Liczymy pasujące modele…
What is it? This is a modular stand for technologies cards from board game called Twilight Imperium. A single stand is designed to hold all 4 cards (or 6, if you play with cards from expansion) of one technology type. Multiple stands can…
I made a simple phone holder so I can watch shows while at gym without having to look down all the time. This holder fits the screen of TechnoGym treadmills (typically at LifeTime Fitness) and holds my iPhone 16 Pro in Apple leather case.…
A simple case for yet another USBasp dongle. This one has “USBASP v2.0 LC Technology” markings on it.
This filter module belongs to the @planttechnology air intake system. It is lightproof and filters dust. If you use Bambu Studio I recommend you to open the .3mf file there and the corrects stettings for your printer will be importet. If…
These are stands for displaying Technology cards in the board game Voidfall. They are designed to improve card visibility and reduce the footprint of the game on the table. The Technology Tableau displays up to twelve different Technology…
Райзер предназначен для 3д принтера Qidi Q2. Высота 45мм. Стекло можно сдвинуть (как на стоке), и поднять на 90°. Печатать с поднятым стеклом, я бы не советовал. Выкручиваем винты (2шт) крепления верхней крышки. Укладываем райзер и крепим…
Commercial use is NOT allowed for this model.
I find treadmills extremely boring, but it's can be a good way to get exercise. To help pass the time, I like to put youtube videos on while I'm running, but there's nowhere convenient to mount my phone. This holder is designed to clip…
A super light (around of activation force 10g) switch for use with Assistive Technology. Utilizes the really sturdy Omron A22NZ-S-G1A contact block for reliability, sturdiness and solder free installation. This normally has an activation…
Bracket for the La Crosse TX145R rain meter. May fit others with similar size. Designed so the rain meter sits securely and to allow water to drain easily. Secures with 4 screws (I suggest deck screws as they won't rust). You absolutely…
Jack 6.3 cable holder to place just behind the stock handle with the stock screws
Printed in TPU 95A Makes button very sensitive. Is perfect
Here's how it all fits together.
3D printable blockstamp of the logo for Technocopia makerspace in Worcester Massachusetts!
Printed on Reprap Fisher Delta at 15% infill, no supports. Required drilling out the centre hole to 5mm as it was not quite a perfect fit. An M5 nut should be glued in the end with the hex cutout.
This is a model of the Techno Trousers from Wallace and Gromit that I made with makerworld. This is the makerworld Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
These are stands for displaying Technology cards in the board game Voidfall. They are designed to improve card visibility and reduce the footprint of the game on the table. The Technology Tableau displays up to twelve different Technology…
Helps children change gear easier. Secured with three stainless steel M3 bolts and heat set threaded inserts. Feel free to use the included FreeCad model to change to any other type of fastenings. Printed with the "lid" flipped with the…
What is it? This is a modular stand for technologies cards from board game called Twilight Imperium. A single stand is designed to hold all 4 cards (or 6, if you play with cards from expansion) of one technology type. Multiple stands can…
I could not find connectors to make a clean connection between Technoflex EcoBorder garden edge sections and I did not like the look of simply cutting the edge at an angle so I designed my own using OpenScad. I tried to fully generate the…
Size up or down to your liking! I just had fun making it, and so I'll make sure to post more stencil art here!
Nate From IT. Shrink it to the size you need. He is a bit of a cannibalistic Geanstealer. But will also fix the database. works for Arcana Solutions.
