Liczymy pasujące modele…
Rugged Box adapted for 3/4/5 passports In the pictures you see 4 german passports with standard dimensions ---------------------------------------------------------------- 11/05/25 - Files added for 3 passports…
Any feedback would be greatly appreciated . NOTE: Could try printing the case with ZERO top and bottom layers, perimeters: 8-10, honeycomb infill at 5-15%. Supports everywhere, style: grid, top Z distance: 0.25mm(for 0.2mm layer), top…
Portafilter Funnel for espresso machines, comes in multiple sizes. Features: Tamp through Prevents waste (Spill over) Sits properly no magnets needed! Works well in combination with WDT tool Easy to clean Beautiful Print instructions…
Es handelt sich hierbei um einen Gürtelhalter für digitale Meldeempfanger vom Typ Swissphone X15 oder X35. Dazu gehört noch der Metallclip zum einkleben. Die Passung ist so gut das einkleben aber nicht nötig ist. Es hält auch ohne sehr…
Can be printed at .28mm layer height without issue. There are two versions of the top. A blank top or a top with an embedded plane.
Filament 1.75mm Resin Anycubic tested
Passport Holder v1 Experience the fusion of rugged design and user-centric adaptability with this passport holder. Engineered specifically for the discerning traveler, this design isn't just about aesthetics but also a testament to…
Das ist eine Halterung für alle Swissphone s.QUAD Melder für den Nachttisch damit der Melder nicht herumliegt oder dauerhaft in der Ladestation steckt. This is a holder for all Swissphone s.QUAD pagers for the bedside table so that the…
Tired of breaking my thumbnail when loading Hi-Capa mags, so I made this... I saw a few others on here, but was unsure if they would work on the Novritsch SSP1 mags so I just drew up my own. It will load 29 bbs (31 is max, but the spring…
Swissphone Boss Meldeempfänger Clip.
This is my design of a shooting patch dispenser, BOM: Printed Parts Plastic sheet(optional for windows) 3x M3 Flat Head Screw (25-27mm or ~1 Inch) - For the Single Dispenser Version OR 3x M3 Flat Head Screw (~50mm) - For the Double…
Added the Fusion 360 file if you need to resize. Will need supports.
replacement for the original four-piece set náhrada štvordielnej originálnej sady
Redesigned version of glock carbine kit, that i made for my ssp18, lightweight and compact. I printed it with Pla+ and 6 internal walls, main body need support. Airsoft use only !!!
Remix of dMosher's design “ Larger Console Tray for Honda Pilot or Ridgeline ”, with minor improvements. This should be compatible with the following vehicles that use “Base Tray” part number 83407-TG7-A01 or 83407-TG7-A02: 2016-2022…
Simple Aruba Accesspoint Stand. derived from vivap2p "Aruba Access Point Mounting Bracket". Printable without supports, brim recommended.
A low profile top rail for the Novritch SSP1. A M3-35mm Phillips or Allankey bold and a M3 Nut is used to fix the botom rail in place. (It schuld hold on ti's own) Print Settings Layer Height = 0,2mm Infill = 50% (it will work with less,…
Whity's rugged box edited to fit external USB HDD (WD My Passport) and keep it safe (mainly against impact damage, but creating a rubber plug for the cable opening is on my mind - then dust and partianlly even water should be kept away…
This is a remix from some Glock magwell and made it fit to SSP18. This SSP18 magwell has lanyard hole. I used M4 x 15
Pistol stand for Novritsch SSP1, M1911A1, and HK USP45 ________________________________________________________________________________________________________ If you want, you can buy me a beer :)…
Quick passport sleeve before a flight so it wouldn't get bent in my bag. Worked like a charm!
My take on a Boss Swissphone belt holster. All in one version is ready to be printed as it is or melt some 5x4mm hest inserts in the mainbody and screw the holders with m3x8mm screws in. You can design your own design to screw it on. So…
Small stand for Unifi wifi 6 lite accesspoint for vertical (temporary) placement. simply use pair (or 4) nuts&bolts to assemble
Note: A new case design with potentially better microphone quality is available: https://www.printables.com/model/873274-fabric-wyoming-satellite-case Non-printed materials required for assembly 1) M2 8mm round head screw - 2 pieces 2) M2…
Printed in resin Filament 1.75mm 0.2mmnzl
All parts here are designed to be printed in TPU except Motor Clamps which I print in PA12-CF and Lifter Lock which is PLA, PETG, or basically any material really. Full CAD files and more details for the robot are available on the store…
Protection case for 3-4 passports. Printed in PETG. Wall thickness 1.5mm. Inspired by https://www.thingiverse.com/thing:4775177 but I've made a new design to make it thinner.
