198 modeli
This Skadis rack can hold 2x a 250ml Tamiya X-20a, airbrush cleaner or lacquer thinner container. Inner dimensions are 55mm x 72.5 mm The design was inspired by the Skadis Tamiya Cement etc holder of SoBaldrick…
the g-code has the proper height of layer for the manual color change
This is a slight remix of the remix done by Mike_111723; original modular card wallet by CHKING. What I changed: Edited the Middle Section to be 3mm thinner, now only measures 3mm vs 6mm. Added key ring to the Middle Section. Edited the…
Designed from the start with thin, small, modular components in mind, this cloth is the pinnacle of FDM hard body mesh fabric design! Measuring at a measly 2.4mm tall at 100% scale, the cloth provides ample flexibility while providing a…
As thin as a toothpick and Stil 88 dB loud IMPORTANT: Use wall thickness: 3
I modeled this ghost from scratch using the original planter as a reference. The thinner walled models lower print time dramatically! Made the eyes a bit shallower to minimize the overhang. Included a solid model for vase mode prints!…
I created this remix because the original version was a bit larger than I needed, and I wanted to fit the cables in more snug. The original also broke when I went to attach the zip-ties, one bit snapped off. It was still usable, but I…
This is a mount plate that's slightly thinner - by 1.2mm; this allows it to fit into the cd slot on my old Seat Alhambra. In theory most of the VAG/VW CD players should be common in design..
Airtag Keychain with minimal material yet strong
A simple remix of boodaah3d's magnetic bed aligner model but chopped down so that the edges of the aligner don't stick up past the build plate. My build plate/heated bed is almost exactly 5.5mm thick, and this model sits just flush with…
The Milwaukee Cordless ratchet is a great tool but the knob to change directions is recessed and hard to turn. It's doable with bare fingers but difficult with gloves on. This knob makes it very easy and if it gets in the way its easy to…
Prusa Balance Game is great and the Prusa Balance Game Box is a great way to pack it. However, the Prusa Balance Game Box requires quite a lot of material. I have slightly adjusted the model by making the walls of the box thinner near the…
Remixed thinner version from Cat cookie cutters 6 pack by Valroy https://www.thingiverse.com/thing:3962320 Category: Kitchen & Dining
The inset was a bit too deep for the command strips I had on hand so I sliced off a mm or two from the back. Works fine, printed with .6 nozzle and 30 layer height.
⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩ Maybe this is more interesting for you - it's a prototype of a mechanical calculator based on this design: https://www.prusaprinters.org/prints/86506-mechanical-calculator-working-prototype (it jams less and is not…
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 0.16 Infill: 100% Filament brand: sunluu Filament color: dosent matter Filament material: pla+ Notes: Print with 85mm/s speed, 215º extrusor…
This is a remix of the same connect styles, but with 1mm widths so that there's less of a gap between the filters
This → https://www.printables.com/de/model/666244-prusa-balance-game-box-stand good model of a box for the balance game unfortunately did not fit on my printer I have reduced the wall thickness slightly and rounded the corners so that…
Printable without supports.
A little holder I designed for Tamiya thinner or airbrush cleaner bottles. Can be easily printed without supports. Grips in to the indent on the sides of the bottle. Simple, but very convenient :)
I'm a big fan of this hanger but the desk slot was way too big for my IKEA TROTTEN desk and after 6 months of usage the PLA started to deform and it kept sliding onto the floor. I remade it with much thicker walls and a thinner slot, and…
No support required. Kept the rest intact for strength and adhesion. Printed the first 3 layers in red and the rest in black with a manual layer change. Can also black out the top part with a sharpie if you don't like the whole top layer…
Found this neat model by BreakfastDeluxe , but I wanted something simple and thinner so I can throw it in my caliper case. All credit stil goes to him, just performed a little z cut on his name at the bottom :p
Ratrig Wire Guide with a thinner base and closed mounting holes. I installed this in my V0 with VHB tape. I made a normal version and a taller one.