Mounting plate for DIN rail WiFi LC Technology 5V 4 Channel Relay Board (LC-ESP01-4R-5V). With the option of adding a 36V/5V stabilizer. https://templates.blakadder.com/LC-ESP01-4R-5V.html
The stock pins are a pain in the butt. They're not only super small, but they are made of transparent plastic, making them invisible in your floor if you drop them trying to install your Pinlock. Ask me how I know. That is why instead of…
If you find my designs useful, please consider sending a tip TechnologyOutlet now supply CopyMaster filament on cardboard spools, which have hollow centres. This means, for those of us with bearing-based filament holders, there's nothing…
Support pluviomètre la crosse technologie pour pergola
A cookie cutter for techno lovers and everyone else :) Surprise your friends with it! A real hit :D
Support la crosse technologie by Mika version 2
Technology discount tracker for Military, Transport and Civilian technologies making it way easier and faster to pay for Research action, instead of recalculating that every time. Slots are sized for the black resource dice (8mm) that…
The neighbours battery holder for this intertechno PAR-1000 broke ... so I fixed it with a 3D print
Information: I actually designed this stand because I needed something for my handheld PC, but I realised it was actually useful for most devices. After printing it, I realised that this would actually be useful for a lot of people. This…
Als ob es nicht schon genug gäbe, aber es gibt nur wenige in 2-Komponenten-Ausführung :) Haken aus TPU, 100% Füllung. Box aus PLA, etwas Unterstützung für die kleinen Zahnbürstenhaken, mehr nicht. Ob viel oder wenig Infill spielt wegen…
I needed some drink coasters so I figured why not make some. I went through 4 iteration of the base coaster design so that They can snap together like LEGOs when not in use. I printed these with a overall size of 100 mm diameter and they…
The CT-LPS-T35 right-angle 3.5mm connectors I have came with caps only for 3mm cable diameter. I designed these to be able to use larger-diameter cables. Included are variants for 4mm and 5mm cables. Since they're very small I recommend…
screw connection for conecting 50mm pipes with other technology via 1 1/2" PETG is working quite well, but rather would use PC or ASA
This is a posable model of the Technotrousers from the Aardman animations movie Wrong Trousers. You can either glue the legs in a pose, or set up springs that go through the balljoints with some m3 screws to keep the legs movable and…
This print is the 3D logo of the French Alps University for Bachelors of the Biotechnologie Grenoble. Design to put 2 colors. It was a first trial for two colors and design thin wall (for the DNA shape).
This model was created in Blender by @cris_k_b here at MKR Shift see more about us at www.mkrshift.com
Designed for Hattori Y121 movement: https://allwatchparts.com/Hattori-Y121-Watch-Movement_p_655.html Any 34mm Crystal. We use this one in production:…
This is a model of the Techno Trousers from Wallace and Gromit that I made with makerworld. This is the makerworld Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
A simple bust (two parts), if you use Prusa Slicer all parts are aligned as i printed them. I recommend 5% infill an overhang angle of 28 (for support enforcers only) and 0.15mm layer height.
Science and technology cookie cutters - atom size: 80.47 x 89.17 x 15.00 mm (3.17 x 3.51 x 0.59 in) Contains **2** .stl files with different style impress: **★ Stamp + Frame** (A dual-function tool that cuts out the shape and…
Science and technology cookie cutters - battery size: 52.17 x 88.62 x 15.00 mm (2.05 x 3.49 x 0.59 in) Contains **2** .stl files with different style impress: **★ Stamp + Frame** (A dual-function tool that cuts out the shape and…
I made a replacement foot for the Technogym run900 treadmill at work. Works like a charm. Material: ABS. (PLA og PETG will work, just had abs loaded) Layer height: 0.2mm Top layers: 5 Bottom layers: 3 Wall loops: 6 Infill type: gyroid…
Day 1 DLC Edition. . 12インチのカスタムアクションフィギュア用の1:6スケールヘルメット！ 1:6 polish the helmet for 12 inch play fun time your figures! . . . . このセットには、4種類のバージョンのヘルメットが含まれています： This gang 4 flavor of inclusive: . フィンや戦術担当官の弓がないヘルメット。 Cat hat balding lost…
New Joystick for a 80s or 90s NIKKO RC from the Technotoy line as my two were broken. Designed in FreeCAD you can change it to your needs like a shorter Stick or add knurling and so on. Print Settings Printer Brand: Creality Printer:…
This is a remix of @SASSyDesign's awesome “Techno Error Virus” plant pot to add drainage. The pot has been split into a main pot with drainage holes, and a drip tray with keyed indents to properly align the pot and tray since the overall…
Step back into the underground rave scene of the early '90s with this bold, high-energy keychain design. "NIGHT LIFE" is rendered in a stylized, retro-techno font with sharp contours, speedlines, and geometric accents — just like a…
just print the mount, glue the tray to the mount. you can print like 30% out of the rail so it would be another support under the floating part of the coil. i did it bc my diffuser is really heavy. the holes for storage go from 18mm to…
A vase or planter perfect for growing some off-world plant! There are two versions, one with a drain and one without.
