62 modeli
Please comment, rate, and post a make! Update 2/1/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with an…
The ESP32-C3 Supermini itself is not a model I made, I just used it as a reference when making the model of the Expansion Board. It was made by GUILHERME FLORENCIO on GrabCAD. Link here: https://grabcad.com/library/esp32-c3-super-mini-1…
Model approximating the budget bluetooth development board
I wanted to make a simple case for the smallest ESP32C3 that I could find for use within a Mitsubishi AC. There is a CN105 port on several Mitsubishi ACs that allow you to control the unit remotely without spending $100+ on an official…
A simple 1x1 Gridfinity box that can hold 14 ESP32 C3 superminis
I need a thermometer and a hydrometer for my room, so I designed easily assembled enclosure. ESP32 supermini has wifi connectivity, which matches my purpose. I also designed without DHT sensor version for use as an ESP32 enclosure only.…
Simple case for the Esp32-C3 "supermini" that can be attached somewhere with double sided tape. The plug that locks the ESP32 inside has a small opening for led strip wiring - this is what I used it for. It can be fixed in place with a M3…
A simple click-lock case for an ESP32-S3 SuperMini. Nicely fitting, snug without being tight, with a small cable hole at the back for WLED or any other cables you want to run externally. The click-lock is tight and made to be that way for…
Case for a LD2410B combined with a ESP32-C3 SuperMini. No supports required.
Added USB C Connector ( https://www.amazon.de/dp/B0CL9F34GT ), others may not fit!
Case for driver of Akszon LED Skaut project This is case for ESP32-C3 SuperMini. Remixed to allow easy firmware upload (thanks to integrated BOOT button hinge). Case have clear "ESP32-C3 SuperMini" label to distinguish from other boards…
An ESP32 C3 Supermini case that has pin cutouts so you can use breadboard wires.
This is a custom snap-fit case designed for the ESP32-C3 Supermini with its expansion board. It securely houses your board while offering three different variants to suit your prototyping needs: Full Access : Both left and right header…
I saw the model "ESP32-C3 "supermini" case for simple led strip" that @tigert_36892 had made, and thought that what it lacked was the ability for the buttons to be used. Aside from that it was a geniously simple design. So I started…
Please comment, rate, and post a make! A simple case for using an LD2410C radar sensors with an ESP32 C3 Mini that can be mounted to the HSW. I've included a little spacer that can be slid over the pins of the LD2410C to help with…
Compact enclosure for ESP32 C3 supermini and ghs tb connector
*Updated profile to v2 - improved design which is now easier to take apart (better gap tolerances, and an indent at the back to prise it apart without damage). Snug click-lock case to build an mmWave sensor for ESPHome using an ESP32-S3…
Came across this post on reddit , where a user created a custom PCB with the following sensors : Sensirion AG SHT-40-AD1B Temperature and Humidity. Sensirion AG SGP41-D-R4 NOx and VOC. TDK ICP-10111 Barometric pressure and temperature.…
A minimal, precise, and functional enclosure designed specifically for the ESP32-C3 SuperMini board. Engineered to fit like a glove while keeping full access to connectivity and board features! ✨ Features & Technical Specifications…
Make a tiny and powerful Bluetooth proxy for under 5 EUR! It can even double as a night lamp. This is a simple case for an ESP32-C3 supermini with an external glue-on antenna. Ideal as a Home assistant Bluetooth proxy. There's space for…
This is a modified version of the ESP32-C3 Supermini case. Changes made: Resized to fit the ESP32-C6 Supermini board. Added a honeycomb mesh on the top for ventilation.
ESP32-C3 Supermini WLED Case This is a remix of @dm1x_1486268’s ESP32-C3 Supermini WLED Case with several modifications for better usability and cooling. 🔧 Changes in this remix: ESP32 rotated and USB-C connector hole added for easier…
ESP32 C3 “Supermini” (USB-C) Gridfinity Storage Bin This 1x1x4 Gridfinity bin can hold up to 8 of these little boards snugly and securely, to protect the delicate switches and other components on the PCB. The base uses GridfinityRefined,…
I started with Luna's fantastic esp32 case and trimmed it down since I'm using an esp32c3 SuperMini . This isn't the prettiest remix on the inside, but it worked well for my needs. I made a bunch of these for espresense nodes around my…
Just a basic bottom cover for ESP32-C3 for development extension board to protect both your table from scratches and your board from shot circuits in case of occasional touch with metal or any other conductive surface. See also other…
Fits ESP32 super mini (I am using C3) + DC-DC module
ESP32-C6 “Supermini” (USB-C) Gridfinity Storage Bin NOTE : This is for the C6 Supermini board specifically. The bin for the more common C3 “Supermini” board can be found here . This 1x1x4 Gridfinity bin can hold up to 8 of these little…
ESP32 C3 SuperMini pendrive case for USB connection Made in Autodesk Inventor (ipt file included)
Habe für meinen Gaszähler ein Gehäuse benötigt, welches den ESP32-C3 SuperMini, den Reedkontakt mit Verkabelung aufnimmt und sicher am Zähler befestigt ist. Auf MakerWorld hab ich ein Gehäuse gefunden, welches super in die vorhandene…
Nodemcu ESP32-C3 SuperMini WiFi Bluetooth 5.0 USB-C Case with Pins // Remix: Less filament usage & better fit with bad 3d printers
Wanted something smaller so I made something smaller measuring only 52x42x10mm Fits the ESP32 S3 supermini as well as a opensmart 433mhz transmitter Needs 2 heatset inserts and a pair of 7mm m3 bolts
case for esp32-C3 supermini zero with lid
how to build Solder an ESP32 to a Came Top-432 remote. Those remotes use a similar case and should have the same PCB form factor. I tested with a Top-432-EE model. On the remote PCB, solder 3V3 or 5V (depending on if your remote use 2*3V…
case for esp32-s3 supermini with heatsink for heatsink i used raspberry pi heatsink ~14x14x6mm 2mm squishy thermal pad (total space for heatsink + thermal pad is 7.2mm and these raspberry heatsinks are less than 6mm most of the time) 4x…
Ive been using this for 3x temperature sensors on a esp32 c3 supermini. Soldering the connectors to the pcb.
