440 modeli
PrusaSlicer filament profiles* for the various lines of filament produced by Polymaker. Because well-tuned material-specific settings outperform generic default settings. * Or ‘presets’ as the kids are now calling them. Observations…
Phone stand designed for Iphone 11 and Ikea LIVBOJ wireless charger. Print instructions Phone stand designed for Iphone 11 and Ikea LIVBOJ wireless charger. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
This a remix and modification of Ric Tru's Remix of yanev's design https://www.printables.com/prints/39729-tool-box-parametric I have reinforced the stubs and expanded the box to fit both flipper, WiFi dev board and some extra room for…
Twisted Vase is designed for 3D printing from Prusament PVB material. A special easy printing with good transparency. The printed PVB model can be easily smoothed using post-processing with isopropyl alcohol (IPA) to give the model a…
This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220 This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.…
Edit 29.09.2022: I added an improved top cover with integrated buttons (no longer losing those tiny parts!), similar to the Prusa mk3s reset button. Also added holes for LED where the LEDs actually are - the old one had a hole for viewing…
This is a remodeled game rip of the Fallout 4 Vertibird VB-01. It is fully printable. The motors and propellers turn. I will upload a version without the windshield so you can print in clear and put them in. Notes: Chopping air frame…
This remix of beebo's designs fits well into Kermit's top half flipper case. It holds the wifi board snugly and has space for the pins so they aren't rubbing up against anything. This cutout was designed for fivesixzero's protective case.…
tow behind tractor with forage superstructure created according to the original behind tractors created by @MrHanjak, the corresponding scale of the model is 350%
This is a remodeled game rip of the Fallout 4 Vertibird VB-01. It is fully printable. The motors and propellers turn. I will upload a version without the windshield so you can print in clear and put them in. Notes: Chopping air frame…
BvB Einkaufschip in der Größe einer 1€ Münze.
This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…
Our Ikea Livboj chargers are scattered all over the house, and they take up a lot of desk real estate while rending the phone unreadable in it's horizontal position. This is a simple print, needs no support, and the power cable to the…
vlek 9t s nástavbou na klády - For size to models of MrHanjak tractors use 350%
Print Settings Printer: Bambulab X1 Carbon Print profile: 0.20mm Standard @BBL X1C Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: ESUN eTwinkling black Notes: I used ESUN PLA with 0.2 standard settings. No support needed for…
A modular charging smartphone stand for the IKEA LIVBOJ wireless charger pad. The phone can be held in both portrait and landscape orientation with the charging pad still placed in the middle of the phone. The cable runs in a slit in the…
A remix of the drip tray for Tormek T8, but customized for using with the FVB attached. Made 2 versions of it, one that is optimized for PETG and one for PLA - difference being the diameter of the holes that clamps ontop of the rods from…
After a having a problem with my guiding due to dew, I decided I need a solution fast. I could save the night with an empty toilet paper roll 😅, but a more permanent solution was needed. This is a custom dew shield for the SV165 Mini…
BVB Smartphone Ständer v3 ist das Logo Mittig zentriert
Nástavba, Hardtop na vůz Bruder RAM 2500 Nástavba je sundavatelná, nebo přilepit
Hallo und Heja BVB, was soll ich sagen, es ist eine kleine Lightbox mit BVB Logo und als Basis der Signal Iduna Park! Viel Spaß beim Drucken. Schaut gerne mal bei mir auf YouTube oder Instagram vorbei, da habe ich das ein oder andere mehr…
I created some nice drink coasters for all BVB fans in the world. Just print them and put your beer on it while watching the game. 2-color-print has been done with the ColorChange-tool from Prusa. (…
BVB Spardose auf jeder Seite mit Logo und Klickdeckel
The model offers an ideal solution for anyone who owns the IKEA Livboj QI charging station and wants to charge their iPhone in standby mode. Just print in PLA and put your Livboj charging station on this stand.
vlek 9t s nástavbou na kulaté balíky s balíky. For size to models of MrHanjak tractors use 350%
The Flipper Zero WiFi Devboard Case Bumper has been specifically designed to fit on the top of the case design by King and provide added support to keep the two parts securely together.
Airpods Pro now supported as well. !!!! Note that the AirPods Pro is untested as i do not own them !!!! Normal AirPods: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi.stl AirPods Pro: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi_Pro.stl This is…
A shopping card token in the size of a 1-Euro-coin with the BVB symbol on one or both sides. Print with pause and switch fillament. Or paint manually. Ein Einkaufswagen chip in der Größe einer 1 Euro Münze mit dem Symbol vom BVB 09. Beim…
This is very nice model of BVB keychain. / Toto je velice dobrý model BVB klíčenky.