Technologies Cards Stand for Twilight Imperium, stackable. STEP file included
This vacuum nozzle replaces the bulky dust boot that comes with the Techno CNC HD II series flatbed routers. It uses eight 12mm dia. x 3mm thick neodymium magnets to hold it clipped to the end of the spindle. It allows you to easily see…
Technoblade' Crown Printed in 2 parts: the crown (X1) and the gems (X17) You need too print the following colors: x1 light blue x5 green x4 red x3 purple x4 dark blue I made 2 size: -Normal (16cm gap) -Small (9cm gap) If you don't have…
Dieser Eckenschutz wurde ursprünglich für meinen Sub 18D gefertigt, passt jedoch auf nahezu jede Ecke mit einem Radius von 10 mm. Die Abmessungen betragen 60 mm × 60 mm × 50 mm , wobei alle drei Innenseiten einen Radius von 10 mm…
Einfacher Gerätefuß mit M5 großer Unterlegscheibe um die Stabilität zu verbessern. Er passt sicherlich auch an vielen anderen Sachen mit m5 Gewinde. Der Druck muss pausiert werden um die Scheibe einzusdetzten, ich habe sie zusätzlich mit…
Insert for, redesigned with STEP files: https://www.techkits.com/products/mold-epoxy/
Techno Buddha – Lo-Fi Vibes, High-Level Enlightenment 🎧🧘♂💻 This isn’t your average monk— Techno Buddha is fully synced and spiritually upgraded. Rocking headphones, radiating calm, and focused on his laptop, he’s your new digital-age zen…
More about the project you can find here: Technoethical Firmware Flashing Starter Kit - Technoethical
I took photos from nine puzzles (Casse-têtes, Knobel spiele) I found in the Technorama and redesigned them. One puzzle has no solution. I found it too easy, so I designed another one impossible to solve. This is the tenth one. I did…
The Technogym Group Cycle has no bike weights holder, so i needed to design one. The holder has two mounting points. Except the Holder you will need a 15 mm diameter 6 wood screw or M6 screw I recommend printing with 4 Perimeters and…
A fixer avec deux vis de diamètre 4mm et espacées de 6 cm. To be fixed with two 4 mm diameter screws spaced 6 cm apart.
Logo of NJIT (New Jersey Institute of Technology) Newark, NJ Category: Signs & Logos
Made from scratch, but from an idea seen here : https://www.printables.com/model/1313628-technologies-cards-stand-for-twilight-imperiumhttps://www.printables.com/model/1313628-technologies-cards-stand-for-twilight-imperium I've added the…
An adapter ring to fix the attachment of various accessories on a Technostar HD 2000 hair dryer. The teeth on all the bundled accessories of this hair dryer are prone to failure. They either get scraped (failing to snap in place after…
A futuristic and mechanical-style ring featuring a smooth spherical core surrounded by detailed techno elements – perfect for fans of sci-fi and cyber aesthetics. This model is a decorative prototype and the size can be adjusted in the…
A great demo print for all sorts of things
Replacement handle part from SteveO's Techno Pad Kit adaptated for 3D printing. UPD 17.11.2025: add rev2 files with cutout on the side surfaces like on original part.