This case fits an ESP32 C6 and a SCD40 CO2 sensor.
Introduction This is a version of the OttoDIY Wheels that features line following, obstacle avoidance and sound. It comes with an app to control the robot with bluetooth. I couldn't find complete descriptions and 3D models of this version…
adapter block for minecraft ore block lamp for esp32-c3 supermini
reuploaded from my thingiverse account that I am now leaving behind as I migrate onto Printables
An ESP32-C3 and LD2410C enclosure for your ESPhome presence sensor needs! No hardware is required, and all parts can be printed in any filament you want (except probably carbon-impregnated filament, since that'll mess with your radio…
Simple snapfit case to protect an ESP32 Supermini with header pins. I use it for a simple LED-based notification, so there's no need for access to the header pins. I printed the front in black and the back in white. This obscures the…
reuploaded from my thingiverse account that I am now leaving behind as I migrate onto Printables
holds an esp32-s3 supermini
Modified case to match the dimensions of the ESP32-S3 supermini, plus added port outlet for a power delivery trigger board. Changes done with generic and negative objects just right in the slicer. PD-triger board advantage: you can put in…
Thick-USB case: a 12.1 × 6.9 mm pocket in the end wall, so chunky USB-C plugs (up to about 11.5 × 6.3 mm overmold) seat fully. The original slot only fits slim plugs. 16 mm ball back: the original flat back with a 16 mm ball on a…
Easily attaches to the pump body with double-sided tape, securely holding the attachments in place. Keeps accessories handy and perfectly complements the original design of the Baseus SuperMini Pro.
This is a compact mini breadboard holder designed for the ESP32-C3 Supermini , created to make quick prototyping easier and cleaner. The design allows you to reuse the metal rails from a standard breadboard . Simply remove the rails from…
This case designed specifically for the ESP32 C3 SuperMini. The case is tailored to be extremely skinny, utilizing a form-fitting, tight-tolerance design to keep the overall footprint as small as possible, ideal for size-constrained…
A slim desk clock / info panel for the WeAct Studio 2.9" e-paper module (296×128, B/W or B/W/Red), driven by an ESP32-C3 SuperMini . Inspired by Echo Show style wedges, but thinner and simpler: 104 × 34 × 56 mm. ### Features - Display…
how to build Solder an ESP32 to a Came Top-432 remote. Those remotes use a similar case and should have the same PCB form factor. I tested with a Top-432-EE model. On the remote PCB, solder 3V3 or 5V (depending on if your remote use 2*3V…
A simple click-lock case for an ESP32-S3 SuperMini. Nicely fitting, snug without being tight, with a small cable hole at the back for WLED or any other cables you want to run externally. The click-lock is tight and made to be that way for…
*Updated profile to v2 - improved design which is now easier to take apart (better gap tolerances, and an indent at the back to prise it apart without damage). Snug click-lock case to build an mmWave sensor for ESPHome using an ESP32-S3…
ESP32 C3 SuperMini pendrive case for USB connection Made in Autodesk Inventor (ipt file included)
Nodemcu ESP32-C3 SuperMini WiFi Bluetooth 5.0 USB-C Case with Pins // Remix: Less filament usage & better fit with bad 3d printers
This case designed specifically for the ESP32 C3 SuperMini. The case is tailored to be extremely skinny, utilizing a form-fitting, tight-tolerance design to keep the overall footprint as small as possible, ideal for size-constrained…
Model approximating the budget bluetooth development board
This is a compact mini breadboard holder designed for the ESP32-C3 Supermini , created to make quick prototyping easier and cleaner. The design allows you to reuse the metal rails from a standard breadboard . Simply remove the rails from…