Update Feb 2026 : Multiple diameters of spindle have been added. All new models have the V2 prefix. New spindles are not compatible with the old V1 base and bolt. Details: This is a smaller yarn winder spool for a generic Amazon yarn…
Brandon made a really nice tweak that made this fit better, but I really liked the filament notch from the original design here . This modified version just takes Brandon's version and adds that notch so that it's easier to use with…
This is a slightly modified version of the bottom reinforcement to have a tighter fit with thinner plastic. The original bottom reinforcement was too loose on the thinner plastic sheets I'm using:…
EDIT 2024-09-09 Increased the bottom layer so camera island is more protected Added another pattern cut out
Rack for 4 tamiya thinners/cleaners. Added fusion360 files Print instructions Category: Tool Holders & Boxes
I disliked the floppy vase-mode options I found for a purge bucket after printing them, but I wanted something that didn't eat quite so much filament as the parent. Because thinning out STLs evenly is hard, and I struggled for over an…
Simple remix. I thinned them out and added a bit to the notch. I needed to extend the tab because I also use the following spacers in my Kallax: https://www.printables.com/model/469429-ikea-kallax-spacer-vinyl-with-protective-film The…
Jonas original model is genius, But on the acrylic thinner bottle it was a bit tight and the clips did not seat properly, because on the side, the bottle has a raised design. I made this model from scratch using his idea. I shortened the…
just a small quick Skadis holder for the Tamiya X20A/ Lacquer Thinner in 250ml canisters. Print in any material you want, i advise for PETG since that is the material i used. Since the Thinner bottles aren't that heavy PLA should also…
I found it worked better when it was thinner, so I havled its height
I absolutely love Kytor's chute, it works perfectly. It unfortunately wound up being just millimeters too large for the area I have my X1C in. I shrunk the bottom area and opened it up for easy poop retrieval. Thank you Kytor!
This is a very lightly modified version of J White's excellent fan guard (which is a remix of Der Peiner's). For whatever reason, I did not have enough room on my printer for their model. The printer was detecting crashes and too short of…
Inspiration: When printing @SH -s 🍂 Organic leaves set I realized that his Round Scraper just needed a bit longer “skirt” to help me out. So Egg Shaped Scraper was born. Just try these leaves from here:…
Internal magnet Remix of @benp_1165147's remix of @EnricoPulvirenti version with internal magnets. Thinner version There is also another version which is thinner (not as deep). Print settings Pause to insert magnets Pause at beginning of…
I took off 2mm from the original mounting bracket by EvilProphet. One of my racks was off by 4mm and wouldn't fit. With the bracket having 2mm less width it provided enough room for me to slide in my rack. Hopefully this helps someone else.
Honeycomb wall storage for glasses. Needed a smaller version for the nose piece.
to be attacher with 3M VHB 5952 1" double sided tape
This is a Remix of my USB cable organizer meant to be wall mounted. This version is designed for thinner USB cables, with holes that are 4mm wide (the original model has 5mm holes). Similar to the original models, this one also has…
I used these to replace the thick windows on Walthers Vulcan Mfg. Category: Hobby
I wanted the same great idea by Jonas but for the Mr Hobby 400 ml bottles of thinner.
I wanted a thinner drybox to store filament in when not being used and didn't need holes or rollers for the bearing. Much simpler build AND Uses about 70% of the filament as the original drybox!!! Update 3/10/23 - I got tired of fighting…
Print at 0.2mm layer height, 5% infill, two walls.
The spring of the original model was too stiff for me, at least using the Sunlu PETG. I have modified it from a width of 1.6mm to 0.8mm to reduce the stiffness and improve the elasticity. I've used 0.4mm nozzle, 0.2mm layer height
0.5mm thiner Version of the Drop Stop for your Oral B Toothbrush Keeps your Toothbrush Charger clean All photos uploaded are of the actual printed model , and are copyright protected If you like this model please consider to buy me a coffee
i saw and wanted to print this decoration but i saw how the file was really thick and i didnt want a long print time that wasted filament so i made this remix to thin it down.