Wireless Charger: Ikea LIVBOJ Test phones: Google Pixel 7a Samsung S10e Samsung S22
I designed the Ikea Livboj QI charger in precise measurements. I have added the Ikea USB C sold separately from the Livboj QI charger, It can be used to ensure there is space for the USB C cable in the model you are designing. The reason…
Use an IKEA LIVBOJ to create a Qi-certified/compatible wireless phone charging stand that supports both portrait and landscape orientations! No supports are required. If the dimensions don't work with your phone, you can use the .f3d…
BVB Bierdeckel mit einem Durchmesser von 10cm und einer Stärke von 4mm
Cult silhouette of BVB logo implemented into a 80mm coaster. An extraordinary extra for every kitchen and party arrangement. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15%
Created out of the*.svg wich is puplished at Wikipedia with openSCAD Category: 3D Printing
Print settings: Material: PETG, ABS, or ASA Layer height: 0.25mm Wall loops: 3 If you want to have the honeycomb holes for ventilation, like how I have in the photos, add a modifier to the first 2.5mm with the following settings: Infill:…
Snug fit printed flat on a Prusa Mini on 0.2mm speed profile PETG - 100% infill about 30-35min print time. EDIT: I have added a tall version of the Cable Management. I have not tested it, print at own risk.
Kleiner Kühlschrankmagnet mit innenliegenden Magneten (10mmx3mm). Einfach im Prusaclicer eine Pause einfügen und die Magnete einsetzen.
Status: V1 does not work very well, V2 works better but is a flange type. The lines are quite small, printer precision will be beneficial and a nozzle smaller than 0.4mm would likely help, untested. V1 ID: 48.5mm Print flat side down, any…
A finder foot for the Svbony SV241 Powerbox, allowing you to attached to a finder shoe on your telescope. I used two M4 10mm button head screws to attach to the Powerbox.
Do you still have an overview of all your filaments? Let me help! Here is yet another Filament sample, however without a lot of fuss. Easily printable with every setting you wish. The end has three different thicknesses to determine the…
I printed this part on the Bambulabs P1S using 100% infill, supports and in PETG.
Upgrade your cycling safety with the Velobuild VB 167 Seatpost Radar Mount designed for Garmin Varia or similar radar devices. Crafted for easy installation, it requires an two M2 heat set inserts and a M4 heat set insert and screws.…
El portafiltros SVbony SV226 viene con dos portafiltros y necesitaba guardarlos de la manera más eficiente en mi caja para un uso lo más comodo y rápido posible. Tambien he preparado dos versiones de tapas para cuando no quiero usar…
Remix of the Tormek Drip Tray for FVB from @Leapstep_261016, this remix has space for the big round nuts used to level the attachments. The design is based on Drip Tray For T7 / T8 In Connection With Vertical Front Base » Schleifjunkies…
Printed in PLA on Ender3V2. Tried to print with PETG, but the digits did not stick reliably on the print bed. For the lid, select NO to fix wrong scale and YES to load in group.
Ein BVB Stern zum aufhängen z.B. am Christbaum. Mit dem richtigen Filament noch schöner schwarze Schrift auf gelben Stern
Bahtinov mask for the Svbony 60/240mm guide scope. Splitable Bahtinov Mask Generator by Ryoko .scad file customzied in SCAD. Wall thickness is 3mm. Not a snug fit to avoid problems with shrinking on cold nights. Print Settings Printer…
Add wireless charging and some class to your Scala with this simple adapter!
Wallmount for vaccum cleaner Vorwerk Kobold VB 100 I used an TPU filament for the black rubber insert. Just superclued it inside the groove. I will also relase a model without groove in case you do not have any TPU, but to be honbest the…
This is a dew shield for the SvBony SV165 30mm mini guide scope. There is also a cap included to print due to the size of the shield being bigger than the orginal one.
Airpods Pro now supported as well. Normal AirPods: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi.stl AirPods Pro: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi_Pro.stl This is designed to charge 3 devices at once. Charging cradle for Apple…
140x140x25 mm spikes made for a vapor smoothing PvB prints in a round jar Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .02 Infill: 10 Filament: Prusament PLA Gravity Gray Category: 3D Printer…
May work for similar fixtures that are 25mm wide and 42mm tall where it attaches. You should probably print it in a material with decent temperature resistance. I used ABS. PETG is probably fine. Zip tie slots are 6x2mm.
