Liczymy pasujące modele…
Custom flash diffuser for pop-up flash of Nikon D7200. Since version 2.2 it will fit other cameras as well due to the sliding slot: you only need one M3 nut and one M3x8mm screw. I used this fantastic design for the flash mount, many…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed at 0.2mm. The bottom when printed, which becomes the top, is done with two layers at 45 degrees. I used generic white PLA, but anything that is slightly transparent should do. More of my builds at makies.au
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
This is a diffuser that can be used to evenly distribute the light from Philips Hue E27 LED bulbs. Other light sources may also fit inside. I originally made the diffuser for a triangular lampshade , but it also works as a stand-alone…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Don't find what I was looking for to put in my Lack Table Enclosure, so I created this one. I try a few good design I found around but none was really what I was looking for… I don't want to see any screw, I also want a track to put my…
Wydruk około 1,26 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Imitation of 7.92 x 57 Mauser cartridges. It prints really well. It is necessary to use supports! If you are interested in my work, the links are here:…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Printed in transparent polymaker PETG, max 15mm/second print speed makes the diffuser clear but transparent enough. Prints without supports. I used a archimedean curve on the external face which looks pretty cool.
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
I used spiral tube that has 60cms of diameter. The two models are for different gutter dimentions, 100cms diameter and 80cms. Works nicely ;)
Wydruk około 12,92 €–15,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tricky to print due need of some support. I was able to print with only a medium support in the middle
Wydruk około 6,94 €–8,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Diffuser fitting a Ford Focus MK4 to install Aliexpress ambient lights.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
This diffuser is upgrade for ‘Sapphire Pro - LED Strip Holder for WS2812b’ This upgrade is easy to print, I used Devil Design transparent PET-G filament, maybe it work great with white filament YOU SHOULD TRY!
Wydruk około 3,39 €–4,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 0.8 MOD gear 60T for the 2" Feather-Touch focuser of Starlight Instrument, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing control, or…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tone down your super bright Magnate Solitaire for when you need it to write in the car. Now you won't be blinded when illuminated your writing surface. Save your retinas.
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
0.8 MOD gear 60T (for the original focuser wheel of Takahashi FSQ106N telescopes) , which can be applied for focus automation.
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are diffusers that fit the fully printed flashlight . Replace the original bulb conductor with this threaded one, then pick your diffuser and screw it on. I have found it most usable to actually glue the diffuser to the bulb…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
I made this to diffuse the light from my flip5. Its great as a very soft night light. Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 3 Infill…
Wydruk około 3,45 €–4,22 € nettoWstępna wycena jednego wariantu
Spare part for a trumpet-shaped ornamental fountain diffuser. Includes a threaded element as the fixing accessory. I needed it, so I redesigned it with some improvements. I love solving problems with 3D printing.
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
I don't like how this turned out. I was going for 30° of deflection, but 15° was all I got. So go instead with my 80- or 90-degree deflectors, which work beautifully. Instructions Print without infill, without solid top layers, and…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
A not-quite-right-angle elbow to deflect the stream of sweet-smelling vapor coming out of my diffuser.
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
0.8 MOD gear 60T (for the original focuser wheel of the Takahashi FSQ85EDP telescope) , which can be applied for focus automation.
Wydruk około 0,88 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
0.8 MOD gear 60T (for the original focuser wheel of the WO Z61-III telescope), which can be applied for focus automation.
