives, no hardware, no straps. Headrest posts:…
Now available OPEN FRAME version! Two version Basic size with BP-272 battery Large size with BP-307 battery It is need for assembly 8 pieces of M3 x 30mm silicone sealant for sealing the joint
Das ist ein Haken der für die Thule Produktreihe (Urban Glider 2/ Chariot Sport / etc.) funktioniert. Im Gegensatz zum Original ist er etwas größer.
This is a Magura plastic clip for transporting your mountain bike with the wheels off. All dimensions and measurements were carefully taken from an original Magura pad spacer. Print with supports with the flat side facing down and the…
A handheld tray for transporting Gridfinity holders from location to location. I use mine for moving my nuts and bolts from my garage to my office and back again. Printable on Prusa sized bed (the 5x5 model) Printable on smaller Ender3…
Showcase personalized automotive style with this 3D printable STL model of a Customized Mazda Miata MX-5. This tuned sports car model is perfect for automotive enthusiasts and personalization fans looking to display their passion for…
Mounting rubber using a hole and a seating groove. I recommend supports, because of the roundness of the handle. ! WARNING ! WEAPON, HAZARD OF INJURY
Whole balls and half balls included ALL 25% Scale Recemented. 20% infill, the more the heavier These are just for fun, and not intended do be used as real use balls. i use them to throw upwards laying down if i'm bored and thinking of new…
Own a piece of automotive legend with this 3D printable STL model of the 1993 Porsche 911 (964) Turbo. This legendary German sports car model is perfect for automotive enthusiasts and fans of air-cooled Porsches, showcasing iconic design…
Clean and nice looking cover for the original transport handles from the original Prusa Enclosure. makes the handles more stable and can also create a nice two color look if you print it in a different color than the handles itself. No…
Easily scalable and multi-purpose sports ball themed holder stands. Makes a great little gift for a sports fan. Choose from either 15mm or 10mm groove cut variants and from the following sports: ⚽ Football (Soccer) 🏀 Basketball ⚾ Baseball…
These are a Remix of the amazing models by TheSameNameTwice. I adjusted some of the belts so that everything would work in a true grid as well as new dovetail geometry, a new end cap for side loading, and holes to allow easy color swaps.…
Celebrate the legendary status of Japanese automotive performance with this 3D printable STL model of the Toyota Supra MK4. This iconic JDM sports car model is perfect for automotive enthusiasts and fans of tuner culture, showcasing…
Feast your eyes upon this fully articulating Kom'rk class fighter inspired by the “Nightbrother” ship piloted by Darth Maul in the rebel series. Wings rotate 360 degrees with locking positions at 90 degree intervals, but there is good…
1:48 ORIGINAL SCALE ▪▪▪▪▪ 18 PARTS ▪▪▪▪▪ 39 X 88 X 41 MM ▪▪▪▪▪ STL FILES ONLY ▪▪▪▪▪ ❌UNSUPPORTED FREE EDITION — a free simplified and smaller version of the complete model based on LEGACY EDITION (see the comparison table in the picture).…
POLARIS KEY COVER For RZR Ranger General Sportsman from TPU Two models: Wider top with place for adding personal name, this specific has my name on it, Slim top without place for personal name.
Radiomaster Pocket screen mount for Emax Transporter 2 FPV drone goggle monitor. Wanted to be able to use it on my radio as the goggles done work with my eyes. Screen attaches with a standard ¼" tread 5/8" machine screw. See the attached…
Can be printed at .28mm layer height without issue. There are two versions of the top. A blank top or a top with an embedded plane.
Minimal transport and protection case for the DJI NEO Drone: https://amzn.to/4eot6Td New V2: Thicked Top added hinges added charging opening with cover For v2 the cover should be printed with TPU or FLEX Material A M3 screw and some 1 mm…
This is the “Freight Ten” as inspired by my four “Mongruxx” Novels. It includes the articulated version. It can be printed as a stand-alone Freight Ten, or with the powered tailor. For all of you Sci Fy tread heads out there. Transport…
This is my interpretation of the "Rollwagen" used in (East) Germany to transport standard gauge wagons on narrow gauge tracks. Several are still in use, amongst others at the Harzer Schmalspurbahnen (HSB).…
This is a 3d printable propeller for the Hobbyzone Sport Cub S V2. I find the plane going faster with my propeller than with the stock one. Print settings: No supports 0.10 layer height (Brim)
My Shop bought Sports roller was too long for my sports bag and it also would not roll on the floor for my foot. So I designed my own. This Sports Roller will fit in your sports bag plus it can also roll on the floor to use with your feet…
3D letters that can be printed in separate layers/colors or stack the STL files to print in multi-colors using MMU or Palate or just the slicer ‘change filament settings’. The ‘simple letter stand’ is available in a separate listing.
3D letters that can be printed in separate layers/colors or stack the STL files to print in multi-colors using MMU or Palate or just the slicer ‘change filament settings’. The ‘simple letter stand’ is available in a separate listing.