Wall mount bracket for the TechnoLine WT 536 or TechnoLine WT 538 Projection alarm clock with cable storage compartment. This bracket is used to mount the projection clock on a vertical surface in order to achieve the optimal position for…
I made this lamp some time ago and I think that it looks quite goo just stick some fairy light in and boom Technoblade lamp. you can print without supports but it will print way smother with support than without. Have fun and happy…
I needed to see my Workout stats right in front of me, so i made a support for my Fenix 6 It fits The fenix 6 and fenix 6 pro and has a width of 22mm . I think it should fit also the new Fenix 7 Pro
SmartLens SNAP Install Guide (Type 2) - Used to aid in the installation of SmartLens SNAP units. This itteration does not require the SNAP unit's bracket as it is designed to fit directly onto the mount poles. Please refer to the…
SmartLens SNAP Install Guide (Type 1) - Used to aid in the installation and alignment of the SmartLens SNAP units for proper real-time locationing in retail environments.. Please refer to the SmartLens Installation Documents pertaining to…
This is the first 3D model I designed for 3D printing and my first dive into Fusion360. I learned a lot and I continue to learn. This stand is for a Zebra Technologies OEM switch used in one of our advanced locationing solutions. It's a…
Now for a character from my Starfinder campaign. As usual, scale accordingly using the flat axis. 25mm for a one inch grid. Doesn't print without supports this time. Category: Toys & Games
Just a little memorial for the Minecraft youtuber Technoblade who died in 2022 because of cancer. R.I.P Technoblade. He was loved by many and many were sad when he died. (if the text on the back breaks when slicing model idk how to fix…
Needed a little enclosure box for the Carling Technologies 622122-BB-NE toggle switch. Has a hole in the rear for wire leads to pass through. https://www.carlingtech.com/sites/default/files/documents/622_632-Series_Details_%26_COS.pdf…
For all my Production people out there, here is an under table mount for the Studio Technologies Model 370 and 371A Belt packs. I wanted something sturdier and better quality so I went the route of creating my own mount. You will have to…
📜 ARTEFACT PASSPORT Artifact Forge — Sector BL-9758 Artifact ID: AF-CFL-011 Name: “Griffin’s Eye”: Techno-Witch Lantern Class: DIY lantern Status: Active 🔦 Artifact “Griffin’s Eye”: Techno-Witch Lantern: When the sun sets over the…
Helps children change gear easier. Secured with three stainless steel M3 bolts and heat set threaded inserts. Feel free to use the included FreeCad model to change to any other type of fastenings. Printed with the "lid" flipped with the…
Updated May 3rd: Added a slightly better meshed version without the little wire panels on the base. they just didn't look very nice when printed. Modeled in 3d Studio Max Designed to not need supports. Feel free to remix the heck out of…
Download my full Seti insert (picture 5 and 6) For the best look, print in multiple colors as in the pictures. 🪐 Technology tile holders with storage box for Seti. Designed to keep all technology tiles organized, easy to access, and…
it can be used to carry any type Floppy Disk 3,5 inch.
During play, I was annoying with the Tech Cards. I wanted to have Structural and Combat separated, which are blocked, which are Projects. And then within unblocked Technologies, I liked to have my Argo Abilities separated, my Negotiation…
Another School logo, this time it's for Massachusetts Institute of Technology or MIT. Two STLs, the base and the shapes for the logo itself. The shapes for the MIT are chamfered on the bottom so glue will be needed to fix them…
The logo of the old Analog chip manufacturer Linear Technology Acquisition of Linear Technology by Analog Devices was completed in March 2017. Linear probably had the most employees that stayed for extended periods of time. The average…
STL files to recreate Kingston Technology's April Fools macroSD Card. This build will require assembly after printing. STL files included: Bottom Left Bottom Right Dowels Gold Connectors Latched Access Door Top Left Top Right XS Card…
This model is a 1:10 scale replica of the original. For the boom and mast, I recommend using PETG material; PLA is suitable for all other parts. Everything was printed on a Prusa CORE One. The stand and its legs snap together and should…
This is a front lens cap for the objective lens on the Fujinon Techno Stabi 12x28 Image Stabilized binoculars These binos do not have objective lens caps as part of the original purchase. I've tweaked the model so they are a more precise…
Suptronics Technologies x857 Case if you don't want to have a disk shared with the raspberry, but want to have it in a separate case.
3x2 Gridfinity bin for "04-000 Pro Touch Off Gage - Z Axis ToEdge Technology Z Axis Touch off tool"
This model is compatible with the lego system.
The “King Pig” from the Minecraft movie. There are 4 versions: The “movie” version (compatible with movie images), with 10 colors overall (6 different gem colors) The “full” version, with 4 different gem colors (7 colors overall) The…
My shirren technomancer or mystic for star finder when i started modeling for thingiverse one thing that really helped me was the community and one of those prolific artists is dutchmogul he provided free sculptris "dummies" which really…
After weeks of designing and hard work I have finally built the worlds best soda cap in the world.