Wydruk około 1,05 €–1,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This miniature jet engine easily attaches to your car's AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container. Update 11-May-24: Version V2 Added Important: Using a heat-resistant material is…
This is a redesigned version of my previous water diffuser. It's intended to prevent holes forming in the ground while watering, and it allows for higher water flow rates. The diffuser is designed to connect directly to a standard…
diffuse you LEDs! Be sure to read the manual to see how. STLs for reference only. Use openSCAD to customize to your setup. need a box? Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Certain parts Resolution:…
My Website This is my custom-designed Dart camera setup with an integrated light ring. I printed the whole setup on a Bambu Lab A1. The problem with other setups is that I hit the camera on top when trying to throw a double 20. User…
Seatbelt Insert for your cars seat belt buckle to prevent the alarm from going off. Often while using the vehicle in the yard or off-road at slow speeds, one needs to be able to move around freely in the driver seat to see around the…
This is a small and simple device that can be used to fuse filament together. You can finally take all those end of the spool pieces and samples of filament and combine them into enough of a roll to print something. There are two parts, a…
The announcement of the Resident Evil 4 remake by Capcom made me want to model Krauser's famous knife. I was inspired by several illustrations and shots of the knife during the knife duel sequence between Krauser and Leon. The blade is…
– Edit 01/08/2024: Added 10 PrusaXL versions (300mm x 300mm, 11.8 inches) of the panels, they can be found over on their own model page here. Based on the panels featured in this Youtube Video by 3D Printer Academy and not being able to…
This diffuser prints upside-down and does not require supports due to the 45 degree slope and angled diffusion holes. Plenty of perforations on all sides to let the water out quickly while not disturbing the bottom of the aquarium. Feet…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Matchstick Diffuser A diffuser for the Daylight/Rainbow on a Matchstick LEDs BOM Item Qty. M3 Heatset Insert 4 M3x6 BHCS 4 Printing Print one of each main_body_daylight_A.stl and main_body_daylight_B.stl if you have Daylight on a…
8x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version * I…
The Hadley telescope by Maff is a great design that allows makers for an easy and cheap introduction to astronomy. There are lots of difficulties when using a telescope for the first time, for me one of them was trying to take a picture…
Introduction A selection of remixed focuser options for Hadley , all designed from scratch with 45deg threads and 3mm pitch for vastly improved printability and operation. Mostly remixes of Hadley focusers that are out there in the wild,…
I designed this water diffuser to avoid the holes created in the ground when watering, it allows to use higher flows. Its designed to be connected to a water quick connect. I printed it standing up with quick release connector facing…
4010 Mount for Ender 3 v3 se
The mousers are one of my favorite robots from my childhood, these little robotic chompers have been on my list to model for a while, I hope you enjoy them as much as I do. Designed in 1/6th scale, The Mousers (M.obile O.ffensive…
I couldn't find a model that would let me mount and hide my Disco-on-a-stick and Daylight-on-a-stick LED strips and hide the lights behind a tidy diffuser, so here it is. The provided Step files are designed for a Voron 2.4 350, but I've…
(From time to time I am asked "Will it work/Could it mount on my X telescope?" for various values of X. Well if I had an X, I would make it work. You could send me an X! But it's cheaper if you make a simple adapter plate - If you don't…
➡️ An add-on diffuser for the popular LED Strip Holder for Voron 2.4 here on Printables Sizes Only available for 300mm Voron v2.4 for now, since it's the only one I have to test fit. Please feel free to Remix it to fit more sizes. I'm…
Easy to print. Just turn on organic supports and it should be dandy. Diffuses the water being poured into the tank when topping it up. Hope you like it!
Just a simple print that allows you to pour water into your tanks without disturbing the aquascape. Added a larger version for bigger tanks. Fits over a tank rim up to 28mm wide.
Ore block - 100% infill; tree supports; grey PLA Diffuser - 100% infill; white PLA Light Holder - 60% infill; any color PLA; fuzzy setting to help adhere light strip to surface Base - 40% infill; tree supports; black PLA Once all of the…
Modulair Diffusion panels with LED lighting! disclaimer: Still in the process of figuring out product design, testing and documenting everything this will be a very early concept. currently I'm in version 8 or 9 (can't even remeber/ keep…
