Liczymy pasujące modele…
11.03.2022 - Updated positions of bores for both endcaps/ turned powerswitch (V2) This brackets fits to Meanwell UHP-350-24V power supply in combination with Ratrig V-Minion 3D Printer.
These brackets can be used to hold two MeanWell UHP psus (usually one 24v and one 48v). Two versions are provided: one for UHP-200 models and one for UHP-350 models. I also included a modified version of the din rail mount which holds a…
This is a C-LIN SSR 40A480VAC Mount for my DIN Rail Bracket. You can find the bracket here ! For the Mount you need M3 screws and M3x4 or M3x6 Heat Inserts. For the DIN Rail Bracket Mount you need M3 countersunk screws. “Single” and…
I needed some extra power in my Voron V2.4, so I heavily modified the original from the great people at Voron Design and tested it. I'd send pictures but I really don't want to move my printer around and re-tune. ;-) Heatset insert…
DIN 3 Rail (35mm W) bracket for the Mean Well UHP-500 series power supply. Meant to be used on one rail only (lengthways). Bill of Material: 4x M3x6 BHCS 4x M3 Heat set inserts (M3x5x4) Print Settings: Minimum 40% infill + 4 Perimeters,…
This is a remix of the Mean Well UHP-350-24 power supply stand. I made some changes to the original project by increasing the thickness of some walls and lengthening the two closures, I also put the predisposition for the brass inserts to…
This is a 3D printed mount to allow a Meanwell UHP-200 power supply to be attached to a DIN rail. Requires 2x pcb_din_clip_v2 from the Voron Trident. BOM 2x pcb_din_clip_v2 (printed) 4x M3 Threaded Heat Set (M3x5x4) 4x M2 x 10…
This is a remix Meanwell UHP-350-24V power supply mount designed to attach to the Ratrig V-Minion 3D Printer from JP3d . These brackets fit the Meanwell UHP-350-24V power supply in combination with the XP Power FGSM inlet for Ratrig…
I liked the shape and size of JP3D's model, but the mounting holes were giving me some troubles. When I removed the screw for the AC end of the power supply(PS), an L-shaped clamp came loose inside the PS. So I decided to change the…
This Model is made to allow the mixed Mount of 1x UHP-350 and 1x UHP-200
Marked as remix because it was heavily inspired. Had to remake the model from scratch since design files weren't included but most dimensions were taken from the original design. Removed the slide-in mount for a DIN clip. Will fit he…
BOM: Amount Parts 12 M3x8 SHCS 8 M3 Heatset Insert 2 Din Rail Mounts (preffered Rama Heatset Mount) 2 Dual UHP Mounts I used it together with Ramas Din Mounts. https://github.com/Ramalama2/Voron-2-Mods/tree/main/DinClips If you use other…
need any 18mm screw x 3 i use socket head
So, you are looking into replacing the original PSU of your SV06 Plus? You might have come to the right place. Might. This is what I came up with for my personal build. Yours might be different; you have to decide (if the case is strong…
A DIN Rail Mount for a Mean Well UHP-350-XX Power Supply that attaches across two DIN Rails. Print Instructions: I've used the usual Voron 0.2mm Layer Height, 4x Perimeter, 5x Top / Bottom Layers, and 40% Infill Settings which should work…
uses: 4 x M3 OD5 L4 heat set inserts 4 x M3x12 SHCS 8 x M6x12 SHCS 8 x M6 T-nuts i used the holes that go through the the arms to route the 24V cables into the back of the printer, and to the mainboard. NOTE! current version does not…
This bracket mounts a Meanwell UHP-200 power supply to a DIN rail. Mounts using 2x pcb_din_clip from the Voron Trident. BOM 2x pcb_din_clip 4x M3 heat set inserts (M3x5x4) 4x M2x10 self-tapping screws for plastic 4x M3x8 socket head cap…
I needed to secure my UHP-200-24 PSU across/between my two DIN rails in a Voron 2.4 build. I didn't find a bracket that provides ability to adjust the spacing between the DIN clips so I made my own. No supports needed, use M3 heat inserts…
use this to design cool printers :-)
Low profile horizontal mounting solution for dual UHP-200 series power supplies on a DIN rail. Great solution for those running 48v on their printers, mounts a 24v and 48v UHP-200 series side by side and takes up the same footprint as the…
I simply combined both models to better suit my needs, hope you find it useful! I hope you like the models! If you want to support my work you can Buy me a Beer !
This remix is simply the original model's arms with negative volumes applied in the slicer to accommodate M6x12 screws rather than the countersunk screws used in the original.