I saw a comment asking for a thinner, simpler version of this Skadis Gridfinity mount for those of us who don't need all the magent slots etc. I found myself in the same boat, not wanting to waste filament and time for the magnet slots…
This variant does not buckle the book pages as much (as said by the original creator).
This is a basic remix of the wonderful Tiny Epic Galaxies board game player mat overlay by Sherri making the back piece thinner to better fit the whole set within the original game box along with some other printed organizers. I removed…
I modified the clamp for much slimmer desks up to around 30mm thick. Can now be printed on the Prusa Mini!
Thinner walls from the original. I can adjust the model to include different container configurations, let me know.
I really liked Whity's Rugged Box model but felt that the inserts are a bit too thick. I decided to remix them with 0.8mm wall thickness (so 2 walls on a standard 0.4mm nozzle) to save some plastic and cut down on printing time. The…
Remix of https://www.printables.com/it/model/449462-stickman-bookend
I did a poor job printing the original and wanted to have another go at it since my overhangs came out really bad (printing way too fast). With this reprint, I wanted to optimize the wall depth a bit and make it fit on my counter better.…
There is no tolerance when placing the original “pdc_cannon2.stl” rear cap with the mags. Simple printer clean up was not enough and filing was necessary. This remix reduces the front to back dimension by 1mm. Bevels were removed for…
Get the rest of the parts from the original model here: https://www.printables.com/model/421435-6x3mm-magnets-3d-benchy-display-stand
same model quick and dirty proof of concept will make it fancy later...
Remixed Hogwarts Express platform 9¾ coaster. Total 4.4mm height and 100mm diameter. Lettering height is goes up to 2.0mm, so color change occurs after if multicolor. Enable ironing for better surface results. Pictured coaster was printed…
Use this T-nut with the rest of scaryPug's featherboard kit. https://www.printables.com/model/205258-featherboard-with-replaceable-heads-m6
I thought the original design was too thick and damages the pages of the books. This is only 0.8mm, instead of 1.5mm original, which is much more friendly to paper pages.
Thinner version of https://www.printables.com/model/829340-anbernic-rg35xxh-bumper-case with cutout in the back.
I needed to tighten up the space a little to squeeze one more drawer into my space.
This is the same free insert provided by the publishers but thinned out so that it'll take much less filament and time.
No supports needed
use M3 heat inserts to mount the ebb
I found that both the 0.8mm and 0.6mm variants of @8BitDrip_2287972 's RG35XXSP Membrane Inserts were too thick, so I used Blender to make an even thinner 0.4mm variant. I find this thinner variant works very well in my RG35XXSP and feels…
This is a redesigned Flat_Stripe for the 3D Printable Jet Engine by Catiav5ftw that fits the Spinner_Cone better. The original Flat Stripe was a little bit to wide to easily fit into the Spinner Cone for me, and I noticed a lot of other…
Cactus remix of Artmonso @Artmonso_322348 's model. Same cactus but thinner, and with a flat base. Save around 10% of material.
An easier way to control the altitude bearing for metric Hadley Telescope (M4) with thinner attachment pad and larger manual control wheel, compared to the last remixes. Print the same as the other parts of your Hadley. You will have to…
wanted to mount a dry box to my honeycomb wall. so, I slapped some honeycomb pegs on the back side of the Prusa wall mount dry box. I sliced it up, so it is only 80mm wide.
This is a backplate for the D20 Wall Art by geoffreyyoung. It adds a nice border and helps with the spacing. This is the plain backplate only. For the D20 pieces see: https://www.printables.com/model/63340-d20-wall-art This backplate has…
Just thinned down the AD5M glass clips that Tlochi created.
