Liczymy pasujące modele…
This is the housing for the NinoTNC board that sells on Etsy. I also sell these cases on Etsy as a service, but the model is free for download. This case has the A4 switch cutout in the top. I use M3x20 allen head screws to hold the case…
This is scope covers for DNT Optics TNC225R. This model is open sourced, originally created by me in OnShape (free CAD): https://cad.onshape.com/documents/adb0050f873ff66e82018843/w/f74eee5a9668a49b2e15d0b2/e/ac6ac35e0cebbabe29aa26b1 No…
Summary of changes in this remixed version: Two choice of top: One with original LED positioning, and one with the LED holes aligned with the PTT, Delay and Deviation apertures. Tightened up tolerances of front panel holes. Re-done front…
Modified to utilise an LJ12A3-4-Z/BX endstop sensor, and to fit around both sides of the main Z plate, to reduce motor wobble. There are also recesses to install M6 nuts, instead of using plastic threads. Additional holes in the design to…
I remodeled the model by nka, to work with my Nema24s, while reinforcing the two axis of the part. Worth noting that the mount plate is too thick to use the short bolts provided with the kit. Category: Parts
This is a z-axis independent dust boot for the PrintNC CNC Machine. You can use the thumbscrews to move the dust boot up and down depending on how tall your stock is. This design uses mostly metric components, except for a couple of items…
TNC modem housing. The design is described here: https://sq8l.pzk.pl/index.php/vp-digi-tani-i-funkcjonalny-sterownik-digipeatera-aprs-wraz-z-modemem-kiss/
I made this years ago for holding my Mobilinkd TNC3. I see from their website that they are now on to the TNC4, which I'm guessing has similar dimensions. Note that the model has a built in support for cleanly printing the side clip. I…
The Tremor Nail Clipper ( TNC ) is an innovative assistive technology ( AT ) to enable humans struggling with hand tremors to clip their nails independently, thus helping with the day to day life. It clamps onto most tables (thickness…
This is a case for the NinoTNC packet radio modem kit created by Nino KK4HEJ, see https://tarpn.net/t/nino-tnc/nino-tnc.html for information about that. The NinoTNC was born out of the TARPN ( Terrestrial Amateur Radio Packet Network )…
This mount fits the new printnc v4. Inner diameter: 65mm Should work with: - makita rt0700 - makita rt0702 Print Settings Printer Brand: Bambu Lab Printer: x1 carbon Supports: No Resolution: 0.2mm Infill: 60%
Easily attach the TNC4 to the back of an ID-52 (Plus) or IC-705. Print Settings These are my experimental settings thus far. Filament: PLA NOTE : T he original clip model suggests using PC Perimeters: 4 Supports: Required on the build…
I wanted a dust shoe that could have its height set independently of the Z movement so I came up with this. Video of it in action: https://www.youtube.com/watch?v=Cq3LlhZMwkM In the STEP file are two options for the shoe. One is 3D…
This is a cable grommet I designed in order to pass cabling & water lines from my PrintNC CNC machine to the pump & control box that are under the table surface. The part is designed for a ¾" or thicker table surface. You need to print…
This remix changes the mounting holes to a different pattern that it can be screwed straight to e.g. aluminium extrusions. For more information about the original model please take a look at…
My APRS Beacon setup with a Baofeng UV-5R and a Mobilinkd TNC kept falling over everytime I bumped it. This compact stand keeps it upright on my HT Shelf.
Printed in PETG. No supports needed. Print on 0.05 layer height to make it look nicer. Picture was 0.1 and I can still see some layer lines. You need the original screw from the back of the old transmitter
https://en.wikipedia.org/wiki/N_connector https://en.wikipedia.org/wiki/TNC_connector
https://wiki.printnc.info/en/mods/laser-attachment
The housing consists of four parts: top, bottom, front panel and back panel. There are two versions of the front panel, with text and without text. It was printing on creality K1 with rough surface PEI plate for better surface effect.…
The following are basic meshes of steel plates that could substitute the Alu parts proscribed in the build for the PrintNC. The 6mm thick steel tram plate requires that the back of the Spindle clamp is also drilled. I recommend test…
This design can hold Nino TNC and Raspberry Pi Zero in a single tray. This tray fits https://www.printables.com/model/1173286-microlab-mini-modular-home-server-rack Mounting: NinoTNC - M3 Screw Raspberry Pi Zero - M2.5 Screw
Work In Progress - more options available soon. When you have many NinoTNCs they can be tuned for different baud rates and work on different bands. Tags help to identify baud rate, mode, and band. They are to be used with standard NinoTNc…
Hey, Just put the original USB cable in and charge your JBL E65 BTNC on your desktop.
0.5U Server Tray for the NinoTNC to fit in 6" or 10" server racks. Adapted from the Microlab - Mini Modular Home Server Rack by CB4D. This rack provides rear facing placement of the NinoTNC to access the DB9 and USB ports. Download as…
The front panel has two thicknesses in order that the LEDs should stick out the front as far as possible while making the thing strong enough to protect the NinoTNC. Use M2.5 screws, or similar size, to hold the NinoTNC to the base. The…
This is a 1.33U-high tray for a 10 inch rack, with space for 4x NinoTNCs + a Pi. The NinoTNCs need 15mm+6mm M3 brass spacers. The Pi needs 20mm spacers. The Pi and the NinoTNC have the same hole spacing and board width. The holes are for…
These parts fit a generic Diesel heater sold on Amazon under the OMT, Orion Motor Tech brand. It is thin and tall. The legs fit a 167mm base. There are also two parts in there to convert it for a top cover only or top and two sides. This…
This part uses 2x 8mm smooth rods; of at least 250mm, 4x LM8UU bearings, and at least 3 rod spacers with set screws, to stop the travel of the rods at desired heights. The air hose and nozzle had 1/2" threading. End users might have to…
Case for dsTNC modem. For information about dsTNC modem see http://sp9uob.verox.pl/dstncv2.html (in polish). Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Infill: 15% Category: Electronics
This is just a modified case. Nothing more can be said. It's better to have the TNC leds facing forward instead of upward, but not necessary.
Case for the NinoTNC BLE + OLED board by David Arthur https://github.com/mumrah/ninotnc-ble Features: access to DIP switches, test loops (5mm scope hooks), LEDs, pots and test button, access to BLE board reset button, access to Pico micro…
A simple protective cover/case for the Mobilink TNC series. Made to protect the button from being accidentally pressed to turn it on/off by mistake. Holes made to allow light from the LEDs to be visible, and make it easy to remove the…
Introducing the 1u Rack for mounting the BLE adapter board and NinoTNC. 1u Rack tray is designed to fit the Microlab Mini Modular Home Server Rack. Has holes on the base to accept threaded inserts and holes behind the front bezel to…