RatRig V-Minion bottom case w/UHP 350-24 Mean Well and 120mm fan
I wanted to have a dedicated 5v supply and relay control of the 24v supply in my Voron 2.4. In order to make room, I switched to a UHP-200-24. This bracket mounts the PSU offset from the DIN centerline, making it possible to use other…
Based on the Original Model by JP3d Added space for an additional 5V (Meanwell RS-25-5) Power Supply on top of the Meanwell UHP-350-24 since I wanted a separate PSU for the finnicky Pi4. The Cap on the opposite end where the wires of the…
I designed this since I wanted to run some wires across the top of a UHP-200. Print notes Recommended material: ABS/ASA. Low creep material (not PLA/PETG/PA) is recommended to maintain clamping force. No shrinkage compensation needed for…
i was dissatisfied with the other mods due to a lack of sturdiness so i designed my own. uses some heat inserts and left over t-nuts from the kit that slide into the bottom of the 3060 profile, in conjunction with a press fit into the…
BoM: x4 M3 Heat Inserts Optional if you don't trust plastic threads: x4 M4 Heat Inserts
Simple hooks to hold the analytical column in place Back part fits a 2mm rod, twist to attach The hook fits a column up to 10mm in diameter Print in something temperature resistant, ASA was perfect in my case
Arm use M5 screw for Meanwell UHP-350-24 mount for Ratrig V-Minion 3D Printer
Use this model if you have a Mean Well UHP-350-24 psu and you're mounting it externally – e.g. with JP3d's mod . This is the stock back panel for the electronics case, but with cutouts for the Raspberry Pi 4b+ instead of the Pi 3a the…
The stock power supply in the Sovol Zero is only 150W, which doesn't really give any headroom for upgrades. This is a mount I quickly modeled up for attaching a Meanwell UHP-350 series power supply (or a compatible knockoff) at the front…
E3NG dual Meanwell UHP-200 powersupply mount for E3NG dinrail (usually one 24v and one 48v). Also a DXF file is included for the backplate without the original fan hole.
Remix of DoubleT's mount and modified to fit Fizzy's EMS. Low profile design to clear top acrylic plate. Easy access to mounting points to the FT EMS base plate. You will need to re-orient the model in your slicer to print (no supports…
Simple box for door access controller
I run a custom 220v bed heater which does not require powerful PSU, so I designed this minimalistic mount. Works well with LSP-160 and UHP-200. Keep in mind that mean well requires passive cooling of their products, at least add a…
Adapter to mount Mean Well UHP-500-24 power supply on the E3D Toolchanger Required Screws/Nuts: 4x M4 Nuts + M4x8 for Mounting Mean Well UHP-500-24 4x M4 Nuts + M4x12 + M4 Washers for Mounting Adapter to Toolchanger Total Size is about…
I redesigned the heat insert DC side Cover for the UHP-350-24 from edbdii If you upgrade to the UWP350 your Minion will be completely silent in standby - so I sometimes forgot to power it off. There is a little LED in the UWP but I wanted…
I thought the following design was decent because you can use bolts to attach the cover(s) - I am only using the front cover but you can mirror this model to use front and rear.…
I wanted to organise the wiring into my dual UHPs and Omron SSR. I wanted to use wagos and I also wanted a protective cover once it was wired in to keep it extra safe BOM: 2 x Voron spec heat inserts (M3x5wx4L) 2 x M3 screws (sorry will…
I wanted to mount 2 UHP Power supplies and I didn't have tools to tap new holes in my Bakelite electronics bay base I used these as both a drill template and a mount. Drill 4 holes for one end (2 per power supply) and use the power…
I wanted to mount 2 UHP Power supplies and I didn't have tools to tap new holes in my Bakelite electronics bay base I used these as both a drill template and a mount. Drill 4 holes for one end (2 per power supply) and use the power…
I wanted to organise the wiring into my dual UHPs and Omron SSR. I wanted to use wagos and I also wanted a protective cover once it was wired in to keep it extra safe BOM: 2 x Voron spec heat inserts (M3x5wx4L) 2 x M3 screws (sorry will…
Horizontal adapter for Meanwell UHP-500-24 mounted on Meanwell DRP-03 adapter on din rail. Used on Voron 2.4
I wanted to have a dedicated 5v supply and relay control of the 24v supply in my Voron 2.4. In order to make room, I switched to a UHP-200-24. This bracket mounts the PSU offset from the DIN centerline, making it possible to use other…
Mount a MEAN WELL UHP-350-24 perpendicular on a voron's din rails.
