Liczymy pasujące modele…
Remixed top half of Moyina FT232 USB to TTL Adapter, USB to Serial Converter Case by @scorf and added 3d text that was inspired by USB to FTDI Adapter Case - with pin labels by @MyStoopidStuff The text is “upside down” but just right for…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For the realization of this small box you will need: USB converter: https://www.gotronic.fr/art-convertisseur-usb-serie-ft232rl-gt1125-26140.htm Wires with their X6 connectors of your choice. Model used in my case:…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A OpenSCAD case for AZDelivery FT232RL adapter, to fully enclose the adapter, with "pad" to ZIP-tie the jumper cables. Originally the ZIP-tie pad was flat, but it was way too easy to break it off. Then I changed to this triangular-ish…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
Simple case for FTDI FT232 USB to TTL Serial converter module. For simpler usage, it contains also description of pinout and output level switch. Designed in OpenSCAD. Printed on Alfawise EX8 with Alfawise PLA, which explains not so nice…
this is a housing for a usb-serial converter I recommend ISO7380 M3x6mm screws, but the print also provides clip-in without screws Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0,2mm…
Toyota Celica T23 Easy to print . Of course you can scale it the size you want. Easy to print for up to 120cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and…
BOM required : ESP32 CMT2300A dev board with “E49-900M20S” chip OLED 0.96" screen “SSD1315” Dupont connectors External “868MHz~915MHz Antenna” with an IPEX4 <> Female SMA cable Use “Snug” support for both part and add “build plate only”…
Case (top and bottom) for OpenDTU hardware Printed on genius pro 0.2mm no support 2.5mm screws are needed to close the case. I used 2.5mm insert to attach ESP32 to the bottom (insert are heated thanks to soldering iron) You have 2…
A case for a FTDI Adapter FT232RL. Pretty tight fit. https://cuitbuilts.wordpress.com/2018/03/04/ftdi-adapter-ft232rl-case-3d-print Print Settings Printer Brand: Ultimaker Printer: Ultimaker Original Rafts: No Supports: No Resolution: 0.2…
Adaptor for the Tokyo Marui KSG airsoft gas shotgun to allow mounting of a T238 Shotgun tracer unit. Note: I recommend printing on its side with supports to help take the weight off the layor line direction and printing in PETG/ABS, Im…
Replaces original Audi C4 sail panels 4A0857505 and 4A0857506 with mounts for Morel MT230 tweeters. I suggest printing from ASA filament on an enclosed printer. I've included the original scan of 4A0857505 if you want to model different…
This is a simple casing for the "Adafruit FT232H IO" board. The SCAD files can be downloaded here https://github.com/andimoto/case\_adafruit\_ft232h Assembling the case with 2mm or 2.5mm screws. Print instructions Category: Electronics…
I bought Some Dell monitors and used them for some time. Eventually I got a mount, so I could have a 4 monitor setup. These didn't have VESA mounts, so I was looking at replacing all my monitors. I decided to model an adapter to fit on my…
Housing for the PCB from Waveshare. If printed with transparent filament, LEDs are still visible. Clueing both parts togehter is optional, as the fit quite fine.
i changes it a littlefit to make it suite to my ft232rl board
A minimalistic case for the USB-TTL module HW-417, which uses FT232RL. This is widely available on AliExpress and co. The modul needs no support and assembly is done without screws or other tools. Printing: Layer height: 0.2mm Infill:…
Print sideways for best orientation of layers lines for functionality of the part. Use Medium to stiff TPU, or make sure to use enough infill so that the part won't collapse under the weight and movement of the trunk lid. I used a stiffer…
Inspired by the original design by plasmata this case is redesigned from the ground up to fit the current Moyina FTDI to Serial USB adapter . It exposes the pin markings on the board for easy connection ID and is a bit shorter than the…
I printed it from PETG (3 perimeters) and sandpapered. O-ring sizes, which I used: Recommended material FPM75 (Viton). Smaller: ID:25mm TH2.5mm Bigger: ID:27mm TH2.5mm…
Seal can be pushed with old or new nut. When the tool is fully in, the securing part of nut is still outside of thread. FTC4939 text was added in PrusaSlicer. FreeCAD file attached. I used PETG, 4 perimeters, 30 % infill.…
I designed these skirts in order to install my power supplies on the underside of the printer. The original feet were too low in order to fit them. All other skirt mods would need to be printed on a bigger printer. Therefore i designed…
Thanks for the design. https://www.printables.com/model/7025 I didn't want to install any LEDs, so I closed the holes.