16x16 LED Matrix Frame No glue, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version…
This is a 3D model of a diffuser attachment designed for the Dyson Airwrap. Ideal for those looking to experiment with new accessories for their Airwrap, this model helps distribute air more evenly to enhance curling and drying…
A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…
My wife asked to design and print this thing for her, so I did. Printed with ABS to be heat resistant. Layer height - 0.2, infill - 5%, 2 walls. Add massive inside and outside brim. No supports needed. Print test ring first to test if it…
I came across a model designed by Mark Rhodes and initially thought I could easily replicate it myself. However, I soon discovered that creating effective acoustic diffusion involves more than randomly generating cubes and placing them on…
Sharing my custom 3D enclosure design for the Lenovo M90q Gen 1, featuring the MSI RTX 3050 LP, a 3.5-inch LCD screen, and an RGB fan. This project involved designing the 3D case model using SketchUp and printing it with PETG filament on…
Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds BMAcoffee: https://buymeacoff.ee/dm4ds Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u Etherium:…
After upgrading my Layer Fans to 5015's, the stock 2010 Diffuser Fan looked comically tiny. This mount directs the airflow of a 4020 Fan to the Diffuser. Note: The Fan just slips-in… No screws. If tolerances make for a loose fit, a dab of…
I only have two stamped sheet metal stripper clips for my 98k and I wanted a few more (without breaking the bank), so I did some tests… this is the 8th iteration so far and it works reasonably well. I closed off one end to stop the rounds…
Updates! Reorganized parts listing for clarity About After spending some time trying to use a telescope camera with the wonderful Hadley telescope by Maff , I decided I needed a focuser that didn't rotate. Rather than wait, I decided I'd…
Meet Scyphozoa belonging to the kingdom Animalia and phylum Cnidaria and give him a warm welcome in your Christmas decorations. A completely different Christmas decoration this year! Simply slide it over an existing LED of the Christmas…
This is a quick remix of Bambu Lab's Lithophane frame. The only changes made were: Remove the ‘Bambu Lab’ logo from the top of the frame Added locks for the diffuser plate so it doesn't slip out I've included a 3mf file. Supports are…
Fan shroud diffuser with better airflow, and compatible with Sand's Lightweight Fan Shroud. Like many of you, I experienced the shrieking death of the stock 2510 cooling fan on my Ender 3 V3 SE. I liked TheDude's fan shroud, but found it…
Features It opens It has a timer It is screen accurate (does not explode) Other Parts Egg timer Hinge Magnets (3/16" diameter, 1/8" thick) Instruction Print one of everything Take apart the egg timer. Screw the Timer Connector onto the…
Is your 2150 fan dying and needs replaced? Is the cooling system for the hot end “inadequate” for you? Well, here's you're solution. It's designed around my other fan shroud , but made for this use case. I went through one prototype that…
I got a request for a ammo box for Swedish Mauser. The spacing is 50pcs/82x12,60mm. The ammo looks very pointy from unlike the sketch, but I have followed the measurements that were given. Haven't printed it but i have moved the lid in…
I took the Voron enclosure part and made it longer so I could use it on other projects.
Remix of an awesome idea from Subtle3D. I've taken the same model and designed end caps, a right angle, as well as a few different lengths to fit in different configurations. STEP and Fusion files available for easy customizations. The…
Simply clip them on the effector, it will withstand accelerations without any glue or screws or wathever. I used gyroïd infill @10% without testing any other pattern or density. Filament is PLA White Matte from Grossiste3D, it gives a…
Customizable Dummy Battery (AAA, AA, C, D, user defined)(Remixed) Original author by Eansdar https://www.thingiverse.com/thing:2650806/ Remixed by mofosyne to print as one piece avoiding overhangs, as well as improving tolerances and…
16x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector Optional socket-less version * I suggest gluing the…
Simple yet very effective diffuser system for LED strip lights. Base can be nailed or double sided taped, diffuser covers snap into place. All parts can be cut to proper length in your slicer for a perfectly custom fit every time. I…
This is a twisted air diffuser for a 120mm PC case fan. The air vent exits at a 45 degree angle. No support needed. Support If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link:…
Aquarium water change diffuser, Simple to use just put it on the side of your Aquarium and enjoy clear water!
