P
Printablespastaoceanfrog
Skadis - Knipex Pliers - Electronic Super Knips
Small mount for holding Knipex Super Knips pliers on the IKEA Skadis. Easy printing. Support recommended.
- Pobrania
- 1188
- Polubienia
- 149
- Ocena
- 4,83
Wyniki wyszukiwania: tronic
Liczymy pasujące modele…
P
PrintablesPetr75
Battery cover for Electronica - LR44
Printed with PLA, nozzle 0.4mm, layer height 0.15mm. Included G-code is from Prusa Slicer for MK3S printer. Satin Powder-coated Sheet by Prusa3D.com used for print.
- Pobrania
- 85
- Polubienia
- 7
- Ocena
- 0
P
PrintablesZbyněk Král
TOPEX Vice Jaws for electronics
Print instructions: I recommend printing from PETG. To strengthen the area around the nuts, I adjusted the print using modifiers. Please see the attached 3MF file for detailed print settings. Supports are necessary. Parts list: Printed…
- Pobrania
- 75
- Polubienia
- 10
- Ocena
- 0
P
PrintablesJoseph Craig
TaoTronics-Ultrasonic-Cool-Mist-Humidifier Replacement Duct
Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…
- Pobrania
- 70
- Polubienia
- 6
- Ocena
- 0
P
PrintablesFARI Brussels
Low profile screen stands for Beetronics screen
The “connectors” option from Prusa slicer was used, but i suggest removing a bit of the side thickness from the connectors with a sharp knife to be sure the two parts fit well togheter.
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
Printablespb-tec
Customizable parametric stable and waterproof electronics ip65 ip67 project box enclosure case housing
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
- Pobrania
- 13 538
- Polubienia
- 1529
- Ocena
- 4,94
P
Printablesrvaccaro
Lamp Bulb Idea Electronic Circuit wall art
Try printing at 80% of speed and very hot bed (75° ?) Best R
- Pobrania
- 7779
- Polubienia
- 2738
- Ocena
- 4,89
P
Printablesorax
Spudger Set (Electronic Disassembly Tools)
Following a discussion I had with @ThatMakerKid, I wanted to create my own set of 3d printed spudger tools inspired by the iFixit spudger designs but with a geometry better suited for FDM printing. I decided to create 3 models to achieve…
- Pobrania
- 5463
- Polubienia
- 859
- Ocena
- 4,95
P
Printablespb-tec
Easy customizable / parametric electronics project box case enclosure housing by pbtec
Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…
- Pobrania
- 4382
- Polubienia
- 455
- Ocena
- 5
P
PrintablesTamiyaGuy
Magnetic Connector for Electronic Projects
Features A magnetic connector for low-powered, removable electrical connections Fits two 6 x 2mm neodymium magnets (Edit: Added files for 6 x 3mm, 5 x 2mm and 5 x 3mm) Compact and easy to build into your models - roughly 10mm tall and…
- Pobrania
- 3718
- Polubienia
- 5171
- Ocena
- 4,88
P
PrintablesMordemot
Modular drawer for electronic components (Vase mode)
Other desings similar to this were not perfect for me, so I designed my own version. It was created to be a fast print in vase mode so when u have a new component you can quickly print drawer for it. I use a 0.6mm nozzle and high layer…
- Pobrania
- 3242
- Polubienia
- 698
- Ocena
- 4,63
P
PrintablesWill Cogley
Animatronic Eye Mechanism ε3.2
The design can be entirely 3D printed and can use hobby electronics components. However I would recommend using Will Cogley’s animatronic compatible eyes and the dedicated EyeMech controller board available for purchase through…
- Pobrania
- 3100
- Polubienia
- 524
- Ocena
- 4,83
P
PrintablesIconic FAB
The RIG (R1.1) — DIY helper stand for testing electronic components
ABOUT THE RIG The Rig is mostly printed DIY helper stand for testing electronic components in an easy and accessible way. This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing. The rig…
- Pobrania
- 3060
- Polubienia
- 2035
- Ocena
- 4,88
P
PrintablesM4NU
Precision Tweezers (Electronics & Clockwork)
A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested
- Pobrania
- 2881
- Polubienia
- 530
- Ocena
- 4,79
P
PrintablesFix Daily
Atorch DL24 Electronic Load case