Replacement TV leg for Vizio TV. The numbers on the leg are P34T2335 and XLC01C0100 for a circa 2015 model. Three options Original 30 degree offset Straight Just the connector to add to your own print I printed upright with supports to…
A simple case that I made for the FT232BL board with USB-A.
The enclosure is for the FT232RL based USB-serial converter board sometimes referred to as YP-05. It has a six pin header at the short side, with pins for GND, CTS, VCC, TX RX and DTR. A jumper allows selecting 5V or 3.3V for VCC. My…
Just a small case for the Case for Hailege USB zu RS485 TTL Serial Converter Adapter FT232RL 75176 https://www.amazon.de/dp/B07Z1V5WQS
Snap fit case for a common FTDI TTL Serial Module. All the cases I could find were press fit (didn't stay together) or required screws. Plenty of clearance around the USB port and the pins to allow space for connectors. This case snaps…
Celica t23 folding mirrors button cover
Snap fit, no hardware required. It's a tight fit for the PCB, which ends up helping hold it in place.
remixed from https://www.thingiverse.com/thing:3789215
Toyota Celica T23 climate control rod. Details: https://pm.sbx.ink/2019/04/%d0%ba%d0%bb%d1%96%d0%bc%d0%b0%d1%82-%d0%bd
A simple case that I remix for the FT232RL board with USB-A.
Snap fit case - keeps it on securely, but can be pried off to change voltage level from 3.3V to 5V :)
ORGANIZZATORE GT23 Realizzato:www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
I don't have the PC4-M6 handy, so I used the M10 ones. Use the recommended VzBot print settings, which can be found here .
I needed a case for my Gimx adapter, so I built one. It consists of three parts: the main case, a separator and a cover. The used parts contain: - Arduino Pro Micro Type C - FT232RL - Small wires - And the 3d Printed case parts…
For toyota celica VII My first model may not be perfect, but it works Petg 25% infill
Added wall mount with two 3x screw holes
ORGANIZZATORE GT239 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
ARTE&DISIGN GT23 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W
A housing to fit a cheap USB-C to UART adapter. This is a remix by modification of the original FreeCAD files of the mini-USB version. Changes: redrawn the USB-C connector opening added recess with generous clearance around connector…
Serrated tear-off edge with guide aid to prevent material from the label-roll wrap around the roller - with fitting lid
Just print as much as you want
Remixed version of the @Adafruit Snap Fit Case for Feather RP2040 Scorpio for their FT232H Breakout . Modified to fit the smaller FT232H breakout and added options for no mounting tabs on bottom and embossed name. Removed mounting holes…
ARTE&DISIGN GT236 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
ARTE&DISIGN GT237 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
For when your custom shifter knob leaves a bit of the shifter exposed. Designed with original Celica T23 gear cover in mind. Also works on other cars with 11.5mm mm shaft. Height of part is approximate. Measure first, and scale height in…
This is a simple cup-style holder for the commonly available T238 impact-style Airsoft/NERF grenades. The brim has a close enough tolerance to provide a slight friction-fit. Printed on a Bambu P1S with 0.4mm nozzle using High Speed PLA.…
ARTE&DISIGN GT238 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
MODELLINO DI ABITAZIONE GT23 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
ORGANIZZATORE GT232 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
ORGANIZZATORE GT235 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
ARTE&DISIGN GT230 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
ORGANIZZATORE GT236 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
ARTE&DISIGN GT231 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
When trying to take apart and lubricate my creaky window switches I broke one of these. Without it the switch is limp so here's the printable replacement part. Print on its side with support for best result and function. I printed it in…
ARTE&DISIGN GT233 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
ARTE&DISIGN GT235 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Can be used as a replacement pin or as an extra when doing modifications to the control box.