Model is designed for printing without any supports or even infill (test print on photos was with 1 perimeter, 0% infill, 0.5 nozzle) (recommended at least 3 perimeters when no-infill-option); Two versions: standard or with flat top;…
Introduction Many designs like RC cars and trucks, lanterns, model houses, etc. would benefit if 3D printing could be used to create truly transparent window panes. But as you might know, FDM printing transparent filament per se does not…
Wall-mounting bracket for the FreeBox POP and TVbox.
An adapter for the IKEA Livboj wireless charger, https://www.ikea.com/us/en/p/livboj-wireless-charger-black-90447058/ Phone will charge in both standing and lying position. It's a very tight fit so some force must be used to push the…
No Supports Needed. Charging location for the Apple Watch (uses a magnetic charger). Stand for the iPhone XR (and other models alike) (uses Ikea Livboj QI charger). Remix of: https://www.thingiverse.com/thing:4516696 Print instructions…
Wall mounted IKEA LIVBOJ basic 5W wireless charger dock (made for pixel 7 with a dbrand grip case), but should fit most phones, maybe sometimes with a little too much space to spare, since the grip is a big case. There is a solidworks…
I created here an opened box version for the BVB Drink Coaster. In the box fit 10 coaster.
Standard Vixen-stlye dovetail, with holes for Svbony / Orion Guide Scope rings, and Svbony dovetail clamp. Versions: The 90mm version is the same length as the original finder-dovetail. The 120mm adds a bit extra length for balancing.…
A case for the GPIO hardware that is required to use Seader with Flipper Zero. This case is redesigned to fit the original Flipper Zero dev board with the additional hardware. Center the text and the lid in your slicer so they align…
I wanted a basic cover to put over my batteries when not in use as I do not like to store them in the tool. Made in openscad. Tried to over engineer it and ended up going back to some basics. This should fit the battery snugly, but not be…
This is a simple 2x2 Gridfinity holder/stand for the EEVblog Brymen BM235 multimeter. It allows you to store the device vertically at a slight angle so you can easily view the display when using it. I might end up tweaking the model a bit…
This is a stand for IKEA LIVBOJ wireless charger that keeps your phone in vertical position. Comes in two sizes, the smaller one needs supports, the bigger one doesn't. Designed from scratch, but basically a variant of…
Charging Station for Ikea Livboj and Apple Watch , compact and clean design to easily charge all your portable devices! You can also adapt a normal charging cable for your phone, just press it in the right canal and place your phone on…
mini-VB Description Updates can be found below Warning : This design is made for aesthetics, and thus is not a very easy print to do. You'll have to likely experiment a bit with support and orientation, depending on your own printer.…
printed on a BambuLabs P1S 0.16mm layer height with a 0.2 nozzle 15% gyroid infill no support required PLA+ from SUNLU
Its a model wiznet W5500-EVB-Pico
🛻 Dodge Pickup → Hauler – přestavbový kit Tento model představuje kompletní přestavbový kit , díky kterému lze klasický Dodge pickup přeměnit na stylový hauler v duchu custom trucků a závodních doprovodných vozů. Na fotografiích je vidět…
DVBT / DVBT2 Antenne. Nur für Private Anwendungen ! Erstellt nach Recherchen im Netz: MOXON UHF / 690 Mhz / Kanal 48 kann bis zu 5dB bringen. Angaben ohne Gewähr. Ich habe Kupfer-Lack-Draht (1,5mm Durchmesser) entsprechend vor gebogen und…
Doplňky pro dílenskou nástavbu V3s 1:43 Od @KRtekTM_46390 Skříň na Praga V3S (Degostini, 1:43)
The Tri-Bahtinov mask was designed using this excellent tool: https://skeye.rocks/tools/mask/ The mask and dew shield are designed to be a snug pressure fit onto the lens cap flange by adding a couple strips of adhesive velvet as sold for…
A problem with the vbar control evo… most USB-C cables don’t fit in the hole to charge the radio. Also, you can’t charge easily while driving, as the radio has to be upright. So, I made a thing to turn 90 degrees. It simply snaps in…
Das originale IKEA-Ladegerät ist nicht optimal für neuere Smartphones geeignet. Das Kamera-Design moderner Geräte verhindert ein planes Aufliegen und erschwert das exakte Platzieren, was bei induktiven Ladegeräten problematisch ist. Das…
About: The model offers an ideal Smartphone stand for everyone looking for an minimalist, simple design for not only holding his phone, but also charging it. Assembly: Just print and put your IKEA Livboj Charging-pad in the slot. If the…