(The links below are affiliate links. I may earn a commission at no extra cost to you, helping keep my work free and continuously improving my designs.) This case is meant for this Electronic Load:…
- Pobrania
- 2849
- Polubienia
- 235
- Ocena
- 4,94
P
PrintablesChrlee
Modular stand for electronic microscope
This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…
- Pobrania
- 2422
- Polubienia
- 361
- Ocena
- 4,94
P
Printablesthe freewheeler
Prusa MINI Z-Top | Electronics Box Lid
Prusa MINI/MINI+ ‘Z-TOP’ The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis and replaces the lid of the stock…
- Pobrania
- 2192
- Polubienia
- 548
- Ocena
- 4,92
P
PrintablesDema_Design
Electronic Dice
Recommended layer height 0.15mm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09/05/2022 Electric dice REV1 d6 layout correction
- Pobrania
- 2083
- Polubienia
- 484
- Ocena
- 4,85
P
PrintablesHendrikxWorkshop
Animatronic FNAF Bonnie
Let´s build it! Animatronic FNAF Bonnie Video Part 1 - https://youtu.be/sBMSrNnxWrI Video Part 2 - https://youtu.be/6_IwNrdvX1I Video Part 3 - https://youtu.be/xwtQQssEBv4 List of parts- Check videos description Help me keep creating…
- Pobrania
- 2041
- Polubienia
- 301
- Ocena
- 5
P
PrintablesRetromanIE
Brain Electronic Circuit - Wall Art (Larger - With CPU)
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
- Pobrania
- 1885
- Polubienia
- 521
- Ocena
- 4,8
P
Printables3Dmonios
Electronics Schematic Stencil (Credit Card Size)
A wallet-sized stencil for quickly drawing electronic schematics. Includes resistor, capacitor, inductor, LED, switch, ground, voltage source and junction symbols. Perfect for students, engineers, makers and hobbyists
- Pobrania
- 1821
- Polubienia
- 973
- Ocena
- 5
P
PrintablesChristianSch
Snaptronics – Solder-free electric circuit construction kit
Snaptronics gives you a bunch of solder-free 3d-printed bricks to build various basic circuits in a breeze on a magnetic snap-fit basis.
- Pobrania
- 1654
- Polubienia
- 820
- Ocena
- 5
P
PrintablesJbravo88
Brain Electronic Circuit remix
Just a remix to add some detail https://www.printables.com/model/117363-brain-electronic-circuit-wall-art/remixes I printed this with the Revo .25 nozzle in 3 and 4 colors. Print time took 4+ hrs no brim let it completely cool before…
- Pobrania
- 1623
- Polubienia
- 579
- Ocena
- 5
P
PrintablesThreeAttic1
All Original Ball Joint Animatronics
I a ball joint foxy (https://www.thingiverse.com/thing:1112196) but couldn't really find any of the other animatronics using ball joints (besides a "grim" foxy). So, I decide to make them. If you have found models of other animatronics I…
- Pobrania
- 1599
- Polubienia
- 151
- Ocena
- 5
P
PrintablesThomas Desloovere
Electronics parametric box V2
Version 2.0 Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full control over dimensions and…
- Pobrania
- 1486
- Polubienia
- 343
- Ocena
- 5
P
Printablesmranton
Electronics Sorter Box with IKEA SKADIS mount
This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…
- Pobrania
- 1470
- Polubienia
- 488
- Ocena
- 5
P
PrintablesTeachingTech
Ender 3 all in one, universal rear electronics case
A rear mounted electronics case for the Ender 3. At the back, there is room to mount a Raspberry Pi, fan, buck converter and two relays on the left. On the right, either the standard board with four TL smoothers or an MKS Gen L or SKR1.3.…
- Pobrania
- 1372
- Polubienia
- 261
- Ocena
- 4,47
P
Printablesroblpetty
Ender 3 V2 External Electronics box (MeanWell PSU and Motherboard) Improved
IMPORTANT : this model is about 20mm longer than the ender 3v2 print bed. So you will need to print this on a different machine or alter the model before printing. If you don't want to do that you can take a look at my original version…
- Pobrania
- 1358
- Polubienia
- 282
- Ocena
- 5
P
Printablespix3l8e
Ohm's Law Circle Cheat Sheet - Electronics
Handy Cheat Sheet for calculating Volts, Amperes, Watts and Ohms using just two variables. Fusion360 design added for you to improve upon. Please share your feedback and comments :-)
- Pobrania
- 1114
- Polubienia
- 468
- Ocena
- 4,92
P
PrintablesUF_Icarus