ORGANIZZATORE GT231 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
ORGANIZZATORE GT238 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
ARTE&DISIGN GT239 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
ORGANIZZATORE GT230 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
ORGANIZZATORE GT234 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
I designed a complete 3D model from scratch for a custom bellypan molding specifically tailored to fit the Triumph Speed Triple 1050. Starting with precise measurements of the bike’s frame and lower fairing area, I created a detailed…
PARTI MECCANICHE FUSION_GT23 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
ORGANIZZATORE GT233 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
ORGANIZZATORE GT237 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
ARTE&DISIGN GT234 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
An adapter for easier loading of MWS mags with the T238 loaders
This plate replaces the original one that requires a sticker to be applied to make the T238 V1.7 V3 PRO MOSFET ETU work. Inner hole of the plate is slightly shorter than the original to cover the optical sensor for fire selection. Plate…
ARTE&DISIGN GT232 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
cache de protection tracer t238 griffon sans vis a cliper sur le tracer
A small box for the Sparkfun FT232R breakout board, useful when you need just the Tx and Rx lines. Printed in transparent PETG, so the lights are still visible. Make sure your board fits, as the box is quite tight. The OpenSCAD source…
Needed a larger and easier to turn knob for my blowtorch nozzle due to some dexterity issues, but did not want to break the original removing it. This design solves that by modeling the original handle almost exactly, giving a good…
A sliding case for an FT232 USB to Serial programming unit with storage for micro clip leads. Inspired by the case @jattie released for a serial programmer, I built this from the ground up to accommodate test clips and a slightly longer…
Mijing T23 PCB vise and its various variants is very nice for SMD boards but it has not enough vertical clearing for THT components. Here are some simple spacers which rises board additional 15mm over the original clearing. For each clamp…
A frontpanel for the PT2339 karaoke reverb frontpanel. Two versions. One with a lip and one simple frontpanel. Text was manually added in orcaslicer and is not included. Depending on print settings the mic input separator might need to be…
This is an housing for the T238 Nano featuring 14 x 1.0 CCW threads and an easy twist mechanism to insert and remove the tracer. Special thanks to ABCDOMG for the threaded base file, after a bit of scaling it worked amazing :) It was…
This is a case to house the serial adapter to run the ptt for a trusdx ham radio from a laptop computer. like a remote control with a bigger ui. this case nicely houses the whole entire board and audio jack adapter in a single dongle.…
Just a small case for the Case for Hailege USB zu RS485 TTL Serial Converter Adapter FT232RL 75176 https://www.amazon.de/dp/B07Z1V5WQS
Remixed version of the @Adafruit Snap Fit Case for Feather RP2040 Scorpio for their FT232H Breakout . Modified to fit the smaller FT232H breakout and added options for no mounting tabs on bottom and embossed name. Removed mounting holes…
A sliding case for an FT232 USB to Serial programming unit with storage for micro clip leads. Inspired by the case @jattie released for a serial programmer, I built this from the ground up to accommodate test clips and a slightly longer…
Snap fit, no hardware required. It's a tight fit for the PCB, which ends up helping hold it in place.
A OpenSCAD case for AZDelivery FT232RL adapter, to fully enclose the adapter, with "pad" to ZIP-tie the jumper cables. Originally the ZIP-tie pad was flat, but it was way too easy to break it off. Then I changed to this triangular-ish…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
The enclosure is for the FT232RL based USB-serial converter board sometimes referred to as YP-05. It has a six pin header at the short side, with pins for GND, CTS, VCC, TX RX and DTR. A jumper allows selecting 5V or 3.3V for VCC. My…
A housing to fit a cheap USB-C to UART adapter. This is a remix by modification of the original FreeCAD files of the mini-USB version. Changes: redrawn the USB-C connector opening added recess with generous clearance around connector…
I designed these skirts in order to install my power supplies on the underside of the printer. The original feet were too low in order to fit them. All other skirt mods would need to be printed on a bigger printer. Therefore i designed…