In den 90ern waren sie topmodern und von Architekt Luigi Blau entworfen. Blau wurde 1945 in Mistelbach geboren. Nach seinen Plänen wurden unter anderem das Burgtheater umgebaut und das Theater Ronacher in Wien renoviert. Er gilt als einer…
32x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version *…
The 7.92×57mm Mauser is a rimless bottlenecked rifle cartridge that was used as the German service cartridge in both World Wars. Category: Sport & Outdoors
Clock diffusor for led Rings
You can buy these from me here! Consider donating to us if you like this model! This diffuser lamp shade allows you to easily use your flashlight to brighten up your office or bedroom. Currently available for the Emisar D4V2, D4K, D18,…
This is a modified mounting plate of 1.25" Crayford Focuser for telescopes by aeberbach for use with Hadley telescope. This focuser is a massive upgrade in functionality compared to any printed helical focuser. Attaches to the Hadley UTA…
LED lights built in to the Ender 3 S1 Pro (and add-on for the regular S1) were making hot spots on the bed when shooting time-laspe and so need a bigger diffuser to soften the light. Print Settings Printer Brand: Creality Printer: Ender 3…
2024-06-01 : updated version with higher brim! !!! SCALING FOR HOSE DIAMETERS OTHER THAN 15mm NEEDED !!! use this formula: 100% scaling divided by 15mm. multiplicate the result by the outer diameter of your hose in milimeters. example:…
Garden Tap Adapter: 3/4 Inch to M24 for Water Diffusers and Filters Product Description: Introducing the Garden Tap Adapter, designed to convert your 3/4 inch garden tap into a compatible connection for M24 water diffusers and filters.…
A light diffuser/holder for string or strip LEDs in the Lack Enclosure Print instructions Printing 2 per side will fit in between the enclosure legs. Model is pre-positioned. You will need 2 small wood screws per diffuser. Use 3…
I am proud to present to you “ Hypatia ”, my take on a focuser for the Hadley Telescope ecosystem. It combines what I consider to be the best features in other designs, and some ideas of my own: the Crayford style of focuser - which uses…
Jealous of the diffused-looking light from the new Apex Neptune Sky? I am. Want to get that T5/halide look from your AI Prime? I do. I made this light hood for AI Prime HD to get rid of most of the “disco ball” effect that is common in…
Update: Adding a NEW V3 VERSION with a full length that runs along the entire bottom edge of the xLCD cover and guides the light perfectly along its entire length. Adding a NEW V2 VERSION that is shape improved and the diffusion part is…
Updates 14. April 2025: added the Information that it also fits on the Prusa XL xLCD. 18. November 2024 : removed the minimally longer diffusor file because the updatet fits well for PLA and PETG. Added the .stl files for the diffuser as…
I was tired of seeing the TradRack Binky mod without a STEP file to adjust when needed, so I mocked up my own with some user mods I also use. I created the binky-Tradrack integration from scratch, but the rest was just arranging,…
This is ventilation air-intake adjustable grill, with uniform air difuser at ceiling level. It is built for pipes with exterior dimension of (usually) 125mm and interior of 117mm. Screw is 5cm height. Part 2 needs to be 3D-printed with…
You can buy these diffusers from me here! If you like our models, consider giving us a 1 time donation! Please see the assembly instructions photo! This is a flashlight diffuser that distributes the light radially and downward to maximize…
Users of the kinda cheap-ish Eastwood powder coating system know about the problem around uneven air distribution in the powder container. You often get clumps of powder out of the nozzle or no powder at all until you shake the bottle…
The original file isn't in the list provided so I decided to remix it to make it
Non rotating helical focuser for a precise focus which can easily be attached to your telescope, or a precise variable extension for photography and visual observing. The orientation of the camera is maintened during the focusing…
I was looking for a good solution to make the focuser motor work with my Samyang 135mm lens on the OAT. I decided to just design my own. I think this ended up working well. There are two sets of rings, small and large. The small rings…
Water diffuser against water swirling when filling the aquarium To prevent the sand from swirling I used the sealing rubber from the original coupling for the garden hose, you can buy it cheaply in the garden store. I created this model…
Wasn't particularly thrilled with most of the LED diffuser channel corners out there, so decided to create my own. These were designed to be as close to an exact fit as the end-caps that come with the channel, and as minimalistic as…
This model will print without supports, it works well on my Python hose
Hose connector end with water diffuser, 3D printed in one piece from PETG filament. Second part is rubber ring seal remove from the original hose coupling or printed from flex filament Parametrically adjustable: number of intermediate…
Remixed from mapleleafmakers for the standard disco on a stick used in 250 and 300mm V2 and VT
Also, I later changed paper diffuser sheet to some layers from laptop screen diffusion, it seems to work a bit better.
This was based on the diffuser at https://www.thingiverse.com/thing:1903744. It has the same internal dimensions (10mm square grid, 9.2mm internal with 0.8mm walls between). I added added a 0.4mm layer to the top, a 0.4mm recess for the…
Recommend printing PETG with Top surface Hilbert, Bottom Monotonic and Sparse infill Lightning with density 98 for nice look. Needs supports.
LED diffuser grid for ws2812b strips (60 leds/meter) display. I would recommend to print it 0.2 layer height, print the 3 first layers with white PLA then change filament to black. Pictures are from 4 8x8 grid glued together for a 256…