Prying Tools for Electronics (Spudgers)
Safely pry into electronics for repairs and service. You're likely to damage these prints before you damage your devices, but of course exercise caution why prying into expensive things and always make sure they're turned off before you…
- Pobrania
- 1068
- Polubienia
- 88
- Ocena
- 4,86
P
Printablessgsunder
External Electronics Box for Ender-3 Pro
This box is designed for the following components: - SKR Mini E3 or stock Creality mainboard - Raspberry Pi 3B/3B+ - Stock Ender-3 Meanwell PSU - Stock LCD Screen Mounting: - The box mounts onto the PSU fan screw area. The PSU fan will…
- Pobrania
- 987
- Polubienia
- 175
- Ocena
- 4,33
P
PrintablesSquirrelbrain
RatRig V-Minion Electronics Enclosure
Rear mounted Enclosure for the V-Minion compatible with the SKR2, SKR E3 MINI V3, SKR PICO. Using this enclosure will require the use of a custom Y endstop mount, which mounts on top of the extrusion rather than the side. SKR2 SKR E3 MINI…
- Pobrania
- 971
- Polubienia
- 189
- Ocena
- 5
P
Printablespb-tec
Easy parametric box / enclosure for electronic projects
Easy box for electronic projects by pbtec There is a newer Version available. See https://www.printables.com/model/863273-easy-customizable-openscad-electronic-project-box Use Openscad customizer (Menu Window/unselect "hide customizer")…
- Pobrania
- 926
- Polubienia
- 91
- Ocena
- 5
P
PrintablesRasmus Additive
Boxes for diy electronics projects
The box is not 100% watertight but does have a pretty good seal with the stepped way the lid screws on. All you need is 4*m4 screws
- Pobrania
- 908
- Polubienia
- 97
- Ocena
- 0
P
PrintablesTamiyaGuy
3-Pin Magnetic Connector for Electronic Projects
Features A 3-pin version of my magnetic connector for low-powered, removable electrical connections Fits various sizes of magnets from 5 x 2mm up to 10 x 3mm Compact and easy to build into your models - the 6mm version is roughly 10mm…
- Pobrania
- 834
- Polubienia
- 1121
- Ocena
- 5
P
PrintablesLuoti
Oral-B electronic toothbrush travel case box
I didn't find a travel box for the same kind of toothbrush that I have, so I made one. The brush snaps to the case by the neck and is easy to remove by hitting it to your hand. The top also snaps to the case. I neede these fast so had to…
- Pobrania
- 832
- Polubienia
- 113
- Ocena
- 5
P
Printablesroblpetty
Ender 3 V2 External Electronics box (MeanWell PSU and Motherboard)
Updated version can be found here: https://www.printables.com/model/201359-ender-3-v2-external-electronics-box-meanwell-psu-a Created electronics box for the MeanWell PSU and Ender 3 V2 motherboard so I could keep it outside of my…
- Pobrania
- 820
- Polubienia
- 110
- Ocena
- 0
P
PrintablesThomas Desloovere
Electronics parametric box OLD VERSION V2 Available on my profile
OLD VERSION V2 Available on my profile Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full…
- Pobrania
- 814
- Polubienia
- 203
- Ocena
- 4
P
PrintablesJustin
Sabine Wren Cosplay Helmet (w/ electronics and paint lines)
This was my first attempt at a helmet. I made it for my daughters' Halloween costume, because I wasn't happy with the designs I could find (including paid designs) and we really wanted a working sight with blinky lights. I've included a…
- Pobrania
- 787
- Polubienia
- 119
- Ocena
- 5
P
PrintablesAbbLabb
Animatronic Terminator Eye
Eye with dilating pupil powered by a 2g micro servo: https://www.aliexpress.com/item/1005002973104855.html Will update with additional mounting for use in OneIdMonSTR's anmatronic skull project. It's still a work in progress and fiddly to…
- Pobrania
- 780
- Polubienia
- 220
- Ocena
- 0
P
PrintablesWiseone
Atorch DL24 Electronic Load module Case
This project takes an Atorch DL24 Electronic Load module and makes some minor modifications to it and encloses it into a custom 3D printed enclosure to provide improved handling and board protection. The project also converts the DL24…
- Pobrania
- 775
- Polubienia
- 51
- Ocena
- 4
P
PrintablesDino
Small-Parts organizer box (Electronics, screws etc.)
