Liczymy pasujące modele…
Reconfigure your Nerf Pro Torrent! [Scroll to the bottom for updated parts and changelogs] I am a big fan of the Nerf Pro Torrent; but know that it may not be to everyone’s liking. I am incredibly excited to introduce my latest project -…
As seen on the animated TV series Star Wars: The Clone Wars, the republic starfighter V-19 Torrent swoops in to defend its cruiser from a separatist attack! Help fend off those damned clankers by flying your very own! My other Star Wars…
Nerf’s Pro half-dart blaster line didn’t get off to the best of starts. Despite that, I’m a big fan of the Torrent; with a couple of internal modifications, it becomes a very decent, compact, 150fps, pump-action springer! If, like me, you…
Replica of a V-19 Torrent Starfighter as seen in Clone Wars. The wings are print-in-place and can fold down for flight and fold up for landing. The scale is 1:270. Dimensions are 46.8mm wide, 25.2mm long and 16.7mm high (wings in “print”…
Update : Added STEP files Design I have tried to make this as simple as possible to print. The only part that needs supports is the main case. I use Tree - Organic supports as they are easy to remove and don't take long to print. All the…
Hello everyone! This is an angled picatinny foregrip inspired by the foregrip on the Nerf Pro Torrent. I designed this for use with GP3D's beautiful Pump Kit for the Nerf Pro Torrent, but it should work on any standard picatinny rail. I…
This is a follow-on and update to my previous Torrent pump kit, which can be found HERE . Based off of the work of Reddit user u/XM1-mark4 (Their Printables page); this kit replaces the Torrent’s large single-body priming slide with a…
There is the revised grip itself, the Ontos-specific inner part, and the tight fit nut.
Hello everyone! This is a 3D printed replacement dart pusher/breech for the Nerf Pro Torrent that allows for magazine swapping without needing to prime the blaster. While you can load and unload a magazine in a stock Torrent without…
Hello everyone! This is a 3D printed stock for the Nerf Pro Torrent that I have designed to extend the length of the standard Torrent stock. I liked the look of the original stock, but I wasn’t pleased with the length, so I thought it…
A drop in replacement frontend for the Nerf Pro Torrent. This does not require any hardware, but does need a frontend piece and a collet. The barrel needs to be pushed in pretty hard to seat in the stock dart gate. Low profile Collet can…
Hello everyone! This is a 3D printed stock for the Nerf Pro Torrent that I have designed to extend the length of the standard Torrent stock. I liked the look of the original stock, but I wasn’t pleased with the length, so I thought it…
This is a custom fan sled design to handle the problem of the provided metal fan sled with the Fractal Design Torrent not accommodating the massive Arctic Liquid Freezer II 420mm AIO's thick radiator. Without this, the radiator sits on…
I upgraded cases and realized I couldn't use an AIO with the Torrent case. So I designed a bracket to mount the AIO to the front 180mm fans. It seems to work well. I designed it to print with supports on build plate only. I would also…
Hello everyone! This is a version of my Medium Length Nerf Torrent stock that is compatible with buffer tubes. Beneto contacted me and asked if there was a version of any of my Torrent stocks that was compatible with buffer tubes, and at…
Hello everyone! This is my remix of GP3D's beautiful Nerf Pro Torrent Pump Kit that allows it to be used with a Classic Epicxxx Rev 2 EX BCAR as well as with my 3D printed Torrent Stocks . I absolutely love GP3D’s aesthetic stylings, so…
This lovely AFG with tightened tolerances for a tighter fit on the lynx priming block.