I've remixed it : removed signature doubled finger holes add a bottom hole to help pushing up enlarged a bit (both sides) 2 mm each The bottom ring support can be removed easily, it only helps to stabilized it during the print. I used…
Swissphone clip for every type of pants
I've you're always interested in keeping you're passport safe and avoid damages, a protection is best. This case can store an international passport and some other small documents, like boarding passes, … It uses a rubber band to keep…
Modular Moss Pole for Climbing Plants Ideal for climbing plants such as philodendrons, monsteras, and epipremnums, this modular moss pole provides sturdy support for your green friends. Dimensions: Width: 60mm Height: 210mm Features:…
Designed for WD MyPassport 2.5 External Harddisk, Hold up to 7x for storage OR 4x for hdd farming. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Esun ABS Red Category: Computer
Printed in PETG of PETG-CF V2 it is also possible to charge the Swissphone in the charging station V3 Same as V2 but improved overhangs
I have developed (and possibly pushed to the limit) my ideas for compact chess that I have published before, in particular the CastleChess set . In the new project, a small box contains everything you need to play. And the kit is…
Quick holster for the Novritsch SSP5 No retention mechanism, meant only for storing the pistol between games when used as a primary or with a m4 adapter like I am. Of course Novritsch sells these in metal which will hold up better but for…
Print standing up on it's spine with a substantial brim, I used 10mm. Recommend setting seam to “nearest corner”. No supports necessary.
Some years ago I made this model and published it on my Thingiverse account because there were not many passport cases back then. On here there seem to be tons, hence the name “yet another passport case” seems to be more relevant than it…
DE: Ein 1:1 Dummy des Swissphone Boss Melders, der von vielen Feuerwehren und Rettungsdiensten in Deutschland genutzt wird. Er passt in Ladestationen, Taschen und an den Gürtel-Clip. Es sind 3 verschiedene Varianten in den Files. -Die…
I designed this utility tray for my Pfaff Passport 2.0 sewing machine. It holds all the bobbins and sewing feet in a neat fashion. There is still room underneath for scissors and other equipment. Print Settings Printer Brand: Zortrax…
A standard gridfinity holder for four passports. Each passport has its own slot and the slots are fanned out to make it easier to grab an individual passport. Includes standard magnet holes. Chamfering on the slots makes it easy to load…
I designed a mosspole for my climbing plants. It's 60mm ID / 65mm OD and has a net high of 156mm. Two kinds of bases are also included, a normal post-style one, and one to put in the pot before adding the soil. You can also use some…
Batteriefachöffner für Swissphone s.QUAD 0,2mm Layer 3-5 Wall Infill 30%
A passport case for dual nationals. OpenSCAD model given for customization (changing country codes).
Was looking for a storage solution for passports for the whole family. There was nothing suitable available on printables.com or makerworld.com so i decided to make my own. As i printed already many of the SnapLock Boxes by @Hugo i…
Elevate Your Coffee Experience with the Upgraded Rotating Coffee Pod Holder! Keep your countertop organized and stylish with this newly enhanced coffee pod holder. Designed to store both Nespresso and Dolce Gusto capsules, this upgraded…
Print it with either with support or with a good printer which is able to bridge the upper frame properly
SSP18 mock suppressor Shoutout to “H6K2LH” for the idea. I need to mention that this is not a repost, I did make these on my own, so please, don't call me a copier. I made this model because I wanted a super cool looking mock suppressor…
printed with creality fast PLA 0,2mm Layer hight on a modified Ender 5S1.