Build instructions You can either slice it yourself or used gcode that I uploaded. Have in mind that every printer is different hence has different optimal print settings. Printing labels I uploaded a DWG file with properly sized labels…
- Pobrania
- 760
- Polubienia
- 104
- Ocena
- 5
P
PrintablesJB3Designs
3D Printer Electronics Enclosure
NEW VERSION 4.0 This is a large modular electronics enclosure for 3D printers. It's big enough (depending on controller board size) to hold the controller board, a Raspberry Pi, and other electronics. It is not designed to hold the PSU.…
- Pobrania
- 758
- Polubienia
- 104
- Ocena
- 5
P
PrintablesFizzy
FT EMS Voron V0.2 V2 (Electronics Management System)
INTRODUCTION This is version 2 of the design backporting all the learnings from the release of EMS 300/350. The frustration of using VHB tape mounted to a printed piece emulating a DIN rail with yet another printed mount for each of the…
- Pobrania
- 757
- Polubienia
- 151
- Ocena
- 5
P
PrintablesAppendix_pi
Stackable drawers for electronics components and small parts
I needed a drawers for my electronics and small parts. I could have bought it but why If I can design and print it by myself? This design was born out of the need of something that I could keep on my desk, practical and easy to access…
- Pobrania
- 753
- Polubienia
- 127
- Ocena
- 4,5
P
PrintablesMagnus Olsson
Ender 3 Electronics Box
I have been looking for a electronics box that has the lid on the underside of the printer but I have not found one so I made one myself. I have include the cad files so you can make it your own if you want. Whats in the box? 1 Raspberry…
- Pobrania
- 752
- Polubienia
- 143
- Ocena
- 5
P
PrintablesFuméeBleue
Electronic project box
Electronic box/enclosure fully customizable Updated V1.01 : Add vents Updated - V1.02 : Add invert option Footbox length update Vents update (logo) Use screw_holes.scad librarie https://www.thingiverse.com/thing:1731893 Updated - V1.03 :…
- Pobrania
- 745
- Polubienia
- 67
- Ocena
- 5
P
PrintablesNimrod Galor
Motion Follow Eye Animatronics
Motion Follow Eye Animatronics. This Arduino project uses an Optical Flow Sensor (ADNS3080) to capture movement. Then translate the data to move servo's making it look as eyes are following moving object. full project:…
- Pobrania
- 716
- Polubienia
- 132
- Ocena
- 0
P
PrintablesTech-AG
Organizer for electronic components
Attention! Print preparation is only available for STEP format model. STL model is for viewing only. Only when printing from STEP format can you achieve the stated characteristics! An organizer for mobile storage of radio components and…
- Pobrania
- 712
- Polubienia
- 236
- Ocena
- 5
P
PrintablesAdam
Electronics opening tools
The thinnest part of the opening pick is 0.3 mm. The spudger is 0.5 mm. Printing: Opening pick: 0.1mm layer height, 100% infill. For the other ones just default settings.