Fractal Design Torrent bottom fan mount for front AIO / radiator (maximum radiator length supported is 420 mm x 120 mm x 40 mm) baseplate support 2x 180 mm fans and up to 3x 360 mm fans ***Doesn't support 140 mm fans. The reason is, not…
This is a Power Supply Air Duct for the Fractal Design Torrent. I faced the problem that the Torrent is an amazing case but with a RTX 4090 and a hungry CPU all the hot air gets sucked right into the powersupply making it the loudest…
This 3D printable USB hub enclosure is designed to enhance your workspace by combining functionality and style. Inspired by the iconic design of the Fractal Torrent PC case, this enclosure hides your USB hub and unsightly adapters, giving…
Headphones hook that locks to the frontal panel of a Fractal Torrent Nano case. The hook stays in place by friction and requires an 8mm stainless steel rod around 65mm long, (like the ones used to build 3d printers). I've printed mine…
UPDATE 15.11.2013: Check out the slim version to fit a bit bigger GPUs: https://www.printables.com/de/model/648535-slim-fractaldesign-torrent-rad-adapter It is designed to be mounted to a 280mm Radiator and then with long enougth screws…
Hello everyone! This is a 3D printed stocks for the Nerf Pro Torrent that I have designed to closely resemble the look and feel of the standard stock. I liked the look of the original stock, but I wanted to be able to have more…
This bottle opener was created to open a special lid on a bottle used with the IonTorrent S5 Genexus system used in genetic sequencing laboratories. It was printed with a Prusa MK3S+ using a 0.4mm brass nozzle. The model was made from…
I generated a 4 color STL of the Midnight Blue Torrential Knight with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you…
It's no secret Nerf's Torrent has some issues. For the past year or so, I've been taking it to games so I can find and fix all of them. There was one persistent issue that had me stumped for months: the Torrent would be shooting fine,…
Prints in two pieces m3x25mm, with standard black oxide 3mm washers Uses E-Z LOK Threaded Insert for Plastic Tapered Single Vane Brass Thread Inserts size M3-0.5
You’ll smell it before you see it, and by then, you’re already drowning in it. It’s not just mud and muck; it’s the metaphysical grease of a thousand broken promises, dredged straight up from the plumbing of The Sink. I’ve seen a warband…
This centrifuge plate was created to hold a special proprietary tube strips that are used with the IonTorrent S5 Genexus system. The tube strips do not fit into any known existing centrifuge plates due to the strip size and tube shapes.…
This is a replacement grip I made to improve the feel of the Buzz Bee Torrent. I’ve always loved the look and function of the Buzz Bee Torrent, and a while back I found one for a good price, so I decided to pick it up. Now, having only…
This is a replacement pump grip I made to improve the feel of the Buzz Bee Torrent. I’ve always loved the look and function of the Buzz Bee Torrent, and a while back I found one for a good price, so I decided to pick it up. Now, having…
I disliked the original trigger, so I made a new one myself that I believe is better, or at least, it "feels" better, you will need to print it in its original parameters, in this case it would be 5 walls 100% infill.
This is a modification part I’ve made to improve the feel of the Buzz Bee Torrent. I’ve always loved the look and function of the Buzz Bee Torrent, and a while back I found one for a good price, so I decided to pick it up. I decided I…
It is designed to be mounted to a 280mm Radiator and then with long enougth screws through the front of the case and the fans into the radiator. The Adapter and fans will be mounted with those screws and the rad will be mounted to the…
GPU support for MSI 5090 Vanguard for the case Fractal Torrent. Might fit other MSI 50XX models too. The thumbscrews are M3x12 mm. The screws for the bottom part that mounts into the chassi are standard self tapping fan screws used for…
Just the basic adapter to work from for making a bracket for a Tenstorrent e150 AI card to get a fan snugly against the back of the card. It is HIGHLY recommended to print this in something like ABS which has a very high heat tolerance as…
I disliked the original position of the little pwm hub in my fractal torrent since I would have to cramp a lot of cables in the bottom left of the case, so I decided to mount it in the center, where one 3.5" HDD cage used to be. This is a…
Just the basic adapter to work from for making a bracket for a Tenstorrent e75 AI card to get a fan snugly against the back of the card and fit within the Supermicro SC505 case. I'm assuming you've got 40x40x20mm fans lining the back of…
Hallo! Das ist ein Propsaver für den Blade Torrent 110. Ich habe ihn in PLA mit einer 0,5mm Nozle gedruckt. Nachträglich wurde noch ein Loch für die Motorwelle hinzugefügt. Viel Spaß damit. Lg, Tobi Category: R/C Vehicles
This design adds silly scar capability for the needle nose pump kit version for Torrent users who use the original stock barrel. * You may have to change the orientation of the adapter to print better in some directions.
uTorrent Cherry MX Keycap Printed with White and Green
Made my thifted Nerf Torrent Pro a little bit more TACTI-COOL & Game Ready... but also keeping it SIMPLE! I already have an RS2 (really enjoyed Beta testing that one), and one upgraded using Gemeneyes remix of GP's great pump kit (called…
Provides a sling mount for the Nerf Pro Torrent by using the deprime space in the back when the deprime is removed. Requires the blaster to be modified. The reason I created this was that I wanted a sling mount for the torrent, but it…
This grip attaches directly to the lever inside the pump grip, so it doesn't get jammed up as easily. It's also a bit bigger so you can fit more than two fingers on the grip. Hardware required is 4x m3 nuts and 4x m3x25 socket head…
The original Nerf Torrent has a safety switch that prevents the trigger from being pulled. The RS2 however does not have a safety switch. It is a decently strong blaster that can still take an eye out if someone isn't wearing proper eye…
Torrent Chunky Collet Much stronger than the original.