NOTE: This design is based in a design of a another person that I had at home and I 3D printed some years ago, I tried to find the original source so hard but it seems almost impossible. If you find the original source please tell me to…
Trailer hitch cover fits 2026 Honda Passport or similar with OEM trailer hitch and 2" receiver. Recommended Print Settings: Material: PETG or ABS recommended for outdoor use (PLA okay for short-term use) Infill: 20–40% for strength Layer…
Make sure your passport won't bend during travel, by using this fancy passport sleeve. To make it I measured my 2024 Dutch passport at measurements 5.9mmx90.5mmx125mm. I redesigned this to fit larger passports (EU-size), since the…
As a family, it becomes pretty hard to keep track of all passports when travelling, and becomes a source of anxiety as well thinking of losing a passport. I created this case to fit all the passports in the family in one neat case. It has…
This fits a German passport. Other passports may not work if they are of different dimensions. It fits if your Passport is 130x95x4 mm or 130x95x5 mm. If your passport holder works with your passport work, please tell me. With engraving…
Remix of Thor's amazing solution of a Hi Capa M4 Adapter
"CrossPot" - the Motocross (Helmet) Planter for your window sill! A must-have for every motocross fan! The planter is available in various versions : with holes without holes A self-watering version is planned! So stay tuned! The hole…
The newest iteration of the Australian passport is notorious for curling up and warping of the cover due to temperature and humidity. So I've made a sleeve that helps retain the shape of the passport for long term storage. This is made…
This replaces the unused button area by the interior lights with a cable passthrough as well as a threaded insert to allow for the cobb mount to screw in and sit flush. allows accessport to sit flush with the panel and keeps in out of the…
I found this inventive vent clip: https://www.thingiverse.com/thing:3880775 However, it's intended for right hand drive Focus MK3 ST and RS models. Since I'm in the US, I sliced up the mount in Tinkercad, mirroring the asymmetrical…
This is a replacement part for the Swissphone quattro Best printed with SLA
Adjusted version of jufy111's cup holder insert for smaller cups, modified for 2019-2025 Honda Passports (and I think 2016-2022 Pilots and 2017-2025 Ridgelines).
This is a magazine loader/ thumbsaver for the Walther SSP and SSP-E. Printed in PLA with 4 perimeters and 25% infill
4x1 Gridfinity compatible. Print details: Ender 3 S1 PRO PLA 5% Infill CHEP EXTRA FAST 0.28MM CURA SETTINGS
Použijte lepidlo a šroubky M3 Use glue and screws M3
This is just a simple wall mount for test leads. Mounted with three screws or double sided tape. As usual, this was printed in PETG.
Handguard for the Novritsch SSP18 featuring M-LOK slots and a full-length Picatinny top rail. Uses M3*30 Screws and M3 Nuts. Includes Inlay for the Picatinny rails to reduce wobble 3D printed in PLA with 0.2 mm layer height, 0.4 mm line…
Wer hat die Geduld dieses Puzzle zu lösen? Das Puzzle ist leicht zum drucken.
this is a thred adaptor for the SSP5. gowing from stock 12mm internal threds to 14mm right handed externel threds.
En snusspruta för att få en perfekt prilla varje gång. Inspirerad utav prismaster.Packa sprutan med snus och tryck ut det under läppen, lätt som en plätt! Du kan behöva trycka med en mejsel eller dyl för att lossa den inre delen.
Just a simple hanger to mount an older Western Digital external HDD on a PS5. Supports are needed for the hooks.
Držák na ořechy do kufru . Přišroubovat vrutem průměr 6mm.Držák na ořechy do kufru . Přišroubovat vrutem průměr 6mm.
Wandhalterung für Swissphone s.QUAD Melder (z.B. für selbstgemachten Melder-Parkplatz) Wall mount for Swissphone s.QUAD → Melder ist nicht mehr im Winkel sondern flach in der Halterung
This is a replacement dummy switch with a pass-through cutout sized for the Cobb AccessPort's OBDII cable. It definitely fits the 2022+ VB WRX but may also fit other models. I never liked the idea of using the dash-top vent mount for the…
Case for Rhasspy Pi Zero 2 W with Respeaker 2 Mic Array and a small Speaker.
This is a trigger lock to prevent unauthorized use of an FX Dreamline pcp air rifle. Simply print in STL orientation at 0.2 layer height and 25% infill with no support, attach a padlock and lock. The trigger lock will work with any…
Two easy-to-print hooks for adding an additional drive - WD Passport - to your Synology DS218 server. Add adhesive felt pads and everything will sit tight.