- Pobrania
- 709
- Polubienia
- 81
- Ocena
- 5
P
PrintablesRetromanIE
Heart Electronic Circuit - Wall Art (Larger - With CPU)
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
- Pobrania
- 704
- Polubienia
- 204
- Ocena
- 4,9
P
Printableskageiit
Ender 3 Pro Voron Themed Electronics Enclosure
After trying various electronics enclosures for my Ender 3 Pro, I was not happy with many of them due to various issues with each Fit was tight and not very forgiving for running cables Airflow/cable management were usually afterthoughts…
- Pobrania
- 702
- Polubienia
- 213
- Ocena
- 4,86
P
PrintablesZachar Čuřík
Atorch DL24 Electronic Load Case
Atorch DL24 150W Electronic Load Case For the newer version that can be powered by a 5V USB-C power supply . The top cover can be installed without having to disassemble the heatsink with fan and re-paste the transistor - The top cover…
- Pobrania
- 694
- Polubienia
- 60
- Ocena
- 5
P
PrintablesJose H
Mini portable electronics workshop
Various layouts to organize components and tools to keep everything close by so you can make repairs without leaving the table Print instructions Un pequeño taller para poder trabajar en el salón de tu casa sin quemar nada y teniendo…
- Pobrania
- 687
- Polubienia
- 176
- Ocena
- 0
P
PrintablesIK5
Device/Electronics desktop organizer
a cool all in 1 desktop device organizer for airpods, iphone and smart watch. This also allows you to charge your devices while in the stand.
- Pobrania
- 684
- Polubienia
- 146
- Ocena
- 0
P
PrintablesGalvanic
Ender 3 V2 Enclosure box electronics external case
Ender 3 V2 enclosure If you plan to make this, I don't take any liability if you hurt yourself, working with on open power supply can be deadly. If you are uncomfortable with the PSU open, keep the lid on and install it and see if it can…
- Pobrania
- 650
- Polubienia
- 143
- Ocena
- 5
P
Printablespedrolamas
Ender-3 V2 Front Electronics Housing
Based on the awesome work of Synyster1911 here: https://www.thingiverse.com/thing:4812842 UPDATED 03/09/2021: The "_v49" have the box lowered 2mm so that the covers are aligned with the extrusions, the rest is identical to the original…
- Pobrania
- 611
- Polubienia
- 180
- Ocena
- 4,6
P
PrintablesDoubleT
Voron Electronics - Dual UHP din bracket
These brackets can be used to hold two MeanWell UHP psus (usually one 24v and one 48v). Two versions are provided: one for UHP-200 models and one for UHP-350 models. I also included a modified version of the din rail mount which holds a…
- Pobrania
- 598
- Polubienia
- 157
- Ocena
- 5
P
Printablesilike2design
Ender 3, Ender 3 Pro Electronics Enclosure (Updated)
This enclosure is designed to hold all the electronics for the printer. It holds the MeanWell power supply, controller board (4.2.7), front control panel, Raspberry PI 4 and a buck converter to power Raspberry PI. Included in the files is…
- Pobrania
- 587
- Polubienia
- 242
- Ocena
- 4
P
Printablestippfehlr
Kosmos Experimentierkasten: Easy Elektro Start / Easy Electronic: replacement propeller
Images of printed part by me. Printed with eSun PLA+ orange filament. If this one breaks, I’ll print it from PETG for the added flexibility and longevity. I used normal cura supports for this, but I think tree supports also work.
- Pobrania
- 568
- Polubienia
- 19
- Ocena
- 4,67
P
PrintablesMinimaliz.me
Electronic components box
This 2-tier electronic components storage box is the ideal solution for storing and organizing your electronic components in an efficient and convenient way. It is equipped with two separate compartments for storing your spare parts,…
- Pobrania
- 563
- Polubienia
- 66
- Ocena
- 5
P
PrintablesN_F_B
Ender 3 v2 front electronics UPDATED
Updated design! Made for my specific needs, but you can enjoy it as well. Click here for the previous version. NEW: Place for the BTT 24v UPS Detachable back door for the wireing Exhaust fan 2 on/off switches Holes for cable management…
- Pobrania
- 557
- Polubienia
- 177
- Ocena
- 4,5
P
PrintablesToochainz
Customizable Electronics Enclosure
An OpenSCAD electronics enclosure designed to hold one rectangular PCB. The default settings are for the following: -PCB w/ 100mm x 40mm mounting hole spacing -SPAX #8 1 in. pan head screws for cover -M3-0.5 threaded heat set inserts for…
- Pobrania
- 541
- Polubienia
- 55
- Ocena
- 5
P
PrintablesFizzy
FT EMS V0.2 (Electronic Management System)
V2 (updated design) is available - https://www.printables.com/model/553387-ft-ems-voron-v02-v2-electronics-management-system INTRODUCTION The frustration of using VHB tape mounted to a printed piece emulating a DIN rail with yet another…
- Pobrania
- 533
- Polubienia
- 129
- Ocena
- 4,88
P
PrintablesHephaprint
Remix of the Eye animatronic (with creepy human face)
We modified a human head (from lehthanis) existing to make it receive eyes animatronics The body is empty to receive the mecanism and spare filement The Eye is our version for the animatronics. We bring some changes as described in the…
- Pobrania
- 525
- Polubienia
- 73
- Ocena
- 0
P
PrintablesAndy
Parametric Snap Fit Electronics Enclosure Box
Basic parametric snap fit electronics enclosure / box. Printable without supports. You can size as you like using user parameters in Fusion 360. F3D file supplied. When exporting STL / STEP, it will already be orientated ready for…
- Pobrania
- 523
- Polubienia
- 42
- Ocena
- 5
P
PrintablesKVEL
WERA electronics screwdriver holder
Simple holder for Wera electronic screwdrivers.