The modular, versatile, open-source eDNA sampler to maximize detection and minimize complexity The OMNIeDNA sampler is a modular environmental DNA (eDNA) concentration system built around a standard 50 mm cotton swab pad secured within a…
Seattle Torrent PWHL team golf ball marker (25mm diameter by 2mm height and a 10mm spike). Two file versions included (embossed cut for painting and multifilament version). Usage Place on the green to mark your golf balls location when it…
Reconfigure your Nerf Pro Torrent! [Scroll to the bottom for updated parts and changelogs] I am a big fan of the Nerf Pro Torrent; but know that it may not be to everyone’s liking. I am incredibly excited to introduce my latest project -…
My intention was to make a flat top surface to be able to place my monitor onto my fractal torrent pc case. This is my first design, please print with a grain of salt.
This is a replacement grip I made to improve the feel of the Buzz Bee Torrent. I’ve always loved the look and function of the Buzz Bee Torrent, and a while back I found one for a good price, so I decided to pick it up. Now, having only…
This adds an alternate version of the rail replacement that is compatible with nose replacements that mounted like the original Nerf piece. I've also added rollers that can be used if you remove the ratcheting mechanism in the lower half…
Uses Silly's Collet https://www.printables.com/model/874058-barrel-muzzle-collet-for-the-tc-tcu-cb-and-cbu
The connector needs to be printed parallel to the bed with a small raft. Assembly might require some force the first time, I suggest using glue to keep the parts together without wobbling in the long term.
I really like the Torrent RS2, but there was one thing I had to change. I wanted just a few more picatinny teeth. This is a simple remix which adds more teeth to the front and back. It is the same overall size and should fit normally.
The adapter is converting Rival Rail to Picatinny Rail. It uses the original model and makes the size perfect for the Nerf Pro Torrent. Requirements: None, but 3D Printer Printing: 20-25% Infill, 3-4 Walls.
Preface This is a case mod I made a year or two ago that I haven't gotten around to publishing. Mainly due to it being a bit unfinished. The fit of the parts is not that great. I tried my best, but i only had a two pairs of calipers to…
Provides a hole cover for the Nerf ProNerf Pro magazine because I don't like the way it looks with the hole. It provides a better look. Print Settings: 4-5 Walls, 25% infill.
Removed 40mm from the stock to help make it easier to shoulder. Prints in the same orientation as the original.
My intention was to make a flat top surface to be able to place my monitor onto my fractal torrent pc case. This is my first design, please print with a grain of salt.
This is a mounting platform and sign bracket for the V-19-Torrent kit card by Nakozen available at https://www.printables.com/prints/143196 These parts are designed to attach to a 3UDC pivot arm so that you can present this model anyplace…
I have included files for texture all around the part as well as files for texture only on the front
I used a couple of different files found from StawiamKlocki.pl designs. I modified the base so that it is wider to support the two arms needed to hold up the torrent. There are no spaces for minifigs or a nameplate, as I wanted more of a…
Fractal Torrent full tower Sensor panel Accommodate waveshare 5 in raspberry pi monitor It use the original gpu bracket provided with the case Put the screen on the pins, put slide-in cylinder over the pins intall back cover with 4 fan…
Fractal design torrent fan bracket hole cover can be printed in TPU and act like a grommet with embedded Fractal design Logo
Just the basic adapter to work from for making a bracket for a Tenstorrent e75 AI card to get a fan snugly against the back of the card. It is HIGHLY recommended to print this in something like ABS which has a very high heat tolerance as…
Fan shroud adapter for the Tenstorrent e75 card with dual 40mm fan mounts
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
This adapts the Silybutts collet to the Nerf Pro Torrent. It also optionally eliminates the questionably useful top rail. It is not listed as a Remix due to the interface not accepting the source URL.
I smashed Redcowls front end with Leedle's hardware-less bcar and here we are. So far it works great. You want a barrel that protrudes from the front end 31mm for the best results.
This model lets you quickly swap barrels using the Silly Collet and an O16 O-ring. The model also features a Picatinny rail instead of the Nerf Rival rail allowing for more customization with sights and optics.