You gonna need 4 magnet 5x2,5x2 mm https://www.unimagnet.cz/kv-05-2-5-02-n_z634/ Model of chainsaw is here: https://www.printables.com/cs/model/139476-chainsaw-110 07.01.2024 - I added petrol and oil can. It is not my work, unfortunateli…
I was inspired by https://www.thingiverse.com/thing:5233832 . However I decided to draw my own model because: I have different magnets I like rounded shapes I want to have possibility to press it only from the top I want more precision…
Introducing the Vaessen Motorsports VP-2, these are a long term project following on from the VP-1 pedal set I released. I liked that set, however it involved a lot of machining work which is not feasible for most DIY makers. I set out to…
Parametric Sports Sight for Hot Shoe Includes OpenSCAD source code Three different sight variants FreeCAD source file for one variant of the sight Print instructions Parametric Sports Sight for Hot Shoe Includes OpenSCAD source code Three…
I designed this cupholder for a VW T4 Transporter , maybe it also works for other models (NOT TESTED!!!) Tips & Tricks: To print this cupholder: It is needed to use SUPPORT!!! I doing my best to make the model printable. Material: 2x…
Printable toycar which needs a little support, the support is needed on the blue highlighted area within the last picture. The clipper holes can be printed without support, as supports there is an pain to remove. Note! Dowload the 2.0…
Passport Holder v1 Experience the fusion of rugged design and user-centric adaptability with this passport holder. Engineered specifically for the discerning traveler, this design isn't just about aesthetics but also a testament to…
This model is compatible with the lego system.
Bob Lazar supposedly worked at S4 near Area 51 back in the late 1980's on a reverse-engineering program that he claims began there in 1979. The "Sport Model" is one of nine flying discs at the S4 facility. Some were recovered crashes, and…
Mini Cooper clasic sport scale 1-24 Fiat 600 year 1961 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
Overview I've struggled with knee pain while sim racing on my Fanatec Clubsport V3 pedals due to the brake pedal placement. Some folks have successfully swapped the brake and clutch pedals to help with this, but I think this is a sub-par…
I made my own Bronco Sport Key Holder for the gap between the cup holders. I would print at least PETG, if not ASA or ABS. Print Settings: 15% infill .2 layer height
Still working on my Fusion skills so i designed this box to store my SD-cards. This box can hold 8 SD-cards and 16 micro SD-cards. The lid screws on to hold the cards securely in place. I've added 2 bottom versions In the bottom version…
The model has a slightly more ergonomic recessed grip and a cover of 5mm. The cover makes the lower screw a little more stable on the acrylic. You can use the same nuts and bolts that are used for the original.
3D letters that can be printed in separate layers/colors or stack the STL files to print in multi-colors using MMU or Palate or just the slicer ‘change filament settings’. The ‘simple letter stand’ is available in a separate listing.
3D Numbers that can be printed in separate layers/colors or stack the STL files to print in multi-colors using MMU or Palate or just the slicer ‘change filament settings’. The ‘simple letter stand’ is available in a separate listing. I've…
KIA Sportage storage container Storage container that can be placed in the center console of the KIA Sportage (model year 2022 and newer). May also be suitable for other KIA models with those ‘can’-spaces such as the EV6, xCeed, etc. Just…
I made a tablet holder for the headrest in the Enyaq Iv Sportline edition. Because of the weird shape it was not possible to buy on in the store. I bought a regular tablet holder on Amazon.…
3D letters that can be printed in separate layers/colors or stack the STL files to print in multi-colors using MMU or Palate or just the slicer ‘change filament settings’. The ‘simple letter stand’ is available in a separate listing.
This protector is intended to slide under the Joy-Con 2 joysticks during transport to prevent the sticks from being pressed and moved. This should make the joysticks last longer and delay the development of stick drift. Print settings:…
Hello sports and music fans, combine your passion for both by showing off your favorite sport with one of these smooth and elegantly curved knobs. For the single piece set each has its own 🌀 wormhole styled base suited to its sport. Easy…
Volleyball medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill medal is…
Mounting solution for the Fanatec ClubSport DD/DD+ power brick, Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print two mounts The Series 15 that I modeled the mounting to is from tnutz.com and has a 38.10mm spacing from the…
This is a spacer that can be fitted to Shimano Deore disk brakes, so that wenn you remove the wheel with the brake disc and accidentally activate the brake, the brake pistons dont fully close and you are still able to insert the wheels.…
3D letters that can be printed in separate layers/colors or stack the STL files to print in multi-colors using MMU or Palate or just the slicer ‘change filament settings’. The ‘simple letter stand’ is available in a separate listing.
Trabzonspor armasının renkli 3 parça çalışması. delik yatay büyüme :-0,3 ayarlanması gerekiyor.
3D letters that can be printed in separate layers/colors or stack the STL files to print in multi-colors using MMU or Palate or just the slicer ‘change filament settings’. The ‘simple letter stand’ is available in a separate listing.
The original design didn't fit my shelves, it was to loose. I redesigned it and reduce the radius of the curve in other to make it more tight.
A space freighter model to be used in dioramas or as a civilian ship (objective) in space themed wargames like Star Wars: Armada or Battlefleet Gothic. The level of detail is optimized for a length of 6cm / 2.34in Full model with supports…
3D Numbers that can be printed in separate layers/colors or stack the STL files to print in multi-colors using MMU or Palate or just the slicer ‘change filament settings’. The ‘simple letter stand’ is available in a separate listing. I've…
3D letters that can be printed in separate layers/colors or stack the STL files to print in multi-colors using MMU or Palate or just the slicer ‘change filament settings’. The ‘simple letter stand’ is available in a separate listing.