- Pobrania
- 517
- Polubienia
- 79
- Ocena
- 5
P
PrintablesGary
Tron Legacy Disc Display with base (and electronics)
This is a full model build of a Tron legacy disc desktop display including circuit python code to light it up. The Base was created to be printed on an MMU and I'll add a tutorial on how to create the whole piece shortly. I printed the…
- Pobrania
- 513
- Polubienia
- 133
- Ocena
- 5
P
PrintablesAprinta-me
"Brain Electronic circuit" in 4 pieces
I divided the Brain Electronic circuit wall art into 4 pieces so I could print it BIG in my 3d printer. I joined it and glued the “CPU” part on top of it to hide the joints.
- Pobrania
- 505
- Polubienia
- 119
- Ocena
- 4,5
P
PrintablesMillennium Machines Official
Millennium Universal CNC Electronics Box V1.0
⚡ Introducing the Millennium Machines Universal CNC Electronics Box The Universal CNC Electronics Box is designed to simplify, standardize, and streamline your CNC’s electronics setup—no matter which machine you’re running. Whether you’re…
- Pobrania
- 504
- Polubienia
- 69
- Ocena
- 0
P
PrintablesGWiz
Skully - Animatronic interactive robotic skull
My kids really enjoyed the VR game ‘Waltz of the Wizard’ by Aldin Software. It features a character called Skully with whom you can interact with and generally be unkindly towards. I had already finished a project by Joran to recreate one…
- Pobrania
- 488
- Polubienia
- 82
- Ocena
- 5
P
Printableswerz 99
Electronic Enclosure
Electronic Enclosure Master Template by Andreas Spiess: https://github.com/SensorsIot/Project-Box-Templates Great Idea To have a Paramteric Master for Project Boxes you can vary quickly! Thanks a lot! Youtube:
- Pobrania
- 475
- Polubienia
- 44
- Ocena
- 5
P
PrintablesBob
Toyota / Ford hybrid Electronic Continuously Variable Transmission (E-CVT) model
Last changed : 18-07-2026 Simple model of the E-CVT used by Toyota and Ford in their vehicles, for example the Toyota Prius and Ford Maverick. This transmission uses a planetary gear set combined with electric motors to achieve an…
- Pobrania
- 475
- Polubienia
- 41
- Ocena
- 5
P
PrintablesJLS
Sovol SV08 Electronics Cover
With this mod, there are several opportunities for mounting various fans up to 180x180, its made of 2 separate parts, that fit using M3 bolts/nuts. If you validate this mod, or have any suggestions or improvements, please let me know.…
- Pobrania
- 462
- Polubienia
- 93
- Ocena
- 4,6
P
Printablesdikman
Stackable electronics mini - rack
rack suitable for network switches up to 8 ports
- Pobrania
- 461
- Polubienia
- 81
- Ocena
- 5
P
PrintablesPhilippe Lacoude
3D-Printed Electronic Snowflakes using WS2811 LED Strip
Instructions are in the PDF document and in the YouTube video Printing the branches The snowflake consists of SIX branches. A branch is contained in the Snowflake.stl STL model and in the Snowflake.3mf 3MF file. Print SIX copies of the…
- Pobrania
- 458
- Polubienia
- 108
- Ocena
- 5
P
Printablesnouzamarek
Albi Magic reading Electronic pencil.