An external mounting option was required for the Meanwell UHP-350-24V power supply. The original model was adapted and significantly modified for this purpose. Important information: - model can be printed in PLA or PETG - screws and nuts…
I'll be running a Mean Well UHP-500-48 power supply in my printer, and since there wasn't an existing FT EMS mount for it, I made a quick model for it. I tried to retain the house style, so it shouldn't look out of place next to other…
Since these models could be used with electrical components, if you use these models, it is at your own risk. Using a fire resistant filament is probably a good idea too. This is a remix with a clip design that originated from Ramalama2…
Upgrading my Voron 2.4 350 to 48v, and needed a way to mount an additional 48v power supply. This bracket allows mounting of a UHP-200 in the empty space to the side of the existing 24v power supply. While you can get a mount to run two…
to Mount 2 Meanwell UHP instead of the K1 PSU New version moved 5mm to the side frame
You should be prepared to drill and tap an M3 thread into a 6mm thick steel plate. Use a 2.8mm drill bit.
Had issues routing cables in the opening on the original model. I extended the end cap by 10mm and enlarged the opening.
Use with this DIN Mount BOM: 4 M3x8 or M3x10 4 M3x12 BHCS 4 M3 Washer
Remixed for dual UHP-350 power supplies, which are both wider and longer than the UHP-200 models. Takes up roughly the same amount of space as a single LRS-200/350 power supply.
Requires: 4x This Adapter - Meanwell_UHP750_VoronV2.4_DIN_Rail_Adapter 4x Meanwell LRS-200-24 mounts 12x M4 Nuts 12x M4 ~10mm Bolt There should be sufficient play in the hole position to fit most setups, you may need to bring the din…
UHP 350 Mount for the Creality K1 printer. You need 8xM3 heat inserts and 4xM3 countersunk screws
Mount for 2x Mean Well UHP-200 series power supply, including space for 40mm fans (4010, 4015, 4020). Required hardware: - 24x M3x4x5 heat insert - 12x M3x8mm SHCS for mounting the power supply and mounting the DIN rail adapter - 8x…
Had a lot of trouble adding the endcap screw, so I remixed the part to facilitate this task. I used a M3 12
Wanted to have a shelly hidden inside the PSU cover so I can control the printer and the power consumption of it.
Needed a mount to put a LRS-200-24 and UHP-200-48 side by side without taking up alot of room in my voron trident, so this is what i came up with @OtherBarry created a similar mount for dual UHP-200 PSU's in the Voron discord, and i…
Note: I found this while building a Microcenter Voron 2.4r2 kit. None of the current STL's seem to work for the UHP200 PSU that came with it. I am re-uploading here in the hopes that it will stay alive here on printables as the Github…
DIN 3 Rail (35mm W) bracket for the Mean Well UHP-350 series power supply. Meant to be used on one rail only (lengthways). Bill of Material: 4x M3x6 BHCS 4x M3 Heat set inserts (M3x5x4) Print Settings: Minimum 40% infill + 4 Perimeters,…
flat UHP-200 side bracket 2020 t-slot extrusion mount, for mounting meanwell UHP-200 PSU sideways against the extrusions inside the electronics bay in a voron 2.4. Print it with the flat side down, without supports. Filament type: ABS /…
Horizontal adapter for Meanwell UHP-500-24 mounted on Meanwell DRP-03 adapter on din rail. Used on Voron 2.4
This terminal cover just pushes on over the end of the unit & the ribs grip onto the ribs on the Meanwell UHP-500 series. It is the unit on the left in the photo. I always print any electrical covers in ABS or a higher temp filament. May…
Mount 2 UHP-500 PSUs within the same width of an LRS-200. Required BOM: 2 M3x16 cap head screws 4 M3x25 cap head screws 2 M3 5x4mm heatset inserts (Voron spec) 4 M3 square nuts Instructions: Install heatset insert into part A Install 2x…
Basic power supply cover for the MeanWell UHP-200, with XT60 output ports & Fused AC Snug friction fit. With super glue for the XT60 connectors. Parts Used: Fused Rocker Switch Power Socket https://shorturl.at/Hc9cB Female XT60 Connectors…
A DIN Rail Mount for a Mean Well UHP-500-XX Power Supply that attaches across two DIN Rails. Print Instructions: I've used the usual Voron 0.2mm Layer Height, 4x Perimeter, 5x Top / Bottom Layers, and 40% Infill Settings which should work…