I was looking around for a Pumpkin lantern to print for Halloween and really liked UserS' one, but I had to split it into two separate models so it would fit into my 220mm square print area. While I had the model in Tinkercad I decided to…
Reduced sprocket, in addition, a suitably adapted pocket. 3.3mm holes prepared for inserts M3
Have you ever wanted to reward a friend but didn't know how, or rush a gift but didn't know what to get well then I would like to welcome you to the Everything trophy, for all your trophy needs, we've got it all From, Stars, to Gold, to…
White in flexible PLA, yellow in hard PLA. Customized version of http://www.thingiverse.com/thing:290279 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=290279 Print Settings Resolution: 0.2 Infill: 100%…
Simple Multiboard 250ml dual Tamiya thinner bottle holder. Push fit for Multiboard snaps. Printed on Bambu X1C using grey PLA pro filament as pictured.
Remix of Cardinal Wind Spinner Toy with Thinner Wings - Spins Better in Light Winds For Me (with some wd40 added to shaft as well!). I printed a pair of each of the thinner wings / mirrored thinner wings. The wings still have thicker part…
I made the headband about 10mm thinner to save time and materials printing. I included an attempt at a stack of 4 on them that I have not had the chance to test yet. Please let me know how it goes! The latest models needs to be scaled…
Thinner Haptic slider (for 8x1mm magnets) I advise using some glue since the insert is thinner tough it is not neccesary
Remix of Nathan Benjamin's excellent box - just without the cover
I used gerryw's original tray for about a year before the tabs broke off, perhaps due to user error. In any case, the walls seem thicker and more rigid than necessary. For this remix, I filled in the gap between the tabs, thinned the…
I really like the original design but it was too big for my cubicle divider walls. My version is identical to the original in all respects except it's about 3/8" shorter. Printed as per original instructions: Print Instructions: Supports…
All credit goes to Guillaume Gendron who posted this original version. https://www.printables.com/prints/97432-netgear-gs305-switch-under-desk-mount I just lazily clipped out 5mm worth of depth out of the base plate and shortened the…
This is a remix from Cat cookie cutters 6 pack by Valroy Cookie Cutters are thinner Category: Kitchen & Dining
Thinner - 1996 3D printable model. Prints in 2 parts. The figure and the sign. Size to your needs.
Thinner designed for other spool sizes - changed diameter and length Remix of: https://www.printables.com/de/model/158734-ender-3-s1-secondary-spool-holder/files I got some more unusual spool sized which couldnt fit onto the orignal spool…
Modified handle to accommodate smaller hands. - Handle slimmer by 5%. For how to and info pls go to original model.
I use these shims to adapt the 8mm bore of the 608 RS bearing to fit the (cheap) common ¼ inch by 20 TPI bolts that I use in my tooling and gadget design. I thicken the rim if I want more offset.
This is a modified version of the Ikea Cart Table Top Storage Clip RÅSKOG of Ender Ending Rodríguez for smaller tables / plates. It is modified to fit tables with thickness 12,5mm in the middle and 7mm on the outside. The radius for the…
Skadis Holder for Paint Thinner Bottles The inner Diameter is 49mm so it will fit anything smaller than that. Perfect for Humbrol and Revel Thinner Bottles Print from any Material you like, but i advise PETG for Stability. Layerheight…
This is a slightly thinner (more flexible) and importantly less deep version of Peter Main's Nextruder Nozzle Holder / Extruder Identification Labels. I found that Peter's original design could interfere with other tool heads passing…
This is a remix of the design from Weshape. I removed 6mm from the back side to place the speaker closer to the wall. It works just as well with the 2nd set of interlocking tabs removed but makes it shallower to the wall. Printed up with…
Note: This is my first time using Fusion360 and i do not know what i am really doing. I also included STEP file and the F3D file that I modified from the original post. STL is upside down, be sure rotate it so that the flat part is on the…
These are slightly modified brake racks for the Asare Pendular Rudders. These are thinner on the sides to make them fit in their housing.
![[Thinner] - Phone case for Samsung Galaxy A52/A52s](https://media.printables.com/media/prints/869183/images/6671360_41c19fc5-af1e-4afa-973d-462fdf90ad77_43514812-a56b-457b-a9fa-a4d983e920a1/img_20240505_152019655.jpg)