Albi Magic reading Electronic pencil. This is a binder for different sizes of books and old and new pencils.
- Pobrania
- 449
- Polubienia
- 21
- Ocena
- 5
P
PrintablesPiddey
Oral-B Electronic Toothbrush Stand with integrated charger - REMIX
Remix of the fantastic design by matman_m: https://www.thingiverse.com/thing:3505890 -> created various versions from 2 to 6 brushes -> starting with the 3-brush-version, there are also dual-charge versions Available as .STL and .3MF…
- Pobrania
- 446
- Polubienia
- 61
- Ocena
- 5
P
PrintablesDiplomator
FLSUN V400 LED Triangle - Electronic Bay Cover
I design a Electronic Bay Cover with LED Light Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Its a heavy…
- Pobrania
- 443
- Polubienia
- 105
- Ocena
- 5
P
PrintablesFilip Honzárek
TC Electronic G-Major Triple-C Encoder Knobs
Inner and outer knobs for TC Electronic G-Major 1 and Triple-C devices. Possibly to fit other devices from TC. Inner knob has clearance versions. Every 3D printer has different possibility about precision, so I created clearance files…
- Pobrania
- 435
- Polubienia
- 16
- Ocena
- 5
P
PrintablesHendrikxWorkshop
Animatronic Eye
Let´s build it! 3D printed animatronic 51mm eye mechanism. Video - https://youtu.be/niRxJR1zGrg List of parts- 2x - Servo MG90D - s.click.aliexpress.com/e/_9Aj5xd 1x - Servo MG996R - s.click.aliexpress.com/e/_9xSPmB 6x - Linkage Stoppers…
- Pobrania
- 435
- Polubienia
- 83
- Ocena
- 0
P
PrintablesPaul6700
Three-Servo Animatronic Eye
Simple three-servo mechanism of eyes looking left and right and blinking. There is a build video on my YouTube Channel. Free to use, please share your versions and builds. There is a vacuum form buck for the eyeball lens. A one mm sheet…
- Pobrania
- 432
- Polubienia
- 53
- Ocena
- 5
P
Printablesder_kellermann
Small Electronics Box 50mm
This is a small 50mm by 50mm box, that can be mounted to the wall. I used it to house some WAGO connectors. Print instructions Category: Organization Summary This is a small 50mm by 50mm box, that can be mounted to the wall. I used it to…
- Pobrania
- 430
- Polubienia
- 29
- Ocena
- 5
P
PrintablesPomi
Battery cover for Electronica (Электроника ИМ) game
Description Replacement for battery cover for Soviet electronic games (Электроника ИМ - clone of Nintendo Game & Watch ). Can be used for all game device, e.g. : NU, POGODI! / НУ, ПОГОДИ! TAJNY OKEANA / ТАЙНЫ ОКЕАНА VESJOLYJ POVAR /…
- Pobrania
- 426
- Polubienia
- 32
- Ocena
- 5
P
PrintablesTestoMane
Infinity Cube Light Flat Electronic Base
A base for the Infinity Cube Lamp (i used the Snap-fit Infinity Cube Light (No Glue) von DieselRabbit) and WEMOS D1 mini. I implemented a 5V connector because my lamp has 156 LED, which needs approx. 50W for full brightness . Which equals…
- Pobrania
- 425
- Polubienia
- 259
- Ocena
- 5
P
PrintablesCL Performance
Voron Trident inverted electronics "Slip in" - Brackets
Sometimes it is a bit hard to place the black cover on the bottom of the printer. With these brackets, you have an easy way to slip the cover at the right position. Even with the CNC kit mounted. Here is an example how to use it: You just…
- Pobrania
- 421
- Polubienia
- 89
- Ocena
- 5
P
Printablessami
ender 3 electronics fan
fan for silent and safe printer
- Pobrania
- 418
- Polubienia
- 72
- Ocena
- 4,75
P
PrintablesBrent
Taller stackable electronics mini - rack
I really liked the stackable electronics mini - rack but it wasn't tall enough to fit the mini PCs I needed to put on it. This is a remix that is 25mm taller. It is the same length and width so you can stack the originals and this taller…
- Pobrania
- 417
- Polubienia
- 56
- Ocena
- 5
P
Printableszbuser
Alesis Electronic Drum Clamp Mount