Required equipment: IKEA Livboj charger USB-C charghing cable Samsung Galaxy Watch 5 wireless charger Superglue The base station and the watch charging arm can be glued together. The base station does need support, while the arm can be…
Update History: 11th April 2021: Added links to my other related designs at the end of the description 24th March 2021: Added a photo of IPA smoothing using a brush 23rd March 2021: Provided the 3MF files for download. Now can directly…
Original model didn't fit on 2022+ WRX models even though the latch mechanism is very similar, I had to resize the “legs” of the handle to fit into the narrower hole on the 2022+ WRX. Non-printed parts necessary: 2 - M6-1.0 x 20mm screws…
The svbony SV226 filter drawer comes with two holders, but you may need to use more, so I designed this magnetic modular box. Print as many modules as you need. You need one “spacer” and two “plates” parts per module. I choose a 2…
Request by an amatorial astronomic photographer “Andrea Anghileri” This is a dew shield for a guide telescope by Svbony model SV165 3omm f4 The project is composed by 4 pieces: dew shield with rapid joint lens cover with rapid joint part…
Stable holder with 70° inclination for standard baby displays / monitors or alternatively smartphones. I have attached the display to the frame with two small strips of Velcro tape so that it does not slip. Compared to the factory…
Internal cable routing (nice) and room for 4 bumpers on the bottom. Specifically made to fit McMaster Carr part #95495K673 Adhesive-Back Bumpers Polyurethane, 7/16" OD, 13/64" High, Durometer 50A, Clear Category: Electronics
Ain't got no time for quartz clocks. Get that WWVB goodness. Boblobs 's Modular Clock has a bunch of nice clock faces to choose from and is well thought out - it's just missing space for a better mechanism. Vitamins Remixed for HD-1688…
Official KIISU V4B Mockup Devboard (for Case Design) Files include .stl .3mf and .step Don't recommend printing, just use for reference.
Distances made for use with TormekCalc, (by Jan, JVH on Tormek Forum) I made 4 of them, 30, 50, 75, 100 mm in length. If you want to print them with numbers, use split to parts and assign colors, or use as is if you print them solid one…
Charge your phone wirelessly from your headboard without taking up space! Has hooks that fits the Nordli headboards and even has some R and L sides to help you slide it into the charger. Print 2 hooks that attach to the bottom side. You…
Stand for Ikea's Livbojand and Nordmärke wireless chargers. Perfectly fits the Pixel 9, Pixel 9 Pro, Pixel 10 and Pixel 10 Pro.
140x140x25 mm spikes made for a vapor smoothing PvB prints in a round jar Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.3 Filament: Prusament PLA Gravity gray Category: 3D Printer Accessories
I remixed a Mele miniPC holder to add a support bracket for the new SVBony SV241 mini power box and USB hub. The holder can be mounted on any Vixen/Losmandy/flat bar with 2 M6 holes spaced 20 mm. The Mele miniPC is inserted in the slots…
What it is A compact two‑point vise for Vixen dovetail rails. Top face has 2× M4 holes at 20 mm spacing for small boxes and controllers. It clamps. Tested on Omegon ProRC 6" Carbon with doubled stock Vixen rail (up&bottom). Should fit…
I wanted to use the new iOS StandBy clock mode, but the IKEA LIVBOJ charger is designed to lie flat. So I designed this simple vertical stand that holds the LIVBOJ securely in an upright position. The result: Your iPhone charges…
Coaster with the BVB 09 Logo: Dimensions: Diameter 100 mm Perfect for protecting surfaces and showcasing your Borussia Dortmund pride!
A Bahtinov mask to fit over the Svbony sv555 telescope dew shield. It has a low factor with relatively wide spacing to make it easy to print.
Added extension for iPhone 13 mini. Otherwise same as original Print Settings Supports: No Category: Mobile Phone
As an iPhone 11 user, I lacked the option of charging the smartphone at night with a Magsafe connection. It was only by chance that I saw that I can also activate standby mode with the iPhone 11. So I developed a wall mount for my…
This plate was generated from different svg templates and mainly reworked on CorelDraw!, then exportes as svg and imported in TinkerCad, cut out, joined, finished and exported as individual stl-files, which YOU can drag into your slicer…
Ikea Livboj charger station, thickness optimised for Galaxy S20FE OEM Case