Introducing the Swissphone BOSS Pager Holder – a sleek and efficient solution tailored specifically for your Swissphone BOSS pager. Crafted with precision and functionality in mind, this 3D-printed holder seamlessly combines lightweight…
Holster für Swissphone sQuad X35 Dieses Holster ist zur Nutzung mit den Standart Gürtelclips, die es auf diversen Platformen gibt, gedacht. Einige Vorteile sind Vorbereitung für Gürtelclips vernünftiger halt am Gürtel stabile Ausführung,…
Ich habe mich einmal hingesetzt und das bekannte Spiel rund um die sechs nachgebaut. Es werden 40 Stäbe und ein Würfel mit sechs Augen zum Spielen benötigt, die Stäbe in Zehnerpacks habe ich ebenfalls hochgeladen. Die Regeln: Jeder…
We designed a custom measurement boxes according to the rulebooks with 7.5mm thick walls for increased durability. IDPA boxes can be stacked into eachother for better storage. Rulebook internal dimensions for the box 8 3/4” x 6” x 1 5/8”…
Re-Uploaded DenTek Floss Pick Holder by Mdavisgtm Note: This is a re-upload and I am not the original creator of this design. All credit goes to the talented Mdavisgtm. Introducing the DenTek Floss Pick Holder and Carrying Case - Your…
This print belongs to economic, flash prints. it is a wall mount for Western Digital HDD "My Passport Ultra"
Was missing this one, and someone asked for it :) Hope it helps, also hope it fits, didint test myselef yet. Stay frosty! All hand down to Chris Borge (Original creator or RSMM cnc) Having fun putting it together and making a list of…
model require reworking an airtag to make the case as slim as possible. there are two versions. one or two passports
🇩🇪 Swissphone s.QUAD Ständer für X15 / X35 / Voice / C35 / C45 Dieser präzise konstruierte Ständer ist die ideale Ablage für deinen Swissphone s.QUAD Melder. Er ist so ausgelegt, dass er komplett ohne Support gedruckt werden kann – für…
2x4 Gridfinity storage for 4 passports, insurance cards and travel money. Angled to enable storage within an IKEA Alex short drawer.
Hier ein Standfuß für den Homematic AccessPoint zum kostenlosen hinstellen. Breiter Standfuß mit Kabeldurchführung. Access Point wird 45Grad eingehängt.
Hier ist eine selbst designte Smartphone Hülle für ein Pixel 7 von Google. Es wurde ein Ausschnitt in dem Rücken der Hülle eingefügt. In diesen Ausschnitt kann man die passende Einlegekarte stecken um diese schnell zu personalisieren,…
I was unhappy with the Passports, Mother-Baby-Passes or Vaccination Passes in my drawer, so I designed this little thing, It has a vertical storage for Passports or Vaccination Passes. Also can be used to store some Credit Cards or…
*** You are doing me a big favor by clicking the Like button :-) *** 45 degrees holder for Ajax GlassProtect
Just a quick and simple print to keep my external My Passport drive out of the way and recover some of the precious, little desk space. Its open on one side and top to make for removal easy when its go time. If you liked and found this…
Customized version of https://www.thingiverse.com/thing:1571860 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1571860 Instructions Using the following options: Base_Diameter = 32.2 Base_Overlap = 35…
I redesigned the funnel based on my 2023 Lelit Anna with PID. I am still not perfectly happy as the water still spills sometimes, when poured to enthusiastically. Printed Standing up on left side with support. Update Jan 2025 Added a 1 mm…
(Tested) A case to wear the Swissphone Squad X15 pager on your belt.
Small keychain pendant of the Crosspolo 9N3
Welcome Quick photo frame to print for standard passport / ID size: 45mm x 35mm. Enjoy!
V8 engine with cross-plane crankshaft. No glue, no screws required
Hier ist ein simpler Festplatten Halter. Er bietet Platz für 4 Festplatten. Es handelt sich um 2,5" "WD My Passport" USB HDD. Gedruckt mit 0.4er Düse, keine Supports oder Brim notwendig. Ein einzelnes Modul zur Erweiterung liegt auch bei.…
I made this replacement part before I loose the original one since I doubt I will be able to ever buy one… I made 2 versions. One that is the same as the original and one with a narrower cut for the blade. Don't know on which other models…
The knobs on this portable sound system were old and irrevocably sticky. So I popped them off and made new ones. Much better! These were designed to be as close as possible to the original looks of this particular sound system, but they'd…
A simple drive foot to stop my WD passport drive falling over when stood on top of my Mac Mini. Drive just slips into it, and it's sized to be stable, and for all cables at the rear to clear. Designed in F360 - files here:…