This drum mount is sized for any Alesis brand electronic drumset. its made to clamp a 38mm tube on the big clamp and a 19mm tube on the small one. It is printed in two parts and epoxied together so that each clamp can have the optimal…
- Pobrania
- 411
- Polubienia
- 49
- Ocena
- 5
P
PrintablesXaok Koaxinger
Heart Electronic Circuit - Wall Art - with background
i did insert magnets in the cpu block and the holes around to hold objects on the wall (experimental feature ;-) inserting was done via negative modifier in the size of the magnet(s) plus 5% a colour change pause was inserted on layer 9…
- Pobrania
- 410
- Polubienia
- 307
- Ocena
- 0
P
PrintablesFizzy
FT EMS 350 (Electronics Management System)
NOTE Updated V2 of the frame for the Voron 2.4 has been released. Please use that as it has a number of improvements. https://www.printables.com/model/816080-ft-ems-v24-350-v2 The cable ducts that were designed for EMS 300 have now been…
- Pobrania
- 393
- Polubienia
- 101
- Ocena
- 5
P
PrintablesParksPrinter
Animatronic Eye Assembly
2 Eyeball Animatronic hobby assembly. Using micro servos and an Arduino joystick. Inspired by Will Cogley
- Pobrania
- 389
- Polubienia
- 66
- Ocena
- 0
P
PrintablesStefan
Airbus holder for Bose ProFlight 2 electronics module
This is a simple holder for the ProFlight 2 to fit over the headset clip in the Airbus A320 series. Print upright (with the cable cutout on the build plate) and supports on the build plate only. 15% infill works fine.
- Pobrania
- 384
- Polubienia
- 5
- Ocena
- 0
P
Printableszeroflow
Atorch DL24 Electronic Load case
Materials 4x M3x3 heat set inserts (short) 4x M3x10 socket head screws Print the LED light guide with transparent PETG. You can find a nice guide here: https://www.printables.com/model/15310-how-to-print-glass Preparation Put M3 heat set…
- Pobrania
- 380
- Polubienia
- 50
- Ocena
- 4,67
P
PrintablesFizzy
FT EMS SWC (Ender 3 V2/Pro Electronics Management System)
INTRODUCTION This frame was designed to help manage the electronic components required for a switchwire conversion (SKR Mini E3, Creality boardes, Raspberry Pi, U2C boards etc,..). Typical conversions have you squish all these components…
- Pobrania
- 379
- Polubienia
- 104
- Ocena
- 5
P
PrintablesJohny69
SEND iT electronic level mount for SPUHR
Two mounts for the MDT LRA SEND iT - MV3 level. both are vertical mounts for the SPUHR mono block scope rings. The 45 degree mount is to have the SEND iT on the RIGHT side of the gun. This is the best location for lefties and/or left eye…
- Pobrania
- 374
- Polubienia
- 17
- Ocena
- 0
P
PrintablesHendrikxWorkshop
Easy animatronic eye
Lets build this simple animatronic eye! List of material on the video description Help me keep creating projects and sharing the files for free, also, some Arduino codes, MP3 files and more are available on my Patreon:…
- Pobrania
- 370
- Polubienia
- 83
- Ocena
- 0
P
Printableskenobit
AAA 3x Battery case for electronics
I needed a box for a three AAA batteries for my electronics project. Couldn't find it so I made it myself. Enjoy.
- Pobrania
- 368
- Polubienia
- 62
- Ocena
- 5
P
PrintablesVadim
Electronic components box with drawers
This was the first project I created using OpenSCAD. The goal was to create a minimalistic design that would look good and be able to contain all my electronic components for hobby projects. Configuration : Printer: Ender 3 v3 SE 3…
- Pobrania
- 362
- Polubienia
- 36
- Ocena
- 4,67
P
PrintablesHyperPrints
Qidi Q1 Pro Electronics Divider
I've insulated my printer and found that the electronics area compromised the heated chamber. This divider will help to separate the electronics from the chamber air. Will not make it air-tight, but add a blockage to the convection path.
- Pobrania
- 361
- Polubienia
- 79
- Ocena
- 4,33